Part of the fifth wave of Kabaya's revival of the Transformers Gum series, this snap-on transforming model kit of War for Cybertron Optimus Prime is sculpted from red, light blue, and gray plastics, and uses stickers for detail. He comes with a blue non-transforming version of his hand-held blaster rifle, which mounts at the rear in vehicle mode. He comes packed with a model kit of Tigerbreast, and a stick of gum.
A BotCon 2012 exclusive purple redeco of the Deluxe "Generation 2" Optimus Prime figure from the Generations toy line, with the sword's blade molded in clear yellow. Much like the 2008 Voyager figure, this figure has painted-in "battle damage" effects. The right side of the hood has the words, "I shall stand...", while the left side says, "The rest shall fall."
Hot Rodimus also appeared in the Japanese exclusive Kiss Players storyline. In the alternate timeline of Kiss Players, Hot Rodimus has given up the Matrix to Ultra Magnus after his actions in hurling Galvatron out of Unicron's body resulted in the Decepticon leader crashing into and devastating Tokyo, rather than landing on Thrull, as seen in the original continuity. He subsequently came to Earth to try to repair relations with the humans, but was instead attacked and nearly killed by a Legion Creature, a hybrid created from Galvatron's Unicron-corrupted cells fusing with local creatures. He was saved by a kiss from the human Li Shao-Shao and reformatted into a body resembling a Ford GT. He went on to battle the Earth Defense Command (an anti-Transformer organization), the Legion - and Optimus Prime himself. Prime had been resurrected in a Kiss Player body, but Hot Rodimus, believing his commander to be dead, thought it was a trick.
When Bumblebee, Hound and Spike brought a badly-damaged Starscream back to the Ark, Optimus struggled with the ethical implications of allowing Wheeljack and Ratchet to mess with the Decepticon's logic circuits, but gave them the go ahead. Starscream proved to be amnesic, and Optimus was able to take the opportunity to help him as much as possible, even physically preventing Megatron from retrieving his former lieutenant when Starscream opted to stay with the Autobots. Though Starscream left as soon as he regained his memory, Prime reflected that they'd learned that maybe it was possible to reason with a Decepticon. Redemption Center
Part of the sixth wave of Custom Kreons, and the first (and only) Robots in Disguise-themed wave, Optimus Prime uses the new 2015 Kreon construction with the hollow waist-peg and "raised" hands.. He comes with a buildable parts rack on which to hang/store his extra pieces. Unlike the previous Custom Kreons, he no longer features a chromed helmet, and comes with an extra clear-plastic helmet, torso, legs, and his arms, plus a chromed Bazooka (originally from the Kre-O Battleship sets), and some kind of a dual pick-axe with a clear red staff.
Hasbro executives, high off the revival of G.I. Joe through the same marketing concept, decided to acquire rights to toys from a variety of Japanese “Super Robot” series. Transformers didn't introduce the concept of super robots to the United States, but for the first time, the genre became widely recognized and popular outside of Japan. As the Transformers brand grew throughout G1, it began to define the genre, and all other super robots were measured competitively to Transformers' standard.
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth. With the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.
The Animated Tech Spec written by Derrick J. Wyatt in Hasbro Transformers Collectors' Club #24 states that Rodimus as having the rank of Prime and clearly being the leader of a team like Optimus and Sentinel. His toy is listed as "Rodimus Minor" which Hasbro explained at San Diego Comic-Con 2009, was because "there were already too many Primes in the toy line". Within the series, he is only ever called or credited as "Rodimus".

