I am so not in for this, it will still look arguably better then MP-01. But the true MP Optimus Prime is MP-10. This new one is all about animation, and the backpack is pretty huge. MP-10 has a built in part for weapon storage... it was not actually needed. Idk about this new direction. I’ve been pretty much exclusively 3rd party and older MP’s. This new style of lavishly G1 animation is not for me. MP-10 was the standard and the perfect blend. For whatever reason Takara is/has been pushing a new direction that a good majority don’t really want to go in on. See Transformers 3rd party market. If there wasn’t a itch that needed scratching it wouldn’t exist.
Hot Rod was then summoned to Earth by Optimus Prime, as revealed in The Transformers: Escalation. With typical bravado Hot Rod and Hardhead insisted on heading to assist Prime's unit in stopping Megatron. Hot Rod left Hardhead to assist the other Autobots while he captured the Decepticon facsimile. Unfortunately, he almost collided with Prowl, who had had the same idea. Despite some bickering between the two, they were able to eventually capture the facsimile, forcing the Russian troops to back down. When Hot Rod heard the battle between the Ore-13 powered Megatron and the rest of Prime's troops, Prowl forbade him from interfering, entrusting him with the safe return of the facsimile. Calling Nightbeat for transport out, he was jumped and severely damaged by Skywarp and Thundercracker. Nightbeat teleported him away, but Hot Rod had been badly damaged, and the facsimile reportedly killed.
Optimus made his way to the Primal Basilica, where he found Perceptor standing over the Mistress of Flame's battered corpse. Unable to do anything for her, Prime activated the Basilica's defenses as a means of stalling Trypticon. Learning from Perceptor that Rodimus had given up the Matrix, the two entered the chamber of the Chorus of the Primes to have the Matrix returned to him. Desperate Actions However, Optimus revealed the Matrix was not for him, but rather for Perceptor, as he wanted to make sure it would be taken as far away from Trypticon's grasp as possible. He guided Perceptor to a secret exit from the Basilica and sent the scientist on his way. Run for Our Lives Warned by the Chorus to "beware the power of the Primes", Optimus charged back towards the battlefield and began attacking Trypticon, rescuing Victorion. Optimus led the Combiners in battle against Trypticon, but the Titan managed to hit him, sending him hurtling towards some sharp rubble. Thankfully, he was caught at the last moment by Fortress Maximus. In Good Hands
Prime was perpetually at the forefront of the action throughout the early years of the war on Earth, usually confronting Megatron, though in some rare instances, such as against the Insecticon-controlled Decepticons or the Combaticons, teaming up with him for the greater good. He has suffered his fair share of battlefield scrapes, almost meeting his end when his vital cosmotron component was critically damaged by the Decepticon jets and when Laserbeak had his body disassembled and turned into Decepticon trophies, such as a pet "alligaticon" and a defense laser.
In a break from tradition, Energon Optimus Prime's large mode resembled a configuration similar to Voltron or to the Super Sentai action figures. This design was unpopular with many fans due to design issues with the toy. The small robot's body was large in proportion to his arms and legs which made the figure appear fat, earning it the nickname "Fatimus Prime" or "Obese-imus Prime". The 4 vehicles that combined with the robot were small, lacking the intricate detail that made other toys in the line popular. Fans were also angered by early releases of this toy in which the head was molded with a mouth rather than the traditional face plate design. Later releases of the toy eliminated the visible mouth feature.
If Cosmos radioed his findings to Optimus immediately, Optimus’s convoy moved in to investigate a nearby Decepticon base. En route, the Autobots passed near a human town, but began floating in mid-air before being able to reach it. Optimus quickly deduced that this phenomenon was caused by an anti-gravity beam, courtesy of the Decepticons. Worried about the nearby humans also being affected by the lapse in gravity, Optimus had to decide whether he would order his troops to stop and help the townspeople, or to continue forward and attack the Decepticon base.
During the May 30 launch event for the Revenge of the Fallen toyline in Japan, Legends Optimus were given out to attendees. The only difference is a sticker on the packaging commemorating the event. Optimus also saw release as a blindpacked figure for the first wave of the Revenge of the Fallen EZ Collection sets. And like all first waves, he comes with a flyer advertising the TakaraTomy releases of the Revenge of the Fallen toyline. His pair of legs is also mistranformed to fit in the bubble.
