In a later scene, Hot Rod fled the city with Kup and the Dinobots when Galvatron, a recreated Megatron, attacked the city again, this time only smaller, after being reformatted by Unicron and taking revenge on Starscream. After meeting up with the other Autobots after a series of adventures on the planets Quintessa and Junk, Hot Rod returned to the other Autobots and rushed to Cybertron to save it from being eaten by Unicron. Facing Galvatron inside Unicron's body, Hot Rod was able to get his hands on the Autobot Matrix of Leadership in the confrontation, as the voice of Optimus Prime was heard saying, "Arise, Rodimus Prime". The power of the Matrix reformatted Hot Rod into Rodimus Prime, maturing him, giving him a larger body, deeper voice, and different vehicle mode. It also destroyed Unicron's body, bringing the events of the film to a close with Rodimus Prime as the new Autobot leader.
Like the larger First Edition figure, you can actually separate the robot mode from his vehicle shell, displaying both of his modes at once... albeit unlike the First Edition figure, this tweak could sacrifice the even stability between those two separated figures. Some of the pieces like the legs/rear wheels are particularly difficult to separate.
Rodimus also appeared in the Dreamwave Energon Comic. In this continuity Rodimus's history in unclear, but he seems to be a veteran Autobot assigned to Earth. He acts as a mentor to many of the less experienced Autobots: for example he was the first to congratulate Ironhide when he overcame his fears to defeat Tidal Wave. He was one of the defenders of Toronto alongside Hot Shot, Red Alert, Hoist, Beachcomber and Thrust, battling against Divebomb and a swarm of Terrorcon clones before receiving help from a very unlikely source - Megatron, resurrected in a new body by Optimus Prime. The subsequent counterattack routed the Terrorcons.
In time-honored tradition, Prime's instructions depict the toy with an alternate "pretooled" head – in this case, a version with the faceplate deployed, used on the Platinum Edition and "Rusty" releases of the figure (see below). Additionally, his packaging stock photography depicts him with extra white/silver paint details, especially on his chest and wheel rims, as well as having gray upper arms with red details, among other differences.
Came with the Mini-Con Sparkplug. Could combine with Armada Jetfire (and its repaints) and/or Armada Overload (and its repaints). The trailer could convert into a base for Mini-Cons. In Japan a gold chrome edition of this toy was released as a Lucky Draw special. With its trailer the vehicle mode of this toy bears a great resemblance to G1 Star Convoy. According to the Armada video game Armada Optimus Prime is supposed to be 22 feet 10 inches tall (696 cm tall) and the toy is 17.5 cm tall. So that's a scale of 1:40.[55]

In the first nexus, when Swoop reported back to Autobot HQ that the other Dinobots were being controlled by Bombshell's cerebro-shells, Optimus had to decide whether to stop them with an immediate full-scale assault, or consult the Ark's computer. If he led an immediate attack, the cerebro-shells were jolted loose when his troops carried out his order to, "Bring them down fast and hard". If he consulted the computer, he then had to choose between its plan to have Windcharger remove the shells from a distance with his magnetic powers, or go with Mirage's idea to lure the Dinobots over Bandit's Bluff with an Optimus Prime hologram. If he chose Mirage's plan, the Dinobots charged over the cliff and into the ocean, where they were salvaged for repairs back at base. If he let Windcharger lead operations at the bluff so he could confer with Skids about some strange activity near Dolphin's Bay, it was out of his hands whether Windcharger accidentally tore the Dinobots to bits, or harmlessly removed the cerebro-shells. The latter outcome led to Grimlock telling Optimus that Bombshell said controlling them was just part of a larger plan, and the Autobot leader realized that it might tie in to Skids's report. Skids and Bumblebee could investigate in Wheeljack's new mini-sub, but should he send Sludge along with them?


The main torso-bot is based on Generation 1 Optimus's original body. Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). Another is based on live-action Optimus (Soundwave helmet), and the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
In the Escalation miniseries, Megatron engages Prime and, boosted by Ore-13, overcomes him. Believing their leader dead, the rest of the Autobots attempt to buy the newly arrived Hot Rod time to collect the clone. Prime, who had transferred his consciousness to a backup memory in his trailer command post, advised them to exploit Ore-13's weakness and assault Megatron all-out, catalyzing the Decepticon leader's Energon supply and crippling him.