Though Optimus allowed himself to be destroyed when he betrayed his own moral code while playing a video game, a copy of his mind survived on a floppy disk. Years later, he was restored as a Powermaster, binary bonded to the Nebulan, Hi-Q. Optimus Prime slowly earned the respect of Decepticon leader Scorponok, mourned the loss of his friend Ratchet, and ultimately sacrificed everything to defeat Unicron. Though Optimus died again, his mind persisted in Hi-Q, and the Last Autobot was able to restore him as an Action Master in time to bring a temporary end to the war.
Part of the first wave of Siege Voyager Class figures, Optimus Prime transforms from robot to short-smokestacked Cybertronian armored truck and back. He includes two weapons compatible with the C.O.M.B.A.T. System—the "W-50 Dual-Mech Energon Strikeshield", which is an axe that transforms into a shield, and the "W-M3 RF Ion Blaster". Both weapons can combine to form the "Sentrystrike Ultra-Blaster". Optimus Prime also features "battle damage" paint applications on several parts of his body, as well as multiple hardpoints all over himself and his weapons to accommodate "Fire Blasts" from the Battle Masters assortment, which can be used to simulate blaster fire or explosions.
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.
For its release in Korea, Hasbro Asia provided a collector coin featuring truck-mode Optimus Prime on one side and "MP-01L" on the other. The coin came mounted on a card featuring lineart of the Autobot leader's head, the stark black design of which could be mistaken for promoting the earlier "Sleep Mode" release. The limited release (and general lack of enthusiasm for the collector coins in Korea) makes this one of the more difficult Masterpiece coins to find.
MATTY COLLECTOR SPECIAL SALE If you missed out on the original Matty Collector figures, you’re in luck; many items are back in limited quantities! https://www.bigbadtoystore.com/Search?T ... geSize=100 ------------- NEW PREORDERS ------------- TRANSFORMERS STUDIO SERIES Reach past the big screen and build the ultimate Transformers collection with Studio Series figures, inspired by iconic movie scenes and designed with specs and details to reflect the Transformers movie - Read More
In order to come to some sort of conclusion about the price of LEGO, I needed to get some data on the historic retail prices of LEGO sets. The best source of this information is brickset.com. This website has data on almost all LEGO sets ever made and the retail pricing for many of them. I wrote a web scraping program to go through the Brickset database and make a database of set information. In order to keep the results relevant, I decided to compile one set that fit two basic qualifications:

The real selling point of the toy, however, is the colossal Omega Combat Armor. Optimus' trailer transforms into nearly two feet of limb extensions, armor, and wings. The armor remains completely integrated (except for the Ultimax Super Cannon) during transformation, with no partsforming, although this renders the final power-up robot mode somewhat limited in articulation, having no leg articulation whatsoever aside from swinging the hips out slightly and twisting at the ankles for maximum stability. The armor adds six more 5mm ports of dubious utility around the feet, retains the four from the cab robot and the eight from the trailer (on the backs of the wings), and has his own pair of 5mm fist holes. In trailer mode, it can support itself using folding blue landing gear, although the attached ball-jointed struts make it somewhat less than realistic.
Part of the fifth wave of 2012-onwards Generations Deluxe Class toys, Thrilling 30 Orion Pax is a new mold with a robot mode inspired by Guido Guidi's design for the character, originally seen in Spotlight: Blurr. Some liberties have been taken with the original concept to facilitate his truck mode, which is a new design not based on the Guidi art. He comes with his Ion Blaster and an Energon Axe with a transparent red-orange blade, both of which can peg onto 5mm ports on his hands and vehicle rear sides. Although not depicted on the instructions, the Ion Blaster can also peg into the hole in the larger blade of the Energon Axe.
Optimus Prime can also combine with Leader-class Jetfire to form Jetpower Optimus Prime by slightly transforming his backpack and feet. Sadly, this takes away from his leg articulation, because otherwise he could never support the massive backpack he has in this mode. However, fans have created alternate configurations that increase leg articulation and movie-accuracy.
In the alternate universe of the 2003–2004 toyline and series, Transformers: Energon, Rodimus (lacking the "Prime" suffix in English, but still called Rodimus Convoy in Japan) was a great leader on Cybertron ages in the past and was viewed as a hero by many, including similar character Hot Shot. Desiring to escape the war that had consumed the planet, Rodimus departed Cybertron with a contingent of like-minded troops, most of whom settled on an alien planetoid and became the energon-mining Omnicons. Still, Rodimus continued on his journey with Prowl and Landmine, carrying the "flag of peace" from world to world.

