As battles between numerous different Primes and Megatrons erupted quite literally all across time and space, another member of the Convoy Aggregate was later seen battling Starscream, who had been empowered by Megatron to serve as leader of his Questors. This Prime was so surprised by Starscream's uncharacteristic sports car alternate mode that he left himself open for a blast from Starscream's Retroactive Nullifer cannon, which erased him from the timestream. As he faded out of existence, Prime responded to Starscream's taunts about the death of the Alternity by telling him that they were already well aware of their prophesied end and were well prepared. Foreshadows
When the legendary Energon Cube was lost to the reaches of space, Optimus Prime led a small team of Autobots in pursuit of it. The giant energy source crashed on Earth in the Japanese town of Hoshinochō, where it shattered into fragments that were scattered far and wide. Prime and the other Autobots set up a subterranean base below the Cube's impact crater and began their search for the shards, taking the forms of local vehicles to hide their activities. Despite their attempts at remaining unseen, glimpses of the Autobots only magnified the reputation the crash of the Cube (believed by humans to be a meteor) had given Hoshinochō: that of a hotbed of rumored alien and UFO activity, Japan's answer to America's Roswell. Kingdom of Giants
The Hot Rod from the future animated movie continuity would also appear. Target: 2006 had Hot Rod, Kup and Blurr timejump from 2006 (specifically partway through the Transformers movie) to 1986 to thwart Galvatron's scheme, under the influence of Unicron; later post-movie stories revealed that Firebolt had died on Earth years before 2007, and Space Pirates had Rodimus Prime briefly reverting to Hot Rod during the Quintesson attack on Autobot City. This Hot Rod also appeared in several of the "Aspects of Evil" stories. Told from the flashbacks of an aged Rodimus Prime, these had Hot Rod come up against some of the greatest Decepticon villains. He accepted the surrender of Scorponok - only to wind up defending him and a human town against the Micromaster Air Strike Patrol: defending Autobot City from a full-scale attack by Shockwave: and being captured and used as a pawn by Megatron to flush out an Autobot spy in his ranks. (Marvel UK #223-227)
Part of the second wave of Warrior class figures, this Deluxe-sized Optimus Prime transforms into a futuristic trailer truck. Due to his simple transformation scheme, he has a faux window chest in robot mode, while the end of the front trailer kibble has extra toes. Optimus Prime also comes with an axe, which was based on the Energon Axe weapon from the War for Cybertron game. Undocumented in the instructions, Prime's axe can store between his trailer, or plug into ports on either of his shoulders. His scannable Autobot insignia is on his robot mode left shoulder and is easily scannable while still in-package.
Movie the Best Nemesis Prime is a redeco of the TakaraTomy exclusive Calibur Optimus Prime figure, with darker paint and plastic, and bright, metallic, purple eyes, and the mark of Quintessa on his face. As for the weapons, the Caliber Axe uses translucent purple plastic instead of orange, and there is more silver at the base of the blade. The Overshield has black replacing the original's silver and purple replacing the original's bronze.
As the number of sets released has increased, the harder it has been for stores to parcel out their shelving space. In order to make more sales, decisions have to be made as to which sets will be carried. Not every store can carry the whole product line (not even all official LEGO stores carry the whole product line). This process will favor the sets that drive sales the most, such as the licensed sets. The traditional boxes of bricks are pushed out of the way for the more profitable lines.
This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.
Transformers: Energon introduced several new concepts to the toy line. Two new sub-groups, the Omnicons and Terrorcons, joined the fray, representing smaller factions of the Autobots and Decepticons respectively. The smaller toys in these sub-groups came with Energon weapons that could be used by the larger Autobots and Decepticons, along with Energon chips that could be fastened to the larger figures to enhance their power. Energon weapons and chips came in a variety of colors of translucent plastic. Many Autobot figures in the line were able to combine with a partner to form a larger robot through the "Powerlinx" process. The Decepticons were designed instead with alternative "attack modes". While no longer the focus of the line, there were several Mini-Con releases in Energon as well.