The new One-Step Optimus Prime toy transforms from a trailer truck into a robot in just one easy step! The toy features a similar transformation to the other One-Step Optimus Prime and One-Step Changer Movie Hound. The figure is only available as a "Special Edition Figure" in a 6-pack with the One-Step figures of Bumblebee, Steeljaw, Grimlock, Sideswipe, and Underbite, all of which are unchanged from their individual releases. This set was exclusive to Target stores in the United States and to Toys"R"Us stores in Canada.
If Powerglide did not heed Optimus orders, he indadvertedly caused the water supply to be poisoned anyways. If however, Powerglide listened to Optimus’s orders, the Autobots attempted to lure the Decepticons away from the reservoir and into some nearby woods, where the Autobots would have some cover against the Decepticons. Finding themselves under heavy fire before they could reach the treeline, the Autobots were forced to fight back in the open. With Autobots falling beside him, Optimus gritted his teeth and took careful aim at the poison containers the Decepticons were carrying. After taking out both of the planes carrying the poison, Optimus continued to battle Megatron and his Decepticons until nightfall, until the Autobots were finally victorious.

This incarnation of Optimus Prime first appeared in the Transformers: Universe comic series in issue #2. As part of Omega Prime, he was escaping with various other Transformers from Unicron. He appeared again at the end of issue #3, brought in to Alpha Trion's lab to aid Optimus Primal. After this, both Prime and Magnus became part of Optimus Primal's army of Autobots, battling against Unicron's Decepticons.
Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.

Great read. I have noticed an absolute drop in quality myself. My sets in my youth range from 83 to 90. My sons are from 2011 and there is a clear distinction. Aside from the weight of identical bricks being different, the older bricks stay together in a much more durable way than the new bricks. To test this, I created the same models using all old bricks and all new bricks and the difference was marked. I understand doing certain things to reduce costs, but not at the expense of quality…
A redeco of Legends Optimus Prime replacing his red plastic with more blue and silver, but sprucing things up a bit with red flame paint operations. Defender Optimus Prime (ディフェンダーオプティマスプライム) was only available in Japan as part of their Transformers Animated promotion in March 2010. It was given away for free to customers who purchased Animated merchandise at Edion, Bic Camera and Yodobashi Camera stores.

Unlike the other Swordbot toys, Optimus Exprime's kabuto helmets form an integral part of one of his alternate modes. The kabuto helmet designed for use with his DaiGekisou combination forms the head of his dragon form, while the kabuto helmet designed for use with his DaiKenzan combination forms the "tail" of the same. He comes with two HUGE swords (with 5mm handles) which can be attached to several places on his kabuto helmets or either alternate form, held separately in his hands, or held both in the same hand (with one held in reverse-grip).
Prime: First Edition Matrix of Leadership Optimus Prime converts from robot mode to his truck mode. He comes with a gun than he can wield with his hands, as well as peg onto his hitch in vehicle mode, with different pegs for either configuration. Similar to a previous Optimus Prime toy, he features some faux-kibble in the form of his actual windshield chest being covered by sculpted panels featuring his characteristic windshield-chest. His arms are slightly longer than his original design's arms.
In the aftermath, Victorion believed trying to find the Requiem Blaster was a fool's errand, and that they should have been preparing Optimus Prime's funeral instead. The Swamp Megatron often thought of Optimus, noting the similarities between him and Optimus Primal Primal and wondering what his old rival would think of his heroic exploits. Consequences Ultimately, thanks to his connection to the Matrix and the Primes, Optimus's spark was freed from the Well and revived after Megatronus's defeat, to the joy of his companions. Mourning the sacrifice of Megatron, whom he considered a brother, he commended Optimal Optimus for being a fine choice as the new Matrix-bearer, and began teaching him the ways of Cybertron, promising to support him in his new leadership role. Saga's End
Optimus Prime (formerly Orion Pax) is constantly, if not always depicted as having strong moral character, excellent leadership, and sound decision-making skills, and possesses brilliant military tactics, powerful martial arts, and advanced extraterrestrial weaponry. Optimus Prime has a strong sense of honor and justice, being dedicated to building peaceful and mutually beneficial co-existence with humans, the protection of life and liberty of all sentient species.[2] As the current Matrix of Leadership bearer, Optimus Prime is the de facto leader of the Autobots, a faction of a transforming species of synthetic intelligence from the planet Cybertron. The Autobots are constantly waging civil war against a rival faction of transforming robots called Decepticons. According to Bob Budiansky, co-writer of the Transformers series, Dennis O'Neil was responsible for his name.