In "Endgame" 2-parter, Ratchet builds Optimus a jetpack attachment to help in the coming battle against the Decepticons. After some initial difficulty, Optimus is able to get the hang of the device, only to be shot down by Starscream's female clone, Slipstream. Though Ratchet urges Optimus to use the Magnus Hammer, he is reluctant to do so, given his past with Ultra Magnus. In the end, he wields the weapon as the Lugnut-controlled Omega Supreme clones land on Earth. During the fight, Optimus manages to master the Magus Hammer's power in order t overwhelms Megatron to the point of being acknowledged by name. After a devastating battle, the last remaining Omega clones self-destruct due to Starscream's intervention. With Prowl's sacrifice, the Allspark is rebuilt into one as it forms a barrier around the Omega clone, along with Optimus and Megatron. Prowl's spirit pulls Optimus from the bubble just as the clone self-destructs with Megatron still trapped inside. Prime laments Prowl's passing before defeating a heavily damaged Megatron and sparing him the deathblow, saying that Megatron does not deserve the "easy way out". He and his team return to Cybertron with Omega Supreme, the captured Decepticons, and Prowl's body and are greeted as the hero he had wished to be so long ago. The reconstructed Allspark, having a structure similar to the G1 incarnation of the Autobot Matrix of Leadership, is hung around his neck.
For all the positive aspects, these changes are not without their drawbacks. The LEGO community has been crying foul over the perceived decline in quality of the bricks5. While nowhere as bad as their competitor, any decline in quality reflects poorly on a company known for quality control. The LEGO group has been expanding its manufacturing base to places outside of Denmark, into Mexico, the Czech Republic, and China (although so far it seems only their “signature brand” non-set items are made in China). LEGO claims that this has not changed their dedication to the quality of standards by which they abide. However, it seems that the molds have changed to reduce plastic6.  Whether or not this affects the durability of the bricks is yet to be seen.

Not depicted in the instructions or stock photos, Roller can attach to Prime in vehicle mode via two tabs on the vehicle front which slot into two corresponding slots on Prime's feet. Another undocumented feature is that the butt of the Ion Blaster can be inserted between the barrels of Roller's weapon mode to form a longer weapon. Also not shown in the instructions but depicted on the stock photo on the card-back is that Prime's shoulderpads can be rotated up; the intended positioning for this is notched, although you can position them at other angles.
Like some other Legends/Legion Class toys, several of the loose units were dumped in some Hobby Shop dealers in Asia, although this one is very likely to be an identical knockoff of the toy. While the paint applications are pretty much identical to the real deal, the pegs on the legs/trunk front can be a little too tight when attached. in some worst cases; it can break off if attempted to pull off by force.
Although the animated series ended in the U.S. after The Rebirth, Optimus Prime continued to appear in animated sequences of Transformers toy commercials, progressing from Powermaster to Action Master. He even made an appearance as a computer-generated Combat Hero. Many episodes of the series were re-aired to promote Transformers: Generation 2. During these sequences, computer-generated scenes featuring key G1 characters are borrowed from Generation 2 commercials to serve as opening, closing, and commercial bumpers. Optimus Prime is shown in the opening and closing fighting Generation 2's Ramjet.

There may be two things you didn’t know in this one: 1) Bumblebee is in the Transformers Hall of Fame; and 2) There’s a Transformers Hall of Fame. The shrine to all things Transformers was the brainchild of Hasbro, the American toy company that worked with Japanese toy company Tomy to create the Transformers in 1984. Starting in 2010, they wanted to honor not just popular characters, but also the real people behind the toys, TV shows, comics, and films.

If the Autobots went along with Prowl’s strategy, the resulting heat from the explosion caused the Autobots’ circuits to overheat, rendering them unconscious. Upon reawakening, the Autobots found themselves captives of Megatron, who informed them that their fellow Autobots would soon perish, and that the humans would be conquered by the Decepticons shortly after.


