The styling is a little blocky, but these are toys aimed at a younger audience that actually wants to play with their Transformers. They don’t need 45 step transformations that result in perfect representations of what they see on screen. They want something that they can switch quickly between modes and that have added play potential, with power-up engines that unlock special features.
If Optimus went along with Perceptor’s plan, he sent out Sparkplug to fetch the Autobots’ secret stash of emergency fuel. Putting all of his faith in the Autobot scientist to uncover a cure swiftly, Optimus attempted to comfort his troops as they all began to experience sickness pains. Then, Red Alert informed Optimus of a Decepticon attack force moving in on their position, prompting Optimus to ask Perceptor to dispense whatever cure he had been able to concoct, despite it being untested. Perceptor suggested another course of action to Optimus; the tainted fuel the Autobots had left untouched could be used to create a poisonous smog if lit aflame. The Autobots could attempt to poison the Decepticons with their own concoction, or they could risk the untested antidote, despite whatever side-effects it may have.
The morning after a particularly vicious battle, Optimus listened to birdsong and pondered life as a giant robot, before asking Ratchet and Huffer for a damage report. The Autobots were puzzled when the Decepticon Seekers (and Laserbeak and Buzzsaw) did a flyby on their camp, as the Decepticons were similarly damaged after the battle, but Shooting Star reported that the Decepticons were trying to distract them while an attempt was made to secure a broken-down oil truck a few miles away. Optimus took a small group to investigate, and successfully aided the humans in getting their truck moving. Swoop was instrumental in stopping the Decepticon attack, and Optimus commended the Dinobot for his valor. Decepticon Hijack
Once again Optimus Prime and Megatron were re-engineered, with Prime now a fire truck and Megatron a six changer, whose modes included a dragon, bat, jet, land-craft and a giant hand. Another G1 character to get a new toy for this line was Ultra Magnus, who could combine with Optimus Prime to form Omega Prime. Other combiners were created for the series too, such as Landfill and Rail Racer. Bruticus, a combiner from G1 was also recoloured and introduced into the series, with a coinciding toy re-release. The Combaticons that formed Bruticus were the first of the Decepticons to be introduced into the show along with Scourge, who as a toy was a black repaint of G2 Laser Prime. These were not the only toys to be re-released for this series, with many from past lines being repainted and packaged in RID boxes. Robots In Disguise was responsible for introducing a lot of concepts that would be re-used often in the next incarnations of Transformers.

The instruction manual for the MP-04S Convoy Sleep Version reveals a hidden message saying that Rodimus will be the next installment in the Masterpiece series. Concept sketches of the figure were released online in July 2010. The figure is a faithful modern recreation of the original G1 toy. Gimmicks include retractable binoculars, spinning saw blade and the Matrix of Leadership, but the figure's main feature is the ability to transform into both Hot Rod and Rodimus Prime. The transition between the two incarnations involves rotating the face, extending the legs and adjusting the spoiler on the back.

The TakaraTomy version, part of the seventh wave of Japanese Prime toys, is dubbed Arms Master Optimus, uses darker, metallic plastics, casts the backs of his thighs in metallic red, replaces his metallic silver paint with glossy gray, and replaces a few of his paint operations with customer-applied foil stickers, such as his insignias, shins, headlamps, the tiny yellow lights on his torso, and the blue deco on his truck panel sides. He has also been retooled with additional 5mm pegs for his thighs, roof, and lower backpack, as well as ports for his forearms, shoulders, smokestacks, fuel tanks, and roof. Instead of the rifle, he comes with a very large Matrix which can tab onto his chest as armor or mount onto the back of the truck cab, with the Matrix also being covered in 5mm posts and holes so that Arms Microns can be attached to it. He additionally comes with a clear-blue "Shining" version of the Arms Micron, R.A., who can combine with the Matrix to form the colossal Matrix Saber.

The styling is a little blocky, but these are toys aimed at a younger audience that actually wants to play with their Transformers. They don’t need 45 step transformations that result in perfect representations of what they see on screen. They want something that they can switch quickly between modes and that have added play potential, with power-up engines that unlock special features.
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.