In an alternate version of this reality, Rodimus was forced to deal with a militant and aggressive Optimus Prime, and Cybertron was soon wracked by a three-way war between Optimus' Autobots, Rodimus' Omnicons, and Megatron's Decepticons. Unfortunately, the balance of the conflict tipped with the arrival of dimension-hopping tyrant Megazarak, whose Destructicons allied with the Decepticons, creating a force that soon annihilated Autobot and Omnicon alike. However, the Destructicons then turned upon their allies and destroyed them before being abducted by Unicron. This universe was then drained of all life and energy by Tornedron, whose creator Primacron was also destroyed.
This redeco of Henkei Convoy is cast almost entirely in translucent colored plastic. Also known by the nickname "Crystal Convoy" among fans, it was first released as an exclusive for the Japanese convention Tokyo Toy Fair 2008, limited to 1000 pieces at the event, but was later made available through e-HOBBY. It was sold in a monochrome-blue version of Henkei Convoy's regular packaging.
On the battlefield, there are few who rival Optimus Prime's prowess. He is easily the strongest of any Autobot his size, and his ion blaster and energon-axe are deadly weapons. He would sacrifice his life to protect his fellow Autobots or those under their care and does so on a regular basis. His compassion for other sentient beings is his only real weakness, and one the Decepticons have taken advantage of time and again... though it's also the source of his strength!
Part of the fifth wave of 2012-onwards Generations Deluxe Class toys, Thrilling 30 Orion Pax is a new mold with a robot mode inspired by Guido Guidi's design for the character, originally seen in Spotlight: Blurr. Some liberties have been taken with the original concept to facilitate his truck mode, which is a new design not based on the Guidi art. He comes with his Ion Blaster and an Energon Axe with a transparent red-orange blade, both of which can peg onto 5mm ports on his hands and vehicle rear sides. Although not depicted on the instructions, the Ion Blaster can also peg into the hole in the larger blade of the Energon Axe.
The Hasbro stock photos of the toy is slightly mistransformed: his pectoral armor is not folded correctly in robot mode. At least a very small number of units feature a faceplate-less head sculpt which was probably intended for a later retool, but so far there is no news about this pretool being released in the future. This figure was also released in Toys R Us Japan in May 1st, 2017 as a store exclusive, likewise identical to the Hasbro release.
An absolutely incredible 28 seasons in, The Simpsons writers and producers have had to be unbelievably creative in coming up with a new couch gag for more than 600 episodes. They’ve had a doppleganger Simpsons family walk in on the family, the whole town has absurdly squeezed into their living room, and we’ve toured the inner workings of Homer’s body.
He reappeared in the third crossover, where he apparently acted as Optimus Prime's right-hand man. Putting a team together to look for the missing team that had journeyed to Earth (who had been captured by Serpentor and the Decepticons), he would later lead the combined G.I. Joe/Autobot force that rescued Optimus Prime. In contrast to his usual "youthful rookie" portrayal here Hot Rod seems to be in a high command position, outranking Ultra Magnus, Prowl and Ironhide among others. However, by the fourth crossover Hot Rod is forced to wait on Cybertron under Magnus's command as Optimus Prime journeys to Earth.
This miniature model kit of Energon Optimus Prime comes unassembled and unpainted, moulded mainly from white, red and black plastic and featuring some stickers for essential detail. Standing at around 4.5 inches tall, he comes with his Prime Force drones and can combine with them in the usual ways; while Fire-1, Gyro-2 and Digger-3 are moulded in their normal colours, Submarine-4 is stuck being black, and like every other non-color-molded, non-stickered detail on the kit, must be painted by the buyer. Prime's transformation involves removing his feet and head (an alternate Super Mode head is included, as his antenna does not transform into a helmet), and he does not come with a trailer for the Prime Force, but his gun can shoot small orange plastic BBs via a pressure-launching mechanism, and he comes with a small gold-chromed Energon star that fits onto his left shoulder. The kit also comes with "Episode 1" of the "Optimus Prime VS Scourge" mini-comic, printed on the back of the instructions.
For this re-release of Masterpiece Convoy, Takara submitted to the biggest desire fans had for the figure and produced a full-size, fully transforming plastic and die-cast metal trailer. The trailer opens up into Convoy's Combat Deck, with storage for its accessories and a functional repair drone, though Roller is conspicuous by its absence. Like the original Combat Deck, the drone can extend through holes in the roof and front of the closed trailer, and the interior has enough room to accommodate one Alternators figure in vehicle mode. Some reports suggest that the paint on this figure's chest chips more easily than past editions.