This Japanese e-Hobby exclusive is a redeco of Targetmaster Kup, made to represent the character Orion Pax from the cartoon episode War Dawn. He transforms into a Cybertronic pickup-truck thing. His truck bed has a peg-hole to mount his partner Barrelroller, who also serves as a hand-held weapon. The set also came with a re-deco of Wheelie as Dion.
After weeks of Decepticon silence, Optimus Prime decided to get proactive and sent out patrols all over the planet to try and flush the villains out. None of the patrols reported back with any success, however, and Prime realized that there was one area of the planet that his troops had deliberately ignored: the mysterious "Nebulos Triangle". Quickswitch, Scoop and Quickmix were sent into the Triangle, and they did indeed discover and foil the Decepticon plot going on in the area. Decepticons Underground
Get ready to turn heads with TRANSFORMERS MIGHTY MUGGS Figures. Call it a moodswing, or call it a moodSPIN, these TRANSFORMERS MIGHTY MUGGS figures feature a push-and-turn mechanism that lets fans change the figure’s facial expression by pushing down on the head. With 3 different expressions and classic character designs, these figures will have fans doing a triple take. Characters include BUMBLEBEE, OPTIMUS PRIME, MEGATRON and more. Each sold separately. Available at most major retailers and on HasbroToyShop.com.
After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.

The 5-inch Power series is a little more complex (4-9 steps) and a little more spoilery, because it’s the first hint we’ve gotten that Megatron might be a part of the Transformers: Bumblebee movie. Sporting a similar form to previous versions, his alt mode is a 4-track Cybertronian tank (with the usual very conspicuous face…funny how a lazy toy design decision from the first movie has now become cannon). The Power series also has the only Dropkick Energon Igniters toy. You can use the cores sold with the Power Plus and Nitro toys to unlock special features. Camaro ‘Bee and Hot Rod round out this series.

Optimus Prime also appears in Transformers: Rescue Bots, stated to take place in the same universe as Prime, as the leader of the Autobots who transforms into a semi-trailer truck, though unlike his Prime appearance, it's flatnosed like his G1 counterpart. He gave the Rescue Bots their mission and mainly appears mainly via view-screen, appearing physically in the first episode and then in the first-season finale, where his truck mode is seen for the first time on screen. He then returns, with or without Bumblebee, many times throughout the second and third seasons as a recurring character. In the episode "Land Before Prime," Optimus Prime arrives on Wayward Island to help the Rescue Bots. He scans Trex as a secondary form where gains a Tyrannosaurus form, making him a Triple Changer, though he states that scanning anything techno-organic might have unpredictable results. While he loses control of this "Primal Mode" at first, the Rescue Bots determine that his loss of control is due to low Energon reserves, and are able to replenish his energies and restore him to normal using an energon patch. At the conclusion of the third season, Optimus helps his old friend, High Tide, along with the new recruits, Blurr and Salvage, save Griffin Rock and subsequently sends Heatwave and his team on a new mission to use the island as "testing place" to reveal their true identities as aliens.
In 2002, 3H secured the official Transformers convention license as well as licenses to produce comic books and start a fan club. Optimus Prime appeared in Transformers Collectors Club comics, a comic released by 3H enterprises. In the comic, he is the same Optimus Prime from the Robots in Disguise continuity, but is taken to the Transformers: Universe reality.

Part of the first wave of the Combiner Force assortment, Optimus is a roughly Scout-class sized figure that changes from his futuristic truck with a combiner chest that doubles as his spoiler into a robot in three four extremely simple steps. His individual robot mode only has limited articulation on his shoulders. He also has a little green arrow above the connector on the truck bumper indicating where to crash him to combine with other figures. A 5mm post hole on top of his vehicle mode can accommodate a compatible accessory or Weaponizer Minicon, though he cannot use it in his individual robot mode.
It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.
In the United States, Canada, and Hasbro's Asian markets, Masterpiece Movie Series Optimus Prime was exclusively available from Toys"R"Us, whereas in Spain, he saw a wider release, being at least available via the Spanish subsidiaries of Amazon and Carrefour. It's currently unknown if he was also available in stores, or limited to online purchases. In Greece, he was officially available via at least one toy store chain, aptly named simply "Toys-Shop", but again might have been available online only.
The Beast Wars were waged on prehistoric Earth, eventually leading to the discovery of the buried Ark. The beast Megatron, following the original Megatron's instructions in a desperate gambit, attempted to change history by killing Optimus Prime, who was still lying in The Ark in stasis lock. Megatron hoped that this would result in the Decepticons winning The Great War and the eventual rule of Cybertron by the Predacons, the descendants of the Decepticons. Megatron unleashed a full-power weapon blast at Optimus Prime's face, delivering a near fatal blow. Optimus Primal, however, took Prime's spark into his body to protect it from surgical trauma while his injuries were repaired. The subsequent power increase caused by Prime's spark's connection to the Matrix augmented Primal into the large, transmetal "Optimal Optimus" form with three alternate modes (jet, land vehicle, and transmetal gorilla). Then, with the repairs complete, Prime's spark was restored, and he briefly activated before sinking back into normal stasis.

