Today, generally the creator sets only emphasize Lego as a building system. They come with pieces and instructions for two alternate models. Generally, Creator sets utilize a more basic color selection and look less “realistic” due to the emphasis on a versatile piece selection. Contrast that with current licensed themes and even Lego’s own proprietary themes. Themed/licensed sets are now trying to achieve more “realistic” models. As a result, piece and color selection skews toward more specialized pieces and colors again making the “critical mass” of pieces harder to achieve.
Available in the Timelines "Generation 2" 2-pack alongside Sgt. Hound at BotCon 2015, General Optimus Prime is a redeco of Generations Voyager Class Roadbuster based on the cancelled Generation 2 General Optimus Prime toy. He transforms into an off-road vehicle and comes with numerous weapons, all of which peg via 5mm post onto his vehicle rear/legs, shoulders, upper & lower arms, and hands: a spring-loaded, missile-firing launcher, a pistol, a rifle, and two small cannons that respectively form the scope and stock of the rifle. All of his weapons can combine to form an unwieldy superweapon. It was unknown if this figure has the loose ratcheted shoulder joints from the Legends release of the mold.
Part of the fifth wave of 2012-onwards Generations Deluxe Class toys, Thrilling 30 Orion Pax is a new mold with a robot mode inspired by Guido Guidi's design for the character, originally seen in Spotlight: Blurr. Some liberties have been taken with the original concept to facilitate his truck mode, which is a new design not based on the Guidi art. He comes with his Ion Blaster and an Energon Axe with a transparent red-orange blade, both of which can peg onto 5mm ports on his hands and vehicle rear sides. Although not depicted on the instructions, the Ion Blaster can also peg into the hole in the larger blade of the Energon Axe.

Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.
If Sparkplug suggested that the Autobots remained in their vehicle modes, he would concoct a plan where the Autobots would help evacuate the entire town in their vehicle modes. With no more than four trips in and out of the city, Optimus and the rest of the team carried out the plan without incident. The Autobots then transformed and engaged the approaching Decepticons, whom they easily dispatched. With the city safe, the Autobots moved out to help their comrades at the Decepticon fortress.
The Japanese release of Powermaster Optimus Prime actually represented a new character named Ginrai, and featured several retools: the cab featured die-cast metal, shortened smokestacks, vacuum-metalized plastic and clear blue windows, while the trailer was given retractable super robot fists. This Japanese version was eventually issued by Hasbro in 2003 as part of the Commemorative Series collection (see below).
Following the awakening of the Transformers on Earth, the Autobots protected the planet from the Decepticons. Over the next fifteen years, the Autobots befriended the humans, particularly the Witwicky family. The Autobots finally allied with humankind and eventually defeated the Decepticons at the turn of the century. They planned to return to Cybertron aboard the newly constructed Ark II, along with seven humans, including Witwicky patriarch Sparkplug. Prime Directive #1 Before the ship departed, Prime gave a piece of the Matrix to Spike Witwicky, Sparkplug's son and Bumblebee's closest human friend. Prime Directive #2 But the ship was destroyed as part of a military conspiracy to take control of the Transformers.
Shortly after reaching the other shore and taking out Skywarp, Prime witnessed the gigantic Bruticus bust out of the Terrordrome and attack everything around him. With Superion gone, Prime knew that there was only one way to stop this rampaging monster, and ordered his Autobots to evacuate the humans while he went looking for the Matrix of Leadership. He soon found that Snake-Eyes was in possession of the artifact, but was under attack from Megatron. Prime attacked Megatron, keeping him at bay while telling Snake-Eyes that destroying the Matrix would kill Bruticus. The ninja complied, only to learn that Optimus had left something out of the story: smashing the Matrix would kill all the Transformers, including Prime himself. Looking at the Autobot leader's body, the Joes knew that Prime had been aware of this, and had deemed it a necessary sacrifice to save the humans. The Iron Fist
When IDW Publishing received the rights to the series, author Simon Furman was hired to oversee the line. Furman decided that the Generation 1 continuity "was in need of ... a contemporary restart"[15] so that the comic could retain a modern audience. Furman's revised continuity establishes Optimus Prime as the present-day leader of an Autobot army spread across the galaxy in small units, waging a covert war against teams of Decepticon infiltrators over resource-rich worlds. The Stormbringer miniseries explains that the Transformer homeworld of Cybertron is a dead planet, ravaged by an ancient cataclysm caused by the Autobot-Decepticon War. Prime had been forced to ally with his arch-rival Megatron to end the destruction. In the series, the interference of Jetfire and the Technobots, in a plot organized by the Decepticon Bludgeon, alerts Prime to the possibility that the Cybertronian cataclysm might be re-ignited and spread to other planets. Prime calls in the Wreckers, meeting them on the surface of Cybertron in time to witness the return of the being called Thunderwing, the focal point of the apocalypse. The combined efforts of Prime, the Wreckers, Jetfire, the Predacon-led Decepticons, and a unit of aging Centurion drones are barely enough to render Thunderwing inert.
In 2017, the Jazz action figure from the "Power of the Primes" line featured printed in Cybertronian alphabet "MAGA", an acronym for the phrase "Make America Great Again" most notably associated with Donald Trump and Alt-right. A spokesperson for Hasbro responded to io9 about the issue and stated that it was inserted onto the figure by one of their vendors and would address it with them.[4]