In a later scene, Hot Rod fled the city with Kup and the Dinobots when Galvatron, a recreated Megatron, attacked the city again, this time only smaller, after being reformatted by Unicron and taking revenge on Starscream. After meeting up with the other Autobots after a series of adventures on the planets Quintessa and Junk, Hot Rod returned to the other Autobots and rushed to Cybertron to save it from being eaten by Unicron. Facing Galvatron inside Unicron's body, Hot Rod was able to get his hands on the Autobot Matrix of Leadership in the confrontation, as the voice of Optimus Prime was heard saying, "Arise, Rodimus Prime". The power of the Matrix reformatted Hot Rod into Rodimus Prime, maturing him, giving him a larger body, deeper voice, and different vehicle mode. It also destroyed Unicron's body, bringing the events of the film to a close with Rodimus Prime as the new Autobot leader.
Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[8] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[9]
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.
Asia Premium Series Optimus Prime Ultimate Edition is an extensive screen-accurate redeco of Jetwing Optimus Prime (with a maskless head from Buster Optimus Prime), this figure features loads of accessories from the Striker & Jetwing figures, and includes brand-new knuckle and battle hooks based on the HFTD Optimus', which can be installed in either hand. The figure lacks the chrome of previous releases, instead opting for silver paint. The pin-striping is also absent, but he does have painted pupils. The figure also features 2-2-1 articulated fingers, which the first Leader Class did not have due to budget cuts. The ion cannon included lacks the black paint application, leaving it completely silver. When purchased from select retailers, this toy will also include a shiny metal number plate and a bonus mini AllSpark cube accessory. His instructions depict a weaponised mode which has some clearance issues, as his Gatling guns are shown attached to the jetwing, which pushes against his arms. His Eliminator Gun and Assault Blaster cannot tab into the Gatling gun tightly either.
Optimus Prime is among the three Autobot figures available to play in the Monopoly Transformers Collectors Edition game.[28] As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of Transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures. As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".
When the long-lost Titan Masters reemerged into modern society and joined the Autobot-Decepticon war, Optimus Prime was partnered with the Titan Master Apex, who carried a portion of Prime's spark, boosting the legendary commander's already formidable abilities. Titans Return Apex/Powermaster Optimus Prime toy bio On Velocitron, Optimus Prime was present for the biggest race of the year when Scourge and Crashbash arrived and attempted to botnap Hyperfire. Optimus ordered Sentinel Prime and Hardhead to battle against them. Later, Optimus was part of a battle on Cybertron against Soundwave. During the battle, the Autobots' base Fortress Maximus transformed to thwart the Decepticon advance. Optimus Prime declared that to defeat the Decepticons, the Autobots would need to master the power of the Titan Masters. Titans Return: The Power of the Titan Masters
This TakaraTomy Asian market-exclusive Leader Class two-pack consists of a redecoed Jetfire and a slightly altered Buster Optimus Prime. Buster Optimus Prime is almost identical to the single-pack Japanese release of the toy, but unlike the standalone Buster Prime, has a head with a faceplate, itself containing more paint details than the first release of Revenge of the Fallen Leader-class Optimus Prime. The flames are outlined with light blue instead of white for accuracy to the physical truck prop (though it ends up being inaccurate in robot mode). Jetfire has a subtle, more movie-accurate colour scheme.
The Heroes of Cybertron PVC figurine line is an adaptation by Hasbro of Takara's own Super Figure Collection line. The main differences between the two lines is that Hasbro cast Autobot and Decepticon figures in clear blue or clear red PVC respectively, then completely painted the figurines. This allowed the eyes to 'glow' when placed in front of the light source.
Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster stored in the form of the fuel tanks on his back, and a shell cannon stored on his back, two retractable energon blades that extend from both forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, two retractable energon hooks on both of his forearms, and bladed knuckles. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.
When a two-part race was being held with a massive supply of oil and gasoline as the prize, both the Decepticons and the Autobots badly wanted to win it. Megatron entered the race by hiding himself inside a hollowed-out car and harassed Cliffjumper all throughout the contest. When Prime discovered the car was being driven by his arch foe, he swiftly pulled a telephone pole out from the ground and used it to bash the mortal hell out of the cheating Decepticon. Thanks to Prime's violent intervention, Cliffjumper was able to win the race. Afterward, Optimus Prime celebrated the Minibot's victory with a gargantuan smile as all the Decepticons starved to death. The Great Car Rally
Part of the first wave of Age of Extinction: Generations Leader Class toys, this is yet another completely new "big" Optimus Prime figure. While smaller than the First Edition toy, this one features more silver and chrome paint in vehicle mode, a more poseable robot mode, and a Vector Shield accessory instead of the Sentinel Shield. Unlike the First Edition figure, Leader Class Optimus Prime's pauldrons and hip-skirts are formed from truck kibble, giving him a marginally smaller backpack. His accessories have roughly the same functionality as the First Edition toy, with his sword being hand-held and pegged onto his hands or storing underneath the truck, and his shield mounting onto his left forearm or storing on the back of the truck. Additionally, the sword sheath underneath the truck can be folded up and used in robot mode.
This miniature model kit of Energon Optimus Prime comes unassembled and unpainted, moulded mainly from white, red and black plastic and featuring some stickers for essential detail. Standing at around 4.5 inches tall, he comes with his Prime Force drones and can combine with them in the usual ways; while Fire-1, Gyro-2 and Digger-3 are moulded in their normal colours, Submarine-4 is stuck being black, and like every other non-color-molded, non-stickered detail on the kit, must be painted by the buyer. Prime's transformation involves removing his feet and head (an alternate Super Mode head is included, as his antenna does not transform into a helmet), and he does not come with a trailer for the Prime Force, but his gun can shoot small orange plastic BBs via a pressure-launching mechanism, and he comes with a small gold-chromed Energon star that fits onto his left shoulder. The kit also comes with "Episode 1" of the "Optimus Prime VS Scourge" mini-comic, printed on the back of the instructions.
Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
The Autobots continued to guard humanity in secret for many years, until one day in the 21st century when Ratchet was captured by a human group known as Skylogic Systems. Upon investigating the organization, Optimus Prime and Bumblebee came into contact with the Lone Gunmen, three humans who were also on Skylogic's tail for their role in creating a dangerous virus. Learning from them that Ratchet's DNA was part of the concoction, the Autobots joined forces with the humans and helped track down David Simmons, the man responsible for releasing the virus. One interrogation later and they had the address to the Skylogic base, though Prime's size prevented him from easily infiltrating the building, so he left the rescue mission up to Bumblebee and the Gunmen. Once Ratchet was saved, the Autobots parted company with their new human friends in an attempt to lure away any Skylogic pursuers. The X-Files: Conspiracy: The Transformers
This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.