LEGO has changed a lot in its history. It started as a wooden toy company before it discovered the benefits of molded plastic. Since the advent of the brick, we have been able to build everything from houses, to spaceships, to working robots. The increased detail and wider product line has allowed for the blossoming of the idea of LEGO as an art medium7. LEGO bricks walk the line between giving people more pieces that can be used to add detail and restricting the pieces to inspire creativity. There is a balance that can be seen through the amazing works, both large and small, that can be done with a bit of patience and an eye for plastic.


A Japan-exclusive release of the Voyager Class figure with a trailer and a different Mech Tech weapon. The trailer opens like the original G1 toy and fits up to two Deluxe Class vehicles of the same toy line. In addition, the trailer can hold over 20 Mech Tech weapons. The supplied Mech Tech weapon is a blaster with a retractable blade designed similarly to Optimus' forearm swords.[123]
Our Deal of the Day features hand-picked daily deals with low prices on top electronic products, video games, tools, items for your kitchen and home, sporting goods, computer software, and more. Every day you will see our Lightning Deals displaying limited-time deals at great prices; make sure you buy quickly because these deals will go away fast. Our other Savings and Sales include hundreds of items throughout Amazon to pique your interest for savings on HDTVs; movies or TV shows; fashion items like clothing, jewelry, and watches; toys; and magazines. Come back often as our deals update daily.
When the long-lost Titan Masters reemerged into modern society and joined the Autobot-Decepticon war, Optimus Prime was partnered with the Titan Master Apex, who carried a portion of Prime's spark, boosting the legendary commander's already formidable abilities. Titans Return Apex/Powermaster Optimus Prime toy bio On Velocitron, Optimus Prime was present for the biggest race of the year when Scourge and Crashbash arrived and attempted to botnap Hyperfire. Optimus ordered Sentinel Prime and Hardhead to battle against them. Later, Optimus was part of a battle on Cybertron against Soundwave. During the battle, the Autobots' base Fortress Maximus transformed to thwart the Decepticon advance. Optimus Prime declared that to defeat the Decepticons, the Autobots would need to master the power of the Titan Masters. Titans Return: The Power of the Titan Masters
This version of Optimus is a redeco of the original Legion Class Optimus Prime toy, featuring additional paint details. He features an Autobot insignia on his faux chest. His head was not entirely clipped down in his stock photos. The stock photos shows him having darker plastics & silver paint as opposed to the final product. This seems to have been a trick of the lighting, as the released toy remained its standard plastic colors & silver paint apps.
The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot[3]. The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.
When Vector Prime reminisced on some of the highlights of his multiversal career, he remembered many events involving Optimus Prime. Among these events was Optimus Prime using the Matrix of Leadership on the Hate Plague, Shockwave taunting a disembodied Optimus Prime, and Megatron firing on the head of Optimus Prime, creating a time storm that necessitated Vector Prime's intervention to ensure Optimus Prime's survival. Vector Prime: In the Beginning
For its release in Korea, Hasbro Asia provided a collector coin featuring truck-mode Optimus Prime on one side and "MP-01L" on the other. The coin came mounted on a card featuring lineart of the Autobot leader's head, the stark black design of which could be mistaken for promoting the earlier "Sleep Mode" release. The limited release (and general lack of enthusiasm for the collector coins in Korea) makes this one of the more difficult Masterpiece coins to find.
Classics Optimus Prime was initially intended to be Deluxe-sized. An alleged list of the tentative Classics line-up[20] included a Deluxe-sized Optimus Prime without a trailer and a version with a trailer at the Voyager price point; however, it appears the decision was eventually made to upscale Optimus to Voyager size instead.[21] Don Figueroa's control drawings for the Deluxe version were leaked before the Classics line was even released at retail.[22] A gray model prototype was later shown as part of an interview with TakaraTomy's staff in Transformers Generations 2009 vol. 1.[23] It's unclear whether the trailer ever made it past the early planning stage before the size of the figure was changed.
A Voyager-class two pack of Classics Optimus Prime, representing the Generation 1 version of the character, and a redeco of Age of Extinction Evasion Optimus Prime representing the Movie character (The deco patterns is most likely to emulate the character's design in 2007, with vague results). Like Rusty Optimus Prime (seen below), he features flames on his vehicle mode doors.
