Produced by the Chupa Chups lollipop company, this small version of Prime is essentially a battery-powered "holder" for lollipops, which fit behind his head and are spun around by a motor that activates when his pelvis is pressed. Prime has articulation in his shoulders, and his fists feature small holes that allow him to hold and store two more lollipops, in addition to the strawberry sucker he comes with. Weirdly, his Matrix compartment is open instead of having the grill front-and-center.
I have to disagree. Look at our planet. Jagged and rigid is an aspect of primitive technology. Smooth, compact, and protected is an aspect of futuristic technology. Transformers should look more advanced than what we hsve, nor technologically regressive. They have better scientists and millennia of knowledge compared to us. Smooth designs like Knight's are the only ones that make realistic sense in that context of technological progression, even as a life form.
The bio for the Botcon 2015 version of Megatron reveals that he comes from an alternate reality where Megatron achieved victory during events similar to Dark of the Moon and killed both Optimus and Sentinel Prime. However, Rodimus Prime then arose to challenge him, facing him in a battle that Megatron ultimately chose to flee, resulting in him ending up in the Axiom Nexus.
A redeco of the Dark of the Moon Deluxe Class toy, this Optimus Prime has large portions of his body, mostly his truck parts, vacuum metallized silver, and his light-piped eyes were neutered by blue paint. He comes with a redeco of Generation 1 Rampage's sword, which can be wield by his 5mm-compatible hands (Although not shown in the instructions). As his body, legs, and front truck kibble were chromed, care must be taken while transforming, especially with the shoulder kibble & the bottom leg's posts (This can be amended if you slightly widen the holes with 3mm hand drills). As with the original Dark of the Moon Deluxe Class figure, the instructions did not mention about forming the sleeper part until step 10, the pinky finger prevented the sword to peg down through his hands, and of course: his truck mode can attach with the Armored Weapons Platform included in the Chronicle or the Movie Trilogy Series figure. This figure has slightly loose shoulder joints.
The Transformers Adventure Easy Dynamic Series release, titled "Big Optimus Prime", features extra paint details and has two additional Autobot symbols on his shoulders. He also includes a different scannable badge, which is compatible with TakaraTomy's Transformers Adventures app. Scanning this will unlock Big Optimus Prime in the collection list. Unlike the American release, Big Optimus Prime is packaged in a windowed box, instead of an an open package.
A non-transforming model kit of Optimus Prime by Takara Tomy, sold exclusively in Japan. The kit comes with a pre-assembled inner frame that features a high rate of poseability similar to Master Grade Gundam model kits. The kit comes with two swords and two different sets of attachments for them: one set for the forearms and the other to replace the hands. Pre-ordered units of the first batch came with battle hooks.
Alternatively, if Optimus chose to retreat either when initially confronted with the overwhelming Decepticon threat, or after realizing that his troops are too weak to fight after ordering them to concentrate their firepower equally amongst the intruding Decepticons, the ensuing underground adventure can have multiple outcomes; the Autobots become the captive of the Insecticons, forcing Optimus to either entrust Beachcomber with the fate of his troops, or to bargain with the Insecticons for the safe release of his Autobots; or dealing with the theft of the Sun-Pak by either duelling Megatron for the device's ownership, stealing the Sun-Pak back from the Decepticons or charging Mirage and Buster with the device's retrieval. If Optimus duels Megatron for the device, he either wins through brute force or by being more "cunning" than Megatron and destroying the device before the Decepticons can claim it as their victory prize. If Optimus attempts to steal the Sun-Pak under the Decepticons' noses, Optimus is shot by Megatron when the Decepticon leader notices Optimus and Smokescreen skulking towards the Sun-Pak. The Autobots nonetheless retrieve it when Smokescreen blots out the sun with his emission fumes, forcing Megatron to pass the Sun-Pak towards Buzzsaw in order to bypass the Autobots' smog cover, only for Optimus to intercept Megatron's pass and drive away with the Sun-Pak in Autobot possession. Finally, if Optimus has entrusted the Sun-Pak's retrieval to Mirage and Buster, the Autobot leader makes the duo swear not to engage the enemy for fear of their safety. If his Autobots keep their promise to him, Optimus is called in alongside the rest of the Autobots when the Insecticons are discovered, and Optimus leads a successful ambush towards the Insecticons, at the cost of the Sun-Pak itself. Attack of the Insecticons
In the event that Windcharger successfully turned the Decepticons’ forcefield off, reinforcements burst into the base just as Megatron was strike Optimus from behind. A wayward shot from Megatron then revealed the location of the gravity gun to the Autobots. Optimus ordered his troops to charge the weapon. Hook caught Optimus in the gravity gun’s sights, and sent the Autobot leader floating upwards.