Exclusive to Walmart, this Deluxe Class Optimus Prime is an all-new mold, close in scale to Voyager Class Megatron. He has a high range of motion, with ball jointed shoulders and hips, swivels at the neck, knees, and feet, and double swivels in the elbows. As a result of the transformation process, he can also rotate at the waist, though this is hindered considerably by his "backpack" kibble. This can be remedied by pointing the truck nose downward, as it is in the packaging. Optimus Prime also features the spring loaded "Automorph" feature in his head, if the truck kibble pushes the small grey switch from his back before splitting the chest into half.
Optimus Prime's Japanese name is "Convoy", which is named after his original name "Battle Convoy" in the Diaclone toyline, because the name "Optimus Prime" is difficult for Japanese kids to remember and pronounce.[2] All Optimus-inspired characters were called variations of Convoy in Japan up until the 2007 Transformers film, at which point TakaraTomy changed their minds and began using the name Optimus Prime as well. Presumably to avoid confusion, this change includes the Generation 1 version of the character as well, who is now called Optimus Prime in newer products and fiction such as Transformers United and Transformers: All Spark, though his name remains Convoy in material aimed at adult collectors such as Alternity and Masterpiece.
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.
Although MechTech Optimus Prime's deco is similar to the first Deluxe Class figure, some of his parts (robot shoulder flaps, chest piece/truck front) were recast in blue plastic (with the chest being painted red), and his paint applications on the pelvis, headlights & thighs are omitted. His front truck hood/backpack's deco is altered: the truck steps and the fenders were painted blue, and the gold sprays on the flame tampographs are removed, while he features additional flame tampos on both sides of his front hood, and an Autobot Insignia on his left robot shoulder. He still retains the light-piping gimmick, but cast in clear plastic, with the eyeballs being (halfheartedly) painted with clear blue. His MechTech weapon is cast in transparent orange plastic, with the exception of the scope/lever and the gun barrel, which remained opaque silver plastic due to being cast with unpaintable plastic. He also features Cyberglyphics on the left side of his vehicle mode front hood.
His original trailer is not included with the set; instead, he comes with a new deluxe-scaled trailer, not available with any other figure, based on the one towed by Prime in Dark of the Moon. The trailer is compatible with both figures, and sports 5mm post-holes that will hold (among many other things) G1 Prime's laser rifle and the MechTech weapon Movie Prime is armed with.
The BK tie in toy of Optimus Prime is essentially two toys in one. The first part of the toy consists of two truck halves, which snap together around a sculpted robot mode Optimus Prime. The truck is squat, and primarily blue, with outbursts of chalk gray paint and red flames. Pulling back and letting go activates the gimmick: Prime "drives" forward and bursts from the truck mode, "transformed" to robot mode. This gimmick has marginal success.