A redeco of Legends Optimus Prime replacing his red plastic with more blue and silver, but sprucing things up a bit with red flame paint operations. Defender Optimus Prime (ディフェンダーオプティマスプライム) was only available in Japan as part of their Transformers Animated promotion in March 2010. It was given away for free to customers who purchased Animated merchandise at Edion, Bic Camera and Yodobashi Camera stores.
The first Cybertron Optimus Prime toy transforms into a heavily-armed fire truck of made up origin, topped with two large cannons. The left fires a spring-loaded translucent blue missile, while the right features electronic sound effects and a flashing red LED. The cannons and the sides of the truck fold down to create an unlikely flight mode for the vehicle.
Part of the first wave of Mini-Con Battle Pack figures, this Optimus Prime figure is a new mold, about the size of a Scout Class figure (In Optimus' case, the size of Cyberverse Commander figure), and scaled with Legion Class figures. Its transformation scheme also takes some cues from the Legion Class figure. Battle Pack Optimus Prime also features a transparent orange battle axe & armor pieces, although the chest armor/flip-up mask piece is needed to be assembled first. The included pieces can be combined into a clawed battle axe, or attached to his body to form his armor (although the flip-up mask can restrict his head articulation). Optimus Prime can totally wield the axe dual-handed. As an undocumented feature, the axe can be stored on his truck mode with the tab featured on Prime's right shoulder.
Animated Optimus Prime, in an Earth-based fire truck mode, appears as a hidden character in the Transformers Netjet video game by Hasbro. Instead of being leader of the Autobots, Prime was actually a washout from the Elite Guard. Despite no longer being a member, he maintains his military ranking of "Prime". The scale chart released for the series indicates Optimus Prime stands about 22 feet tall.[13]
In light of this news, if Optimus decided to nonetheless head back directly to Autobot headquarters, his squad returned to find their comrades nearly dead from the poison. But with Ratchet’s help, the antidote was quickly distributed, and the Autobots sprung back to life. Now cured, the Autobots discussed their next course of action; they had to prevent the Decepticons from poisoning the nearby water reservoir.
Revenge of the Fallen Legends class Optimus Prime is an all-new, much more accurate mold compared to the 2007 Legends class Prime, having a much greater accuracy in both robot and vehicle mode. In particular, his vehicle mode isn't inexplicably missing one smokestack like the 2007 toy. It should be noted that he was molded in only one paintable plastic color, with red and blue deco patterns decked on it. The top of the truck's bunk (ending up on his back in robot mode) has a slot to combine with Jetfire. For some reason, this isn't mentioned in the instructions, though they're hardly needed.
Rounding out a bumper year of Japanese-exclusive Generation 1 Optimus Primes, the Takara-licensed Kawada brand Diablock Convoy is a fully transformable Lego-style block building figure similar in premise to the earlier American Built to Rule sets. The Diablock figure, however, easily outstrips the Built to Rule sets by both being an accurate representation of the toy on which it is based, and being able to transform between modes without having to be partially disassembled and put back together first.
The first Nightwatch Optimus Prime is an extensive redeco of the previously released Leader-class Optimus Prime, replacing most of his red and blue with different shades of blue and black. In fact, he resembles the original Diaclone Powered Convoy color scheme of Generation One Ultra Magnus's truck cab. The previously blue and red flames have been replaced with silver flames, as has various other decos, replaced by copper.
The two sides found themselves equally matched until the Constructicons merged into The Devastator. The tables were turned once more when the Dinobots appeared, and mercilessly slaughtered the Constructicons. The Decepticons' plan foiled, Optimus decided that the Autobot-Decepticon war had come to an end, despite Megatron's protests to the contrary. He and his Autobots then drove away victorious. Battle for Earth
"Special Edition" Optimus Prime is a redeco of the Classics multi-pack toy, featuring some minor paint detail changes, bluer translucent plastic, darker and cooler gray plastic, and darker metallic flake red and blue plastic, with his (previously black-only) rifle body most notably now being cast in both blue and black plastic. He came in special "book box" style packaging with black-and-white boxart, and was only available at retail in Australian and Asian markets. North American customers could later buy him via Hasbro Toy Shop.
If Optimus instead followed Prowl’s plan, he instructed his troops to transform into vehicle mode and play dead. The Decepticons, believing the Autobots’ ruse, disarmed themselves in order to carry out the Autobots’ “carcasses.” Now with the element of surprise against unarmed opponent, the Autobots Transformed and were able to easily defeat the evil robots.
Through the years, there have been many action figures made in the likeness of the original incarnation of Optimus Prime, some of which have been featured in fiction, others of which have not. Additionally, some toy makers have made unlicensed toys in his image or accessories for the existing toys. The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[23] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the Transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original Transformers toy line.
Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[50] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