Nonetheless, I remain a big fan of Lego and although I think they have somewhat moved away from their roots with the excess of licensed products (and the earlier licensed products were, in my opinion, not very good because they contained too many specialized non-generic pieces that weren’t useful for generic building. But that situation is improved and in particular we have found the Star Wars sets to be of most value for generic building, because they generally have very few really specialized pieces (although to be fair the sets are most useful for building other spaceships, etc).
This reissue of the original Generation 2 Laser Optimus Prime figure was made using the modified version of the mold created for Robots in Disguise Scourge, lacking the sculpted Generation 2 Autobot insignias on the disks featured on the original. It sported a modified deco, with the flat grey plastic on both the trailer and Prime's chest now replaced with silver chrome; additionally, new Autobot symbol tampographs were added to the doors of Prime's cab mode and the front end of his trailer, and a pair of new chest-window stickers featuring an illustration of the Matrix of Leadership replaced the original decals.
The first Nightwatch Optimus Prime is an extensive redeco of the previously released Leader-class Optimus Prime, replacing most of his red and blue with different shades of blue and black. In fact, he resembles the original Diaclone Powered Convoy color scheme of Generation 1 Ultra Magnus's truck cab. The previously blue and red flames have been replaced with silver flames, while various other decos have been replaced by copper.
When Optimus and Hound eventually made their way there, they found that C-81 and his gang of criminals had escaped prison and were combating the Waruder soldiers responsible for the planetary shutdown. Optimus mistakenly assumed that C-81 and his goons were there on purpose, and joined them in fending off the invaders. They were soon joined by Burn Out and Lift-Ticket, who informed the Cybertronians that they had stumbled across the Waruders' main hive. Lift-Ticket explained the Waruders could be repelled if he managed to get a sample of the hive's venom. Optimus was willing to go along with Lift-Ticket's dangerous plan, despite C-81's skepticism. However, the battle came to an end when C-81 managed to grab a hold of the Waruders' leader, and forced the bug into peaceful negotiations. Optimus agreed to allow the Waruders to migrate to another Cybertron via C-81's illegal interuniversal gate, in exchange for a venom sample that would be used to create an anti-toxin to revive the TransTech. The General nonetheless impounded C-81's gate afterwards, though he did let the criminals "slip away" as thanks for their part in thwarting the Waruder invasion.
If the Autobots went along with Prowl’s strategy, the resulting heat from the explosion caused the Autobots’ circuits to overheat, rendering them unconscious. Upon reawakening, the Autobots found themselves captives of Megatron, who informed them that their fellow Autobots would soon perish, and that the humans would be conquered by the Decepticons shortly after.
Part of the second wave of Warrior class figures, this Deluxe-sized Optimus Prime transforms into a futuristic trailer truck. Due to his simple transformation scheme, he has a faux window chest in robot mode, while the end of the front trailer kibble has extra toes. Optimus Prime also comes with an axe, which was based on the Energon Axe weapon from the War for Cybertron game. Undocumented in the instructions, Prime's axe can store between his trailer, or plug into ports on either of his shoulders. His scannable Autobot insignia is on his robot mode left shoulder and is easily scannable while still in-package.
In "The Elite Guard", the Autobot Elite Guard, composed of Ultra Magnus, Jazz, and Sentinel Prime, arrive on Earth to reclaim the Allspark. They don't believe Optimus' story about the Decepticons and Sentinel Prime wishes to have him court-martialled. When a fragment of the Allspark causes a production line to go haywire, Optimus finally stands up to Sentinel, retrieving the fragment, and earning praise from Ultra Magnus.