Unlike previous Convoy toys, the cab section did not separate from the trailer, instead forming the arms of his imposing 12-inch tall robot mode. He lacks any sort of leg articulation in this mode, but his battery powered treads can provide him with locomotion. Star Convoy's chest can open to reveal a control center for Micromaster figures such as his partner figure Hot Rodimus to ride in.
A redeco of the Super Optimus Prime mold with a primarily red cab, much deeper blue, and a Prime Force uniformly colored in black was planned to be released with Smallest Transforming Transformers Generation 1 Optimus Prime as a Target exclusive. The toy got far enough along in development to have package artwork created by Dan Khanna, which was later revealed online, but it was canceled shortly before making it to full production. Its red, white, and black coloration earned it the festive nickname of "Santa Prime" among fans online.

A standard brick with two rows of four studs delivers a profit to LEGO that is orders of magnitude greater than any specialized element, all because the brick is what LEGO calls a “universal” or “evergreen” element that can be used in so many different sets. A one-of-a-kind, specialized piece, however, generally works in just one or a few sets. Moreover, the cost of molding a standard brick is orders of magnitude cheaper than producing a specialized piece.
Optimus Prime is then informed that Megatron has infected the core of Cybertron with dark energon and is given the task to undo the damage done. After rescuing Omega Supreme, Optimus, Ironhide, and Prowl fight their way to the core, but it's too late. The core informs Optimus that it is far too corrupted. It can repair itself by shutting down, but it will take millions of years. By that time, Cybertron will have to become cold, barren, and uninhabitable. The core gives Optimus a small piece of itself, saying it will still survive as long as the piece does. Optimus accepts the burden and the core relinquishes the Autobot Matrix of Leadership.
Starscream was my first transformer. I got it because my parents bribed me to climb to the top of the pole in the gym class. Shit was scary. Do they even make kids do that anymore? Anyway, I protected that with my life. Sorry to hear about yours. I didn't have siblings at the time but within a few years I did have some who pretty much did destroy everything they touched. Luckily by then I was a teenager and figured out good hiding places for important stuff.
The styling is a little blocky, but these are toys aimed at a younger audience that actually wants to play with their Transformers. They don’t need 45 step transformations that result in perfect representations of what they see on screen. They want something that they can switch quickly between modes and that have added play potential, with power-up engines that unlock special features.
A Bic Camera and Joshin Kids' Land exclusive, this redeco is the first release of the Prime: First Edition Deluxe class Optimus Prime figure in Japan, featuring a slightly lighter hue of red (the stock photography provided by TakaraTomy, showed Orion Pax's red plastic features more pink than its original toy, this seems to have been a trick of the lighting or a photoshop), and greyish blue plastic. He features several customer-applied foil stickers, including Decepticon insignias of varying sizes. He comes with a gold vac-metal version of the Arms Micron, R.A., as well as the normal blaster-cannon.

On another beautiful day, Optimus sat under a tree with Bumblebee and Hound, discussing the Decepticons. A while later, Beachcomber reported that Grapple had shot at him. Optimus smelled a Decepticon plot and led an assault on their headquarters, only to find that Grapple had been injected with a cerebro-shell, placing him in Decepticon control. Battle commenced, during which Grapple was freed and helped them defeat the Decepticon. Afterward Optimus said it all had been worth it to get Grapple back. Insecticon Attack!

The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures.
A redeco of Deluxe Earth Mode Optimus Prime with the jet pack attachments and a smaller version of Ultra Magnus' Mass Hammer, as seen in the "Endgame" series finale. The Wingblade attachments are also compatible with Voyager Optimus Prime. The figure never saw a release in the U.S. market due to Hasbro's decision to cancel the toy line, but a variation of it was made available in Japan.[155]
One of the single rarest Lucky Draw Figures in existence, this "Custom Color" redeco of Super Optimus Prime was limited to only one in the world. It was the grand prize of a coloring contest held in Septemeber 2005's TV Magazine, in which entrants colored in lineart of Prime with the deco they wanted to see. The winning entry was in green, blue and gold, while ten runners-up received one of five gold or five silver Lucky Draw versions of Prime.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.