A Leader class toy that transforms from fire truck to robot. The front end of the fire truck can form a robot resembling Generation 1 Prime, while the rear section can form a battle station or combine with him to form Super Fire Convoy. The rear section has an extending ladder with retractable water cannons and missile launchers. This battery-operated toy features siren sounds and voice samples of Fire Convoy (saying the lines, "Fire!" and "Kyoudai Gattai! Super Fire Convoy!"). Fire Convoy can combine with God Magnus (sold separately) to form God Fire Convoy. This toy was designed by Takara's Hisashi Yuki.
Thanks to fellow Seibertron user, Sabrblade, we have discovered some new in-hand pictures of the forthcoming Transformers Studio Series #38 Voyager Class Transformers Bumblebee Optimus Prime figure! These come couresty of YouTuber TonTon Reviews, presumably as a preview of his next review. For comparison, they have put this new entry into the Studio Series with MP-10 and Takara Tomy's Movie Advanced series "Classics Optimus Prime" (Evasion Mode Optimus Prime). This gives us a good - Read More
Available exclusively from Japanese clothing company A Bathing Ape in 2015, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique deep red color scheme matching the Convoy Reissue BAPE Ver. RED of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
The stickers may not be cut right, my copy has them off-center, they're probably using an 80's type bladed stamp with little QC to rush them out. The cab will not have the stripes applied, those are included on a strip of mylar/foil/whatever silver but you have to measure and cut them to fit. Every KO can be identified easily by these missing stickers in the box. Older releases also had the trailer's stickers separate but those have not been made in some time.
If Optimus instead followed Prowl’s plan, he instructed his troops to transform into vehicle mode and play dead. The Decepticons, believing the Autobots’ ruse, disarmed themselves in order to carry out the Autobots’ “carcasses.” Now with the element of surprise against unarmed opponent, the Autobots Transformed and were able to easily defeat the evil robots.
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
Optimus Prime appears in the Transformers live-action film series as the leader of the Autobots and one of the main protagonists. In the first three films, he is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he gains a first generation-style trailer form before changing into a 2014 Western Star 5700 Concept. Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.
Optimus suffers from a design flaw that many other Voyager Class figures in the Combiner Wars line experience: the detents, or "click points", on the heavily-ratcheted outward motion of his hips (which also form the hips of his torso mode) are few in number and very far apart. As a result, Prime's legs have great difficulty assuming the natural "A-stance" formation that the angled design of his foot sculpt seems to have been meant to accommodate. Likewise, when forming the torso of Ultra Prime, the interactions of the knee-lock mechanism and the hip detents almost always force Ultra Prime's legs into either an awkwardly knock-kneed arrangement or an equally awkward, and often unstable, bow-legged posture (as seen in the image to the right) that prevents Ultra Prime from standing flat-footed. Unlike Motormaster, this version of Optimus was the only one to not receive the improved hip ratchets implemented in its future releases in some shape or form by Hasbro, though they would be used for the Battle Core redeco later in the line. However, there are third party ratchet replacements for the hips.
Optimus Prime started life as Optronix (Orion to his friends), Hardwired a data archivist at the Vaults. After taking note of a battle in which the Autobot leader Sentinel Prime had been defeated by Megatron, he was summoned to the Council of Ancients and informed that the Matrix had chosen him to be the next leader of the Autobots. He received the Matrix of Leadership shortly thereafter, gaining a powerful new body in the process. After dispatching a Decepticon assassination squad sent to, well, assassinate him, he ordered the Autobots to prepare to evacuate Cybertron, intending to leave the Decepticons to their own devices. The War Within #1
In an amusing (but glaring) example of poor quality control in a Takara product, the back of the packaging features a small amount of Engrish, notably the word "kinetic" being written as "Kinetick". The bio also mentions the elemental metal as the "Cyber-Matter" living metal, which is used for the Aligned continuity family. Oddly, TakaraTomy's stock photo of the robot mode figure was later used as a cutout "battle figure" included with Telebi Magazine's Burning Megatron.
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth, picking up one year after the events that saw Optimus Prime's return to life.
The instruction manual for the MP-04S Convoy Sleep Version reveals a hidden message saying that Rodimus will be the next installment in the Masterpiece series. Concept sketches of the figure were released online in July 2010. The figure is a faithful modern recreation of the original G1 toy. Gimmicks include retractable binoculars, spinning saw blade and the Matrix of Leadership, but the figure's main feature is the ability to transform into both Hot Rod and Rodimus Prime. The transition between the two incarnations involves rotating the face, extending the legs and adjusting the spoiler on the back.
