As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".
Optimus Prime has a wide range of articulation for a relatively bulky figure. He has ratcheting joints in his shoulders, elbows, hips and knees, with swivel joints and ball joints supporting them in his biceps, lower knee joints and ankles. Again, unusually for a mainline figure, especially at the Leader pricepoint, his hands have individually articulated fingers and thumbs, but no wrists.
We say "intended", because in actuality, the thing appears to have been produced in such huge quantities that it's wound up being made available in loads of other places—it was handed out at San Diego Comic-Con 2011, offered as a free giveaway with any order that included Transformers toys on Hasbro Toy Shop), as a free gift on the cover of the Awesome Autobots Activity Book, and came as a free gift attached to, of all things, issue #240 of the UK children's comic, Doctor Who Adventures (but not the UK's Transformers comic, you'll note!).
In Transformers: Armada and Transformers: Energon, Optimus Prime shares the role of main protagonist with Rad, Alexis, Carlos, Starscream and Hot Shot. The Optimus of this universe shares many similarities with his parallel universe versions, including nobility of spirit and a strong desire to protect all humans on Earth. In this continuity, the two sides are not looking for energon, but a small race of power-enhancing Transformers known as Mini-Cons. Optimus led his small band of Autobots to stop Megatron from acquiring their power for himself.
Alternatively, the Autobots could concoct a plan where Optimus would pretend to allow himself to be taken prisoner, per Buddy’s suggestion. The Decepticons, fooled into thinking they’ve won, took Optimus Prime into their base. Having hidden his troops inside his trailer, Optimus and the Autobots then led a surprise attack on their unsuspecting foes.
The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
In Transformers: Alliance, Optimus Prime and the Autobots aid the human soldiers after the battle in Mission City and destroy the Allspark-powered machines that were created. A trailer is obtained for Optimus Prime to carry the remains of Jazz. The Autobots leave Mission City as the Sector 7 personnel arrive to claim the remains of the Decepticons. About a month later, Epps and Lennox contact Optimus Prime about aiding them in escorting the remains of the Decepticons to the naval yard. They are spied on by Barricade, who transmitts the information to Starscream.
"Cybertron Optimus Prime" new features a darker grey plastic, and mostly shares the same paint mask to the original Deluxe class figure, with added paint details on his head and the mesh-like pattern on the front of his "entry" mode. The silver paint on his chest was slightly changed from the original and he lacks the paint on his feet, his "headlights", and the top of his "entry" mode. Lastly, he features Cyberglyphics on his vehicle mode windows, and the rear sides of the vehicle. His flame attachment is now cast in translucent red plastic with orange sprays.

The main selling point of the toy is the ability of the truck cab to combine with the trailer to form Super Optimus Prime. The cab portion folded in half and sat in the chest cavity of the trailer's torso, giving him the classic Optimus Prime truck-chest appearance. The two double-barreled cannons were attached to his shoulders and a large, separate head piece was mounted onto the hole on top of the truck cab.

This sculpt was redecoed from the Generation 2 Gobot Firecracker. The plastic colors are a "solid" version of Firecracker's color layout, substituting opaque red for transparent red plastic. It was redecoed again for the third wave of Go-Bots to become Sideswipe (who Prime really looks a lot like), and would later be used to created Robots in Disguise R.E.V..
A Supreme sized version of Optimus Prime, based on the Voyager class figure design.[153] When pushed forward, the upper torso spins and transforms, with the transformation sound indicating the completion of the process. The right arm has an axe-swinging action while the left arm has a punching action. Includes show-accurate battle axe that features retractable blades and a spinning jet flame. Also features sound effects and pre-recorded dialogue ("My name is Optimus Prime!", "Let's go!" and "Bring it on!"), as voiced by David Kaye.
Not long after his resurrection, Optimus was alerted by Monitorus to an attack on Tau-Ursa. Optimus's impending speech was interrupted by a Decepticon attack led by Sixshot. Prime soon discovered that the attack was a diversion, while Galvatron tried out his Nullification Cannon on Cybertron's Energon supplies. Optimus rushed to the Energon plant, but, after clouting Slugslinger so hard that the Decepticon was left dangling over a precipice, Prime's morals forced him to rescue the Decepticon instead of stopping Galvatron from getting away.