The main difference is an extensive redeco, rendering Prime in his traditional colours instead of the iPod-inspired white. (Yes, it actually had more to do with iPods than Magnus, believe it or not.) Reminiscent of the Kiss Players, iPod Optimus Prime's entire ABS/PVC structure is painted over, including his fists and the silver stripe that runs along his chest. His wind shield is colored blue like the one in the 2002 New Years Convoy reissue. The silver-grey trailer has a fairly elaborate deco, featuring detailing that resembles the outward appearance of the traditional Prime trailer, including the doglegging blue stripe and Autobot symbol, an effect somewhat marred by the large, visible gap on one side. When reconfigured into dock mode, the interior surfaces surrounding the speakers are decorated with black-on-silver techno-patterns as well as three, count 'em, three logos proclaiming the name "Optimus Prime". The recessed space also features a stylised, almost Frank Milleresque, high-contrast portrait of Prime's face, although this would be largely covered by the intended insertion of an iPod.


This mold was redecoed in 2000 as Car Robots Black Convoy, and slightly retooled as his US incarnation "Scourge". After Scourge, the next use of this mold was planned to be Toxitron, which ended up being canceled. The slightly retooled version of this mold was released in 2006 in Japan as reissue Battle Convoy, which was the name of this toy during the Japanese Generation 2. The reissue used the Robots in Disguise modified tooling, with a slightly modified deco using silver vacuum-metalized plastic on his chest and trailer sides along with additional paint applications and G2 symbols. The mold was also redecoed to create a new Generation 2 version of Ultra Magnus as an E-Hobby exclusive (unusual in that the character was killed in the course of Japan's Generation One fiction).
Optimus Prime (Clear Ver.) is a redeco of Revenge of the Fallen Legends Class Optimus Prime in black and clear blue plastic, available only in the August 2014 issue of TV-Kun magazine. His only paint operations are on his abdomen and face, but stickers for additional detail are included on the issue's sticker sheet. Optimus Prime has been slightly retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock.
This is a redeco of the 2004 20th Anniversary Optimus Prime, released to coincide with the 20th Anniversary of the original Transformers animated movie and DVD release. He is painted in flatter, non-metallic colours to more closely resemble the original cartoon model, as well as the Voyager-class Classics Optimus Prime figure. The color of the light of his feet has changed too. As a cost-cutting measure, all vacuum-metalized plastic has been replaced with with silver and gold paint. Confusingly, his Ion blaster is now cast in blue plastic.
Alternatively, if Optimus chose to retreat either when initially confronted with the overwhelming Decepticon threat, or after realizing that his troops are too weak to fight after ordering them to concentrate their firepower equally amongst the intruding Decepticons, the ensuing underground adventure can have multiple outcomes; the Autobots become the captive of the Insecticons, forcing Optimus to either entrust Beachcomber with the fate of his troops, or to bargain with the Insecticons for the safe release of his Autobots; or dealing with the theft of the Sun-Pak by either duelling Megatron for the device's ownership, stealing the Sun-Pak back from the Decepticons or charging Mirage and Buster with the device's retrieval. If Optimus duels Megatron for the device, he either wins through brute force or by being more "cunning" than Megatron and destroying the device before the Decepticons can claim it as their victory prize. If Optimus attempts to steal the Sun-Pak under the Decepticons' noses, Optimus is shot by Megatron when the Decepticon leader notices Optimus and Smokescreen skulking towards the Sun-Pak. The