Optimus Prime is among the three Autobot figures available to play in the Monopoly Transformers Collectors Edition game. As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of Transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures. As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".
Sold at the rather exorbitant price of $75, this re-release of the original Generation 1 Optimus Prime toy is actually one of the most visually different from the other "straight" reissues of the mold, despite Hasbro's assurance that this is the toy you had as a kid. Positively anemic in comparison with the original toy, this Prime's red parts are visibly paler than usual, while his blue parts are much lighter (although the version released at Canadian retail reportedly sports a deeper shade of red again). This shade of blue extends to both Roller (a lighter blue than his traditional dark shade, yet darker than the lightest the figure has been in its history) and the internal workings of his Combat Deck, which is itself a much flatter shade of light grey, compared to its normal dark, swirled metallic silver color. In addition, the toy features the now-customary shortened smokestacks, and the elongated missiles seen on the Commemorative Series release. While all reissues of the Prime mold since 2003 have used the original thick-barreled mold for his ion blaster, this version includes the slender sculpt instead.
Best IDW Transformers Comics Stories - The IDW timeline/universe/story that started in 2005 has ended and I personally believe it includes the best Transformers fiction involving our favourite G1 characters. Of course comics can be daunting to get into and I won't pretend every single story was a gem. But there was some stellar storytelling here, the best these characters ever got and I will go through the 5 best stories from this 13 year run that any Transformers fan should check out asap. The titles link to the comics on comixology in case you want to check them out.
An absolutely incredible 28 seasons in, The Simpsons writers and producers have had to be unbelievably creative in coming up with a new couch gag for more than 600 episodes. They’ve had a doppleganger Simpsons family walk in on the family, the whole town has absurdly squeezed into their living room, and we’ve toured the inner workings of Homer’s body.
Optimus Prime was the central figure of Kabaya's final Cybertron candy toy series, Change Galaxy, which was themed around his combinations with Leobreaker and Wing Saber. In addition to being transformable (again, through partial disassembly), this figure of Prime combines with the Change Galaxy versions of his partners, forming Savage Claw Mode and Sonic Wing Mode. Prime himself came packaged with an alternate Super Mode head and his leg armour in order to complete his appearance in each of these forms. Additional Super Mode pieces were not created for this line, as that wasn't the point.
The Transformers toyline was created from toy molds mostly produced by Japanese company Takara in the toylines Car-Robots (Diaclone) and Micro Change (Microman). Other toy molds from other companies such as Bandai were used as well. In 1984, Hasbro bought the distribution rights to the molds and rebranded them as the Transformers for distribution in North America. They approached Marvel Comics to create a backstory with names and short descriptions for each character, most of which were written by Bob Budiansky.
The Decepticons' initial strike came abruptly and brutally, devastating entire districts of Metropolis. Optimus was meeting with Hot Rodimus as this took place, and was nearly overcome with grief when Ratchet informed him of the carnage the Decepticons had wrought. Steeling himself, Optimus coordinated the city's defenses, ordering his troops to be dispatched where they were most needed to repel the invasion. Upon spotting an old enemy on one of the nearby monitors, Optimus geared up to go in the field himself. Arming himself with his favorite pistol, Optimus resolved to take down Megatron. Raid
Optimus and Bumblebee snuck into the Decepticons' base, and found their enemies upgrading themselves with Autobot parts. The pair took offense to this, and Bumblebee set about sabotaging the process. Megatron wound up tripping on some gumballs thanks to the Autobot's mucking about, and Optimus congratulated his fellow Autobot on a prank well done! Intro!
Optimus & Shreddicus were initially exclusive to San Diego Comic-Con 2017, where they sold out. A small portion of the run had been held for future sales: Hasbro Toy Shop put the set up for sale for about five minutes on August 14 before selling out. The remainder was available at HasCon 2017's exclusives booth, but again they burned through the stock very quickly.
The seldom seen 5th season re-airing of the show featured the G1 episodes retold by a stop-motion Powermaster Optimus Prime to the live-action youngster Tommy Kennedy. Although no back story was ever provided for how Prime became a Powermaster, the new sequences are said to take place after the four previous seasons. This indicates that Prime became a Powermaster in the original Sunbow continuity.
