In robot mode he resembles previous Optimus characters: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
This is a weird one. Back in the late-’80s, the original TV show had ended and Marvel Comics decided to take the “transform” part of the property a step further and gave a handful of Transformers an organic, human-looking shell. Bumblebee was one of the lucky Autobots to get one. According to the storyline, the Decepticons developed the technology first, but the Autobots secretly caught wind, made their own human shells, and fooled the bad guys into thinking they were fighting mere humans, until they burst out of their shells.
After the film, in season three, Rodimus did not have time to rest on his laurels as commander, immediately finding himself and the Autobots targeted by the Quintessons, who lured him to their planet of Quintessa and detonated it in hopes of destroying the Matrix. Rodimus and the Autobots survived, however, and Rodimus proceeded to voluntarily short-circuit himself to allow his life-force to enter the Matrix, feeling that the answer to the mystery of the Quintessons' identity lay within it. His hunch proved correct – the Quintessons, he discovered, were the Transformers' creators, and Rodimus knew that the future would be a difficult time for the Autobots.
The Diaclone Powered Convoy figure had several additional features and modes which were mostly excised or left unmentioned for the Transformers release of Ultra Magnus. Principally, Powered Convoy came packaged with "Powered Buggy", who was left out of Magnus's release (see notes below for further details). Omitted from Magnus's instructions is the ability of his chestplate and super robot head to combine to form a small vehicle; the Powered Convoy version of the figure included small rolling wheels on the underside of the chestplate which were removed for Ultra Magnus. Additionally, three additional modes were included in the Diaclone instructions that Hasbro left out: a "preparation base" mode and an "Autobot base" mode were excluded entirely, while the third, a "catapult launcher" mode originally intended and proportioned to accommodate the Diaclone Jet Robo figure that became Starscream, was shown only on the front of his packaging, interacting with Silverbolt. The Japanese release of Ultra Magnus—released as part of the Scramble City sub-line—did include instructions for the preparation base and catapult launcher modes, but replaced the original Autobot base mode with a new configuration.
Part of the new Generations Cyber Battalion series, Optimus Prime is a new mold which stands 7 inches tall, and transforms from a truck (which is based on the Generations Thrilling 30 Legends Class Optimus Prime figure) into a robot in just 7 simple steps. The figure's transformation engineering had taken cues from the Reveal the Shield Legends Class Optimus Prime figure, while it still retains the same ol' articulation.
Minor note: Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
If there was one thing the toy planes of yonder were lacking, it was controllability. Guaranteed crash landings and the subsequent walks of shame to go pick up the pieces started to wear a little thin. The advent of radio-control provided an answer for that. But for model builders Aviation Design, that was child's play. Hense, the birth of the FALCON 7X business jet.
The 1992 and 1993 European and Canadian releases make up what is often called "Generation 1.5", much to the annoyance of many UK fans. These toys are similar in design to the Generation 2 Transformers, having lightpipe eyes, and pastel colors. The 1993 European figures used the G2 faction symbols which Hasbro UK designed because their licence on the G1 symbols had expired. The 1993 figures were repackaged for European G2 release in 1994, and three subgroup molds got used in the US G2 line.
Takara's version of the figure was released in their markets slightly earlier, as the first of what would come to be several installments in their Masterpiece line. In addition to coming with a cardboard trailer that the buyer could assemble to "complete" Prime's truck mode, Takara's release differed from Hasbro's by featuring longer smokestacks (kept short on the Hasbro version for safety reasons, but incorrectly shown to be long in the stock photography shown at right), and lacking the black scorch-marked "battle damage" paint applications Hasbro included on the figure's shoulders, wrists and abdomen.
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.
Replacing the weapons of the Hasbro releases, these new Mini-Cons transform into their larger parnter's signature weapons. They came as unassembled, unpainted model kits, similarly using stickers to fill in details. Several Arms Microns also came by themselves in bagged kits, plus there was a metric ton of promotional Microns throughout the line, possibly more than any prior line (even Micron Legend!), and that's not counting the ones that were released during the First Edition series. The Arms Microns also had multiple 5 mm posts and holes, and could be combined into super weapons, plus the larger toys were retooled to have new Arms Micron mounting points.
Apparently, early plans for the shield were to have it colored gold and silver, but it was later changed to gray and red. When a hand-painted prototype of the toy was first displayed at the 2013 New York Comic Con, the shield was colored yellow and silver; in addition, the original versions of the official Hasbro stock photos also depict the gold color, but the versions featured on the back of the toy's packaging were edited so they would accurately depict the final toy's colors for the shield. Meanwhile, the versions of the stock photos provided to websites and online retailers depict the shield in its final colors for the robot mode, whereas the vehicle mode photo is the unedited version featuring the shield's original colors. Furthermore, UK-based retailer Argos also featured unedited versions of the stock photos for both modes in one of its catalogs, causing some confusion among fans. Sometimes, the spring loaded "Automorph" feature in his head is too strong and causes the head to fly off...
I wish I could FIND more of the toys - for some reason my area is a toy desert and it seems to be hard to find good TFs. Of the ones I've been able to find, my favorites are all CHUGs, because I end up wanting to get things that look closest to G1. (Sorry. I'm old, poor, and sentimental.) I have more luck at thrift stores than I do at mainstream stores, so I have a ragtag fleet of oddballs with missing parts/untranformables locked into robot mode, etc.
Part of the first wave of 2012 Generations Deluxe Class toys, Optimus Prime is based on his Fall of Cybertron design, and transforms from a robot to a Cybertronian truck and back. His ion cannon, based on a weapon seen in his concept art, can mount via either of its two 5mm posts onto ports on his hands, forearms, back, and shoulder smokestacks. The toy is known for being oddly small for an Optimus Prime toy, especially when compared to other toys from the same line. This allows him to be more or less in scale with Grimlock and Bruticus (likewise from the same line), however. Optimus features sculpted fake wheels on his back.
Part of Hasbro's Platinum Edition offerings for 2016 intended to commemorate the 30th anniversary of The Transformers: The Movie, this Optimus Prime is yet another redeco of the Classics Voyager toy. Rather than the show-accurate colors like the Age of Extinction 2-pack figure, the toy's deco is very similar to the Classics release, with some changes and omissions: his blue plastic is a dark metallic sheen, his knee's yellow detailing was removed, his small Autobot symbol tampograph was placed on his right shoulder, and his larger one is placed on his energy unit. His side door/arm kibble is left unpainted. According to Mark Weber, this was meant to represent his abdominal area being torn in the movie's battle. (Yeah, we have no idea how it works, since the "battle damage" parts end up on his arms in robot mode.)
↑ The African American entrepreneur: then and now By W. Sherman Rogers page 321. Books.google.com. http://books.google.com/books?id=mbTUorcuXkoC&pg=PA321&dq=%22generation+2%22+transformers&hl=en&ei=woyoTPq8KI7hnQeIwOWjDA&sa=X&oi=book_result&ct=result&resnum=5&ved=0CD8Q6AEwBA#v=onepage&q=%22generation%202%22%20transformers&f=false. Retrieved 2011-04-04.
A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.
After having spent an extended period of time lost on Quintessa, Optimus was returned to Cybertron by the Turbomasters during their efforts to retrieve the similarly lost Flash, who he had been drawn into Perceptor's Dimensional Interface Assembly. The Age of Wrath Pt.5 Though badly damaged, Optimus led an insurrection against the then Megatron-controlled Cybertron, and successfully overthrew his enemy from power, all the while thwarting a Quintesson invasion. The Age of Wrath Pt.6
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.