Autobots nonetheless retrieve it when Smokescreen blots out the sun with his emission fumes, forcing Megatron to pass the Sun-Pak towards Buzzsaw in order to bypass the Autobots' smog cover, only for Optimus to intercept Megatron's pass and drive away with the Sun-Pak in Autobot possession. Finally, if Optimus has entrusted the Sun-Pak's retrieval to Mirage and Buster, the Autobot leader makes the duo swear not to engage the enemy for fear of their safety. If his Autobots keep their promise to him, Optimus is called in alongside the rest of the Autobots when the Insecticons are discovered, and Optimus leads a successful ambush towards the Insecticons, at the cost of the Sun-Pak itself. Attack of the Insecticons

The toy that would ultimately end up as the original Optimus Prime toy was originally released in August 1983 as No.17 Battle Convoy from Takara's Diaclone Car Robo toyline in Japan. In 1984, Joustra released their own version (still with Diaclone sticker on the trailer) as part of their Diaclone line in Europe, either simply called Truck (according to the pack-in catalog) or Diaclone (in the pack-in comic). It's possible that GiG also released a version called Camion Convoy as part of their Trasformer line in Italy, but to this day no packaged sample has surfaced.
A Japanese TV Magazine exclusive, this release of the Super-Con class Prime toy has almost all of his parts cast in translucent coloured plastics—hence the 'crystal' moniker—representing the character's disembodied spark after his destruction in the Armada cartoon episode "Crisis" and resurrection in "Miracle". What that means for poor Over-Run (or "Surge" in Japan), also cast in translucent plastic, we couldn't say! Available via mail-order, only 5000 pieces were distributed in October of 2003.
Our Deal of the Day features hand-picked daily deals with low prices on top electronic products, video games, tools, items for your kitchen and home, sporting goods, computer software, and more. Every day you will see our Lightning Deals displaying limited-time deals at great prices; make sure you buy quickly because these deals will go away fast. Our other Savings and Sales include hundreds of items throughout Amazon to pique your interest for savings on HDTVs; movies or TV shows; fashion items like clothing, jewelry, and watches; toys; and magazines. Come back often as our deals update daily.

Q-Transformers Optimus Prime is a super deformed toy based on his Age of Extinction design, transforming into a cute little Western Star 4900 SB. It was sold as an exclusive at Transformers Expo months before the proper release of the toyline. Being only one inch and a half tall, this is actually the smallest transformable figure of movie-verse Optimus Prime, and it even gets close to being the tiniest transformable Optimus Prime ever made if it wasn't for another slightly smaller Q-Transformers release.

The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
Based upon the "Protoform" (Cybertronian) appearances of the Transformers in the Movie, Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. A flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail. The bottom of the vehicle has small wheels to roll the toy across smooth surfaces. Oddly, it has NO automorph gimmick at all, a feature most main-line figures have.
Alerted by Bumblebee of Megatron's latest plan, Optimus Prime led the mission on Wheeljack's ship to foil them. He sent Bumblebee on an underwater scouting mission, and took part in a pitched battle that ended in the Decepticon's being defeated. Search for Treasure Under the Sea When Rumble dropped rocks on the Autobots, Optimus used Roller to eliminate most of them. Unfortunately he was forced to surrender when he saw the other Autobots had been captured by the Decepticons, and was placed in a special Autobot prison. Luckily Bumblebee remained free, and after he'd rescued the others, Optimus wrapped Megatron up with an iron bar. Bumblebee to the Rescue!