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
For the Generation 2 toy line, the original Optimus Prime toy was altered somewhat and an electronic sound maker was added. Later Generation 2 toys of Optimus were completely new designs, such as Combat Hero Optimus Prime, Laser Optimus Prime, and Gobot Optimus Prime, who could become a red Lamborghini car. In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film. In 2006, Hasbro introduced Alternators Optimus Prime, which turned into a licensed 1:24 scale model Dodge Ram SRT-10. In 2011, Takara Tomy released MP-10 Convoy, a smaller, more show-accurate version of the Masterpiece Optimus Prime figure.
The "Unicron Trilogy" version of Optimus Prime is a fictional character of this branch of Transformers lore. Appearing in Transformers: Armada, Transformers: Energon and Transformers: Cybertron (known as the aforementioned trilogy), Optimus is the leader of the heroic Autobots. He often converted to his super combat mode. In all three series, Optimus' English voice actor is Garry Chalk, who previously voiced Optimus Primal in Beast Wars and Beast Machines.
Optimus Prime is armed with two large rifles formed out of a combination of both smokestacks and fuel tanks. These rifles peg into lower arms with grips for his open hands. The under-slung fuel tanks can fire spring-loaded projectiles. In vehicle mode, both smokestack rifles can be deployed as twin cannons, and this mechanism can also be used to store the rifles and deploy them as shoulder guns in robot mode.
Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
The Hasbro stock photos of the toy is slightly mistransformed: his pectoral armor is not folded correctly in robot mode. At least a very small number of units feature a faceplate-less head sculpt which was probably intended for a later retool, but so far there is no news about this pretool being released in the future. This figure was also released in Toys R Us Japan in May 1st, 2017 as a store exclusive, likewise identical to the Hasbro release.
In a break from tradition, Energon Optimus Prime's large mode resembled a configuration similar to Voltron or to the Super Sentai action figures. This design was unpopular with many fans due to design issues with the toy. The small robot's body was large in proportion to his arms and legs which made the figure appear fat, earning it the nickname "Fatimus Prime" or "Obese-imus Prime". The 4 vehicles that combined with the robot were small, lacking the intricate detail that made other toys in the line popular. Fans were also angered by early releases of this toy in which the head was molded with a mouth rather than the traditional face plate design. Later releases of the toy eliminated the visible mouth feature.
This version of Optimus is a redeco of the original Legion Class Optimus Prime toy, featuring additional paint details. He features an Autobot insignia on his faux chest. His head was not entirely clipped down in his stock photos. The stock photos shows him having darker plastics & silver paint as opposed to the final product. This seems to have been a trick of the lighting, as the released toy remained its standard plastic colors & silver paint apps.
After having spent an extended period of time lost on Quintessa, Optimus was returned to Cybertron by the Turbomasters during their efforts to retrieve the similarly lost Flash, who he had been drawn into Perceptor's Dimensional Interface Assembly. The Age of Wrath Pt.5 Though badly damaged, Optimus led an insurrection against the then Megatron-controlled Cybertron, and successfully overthrew his enemy from power, all the while thwarting a Quintesson invasion. The Age of Wrath Pt.6
In his first appearance in the series, Optimus looks similar to the original G1 Optimus Prime until he copies himself with a semi-truck and his design in robot mode changes to the image shown here. Soon after, he retrieves his Mini-Con partner, Sparkplug. The cab of his truck mode detaches to form Optimus himself, while the trailer transforms into a battle station mode operable by Optimus and several Mini-Cons. Optimus can also combine with his base to form a "Super Mode" robot that, when combined with Sparkplug, can fire a series of powerful lasers. Additionally, Optimus can combine with Jetfire and/or Overload in his Super Mode for additional power.
Animated Optimus Prime, in an Earth-based fire truck mode, appears as a hidden character in the Transformers Netjet video game by Hasbro. Instead of being leader of the Autobots, Prime was actually a washout from the Elite Guard. Despite no longer being a member, he maintains his military ranking of "Prime". The scale chart released for the series indicates Optimus Prime stands about 22 feet tall.
"But," we wondered, "How do you listen to music if you're constantly throwing this little robot?" The answer is wireless Bluetooth headphones. Here's a thought: When the music-listening technology that comes with today's yo-yos is cooler and more advanced than the music-listening technology that came with portable CD players in our day, the youth of today officially rescinds its right to ever complain about anything. Ever.