Power Surge Optimus Prime's scannable Autobot insignia is on his robot mode left shoulder. As he's packaged in robot mode, this badge is easily scannable while still in-package. Like his wavemate Bumblebee, this figure eventually saw release in the 11th wave of the Warrior Class line with the "Combiner Force" packaging. His scannable sticker is also altered, but scanning the badge only unlocks Energon currency, but not the character. This also applies to the original release's badge, but it unlocks 8 Ultra Sparks instead.


Bumblebee may be beloved, but so is Optimus Prime and writers have seemingly killed off Optimus a million times in different continuities. So it can’t be too much of a surprise to know that Bee has met his maker on a few occasions as well. In the “Dark Cybertron” storyline of the IDW Generation 1 continuity, Decepticon Shockwave goes mad with power and wants to destroy all Autobots and Decepticons. In the process, Shockwave kills Bumblebee and sets off a chain of events that leads to retribution against Shockwave.
The character of Optimus Prime first appears in Transformers (film) as the leader of the Autobots in the search for the Allspark. After arriving and scanning a Peterbilt truck, Optimus greeted Sam Witwicky and Mikaela Banes, introducing his men and explaining why they had come to Earth. They escorted the humans back to Sam's house to retrieve the pair of glasses that would lead them the Allspark. When Sam and Mikaela were captured by a Sector 7 agent named Simmons, Optimus intercepted their car and surrounded the Sector 7 agents, curious that Simmons was not afraid or surprised by their appearance. When backup arrived, Optimus took the teens on his back and ran, taking cover under a bridge. Though Sam, Mikaela, and Bumblebee were captured, Optimus retrieved the glasses and prepared to lead his other men to get the Allspark, pointing out that, if it came to it, he would sacrifice himself by shoving the cube into his chest to prevent he Decepticons from getting control of the Allspark. When they discovered Bumblebee and the humans were free and being escorted by the military with the Allspark, Optimus joined their convoy. Along the way they, are attacked by Bonecrusher. Optimus engages him, killing him by using his Energon blade. Arriving in the city, he briefly confronted Megatron, but was left stunned. When he recovered, he rescued Sam as he was falling from a building and warned him that if he could not defeat Megatron before going into battle, he needed to place the Allspark in his chest. Optimus is nearly defeated by Megatron before Sam kills the Decepticon by ramming the Allspark into his chest. Optimus is grateful to Sam for saving him, and he and the other surviving Autobots decide to remain on Earth since Cybertron cannot be restored without the cube. The film ends with Optimus sending out a deep-space signal, inviting other Autobots to join them on Earth.
For accessories, he comes with (according to his bio) "the ancient weapons of the Primes", such as his Nexus Sword (a reference to Nexus Prime), the Vector Shield (an upscaled, non-transforming version of the shield from his Cyberverse "Beast Blade" toy, and a reference to Vector Prime), as well as a generic cannon with a pressure-fired missile. All of his accessories can peg into his hands, right forearm, backside, and vehicle sides.

Upon witnessing the incredible power of a lightning storm for the first time, Optimus Prime had Sparkplug Witwicky explain the phenomenon to him. Intrigued by the potential of lightning, Prime put Huffer and Gears to work finding a way to harness its energy, so they could use it to aid in the rebuilding of their spaceship. Huffer constructed a giant lightning rod, and Optimus Prime and the Autobots gathered to watch its first test. They were shocked, however, when a fleet of battered, damaged Decepticons flew out of the mountain housing the antenna and off into the night. The evil robots had attempted to discover the device's secrets and been seriously electrocuted! Once the lightning rod had been checked, Prime vowed to make the lightning-harnessing technology the Autobots' gift to Earth once they had left the planet. Autobots' Lightning Strike


If instead of all heading into the lab together, the Autobots had sent in Bumblebee alone, and Bumblebee subsequently managed to escape with the antidote to the Decepticons’ poison, the Autobots escaped from the Valley of Poison and returned to Autobot headquarters. Once the other Autobots were cured, they all drank a toast to Bumblebee, to celebrate his part in the mission Decepticon Poison
This highly accurate model kit of Optimus Prime is a Japanese exclusive. It is extremely possible, and comes with his two swords that can be mounted either on his fore-arm, or the hand can be removed and it placed in the wrist via ball joint. His appearance is based on his Dark of the Moon look, as it his "Abbs". The head can be made either with the face-plate on or the face-plate of which reveals a detailed face. Interestingly though, he doesn't come with any of the guns he uses in the films, though it is thought he can hold Buster Prime's gun.

Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.[61]
Another version of Prime was also available in the second wave of the Smallest Transforming Transformers series as a chase figure. This almost entirely white version of the figure is clearly based on the version of the original Prime cab robot used in the Generation 1 Ultra Magnus figure, but was nonetheless sold as Optimus Prime for the Smallest line.
Optimus Prime has appeared in numerous video games since the introduction of the Transformers series. He makes a cameo in the 1999 Beast Wars Transmetals video game for Nintendo 64, where he is killed by Megatron at the end of the campaign, showing what would have happened in the Beast Wars series with a Predacon victory. Prime is also one of the playable characters in the 2003 Japan-only Transformers game for the PlayStation 2 and the 2010 Transformers: War for Cybertron. Optimus Prime is also playable in the Hasbro Net Jet Transformers fighting game Transformers Battle Universe. Three versions of Optimus Prime are playable characters, including the first generation incarnation, his incarnations from the 2007 live-action film, and the incarnation from Transformers Animated. In this game, Optimus Primal is also a playable character. He is a regular character in the Nintendo GameCube and PlayStation 2 2003 fighting game DreamMix TV World Fighters. He appeared as a boss in a simple Flash-based video game on the Hasbro web site.[25]
This Japanese-exclusive vacuum metalized golden redeco of Super Base Optimus Prime, whose name means "Shining Golden", was available as a prize in several draws, including a colouring contest held in the pages of TV Boy magazine, and in-store lottery draws at Tobu Department Stores. Between the draws, at least 58 "Kinpika" Prime toys are known to have been given away, making it one of the more widely available Lucky Draw figures, comparatively speaking. It came packaged in a plain white box, and including all the accessories and features of the standard release of the figure, including a gold-chromed Sparkplug (or "Prime", as he's confusingly known in Japan).
Shortly after reaching the other shore and taking out Skywarp, Prime witnessed the gigantic Bruticus bust out of the Terrordrome and attack everything around him. With Superion gone, Prime knew that there was only one way to stop this rampaging monster, and ordered his Autobots to evacuate the humans while he went looking for the Matrix of Leadership. He soon found that Snake-Eyes was in possession of the artifact, but was under attack from Megatron. Prime attacked Megatron, keeping him at bay while telling Snake-Eyes that destroying the Matrix would kill Bruticus. The ninja complied, only to learn that Optimus had left something out of the story: smashing the Matrix would kill all the Transformers, including Prime himself. Looking at the Autobot leader's body, the Joes knew that Prime had been aware of this, and had deemed it a necessary sacrifice to save the humans. The Iron Fist
Categories: Art FeatherAstronBeelzeboss StudioBTS ToysCHMSDaCa ToysDMY StudiosDr. WuDream FactoryFansProjectFansToysGeneration ToyHeadrobotsHeerotoysmakerIGearImpossible ToysJunkion BlacksmithJustIToysKaziKOLDMaiden JapanMaketoysMastermind CreationsMasterShooter CollectiblesMech IDeasMGSPerfect EffectPlanet XPlay With This TooRenderformReprolabelsToyworldTransformersTFC ToysWarbotronX-TransbotsXovergenYom-GZenith Forge
Menasor cut off Prime's escape and handed him the Reflector trio, who confronted Prime with a hologram of Serpent O.R. The new Decepticon leader carried Megatron's memories and information downloaded from Soundwave, from which he learned of the Matrix of Leadership. Serpent O.R. offered Optimus a trade: hostages and peace if he handed over the Matrix. Optimus agreed.