Optimus Prime started life as Optronix (Orion to his friends), Hardwired a data archivist at the Vaults. After taking note of a battle in which the Autobot leader Sentinel Prime had been defeated by Megatron, he was summoned to the Council of Ancients and informed that the Matrix had chosen him to be the next leader of the Autobots. He received the Matrix of Leadership shortly thereafter, gaining a powerful new body in the process. After dispatching a Decepticon assassination squad sent to, well, assassinate him, he ordered the Autobots to prepare to evacuate Cybertron, intending to leave the Decepticons to their own devices. The War Within #1
Not depicted in the instructions or stock photos, Roller can attach to Prime in vehicle mode via two tabs on the vehicle front which slot into two corresponding slots on Prime's feet. Another undocumented feature is that the butt of the Ion Blaster can be inserted between the barrels of Roller's weapon mode to form a longer weapon. Also not shown in the instructions but depicted on the stock photo on the card-back is that Prime's shoulderpads can be rotated up; the intended positioning for this is notched, although you can position them at other angles.
Kiss Players Convoy is a redeco of Alternators Optimus Prime. Unlike the Alternators version's bare red plastic, he is covered in a deeper red paint. Some of his body parts are cast in different colours, such as his shins, and has a much more intricate paint deco based upon Masterpiece Convoy. He is armed with his small engine pistol and a pink surfboard that can be reconfigured into either two small blades or a large double-bladed sword.
Released by TakaraTomy as part of a 2010 promotion honoring the "future era" of the original cartoon (which was set in 2010 in Japanese continuity, you see!), this exceptionally morbid re-release of the Masterpiece Convoy figure recolors the Autobot leader in blacks and greys, representing his dead body from The Transformers: The Movie—but don't worry, kids, it's actually a "sleep mode", according to the figure's name! Limited to 2010 pieces in Japan (see what they did there?), it comes with all its customary accessories, including the Perfect Edition trailer, redecoed where appropriate: the trailer itself has become translucent, its energon-axe is now transparent grey, and Megatron, in another movie homage, is rendered in translucent purple, evoking the scene depicting his transformation into Galvatron. The figure was also released in other parts of Asia as a limited edition of 2010 as well, combined with the Japanese edition for 4020 total. The Japanese version denotes "Serial Number in Japan: ####/2010" on its bio card with the number out of 2010, while the Asian version denotes "C1 - ####/2010" with the number out of 2010 on its bio card.
NEW! TFSource News - IF Catastrophe, Flame Toys Tarn Final Stock, MMC Cylindrus, MP-36+ Megatron & More! NEW HOT INSTOCK ITEMS: - Iron Factory - IF-EX24X War Giant Catastrophe - Set Of 5 - Flame Toys - Transformers - Tarn - Mastermind Creations - Ocular Max - R-34 Cylindrus - Mech Fans Toys - MF-37 Veteran and MF-20 Scourgers - Magic Square - MS-B02F Fevernova - Diaclone Reboot - DA-30 Powered System Maneuver Gamma & Delta Set - Planet X - PX-C01 Ismenios - Transformers Encore - - Read More
In this universe, Optimus is a veteran military commander and second in command who wields an ion blaster and a double bladed energon axe. He became the leader of the Autobots after Zeta Prime fell in battle, but is not certain he wants the responsibility. The war with the Decepticons was going badly, and it looked like there was no end in sight. He vowed to himself and to the warriors under his command that he would never surrender, never retreat, and never stop fighting until the Decepticons were defeated.
There is also a smaller "Legends of Cybertron" Micro sized version of this Optimus Prime, without a trailer, and a Burger King Kid's Meal toy, again without a trailer. There is also a rotating sucker holder version of Cybertron Optimus Prime. Later releases of the Leader class and Micro class Optimus Prime were repainted in darker colors, supposedly representing Optimus Prime after the television story. This toy is called Galaxy Force Optimus Prime. A special metallic painted version of this toy was included with Megalo COnvoy in Japan.
If you are looking for good Amazon deals and bargains, Today’s Deals is the place to come. We are your online one-stop shop for savings and specials on our products. Need a last-minute gift for your spouse, grandmother, or co-worker? You can find great deals from Amazon's Today’s Deals regardless of whether you are looking for items for yourself or your family and friends.