INFOBAR Optimus Prime (ANNIN) is a redeco of INFOBAR Optimus Prime (NISHIKIGOI), transforming into a recreation of the ANNIN edition of the INFOBAR cellphone. All-white in cellphone mode, he sports additional blue and red detailing in robot mode. Like the other figures in this line, he is not a working cellphone but can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
The "Unicron Trilogy" version of Optimus Prime is a fictional character of this branch of Transformers lore. Appearing in Transformers: Armada, Transformers: Energon and Transformers: Cybertron (known as the aforementioned trilogy), Optimus is the leader of the heroic Autobots. He often converted to his super combat mode. In all three series, Optimus' English voice actor is Gary Chalk, who previously voiced Optimus Primal in Beast Wars and Beast Machines.
This mold was redecoed in 2000 as Car Robots Black Convoy, and slightly retooled as his US incarnation "Scourge". After Scourge, the next use of this mold was planned to be Toxitron, which ended up being canceled. The slightly retooled version of this mold was released in 2006 in Japan as reissue Battle Convoy, which was the name of this toy during the Japanese Generation 2. The reissue used the Robots in Disguise modified tooling, with a slightly modified deco using silver vacuum-metalized plastic on his chest and trailer sides along with additional paint applications and G2 symbols. The mold was also redecoed to create a new Generation 2 version of Ultra Magnus as an E-Hobby exclusive (unusual in that the character was killed in the course of Japan's Generation One fiction).
Released alongside a Sega Mega Drive version of Megatron and outside of any other toyline, "Optimus Prime featuring Original PlayStation" transforms from robot to a scaled-down non-functional Sony PlayStation video game console. He features an opening disc compartment and comes with two accessories, a memory card and a controller that splits in two and attaches to his lower arms to act as blasters.
The morning after a particularly vicious battle, Optimus listened to birdsong and pondered life as a giant robot, before asking Ratchet and Huffer for a damage report. The Autobots were puzzled when the Decepticon Seekers (and Laserbeak and Buzzsaw) did a flyby on their camp, as the Decepticons were similarly damaged after the battle, but Shooting Star reported that the Decepticons were trying to distract them while an attempt was made to secure a broken-down oil truck a few miles away. Optimus took a small group to investigate, and successfully aided the humans in getting their truck moving. Swoop was instrumental in stopping the Decepticon attack, and Optimus commended the Dinobot for his valor. Decepticon Hijack
He’s continued to be lovable through many different continuities, all the way to the current live-action film series. But as much as you love him, there may be a few things you don’t know about him. So let’s take a look at some of his strange real-world facts, storyline goofiness, pop-culture tie-ins and even his relationship to Back to the Future.
Optimus Prime transforms into a red and blue semi truck of likely fictitious origin. In keeping with the simplified transformation scheme of the Rescue Bots line, Optimus Prime transforms from truck to robot when his legs are folded down, at which point his head, arms, and hands emerge; folding his toes into position will finish the transformation.
The Hasbro website explains it best: "The rogue DARK NINJA MASTER was exiled to a cave beneath Arashikage Mountain for betraying the ninja clans. After finding the Moon's Blood, a mystical stone of great power, he was able to channel the energy of dead ninjas, making him almost unstoppable. Seeking revenge, he has emerged from his subterranean prison to destroy all ninjas. Only two people can stop him: STORM SHADOW and SNAKE EYES. The two adversaries must join forces, for only by working together will they be strong enough to defeat this evil super-ninja."
Released exclusively in Asia, Shadow Spark Optimus Prime is a redeco of the Age of Extinction Leader Class Optimus Prime, featuring dark grey plastics, weathered deco patterns, and some opaque plastic which was recasted from transparent plastics. He features a scratched Autobot insignia on the right side of his sleeper-cab, and a Cyberglyphic on the left side of the front hood. Some weathered parts does not match well with some other parts (the fenders, for example).