Available exclusively at Hasbro Toy Shop and their booth at San Diego Comic-Con 2011, this version of Ultimate Optimus Prime is presented in vehicle mode, packaged into a large, foil-embossed bubble packaging (similar to late Alternators packaging) styled after Optimus Prime's trailer, with an additional foil-embossed sleeve styled after the hood of Optimus Prime's truck. Exclusive to this release is a set of stickers one can apply to the trailer. The toy itself is otherwise identical to the regular retail release.
The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco from Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode, he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.
With the data from the piece price evaluations I was able to also evaluate the average size of LEGO sets each year. As you can see on the chart below, the average size of sets released each year stayed somewhat constant from 1980-1990 until around 2000 which set sizes started to increase. The average set size seems to have peaked in 2008 (which saw the release of the Taj Mahal), but since then it hasn’t fallen to its pre-2000 levels. It seems to have found a new normal around 300 pieces.
A BotCon 2012 exclusive purple redeco of the Deluxe "Generation 2" Optimus Prime figure from the Generations toy line, with the sword's blade molded in clear yellow. Much like the 2008 Voyager figure, this figure has painted-in "battle damage" effects. The right side of the hood has the words, "I shall stand...", while the left side says, "The rest shall fall."
This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.
The San Diego Comic-Con 2017 exclusive Optimus Prime figure is another redeco of the Premier Edition figure, which aims for a more movie accurate look than the original by still sharing the same paint masks, but replacing the chest's deco with flames and adding extra paint applications on the legs, arms, chest, head, tire rims, both sides of the engine compartment, and the sword and shield... but for some reason still sports the movie-inaccurate blue 'collar', as well as the smaller, less accurate vehicle flame tampographs instead of the more movie-accurate ones used on Dark Optimus Prime. His Autobot insignia is also moved on the upper back section of the air dam. He is packaged in a stylish, display-case-like-box similar to later Transformers: Alternators releases and the Hasbro Toy Shop/SDCC 2011 exclusive figure.
Although peacetime in the decade that followed the apparent deaths of Unicron and Galvatron afforded Prime the opportunity to train his own elite squadron of Autobots the martial art of Kumite. The re-emergence of the war, however, forced him to return to his role as commander. The conflict for control of the Mini-Cons and the truths he was forced to face in his confrontation with Unicron seems to have changed him. Optimus Prime, Grand Convoy' in the Japanese version, was now a stern, more direct commander and shows little of the conflict that held him back before. Despite this, he is still known to make the same kind of decisions, which include an emphasis on team work and the foundation of the Autobot values.

The Optimus Prime Kreon in this set is based on the character's rusty, crusty "evasion mode" from the Age of Extinction movie. He has a ferrous-metal backpack, which is used to interact with the magnetic parts in the various sets. In this specific set's case, it's so he can be grabbed by the buildable Strafe's dino-claws, once Strafe uses said claws to open up the "laser" cage made to contain Optimus. (Yeah, we know Strafe appears way after Optimus ditched this look in the movie.)


Power of the Primes "Evolution Optimus Prime" transforms from a truck with a trailer into a robot and back. The individual truck transforms into his "Orion Pax" form based on his appearance in the Generation 1 episode "War Dawn", and he is able to form the core of Optimus Prime's robot mode. His trailer forms Prime's entire body, and his ion blaster can be split into two weapons. He includes the Matrix of Leadership, which can store in his chest in the 'Evolved' form. The center of his Matrix of Leadership can be replaced with any Prime Master. In an undocumented feature, his rifle can be stored on his back as Optimus Prime by pegging it into Orion Pax's hands.The Takara version of the mold lacks the production numbers located at his right shins. Depending on the individual copy, Optimus Prime is prone to having a number of quality control issues: ranging from two left/right arms and/or legs/feet on the evolution armor, to lacking stickers on the trailer pieces.