For accessories, he comes with (according to his bio) "the ancient weapons of the Primes", such as his Nexus Sword (a reference to Nexus Prime), the Vector Shield (an upscaled, non-transforming version of the shield from his Cyberverse "Beast Blade" toy, and a reference to Vector Prime), as well as a generic cannon with a pressure-fired missile. All of his accessories can peg into his hands, right forearm, backside, and vehicle sides.
Once again Optimus Prime and Megatron were re-engineered, with Prime now a fire truck and Megatron a six changer, whose modes included a dragon, bat, jet, land-craft and a giant hand. Another G1 character to get a new toy for this line was Ultra Magnus, who could combine with Optimus Prime to form Omega Prime. Other combiners were created for the series too, such as Landfill and Rail Racer. Bruticus, a combiner from G1 was also recoloured and introduced into the series, with a coinciding toy re-release. The Combaticons that formed Bruticus were the first of the Decepticons to be introduced into the show along with Scourge, who as a toy was a black repaint of G2 Laser Prime. These were not the only toys to be re-released for this series, with many from past lines being repainted and packaged in RID boxes. Robots In Disguise was responsible for introducing a lot of concepts that would be re-used often in the next incarnations of Transformers.
Optimus suffers from a design flaw that many other Voyager Class figures in the Combiner Wars line experience: the detents, or "click points", on the heavily-ratcheted outward motion of his hips (which also form the hips of his torso mode) are few in number and very far apart. As a result, Prime's legs have great difficulty assuming the natural "A-stance" formation that the angled design of his foot sculpt seems to have been meant to accommodate. Likewise, when forming the torso of Ultra Prime, the interactions of the knee-lock mechanism and the hip detents almost always force Ultra Prime's legs into either an awkwardly knock-kneed arrangement or an equally awkward, and often unstable, bow-legged posture (as seen in the image to the right) that prevents Ultra Prime from standing flat-footed. Unlike Motormaster, this version of Optimus was the only one to not receive the improved hip ratchets implemented in its future releases in some shape or form by Hasbro, though they would be used for the Battle Core redeco later in the line. However, there are third party ratchet replacements for the hips.
Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[11] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
Released by TakaraTomy as part of a 2010 promotion honoring the "future era" of the original cartoon (which was set in 2010 in Japanese continuity, you see!), this exceptionally morbid re-release of the Masterpiece Convoy figure recolors the Autobot leader in blacks and greys, representing his dead body from The Transformers: The Movie—but don't worry, kids, it's actually a "sleep mode", according to the figure's name! Limited to 2010 pieces in Japan (see what they did there?), it comes with all its customary accessories, including the Perfect Edition trailer, redecoed where appropriate: the trailer itself has become translucent, its energon-axe is now transparent grey, and Megatron, in another movie homage, is rendered in translucent purple, evoking the scene depicting his transformation into Galvatron. The figure was also released in other parts of Asia as a limited edition of 2010 as well, combined with the Japanese edition for 4020 total. The Japanese version denotes "Serial Number in Japan: ####/2010" on its bio card with the number out of 2010, while the Asian version denotes "C1 - ####/2010" with the number out of 2010 on its bio card.

His original trailer is not included with the set; instead, he comes with a new deluxe-scaled trailer, not available with any other figure, based on the one towed by Prime in Dark of the Moon. The trailer is compatible with both figures, and sports 5mm post-holes that will hold (among many other things) G1 Prime's laser rifle and the MechTech weapon Movie Prime is armed with.


On a mission with the Triggerbots to stop Megatron from claiming the Underbase, Prime was forced to jettison the massive databank into space to prevent anyone from acquiring its power. With this action, he proved his wisdom and skill to the Autobot Council of Elders. He continued to move up in rank, eventually becoming the field command over the Autobot armies.
The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot.[16] The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.
A limited edition of the Optimus Prime toy sold as a mail-away exclusive by PepsiCo was made available in North America in 1985. This version of the figure came with a small fold-out leaflet glued to the top-right of the packaging, which contained two Pepsi logo stickers for the buyer to attach to Prime, mid-way through the traditional silver-and-blue stripe on his trailer. Canada also got a version of this promotional figure, but with much larger stickers that were the full length and height of the trailer. This promotion would go on to serve as the inspiration for the Japanese character of Pepsi Convoy, who would in turn be released by Hasbro as a new "Pepsi Optimus Prime" in 2007.
×