The first in TakaraTomy's Hybrid Style series, Galaxy Convoy is a partly die-cast figure with scaled-down equivalents of the accessories that came with the Leader-class figure. This highly-intricate figure retains all the transformation abilities of the original figure—vehicle, flight mode, robot, and Super Mode—and even its Cyber Key-activated features (even coming with two keys so they can be deployed simultaneously), with additional touches like spring-loaded mechanisms that snap his cannons into place, and hand-grips on the weapons for Super Mode. While he does lack electronics or firing missiles, Prime still includes his Matrix, super-tiny yet still removable, and has four alternate sets of hands: two clenched fists, two with pointing index fingers, two with splayed palms, and two curved hands for holding his various weapon handles. Given the figure's small size, a reconfigurable head was infeasible, so it also comes with an alternate Super Mode head with a mouthplate and crests deployed, though the standard head must be attached in order for the figure to be transformed to vehicle mode.
This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.
The success of Beast Wars and the change in storyline resulted in its second phase: Beast Machines. Like Beast Wars, the name Transformers was used only as a secondary title. While still a success, the storyline and direction borne by Beast Machines was questioned and criticized by the most ardent fans who knew the previous history of the Transformers. Also, there was a clamor for a return to the original idea of the Transformers, that of their being protean robots with nearly humanlike artificial intelligences who transformed into vehicles or devices.
Hot Rod is featured again in Maximum Dinobots. Returning to Earth to continue his search, Hot Rod arrived at the gates of the Machination's complex, and Scorponok prepared himself to deal with the intruder. Unfortunately, Hot Rod found himself fighting well out of his weight class as he was man handled by Scorponok, who cheerfully bashed his face in, put out one of his optics and snapped his leg. The Headmasters dragged him into Scorponok's control room where, with absolutely no prompting, the big man explained his entire plan for the Dynobots, Skywatch and the Machination. Hot Rod seemed less than impressed with this rather mundane approach, which ticked Scorponok off enough for him to point out that it was obviously just the first stage in his master plan. He was also warned to remain awed or he'd be of no further interest. When the Dynobots and newly arrived Monsterbots seemed to turn Scorponok's plan on its head, Hot Rod burst out laughing, at which point, Scorponok ordered him taken out and shot. In the lift to the surface, Hot Rod suddenly erupted in flames, killing his captors, but draining his power supply. Weakened and with a crippled leg, he collapsed on the floor.
Generations "Combat Hero Optimus Prime" is a metallic-blue, gunmetal, and red redeco of United Laser Optimus Prime, having the retooled tab, and being based on the canceled Generation 2 Combat Hero Optimus Prime figure, sporting a red mouthplate inspired by the official catalog image for the unreleased toy (packaged samples had featured a traditionally colored gray mouthplate). He comes packed with a (vaguely) Generation 2-styled Deluxe Class Autobot Jazz, as well as unchanged releases of Generations Legends Class Thundercracker and Motorbreath.
In order to come to some sort of conclusion about the price of LEGO, I needed to get some data on the historic retail prices of LEGO sets. The best source of this information is brickset.com. This website has data on almost all LEGO sets ever made and the retail pricing for many of them. I wrote a web scraping program to go through the Brickset database and make a database of set information. In order to keep the results relevant, I decided to compile one set that fit two basic qualifications:
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.
Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
Although Rodimus plays the part of the brash youth, he is actually very intelligent, and has no loyalty to Optimus Prime; only his own personal gain. According to his biography, Rodimus used to be leader of the Wreckers, a mercenary group hired by Optimus Prime; but after the deaths of the other members, he joined the Autobot Seekers under the command of Goldbug.
The actual events of the Autobots and Decepticon coming to Earth were never printed by Dreamwave comics, but flashbacks of the events are printed later. These flashbacks suggest that the Autobots allied with humankind and defeated the Decepticons at the turn of the century. They planned to return to Cybertron aboard the newly constructed Ark II, but the ship was destroyed as part of a military conspiracy to take control of the transformers. A terrorist organization, run by the enigmatic Lazarus, was able to seize control of several of the Transformers that fell back to Earth while the U.S. military was occupied with locating Prime's body. Before his departure, Prime had entrusted a small portion of the Matrix to Spike Witwicky, who was forced by the product chief, General Hallo, to use it to reactivate Prime. Functional again, Prime used the Matrix to reactivate more of his fallen comrades, and then faced off against Megatron in San Francisco.