The Transformers Energon figure pen is based on Optimus Prime in his standard Energon body. About the size of a scout class toy, he transforms from truck mode to robot mode almost identically to his mainline toys, apart from the fact that his feet contain the pen and cannot bend. It's really hard to write with, and almost impossible to pose, even though it has full arm articulation. Amusingly, this figure can position itself to transform into his super robot mode (by flipping his helmet on, opening his chest and flipping his hands in), but because there are no versions of the Prime Force drones in this scale, it's impossible to complete him.
Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
The values started becoming inconsistent and skewed in Generation 2 and Beast Wars, when Hasbro apparently thought no child will ever want a toy that is described as anything less than perfect. Thus it became rarer and rarer to see any low numbers. Most characters' numbers hardly ever dipped below 8, the Go-Bot version of Optimus Prime was the first character to have all values at 10, a trend that would repeat for most "leader" characters. When even more powerful versions of the Optimus Primal toy (such as Optimal Optimus) were introduced, Hasbro even invented a "10+" rating in an attempt to keep increasing the power levels. With the Transformers: Cybertron line a few characters even got "Unknown" and "Infinity" ratings.
Optimus Prime is armed with two large rifles formed out of a combination of both smokestacks and fuel tanks. These rifles peg into lower arms with grips for his open hands. The under-slung fuel tanks can fire spring-loaded projectiles. In vehicle mode, both smokestack rifles can be deployed as twin cannons, and this mechanism can also be used to store the rifles and deploy them as shoulder guns in robot mode.
A non-transforming model kit of Optimus Prime by Takara Tomy, sold exclusively in Japan. The kit comes with a pre-assembled inner frame that features a high rate of poseability similar to Master Grade Gundam model kits. The kit comes with two swords and two different sets of attachments for them: one set for the forearms and the other to replace the hands. Pre-ordered units of the first batch came with battle hooks.[138]

G1 Convoy comes with two sets of fists, each pair featuring differently-shaped fist holes: one pair with square holes to hold the figure's "Convoy Gun" (as his ion blaster is called), and the other with round 3mm-compatible holes to hold the spring-loaded translucent blue missile launcher (a generic accessory also available with Robotmasters Beast Megatron and Beast Convoy). The fists are swapped out by simply popping them out of the wrist-hinge that holds them in place; the figure also includes an energon-axe that can be inserted into the wrist instead of a fist.


Ultra Magnus is a redeco of the Diaclone "Powered Convoy" figure, itself a redeco and slight retool of "Battle Convoy", the toy that became the original Optimus Prime figure, sporting a new trailer. One of the last few Diaclone toys to be released in the Transformers toyline, Magnus was recolored from the original toy's dark blue, red and black color scheme into a more patriotic red, white and blue, though his chestplate, which was rendered white in his package art followed a more the blue color scheme of his shoulders. He transforms into a Freightliner COE, towing a car-carrier trailer capable of transporting up to four normal-sized Autobot cars. As with Optimus Prime, his cab transforms into a small robot, which can then combine with the trailer to form a "super robot", although all original Generation 1 fiction prior to the 21st century ignored this and simply rendered the super robot as Magnus's default robot form. To facilitate this combination, Magnus sports a slightly longer front axle than Prime, thereby creating tabs on either side of the cab that slide into grooves in the trailer to help lock the small robot into place. He is armed with a rifle sporting two handles that allow either of his robot modes to hold it, and two shoulder-mounted missile launchers, whose spring-loaded firing mechanism was removed for the Hasbro release of the figure.
×