Battle Blades Optimus Prime is a brand new sculpt that attempts to replicate his Leader Class design. He is much more movie accurate than the previous Voyager incarnations. He features two energon swords made of soft plastic, similar to his Leader Class incarnation, albeit not spring-loaded. They can be detached from the mushroom joints they're on, although doing this excessively may cause them to warp.
This figure is an exclusive to San Diego Comic-Con 2011. The toy comes in a packaging shaped like the Matrix of Leadership, which one could wear around their neck, preferably at the convention itself, so passers-by can exclaim "WHERE THE HELL DID YOU GET THAT?" and then try to get one themselves. The Matrix itself comes packaged in a box that is designed to look like Optimus Prime's chest, and opens accordingly. The chest window doors are sealed with a round magnet.
Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
Available exclusively through e-Hobby, this black and teal repaint of Hybrid Style Convoy features the traditional "Nemesis Prime" color scheme, but represents a version of Optimus Prime himself. In addition to all the original accessories, the toys also includes several more deliciously metatextual goodies, themed around the Generation 2 toy and comics: two new large guns patterned after the new weapons wielded by the Generation 2 Optimus Prime toy, and two additional (blue) Prime heads that can be swapped with the figure's regular noggin, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger. One head is pristine, the other decorated to match the battle damage seen on the cover of the first Generation 2 issue.
It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.
For some reason: unlike the stock photos (pictured from the right), This Custom Kreon had a slight QC issue to the opaque and transparent helmets: One had two sides sculpted, while the other one has the small flat square sculpt (similar to the details on Hound's helmet) on the right side. Several samples had two different "variants": One with the perfect transparent helmet & a differently-sculpted opaque helmet, while the other one has the opposite. However: later releases fixes the problem by a running change.
Part of the first wave of TakaraTomy Go! toys, Hunter Optimus Prime is a redeco of the Voyager Class Beast Hunters Optimus Prime toy. His red and blue plastics are now cast in metallic shades, his translucent green plastic has been replaced with translucent blue, his yellow highlights are more orange-yellow, his yellow-painted side windows are now blue, and his gray plastic is now cast in two different, darker shades. The Matrix Saber, aside from being blue, uses a bluer shade of gunmetal paint for its hilt and handle.
During the May 30 launch event for the Revenge of the Fallen toyline in Japan, Legends Optimus were given out to attendees. The only difference is a sticker on the packaging commemorating the event. Optimus also saw release as a blindpacked figure for the first wave of the Revenge of the Fallen EZ Collection sets. And like all first waves, he comes with a flyer advertising the TakaraTomy releases of the Revenge of the Fallen toyline. His pair of legs is also mistranformed to fit in the bubble.
Based upon the "Protoform" (Cybertronian) appearances of the Transformers in the Movie, Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. A flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail. The bottom of the vehicle has small wheels to roll the toy across smooth surfaces. Oddly, it has NO automorph gimmick at all, a feature most main-line figures have.
The back story of the Transformers on ancient Cybertron is told in Transformers: Defiance. In this story, Starscream returns to Cybertron after encountering an enemy scout ship in the Eshems Nebula. After being repaired for minor damage by Ratchet, Starscream and Ironhide report to Optimus Prime and Megatron.[63] In issue #2, Optimus Prime is ordered by Megatron to counter-attack Cybertron's invaders, but instead, Optimus organizes a resistance to Megatron's decision. In issue #3, Optimus Prime, Jazz, and Prowl break into Megatron's quarters while he is away looking for clues to why he is acting so strangely. What they find is an ancient artifact that Megatron had restored.[64]
In "Decepticon Air", Optimus receives a secret distress call from the Elite Guard ship that is carrying Decepticon prisoners. During the flight, the ship enters an electrical storm, which revives an inactive Swindle and he frees other prisoners to take over the ship. Transwarping to the ship via Swindle's personal transport field, Optimus joins forces with the Elite Guard, rounding up most of the Decepticons in the end.
One more thought: LEGO is a Danish company. The fluctuations in the price of LEGO such as the big bump around 1985-7 in Figures 1 and 2 could be because of a change in exchange rates. The conversion rate between the Danish Kronor and the US$ went from over 10 in 83 and 84 to less than 7 in 86 and 87. LEGO might have been slow to respond to changes in exchange rates, leading to the temporary bump. If you’d like to share data we can redo your graphs in DKK.
One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
Produced as an action figure by the Japanese company Kaiyodo, the main selling point of the line is the 'Revolver' joint. This gives the figure a high degree of articulation, allowing for many dynamic and varied poses. Hot Rodimus is number 047 in the Yamaguchi series, and comes with extra sets of hands, a pair of pistols, an extra head (which is molded with his binocular vision, as seen in The Transformers: The Movie) and a display stand.
Both Jet Power Optimus Prime and the accompanying redeco of Voyager-Class Revenge of the Fallen Megatron would have come with an issue of the Unite for the Universe comic book, but due to the cancellation of both figures, the comics were eventually included with the Movie Masterpiece releases of Leader-Class Starscream and Bumblebee. Of amusement is the fact the comics are essentially showcasing toys that have been canceled.