Like some other Legends/Legion Class toys, several of the loose units were dumped in some Hobby Shop dealers in Asia, although this one is very likely to be an identical knockoff of the toy. While the paint applications are pretty much identical to the real deal, the pegs on the legs/trunk front can be a little too tight when attached. in some worst cases; it can break off if attempted to pull off by force.
In the first nexus, when Swoop reported back to Autobot HQ that the other Dinobots were being controlled by Bombshell's cerebro-shells, Optimus had to decide whether to stop them with an immediate full-scale assault, or consult the Ark's computer. If he led an immediate attack, the cerebro-shells were jolted loose when his troops carried out his order to, "Bring them down fast and hard". If he consulted the computer, he then had to choose between its plan to have Windcharger remove the shells from a distance with his magnetic powers, or go with Mirage's idea to lure the Dinobots over Bandit's Bluff with an Optimus Prime hologram. If he chose Mirage's plan, the Dinobots charged over the cliff and into the ocean, where they were salvaged for repairs back at base. If he let Windcharger lead operations at the bluff so he could confer with Skids about some strange activity near Dolphin's Bay, it was out of his hands whether Windcharger accidentally tore the Dinobots to bits, or harmlessly removed the cerebro-shells. The latter outcome led to Grimlock telling Optimus that Bombshell said controlling them was just part of a larger plan, and the Autobot leader realized that it might tie in to Skids's report. Skids and Bumblebee could investigate in Wheeljack's new mini-sub, but should he send Sludge along with them?
In the United Kingdom, this Optimus Prime was released as an Argos exclusive along with several other sets branded as part of the Reveal the Shield subline imprint. His United States release was initially claimed to be exclusive to Target by online retailers from Asia, but even though the other Reveal the Shield products eventually became available at Target, Voyager Class Optimus Prime was released as a Toys"R"Us exclusive in the United States instead, complete with a "Toys"R"Us exclusive" sticker. Also, both his United States and Asian releases lack the "Reveal the Shield" logo the United Kingdom release has (but still feature the "Reveal hidden images" call-out).
Optimus Primal, leader of the Maximal faction in the Beast Wars animated series and toy line, is not Optimus Prime. Primal is one of the Maximal descendants of the Autobots, who took the name to honor Optimus Prime. The same applies to the Megatron of this era. Before the animated series began, Hasbro envisioned Prime and Megatron as their beast counterparts, but once the animated series began, this had already been changed. Design elements, such as Prime's mouth-plate slitted to add an actual mouth for the animated series and the first mini-comic that came packaged with the toys, suggest this. Nonetheless, Optimus Prime and Megatron were a major reason the Beast Wars began, as Megatron's Predacon namesake traveled back in time seeking to alter history and insure that the Decepticons triumphed over the Autobots.
Another release of the Reveal the Shield Legends Class sculpt. The deco for its initial release is unchanged from the Transformers release from 2012, whereas the tooling is identical to the 2012 release's running change variant, with the retooled hands and a hole on the back of his head/top compatible with Cyberverse 3mm pegs. Bizarrely, the package art is lifted directly from the Generations Legends Class Optimus Prime/Autobot Roller two-pack's packaging, whereas the stock photos depicted on the back of the packaging are taken from Reveal the Shield Optimus Prime's packaging and only slightly altered, advertising a "Reveal the Shield" rubsign gimmick the toy doesn't actually have. Meanwhile, Hasbro's official stock photos provided to online retailers (including an in-packaging photo) depict the toy with the sword that came with the running change variant of the sculpt's 2012 release, even though the actual toy doesn't include the sword.
One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
As the Binaltech saga unfolds, the multiverse is threatened with destruction, until the original continuity is restored and the Binaltech universe is split into and preserved within its own separate universe. Overdrive confirms that the threat is over by visiting the dimension occupied by the original timeline, and reveals that in that world, Hot Rod had received the Matrix and taken over leadership of the Autobots as Rodimus Prime.
The largest Action Master set, this incarnation of Optimus Prime is a non-transforming action figure which comes with the "Armored Convoy", a large, heavily armed tractor trailer. The cab of the truck transforms into a small jet that can seat one Action Master figure, while the trailer itself converts into a larger battle station with turrets that several Action Masters can man. The sculpt of the Prime figure itself is closely based on his character model, albeit with a coloration that seems to have been based at least partially on the small robot form of his Powermaster body.