I had a transformers armada (ew) style Megatron with horns like a stag beetle that would turn into a tank. I actually liked the whole design and was upset when my sis broke it on purpose. She'd always tell on me for stupid shit so I saved this incident as a trap card for later. Too bad this sort of thing had a statute of limitations in our house lmao.
An exclusive to Amazon.co.jp, this redeco of Optimus Prime is bundled with the Japanese release of the Revenge of the Fallen DVD. He is another in a long line of black repaints, swapping most of his red and blue plastic for black, some of his bright grey plastic for a cool grey and blue, and is covered with gold and silver flames. His orange blades are now translucent blue.
↑ The African American entrepreneur: then and now By W. Sherman Rogers page 321. Books.google.com. http://books.google.com/books?id=mbTUorcuXkoC&pg=PA321&dq=%22generation+2%22+transformers&hl=en&ei=woyoTPq8KI7hnQeIwOWjDA&sa=X&oi=book_result&ct=result&resnum=5&ved=0CD8Q6AEwBA#v=onepage&q=%22generation%202%22%20transformers&f=false. Retrieved 2011-04-04.
Outstanding work here. After reading a number of complaints about how the price has ‘increased’ over the years, it’s great to see this analytical approach. One additional hypothesis I have is related to the increase in the number of sets released each year, which would appear to be supported by your data. More sets to buy to be ‘complete’ makes for more money out of pocket.

This gold vacuum metallized (save for his black joints, which they were made out of unpaintable plastic) Protoform Optimus Prime figure was featured as a Lucky Draw giveaway (along side similarly gold vac-metal versions of Voyager class Optimus Prime and Protoform Starscream) in the December 2007 issue of TV Magazine. Released in 2008, only 5 pieces were made, making it one of the rarest Lucky Draw figures; the images at right represent the only known photographs of it.

If Sparkplug suggested that the Autobots remained in their vehicle modes, he would concoct a plan where the Autobots would help evacuate the entire town in their vehicle modes. With no more than four trips in and out of the city, Optimus and the rest of the team carried out the plan without incident. The Autobots then transformed and engaged the approaching Decepticons, whom they easily dispatched. With the city safe, the Autobots moved out to help their comrades at the Decepticon fortress.
Part of a cross-promotion between Toyota and TakaraTomy, the deluxe-sized FJ Optimus Prime transforms into an FJ Cruiser, with his axe weapon becoming the vehicle's spare tire. The vehicle mode's body panels come packaged on the sprue, and can then be clipped onto the core figure. The mass retail release of FJ Optimus includes yellow and white panels, whilst further color variations were available when purchasing an FJ Cruiser at Japanese Toyota dealerships. As is typical of TakaraTomy exclusives, these variants came in grayscale packaging.
This redeco of Henkei Convoy is cast almost entirely in translucent colored plastic. Also known by the nickname "Crystal Convoy" among fans, it was first released as an exclusive for the Japanese convention Tokyo Toy Fair 2008, limited to 1000 pieces at the event, but was later made available through e-HOBBY. It was sold in a monochrome-blue version of Henkei Convoy's regular packaging.
A Japanese TV Magazine exclusive, this release of the Super-Con class Prime toy has almost all of his parts cast in translucent coloured plastics—hence the 'crystal' moniker—representing the character's disembodied spark after his destruction in the Armada cartoon episode "Crisis" and resurrection in "Miracle". What that means for poor Over-Run (or "Surge" in Japan), also cast in translucent plastic, we couldn't say! Available via mail-order, only 5000 pieces were distributed in October of 2003.
Optimus and Prowl secretly guarded a shipment of microchips that could be used to imbue sentience onto robots. Posing as the lorry transporting the precious cargo across the Yorkshire Dales, he was attacked by Megatron and Rumble who sought the microchips to create an army of Decepticons. With your help, Optimus may or may not have been successful in keeping the microchips out of the Decepticons' hands. Highway Clash
Hasbro's original plan for the Beast Wars was to have Optimus Prime, renamed Optimus Primal, and Megatron be reformatted versions of their 1980s selves. This was shown in the toys's Tech Specs, and in the comic packaged with the basic Optimus Primal/Megatron two-pack. Hasbro also wanted the "Mutant Heads" found on all of the deluxe sized first year toys as battle helmets, but Mainframe scrapped the idea as it would have required three animation models for each character instead of two. Another designed feature for the 1995/1996 toys was carried over from Generation 2, transparent "light pipe" eyes. However, most toys had those parts cast in opaque plastic.

Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.
Optimus appeared in the 2008 BotCon voice actor play "Bee in the City", voiced by David Kaye. In this story, Professor Sumdac attempts to create a teleportation system to get the Autobots to Cybertron, but an interaction with Sari's key ends up transporting Optimus Prime, Bumblebee, and Sari to Transtech Cybertron. There, they met Flareup and are detained by Shockwave. Bumblebee teams up with Beast Wars Megatron to free his comrades, but must then stop Megatron from taking the key for himself. Afterward, the Autobots and Sari returned to their own dimension.
As the two Titans battled, Optimus found Megatron watching the fight and demanded he assist them, but Megatron refused. When Trypticon swallowed the Enigma of Combination and took control of the Combiners, Optimus attempted to attack them as a distraction, but he was caught and the Combiners attempted to pull him apart. Optimus managed to break free of his captors and was further saved by the timely arrival of Megatron. Against Optimus's wishes, Perceptor returned and tricked Trypticon into swallowing the Matrix. Consumed However, this ultimately proved successful, and Trypticon released all that he had swallowed during the conflict before falling inert once again. The relief was short-lived, though, as Megatronus suddenly appeared before them, proving Optimus's fears. Optimus and Maximus attempted to surprise attack Megatronus, but he brushed off their blows and fired a beam through Optimus's chest, killing the Autobot once more. All Things Must Pass
This release is a redeco of the Cyberverse Commander Optimus Prime figure, with a lighter gradient paint job that lacks the flames, and with Optimus sporting a G1 insignia. Instead of his jetpack and guns, he comes with his trailer/Armored Weapons Platform, which can transform into a base and exo-suit. The trailer itself features movie-style insignias.

In order to come to some sort of conclusion about the price of LEGO, I needed to get some data on the historic retail prices of LEGO sets. The best source of this information is brickset.com. This website has data on almost all LEGO sets ever made and the retail pricing for many of them. I wrote a web scraping program to go through the Brickset database and make a database of set information. In order to keep the results relevant, I decided to compile one set that fit two basic qualifications:


Prime's new trailer is essentially a heavily armed version of the original, with two double-barreled heavy laser cannons mounted on two arms with visible fists. The rear has a fold-down ramp to allow the storage of a smaller transformer, or perhaps spare accessories. The trailer can be transformed into a Powermaster battlestation that can allow other Powermaster engine figures to man the heavy laser cannons.
Optimus Prime's Japanese name is "Convoy", which is named after his original name "Battle Convoy" in the Diaclone toyline, because the name "Optimus Prime" is difficult for Japanese kids to remember and pronounce.[2] All Optimus-inspired characters were called variations of Convoy in Japan up until the 2007 Transformers film, at which point TakaraTomy changed their minds and began using the name Optimus Prime as well. Presumably to avoid confusion, this change includes the Generation 1 version of the character as well, who is now called Optimus Prime in newer products and fiction such as Transformers United and Transformers: All Spark, though his name remains Convoy in material aimed at adult collectors such as Alternity and Masterpiece.
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
The main selling point of the toy is the ability of the truck cab to combine with the trailer to form Super Optimus Prime. The cab portion folded in half and sat in the chest cavity of the trailer's torso, giving him the classic Optimus Prime truck-chest appearance. The two double-barreled cannons were attached to his shoulders and a large, separate head piece was mounted onto the hole on top of the truck cab.

Hot Rod first appeared in the American animated series during the events of The Transformers: The Movie (as a main protagonist), where he was one of the many Autobots stationed at Autobot City.[5] He was first seen fishing with Daniel Witwicky. When Daniel saw the shuttle that was going to make a supply run to Autobot City, he told Hot Rod and together they both went to an observation point, only to see a hole in the shuttle. The ship had been previously hijacked by Decepticon forces led by Megatron, with its crew killed.
Optimus Prime is primarily voiced by Peter Cullen in most of his incarnations, who voiced him in the original series. Following the production of the 2007 film, Cullen reprised his role for the sequels and supporting media and would even voice Optimus in later series such as Transformers: Prime. Optimus has been voiced by a number of other voice actors in other series such as Neil Kaplan, Garry Chalk, and David Kaye in the series Transformers: Robots in Disguise, Unicron Trilogy, and Transformers Animated, respectively.
The original Optimus Prime toy started life as the Diaclone toy, "Battle Convoy", created by a team of Takara designers who came on board when the original designer fell behind. This team included Hiroyuki Obara (listed as the sole creator on the toy's patent) and famed mecha designer Shōji Kawamori. The toy transforms into two major components; the first component being a red and blue White Freightliner WFT-8664T cabover semi-trailer truck partially composed of die-cast metal, and the second component being a large silver trailer of currently-undetermined model.
×