Optimus foiled Megatron's attack on 21st century Tokyo after informing his old foe that wherever he would pop up, the Autobots would be there to thwart his evil intentions. Henkei! Henkei! volume 1 Optimus and Bumblebee later intervened when Astrotrain attacked Shinjuku Station, using their bodies to shield nearby humans from the destruction the triple-changer brought about. They were unaware that Astrotrain's rampage was really a distraction staged to keep their attention away from Megatron's gathering of energon cubes nearby. Henkei! Henkei! volume 2 Optimus continued to do battle against Astrotrain until Rodimus showed up to provide the Autobots with additional firepower. Henkei! Henkei! volume 3

With the failure of the Generation 2 series, Hasbro and Takara decided the franchise needed an overhaul. They went in a new direction and a new beginning. While there had been Transformers that change into robotic animals, the premise of the new line was that all figures would transform into animals with realistic appearances. The Beast Wars toy line was launched in the autumn of 1995, and Mainframe Entertainment produced a computer-generated imagery, or CGI, animated series program to tie in with the new toy line. A fresh idea coupled with a TV series program with strong stories assured this series the success Hasbro and Takara needed, as this series was a giant hit in international markets as well as in Takara's home market, Japan.
Sure enough, in 2009, when the Hytherion's colossal claw-marks appeared on planets throughout the solar system, Prime's other-dimensional incarnation returned, bringing with him a "Vibrant Red" Vector 109 auto-avatar with which Prime fused. In that instant, he was reborn as part of the Alternity, a manifold being who encompassed all the different incarnations of Optimus Prime through the multiverse at once. Prime reached his hands heavenward and peeled back the layers of reality, exposing the gargantuan fanged maw of the Hytherion looming above the Autobots. From Here to Alternity

He comes with a fully transforming and highly detailed trailer that opens up into his Combat Deck/repair bay, with a functioning repair drone and Roller, who features four-wheel steering. His other accessories include a teeeny Matrix inside his chest compartment, his ion blaster (with adjustable grip), his energy axe, Sideswipe's jet pack, and several different hands, all of which can be stored in individual compartments within the trailer.


A retool of Crash Combiner Optimus Prime available in a two-pack with Grimlock, featuring a new Optimus Prime-ish Combiner head and new arm parts with a green dinosaur-themed front shoulder pads, and he features a lighter shade of red plastic. Like the previous versions, Optimus Prime can become the top half of any Crash Combiner gestalt, though his official combination is with Grimlock as Primelock.
Though he was packaged on an individual box, he was initially sold as part of a set with Dark Energon Megatron. He was eventually made available on his own, and all of the Dark Energon Series toys were eventually made available in Singapore as mass-retail releases. The Voyager Class toys, in particular, also saw mass-retail release in the Philippines.
Punch reported back to Optimus on what he had learned about the Decepticons as Counterpunch. Mainly, that they were planning on attending BotCon 2010. Optimus then turned to Teletraan I for more information about BotCon. Upon learning that special honors would be held for him at the convention, Optimus led his troops to BotCon once more. BotCon 2010 Promo
A redeco of the Generation 2 Go-Bot Firecracker, Go-Bots Optimus Prime transforms into a red Hot Wheels-sized Lamborghini Diablo. Like all Go-Bots, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly. He is armed with a small red laser rifle. The plastic colors are a "solid" version of Firecracker's color layout, substituting opaque red for transparent red plastic.
Inspired by a 1985 special limited release of Optimus Prime with bonus Pepsi decals for his trailer in the US market, Pepsi Optimus Prime sports an egregious number of new new Pepsi-themed paint masks and decals, as well as an entirely new trailer unit, specially designed to carry a single 500ml-size bottle (a common size in Japan), three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan).
In robot mode he resembles previous Optimus characters: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.