A perfect example of why I dislike modern Transformers more and more. I'm 22, and when I was younger Transformers were my favorite thing. I still have many of the ones I had back then. But nowadays I'll go to Target or Toys R Us (RIP) and see what Hasbro has been up to, and they're bragging about how this Transformer only takes 5 steps to transform!
This figure was only available in a two-pack with a Voyager Class Grimlock figure. The two-pack was exclusively available at Target stores in the United States, Canada and Australia, at Tesco stores in the United Kingdom and Hungary and at Galeria Kaufhof department stores in Germany. In Asia, most of the remaining stock are available in some hobby shops and some video stores like Speedy Video.

During the Cybertronian Civil War, Sentinel Prime was killed. Prior to his destruction, he bestowed the Matrix of Leadership to Optimus Prime, who became the new leader of the Autobots. Despite being one of the youngest Cybertronian leaders, Optimus demonstrated extraordinary courage and wisdom in the war against the Decepticons. He: treated all lives with benevolence, fought for freedom and peace, and continues to fight to protect the weak and maintain their beliefs.
Optimus Primal, leader of the Maximal faction in the Beast Wars animated series and toy line, is not Optimus Prime. Primal is one of the Maximal descendants of the Autobots, who took the name to honor Optimus Prime. The same applies to the Megatron of this era. Before the animated series began, Hasbro envisioned Prime and Megatron as their beast counterparts, but once the animated series began, this had already been changed. Design elements, such as Prime's mouth-plate slitted to add an actual mouth for the animated series and the first mini-comic that came packaged with the toys, suggest this. Nonetheless, Optimus Prime and Megatron were a major reason the Beast Wars began, as Megatron's Predacon namesake traveled back in time seeking to alter history and insure that the Decepticons triumphed over the Autobots.
This playset is a variation of Optimus Prime's dinosaur mode, but as a figure-8 racetrack. A launcher can propel Flip Racers through the track where they can activate a popup Chase and land in a jail. The Flip Racer MorBot is included but any Flip Racer is compatible. The raceway can be extended by attaching the Flip Racers launchers: Bumblebee’s Quick Launch Garage or Airport Blastoff Blades (sold separately).
He made it out of the building and ran into the real Sunstreaker, who blasted the 2 clones following Hot Rod. Sunstreaker ignored Hot Rod's warning about Scorponok's army and stormed into the building so Hot Rod painfully wired himself to send a distress signal. When Sunstreaker's real head was later disabled by Hunter, the Headmaster clones shut down, which Hot Rod explained to Grimlock. The group was surprised by the arrival of Shockwave, but Ultra Magnus had heard Hot Rod's distress call and was on his way to Earth. After Scorponok knocked out Sludge and Grimlock tended to him, the remaining Dynobots offered Hot Rod a lift aboard the Monsterbots' ship. He refused though, and made it back into Machination HQ to take care of something "personal". He eventually found Scorponok's real head. Hunter also showed up and let Hot Rod know how to disable it, but before he could do so, Scorponok grabbed him. Before Scorponok could crush Hot Rod's head, the Dynobots showed up and began to battle Scorponok. Hot Rod told Swoop which wires to sever, and he did just that, reducing Scorponok to a catatonic state. Ultra Magnus arrived took everyone back aboard his ship, which later docked with the Ark-32. Within 3 days, Hot Rod was fully repaired, with a new body form design.
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.

Over twenty-plus years, there have been a bajillion releases of this mold, some identical to the original toy, and some featuring significant variants with notably different paint jobs, color schemes, accessories and other pack-ins. We have striven to list all these variants on this page under their respective series; for a quick-reference list of all variants and releases check here. The cab robot has also been used sparingly to represent different characters; outfitted with different trailers, it has become Generation 1 Ultra Magnus and Pepsi Convoy.
×