For Universe, a redeco of the Armada Super-Con Optimus Prime in more Generation 1-inspired colors was released in a Sam's Club exclusive five-pack alongside Runamuck, Longrack, Buzzsaw, and Blurr. Optimus was the only toy in the set different from the original releases. He came with a translucent red version of the remolded style of Cyber Key previously included with this mold's release during the Cybertron line, featuring a Powerlinx port to activate his punching gimmick.
Near the end of the series, in what is generally regarded by fans to be his most impressive feat, Optimus Prime takes on Galvatron without combining with any other transformer. Traditionally, throughout the three series and RiD, Optimus Prime has been shown to be physically weaker than Galvatron. At the end of the intense fight, Galvatron proved stronger than Prime, but Prime managed to destroy Galvatron with Vector Prime's sword.
I mean you could argue that they are returning to the way the original Transformer toys worked. Here is an example of the OG Optimus toy. I went to Hasbro's website to see what the most current version of Optimus is that they are selling and I found this. That actually looks surprisingly similar, though I would argue they have gone more of the direction of making the robot look more robotic and the truck a little less truck like but its still a solid middle ground.

Released in the first wave of the Authentics toyline, "Autobot Optimus Prime" is a new mold the size of a 2015 Robots in Disguise Battle Pack toy. He changes from an evergreen-inspired robot into a more G1-based truck in just four steps. His instructions are incorrect; for truck mode, his legs must be folded in before the arms, otherwise the locking tabs on the arms will get in the way. Due to his transformation, he ends up with no elbows and a fake chest. He also has problems standing up due to hollow legs.
Ultra Magnus's legendary status was exceeded only by the legendary status of Optimus Prime. Combiner Wars Ultra Magnus toy bio Upgraded with the power of combination, Optimus could combine with any bots to form Ultra Prime. Combiner Wars Optimus Prime toy bio With mastery over the power of Combiners, the combined courage of Optimus and the Autobots would stop the Decepticon Combiners threatening cities and entire civilizations. Combiner Wars Battle Core Optimus Prime toy bio

This gold-chrome and clear-plastic redeco of the Leader-class Optimus Prime figure was first offered as a prize in a mail-in contest held through TV Magazine alongside a silver chrome version of the same toy (see below). Both figures were later made available again as prizes in a second contest in the September 2005 issue of TV Magazine, together with "Galaxy Convoy Custom Color Version" (again, see below).
For the 1987 and 1988 lines, Hasbro introduced even more radical ideas through new sub-groups. The Headmasters and Targetmasters came with partners who transformed into the figure's head or weapon, respectively. Powermasters, including the new version of fan favorite Optimus Prime, came with partners that transformed into engines. Each line would see various permutations over the two-year span, including smaller Headmasters, Double Targetmasters, and a Powermaster with two engines.
For the Generation 2 toy line, the original Optimus Prime toy was altered somewhat and an electronic sound maker was added.[24] Later Generation 2 toys of Optimus were completely new designs, such as Combat Hero Optimus Prime, Laser Optimus Prime, and Gobot Optimus Prime, who could become a red Lamborghini car. In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film.[25] In 2006, Hasbro introduced Alternators Optimus Prime, which turned into a licensed 1:24 scale model Dodge Ram SRT-10.[26] In 2011, Takara Tomy released MP-10 Convoy, a smaller, more show-accurate version of the Masterpiece Optimus Prime figure.[27]
An exclusive to Amazon.co.jp, this redeco of Optimus Prime is bundled with the Japanese release of the Revenge of the Fallen DVD. He is another in a long line of black repaints, swapping most of his red and blue plastic for black, some of his bright grey plastic for a cool grey and blue, and is covered with gold and silver flames. His orange blades are now translucent blue.

This redeco of the Ginrai tooling of the Powermaster Optimus Prime figure (released concurrently with the 2001 reissue of the Ginrai figure) was a Toys R Us Japan exclusive black repaint, made to represent the original Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' color schemes.
×