The 5-inch Power series is a little more complex (4-9 steps) and a little more spoilery, because it’s the first hint we’ve gotten that Megatron might be a part of the Transformers: Bumblebee movie. Sporting a similar form to previous versions, his alt mode is a 4-track Cybertronian tank (with the usual very conspicuous face…funny how a lazy toy design decision from the first movie has now become cannon). The Power series also has the only Dropkick Energon Igniters toy. You can use the cores sold with the Power Plus and Nitro toys to unlock special features. Camaro ‘Bee and Hot Rod round out this series.
Knight Armor Turbo Changer Optimus Prime is a Voyager-sized figure that transforms from truck to robot in just 2-steps: pulling his whole truck kibble to the front then fold down to complete the robot mode, although converting him back requires some few steps. His only articulation is the elbows, and he features 5mm compatible hands. He also features a "Knight Armor" gimmick, which consists of his mask popping out to his head with the press of the button on his chest. Take note that you need to flip back the mask manually before you turn him back into Truck Mode.
The Japanese version of the toy, named "Optimus Prime Revenge Edition", was exclusively available at Tokyo Toy Show 2009, and later also from e-HOBBY. Despite being sold in Hasbro packaging like the mass retail Revenge toys in Japan (plus the addition of Japanese stickers marking it as a Japanese market release and containing Japanese safety warnings and manufacturer information), it slightly differed from the Hasbro version insofar as it lacked the tampographed kanji lettering.
In Transformers: Armada, Optimus Prime shares the role of main protagonist with Rad, Alexis, Carlos, Starscream and Hot Shot. The Optimus of this universe shares many similarities with his parallel universe versions, including nobility of spirit and a strong desire to protect all humans on Earth. In this continuity, the two sides are not looking for energon, but a small race of power-enhancing transformers known as Mini-Cons. Optimus led his small band of Autobots to stop Megatron from acquiring their power for himself.
The third United Optimus Prime toy is a redeco and slight retool of the Deluxe Class figure from Hasbro's 2010 Transformers toyline, itself an homage to Prime's Generation 2 "Laser" form. The toy features translucent blue plastic as opposed to Hasbro's orange, red paint is used on the biceps instead of blue paint, extra red paint applications on the knees like the original's sticker detail, and more broken-up red apps on the shoulders. Silver detailing was added to the cab mode on the grill, the bumper, and near the doors. The blue plastic in cab mode is now black plastic to make the figure more accurate to the Generation 2 original. The gray plastic is changed from the Hasbro version to more closely match the 2006 reissue of Laser Optimus Prime. Black paint was applied to the cab mode to mimic the fade from red to black on the original Laser Optimus, but still includes a flame deco like the Hasbro version, only in a different design. It lacks the roof-mounted rubsign of the Hasbro version, instead including Autobot insignias on the cab doors. (Disappointingly, they are Generation 1 insignias, rather than Generation 2 ones!) Additionally, a retool was made to the peg on the inside of his right shoulder, to make it shorter and wider than the Hasbro version, allowing it to move freely without hitting the torso, unlike the Hasbro release.
Like the First Edition figure, Battle Command Optimus Prime's truck kibble can be detached from the robot mode figure to form his separate vehicle mode on its own, but there is one single sacrifice is needed to be made, so brace yourselves: you need to actually trim off the wires that activates it's lights & sound gimmick in order to separate the kibble from the robot, so good luck if you wanna risk your hard-earned cash for that.
Unlike the stock photography, the actual toy doesn't feature a mouthplate. In October, : The two-pack was one of the three Evolution 2-packs available as a Toys"R"Us exclusive in Japan, with no changes on the figures with an exception of the packaging, which the front box features Japanese translated versions of the English text, and a sticker on the back confirming that this was a Japanese release. The robot mode stock photo lacks the gun nozzle/missile.
Though the figure does a much better job of conveying the on-screen character model than the ROTF Leader Class mold did, there are still a few inaccuracies—most notably the forearm and shoulder pad designs and the head/torso proportions. The final product also lacks certain paint details visible in stock and packaging imagery, such as the blue rings on his feet and the gold on his pelvis. It should be noted that this mold does not combine with Jetfire.
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.