On a version of Cybertron where Energon shortages have left many of the surviving Autobots and Decepticons all-but immobile, Hot Rod opted to be converted into a smaller and more efficient Micromaster, and thus retained his mobility. Detesting the corrupt system that has fallen into place, Hot Rod seeks to reform Cybertronian society from within the established government, while his former comrade Grimlock joined the resistance in an effort to bring down the old order. Feeling this approach to be no better than Megatron's rebellion that triggered the Great War, Hot Rod opposed Grimlock's efforts, particularly when his plans came to include using the G-Virus to turn a large number of "Builders" into immobile clones of Galvatron, unaware that the effects would also spread to a number of Maximals, Predacons, and Micromasters. Fortunately, Grimlock was betrayed by one of his own men, who destroyed most of the virus, though not before one Cybertronian was infected.
Optimus took the mantle of leadership as the civil war against the Decepticons erupted, and would remain in that position for the next nine million years. Ariel was rebuilt into Elita One, the commander of the Autobot resistance on Cybertron. The fate of Dion is left unrevealed. It has been speculated by fans that Dion might have become Ironhide or Ultra Magnus just as Orion and Ariel became Optimus and Elita, but this remains fan speculation only, and, his close friendship with Optimus notwithstanding, there is no evidence to support the idea.
Optimus and Wheeljack returned to Autobot HQ after an absence to find Grimlock had taken leadership. Though they failed to resist him, he soon bored with leading the Autobots and let Optimus take command again. Me, Grimlock, King Impressed with Bumblebee's success as team leader, Optimus assigned Pipes to lead a team. The B-Team Part Deux With Optimus badly damaged and without the Matrix, the Autobots were driven off Earth and sought refuge on Cybertron. Once Optimus had recovered, he put together a team which returned to Earth and retook it from the Decepticons, with Optimus badly damaging Megatron in combat. All Hail Megatron

Part of the third wave of 2012-onwards Generations Legends Class toys, Thrilling 30 Optimus Prime is a new mold that is roughly the same size as a Cyberverse Commander Class toy. Both his truck and robot mode are based on his Don Figueroa-designed body from IDW's ongoing series, and features 5mm-compatible hands and roof. He comes with an Ion Blaster which has both 5mm and 3mm posts.
Optimus was checking up on the Autobots' ongoing energy collecting campaign when Wheeljack informed him that a disturbance in Sector 33HM of space-time would eventually cause major problems in its time-stream. Optimus assigned the investigation of this disturbance to Bumblebee, then noted that Hot Rodimus had not completed his latest report, communications with the young Autobo having been lost while he was on his own mission. With a brief inspirational speech, he urged his subordinates to redouble their efforts in maintaining harmony throughout reality. Little did Optimus suspect that in his own universe, Megatron was planning a coup against the Autobots... Uprising

There is also a smaller "Legends of Cybertron" Micro sized version of this Optimus Prime, without a trailer, and a Burger King Kid's Meal toy, again without a trailer. There is also a rotating sucker holder version of Cybertron Optimus Prime. Later releases of the Leader class and Micro class Optimus Prime were repainted in darker colors, supposedly representing Optimus Prime after the television story. This toy is called Galaxy Force Optimus Prime. A special metallic painted version of this toy was included with Megalo COnvoy in Japan.


Optimus and Prowl secretly guarded a shipment of microchips that could be used to imbue sentience onto robots. Posing as the lorry transporting the precious cargo across the Yorkshire Dales, he was attacked by Megatron and Rumble who sought the microchips to create an army of Decepticons. With your help, Optimus may or may not have been successful in keeping the microchips out of the Decepticons' hands. Highway Clash
The set also includes a redeco of Generations War for Cybertron Optimus Prime figure, which changes the original figure's dark red plastic to a brighter, more vibrant red, changes the gray plastic to a darker charcoal tone, changes the "windows" from gray to nearly black, and replaces most of the original figure's pink-ish red paint details (which were yellow on the redeco from the "Rage over Cybertron" three-pack) to teal.
Part of the first wave of Prime Series 2 Cyberverse Commander Class toys, Optimus Prime is a smaller-scale toy, and features translucent plastic for his torso so that the toy can be illuminated using the electronic lights featured in the larger playsets. He comes with two translucent "battle cannon" weapons which feature multiple 3mm posts and ports, allowing them to be held by his hands, or store/mount onto numerous ports on his person. Additionally, he features a 5mm port for a trailer hitch.
Doug Smidebush, Lior Keinan , Kelvin Nduka, Thad Standley, Nolan Zak, Adam Franks, Stephen Brown, Loren Roberts, Matt and Nykki Boersma, Tom Morgan, Jack Everitt, John Kovalic, Seiler Hagan, Jess Hart, Will James, Christopher M. Kelly, Roberto L. Vargas, Michele Hall, Chuck Lawton, Ismael Schonhorst, (There are those who call him) Tim, Vladimir Weinstein, Randiman Rogers, Robert Booth, Henry Roenke, Kevin Culp, W. David MacKenzie, Nicholas Richards, John Idlor, Michael Fox, Rob H., Matthew Cody, Dan Callahan, Patrick Kohn, Seth Phillips, Kevin Korpi, Ben MS, Monica, Mark Gonyea, Pharlain Ross, Derick Larson, Furstarter.com