In late 2014, twelve Kreons were sold through TakaraTomy's "TakaraTomy A.R.T.S" Gacha capsule-toy machines in Japan. Thankfully for the rest of the world, these Kreons are all basically identical to previously-released ones in the Hasbro lines. The Gacha release of Optimus Prime is basically the base Custom Kreon Optimus using his clear-plastic helmet and carrying the small ray pistol, lacking his leg-wheels, smokestacks and backpack (and of course all those other parts and accessories).
Optimus and Wheeljack returned to Autobot HQ after an absence to find Grimlock had taken leadership. Though they failed to resist him, he soon bored with leading the Autobots and let Optimus take command again. Me, Grimlock, King Impressed with Bumblebee's success as team leader, Optimus assigned Pipes to lead a team. The B-Team Part Deux With Optimus badly damaged and without the Matrix, the Autobots were driven off Earth and sought refuge on Cybertron. Once Optimus had recovered, he put together a team which returned to Earth and retook it from the Decepticons, with Optimus badly damaging Megatron in combat. All Hail Megatron
Of course, while Bumblebee does a lot of serious action in the films, tumbling and punching and kicking, you don’t see McFly doing a whole lot of that in the Back to the Future films. In fact, McFly doesn’t get up to too much more hard-core physical action, aside from some skateboarding and wailing on the guitar. Nevertheless, Fox does have a distinctly bowlegged gait, and you can see some of that in Bumblebee, and you can maybe see some Fox mannerisms in his more casual interactions with Sam Witwicky.
Meanwhile, the U.K. offices of Marvel Comics were producing their own storylines. Writer Simon Furman offered a different take on Prime, that he was weary of the war he had been forced to fight. In the "Prey" storyline, Prime arranged for Wheeljack to build a copy of himself and destroy it to see how the Autobots could cope without him. Unfortunately, the plan was derailed by Megatron and the Predacons. During the battle, Prime, Megatron, and Ultra Magnus were transported to Earth. There, Prime accidentally interrupted his own funeral service. The theme of war-weariness would again come to the fore in the U.K. strips detailing Prime's U.S. death.
Optimus awakened to the sound of Ratchet's voice. Taking in his surroundings, he noted that he was now in an organic forest, surrounded by unfamiliar Cybertronians. It soon dawned on him that he had been transported to the dimension where Megatron had intended to begin his conquest: the OG World. The 'bots surrounding him were the local counterparts to his own Autobots, including his own doppelgänger! The locals informed him that they had found him thanks to the help of his "companion," a small robotic girl. Before Optimus could puzzle out who this humanoid was, the group came under attack by the local Megatron. Though badly injured, "Cloud Optimus Prime" had the strength to fight alongside "G1 Optimus Prime" against the Decepticons, and protect the girl that had brought the Autobots to him. During the fight, blasts from both Primes' rifles collided with a blast from Megatron's fusion cannon, knocking all of the combatants down. Cloud Optimus Prime ensured that the girl was safe before before his attention was drawn to the horizon by a familiar voice. It was "Cloud Megatron," who had also survived his inter-dimensional trip, and had come to continue his fight against his nemesis. Leap
In a completely different scenario, Optimus agreed to Prowl’s plan to go on the offensive and try and discover the full extent of the Decepticons’ plans. Optimus nominated Prowl, Bumblebee and Mirage to go along with him on the mission. The group refuelled with the gas that Sparkplug brought back from the Autobots’ secret storage area, and took off. The group soon happened upon the Decepticons’ lab in the middle of a barren, polluted wasteland.
The figure would have come in a monochrome version of the standard Henkei! Henkei! Convoy's packaging, still named "Convoy" but now labeled as part of the Gentei! Gentei range of exclusives.[8] Reportedly, this figure was intended as a Wonderfest exclusive, but was canceled because, according too TakaraTomy designer Shogo Hasui, it was too similar to Universe Nemesis Prime. Knockoffs were later made available, so buyers beware!

This straight reissue of the original Optimus Prime figure was released in Hasbro's European markets in the early 1990s, at the same time as many other Generation 1 figures were being re-released as "Classics". Oddly, although he shares their golden packaging, Prime is not actually identified as a "Classics" figure anywhere on his box, but is generally considered to be part of the sub-line for simplicity's sake.

×