His main gimmick, however, is his quintet of "Firebreath Cyclocannons"—spring-loaded dragon-headed missile launchers mounted on an ornate, rotating circular contraption attached to his back/roof. Turning the handle on top makes the backpack rotate and cycle through each cannon, and pressing the handle's button will trigger and fire whatever cannon is at the top/front. When the cannons are cycled through in robot mode, his eyes and windshield-chest light up, and one can alternatively rotate (but not fire) the cannons and activate his light-up features by pushing down on the fake spiky fenders on his stomach. Out of the package, the handle itself comes detached to allow the rest of the toy to fit.
Optimus Prime was blasted into pieces by Dragon Megatron. Beast Wars Metals #5 Fortunately, his spark remained perfectly intact—in the remains of his Matrix-shaped spark chamber. Megatron was going to destroy Prime's spark, but Cheetor (now in his Transmetal body) saved it. Prime's spark was eventually swallowed by Optimus Primal, who was upgraded into Optimal Optimus by doing so.
Just as Marvel Comics produced a companion comic to the original Transformers toyline that differed from its animated counterpart, so did Dreamwave produce a comic to go along with the Transformers: Armada and Energon lines that owed little to their animated fellows. This incarnation of Optimus Prime, however, is not particularly different from his animated counterpart in personality.[51][52]
Hasbro's original plan for the Beast Wars was to have Optimus Prime, renamed Optimus Primal, and Megatron be reformatted versions of their 1980s selves. This was shown in the toys's Tech Specs, and in the comic packaged with the basic Optimus Primal/Megatron two-pack. Hasbro also wanted the "Mutant Heads" found on all of the deluxe sized first year toys as battle helmets, but Mainframe scrapped the idea as it would have required three animation models for each character instead of two. Another designed feature for the 1995/1996 toys was carried over from Generation 2, transparent "light pipe" eyes. However, most toys had those parts cast in opaque plastic.
Prime suffered a severe, though unfair, defeat when Megatron challenged him to one-on-one combat while imbued with the different abilities of all the Decepticons. Teletraan I, the Ark's computer, discovered the deception in time, and the Autobots were able to drive off the Decepticons. In "Prime Problem", Megatron created a clone of Optimus, which caused confusion with the other Autobots. Windcharger and Spike, however, were able to identify the clone before it led the Autobots into their demise.
But around the mid-’90s, Hasbro let the trademark for a toy named “Bumblebee” lapse. At that point, the Generation 1 Transformers were almost passé, as they focused on the newfangled Beast Wars and Beast Machines lines. In fact the Unicron Trilogy continuity (mid-2000s) character called Hot Shot was originally going to be called Bumblebee, and in fact had a lot of Bee’s personality traits and yellow color, until they realized they couldn’t use the name. Fortunately, they got it back soon after.
A very limited number of Gold Masterpiece Convoy figures were given away in a Lucky Draw contest in Japan. The figure uses the same design as Masterpiece Convoy, but every piece, including the windows and weapons, is cast in a gold color, reminiscent of his electrum coating from the episode The Golden Lagoon. The only exception is the tires, which remain black rubber. It comes packaged in the usual Masterpiece Convoy box, with the only telltale sign being the gold lettering in the "Master Piece" label. It's not clear how many were made, but it is thought to be no more than 10 or 20.[1]

Optimus took the mantle of leadership as the civil war against the Decepticons erupted, and would remain in that position for the next nine million years. Ariel was rebuilt into Elita One, the commander of the Autobot resistance on Cybertron. The fate of Dion is left unrevealed. It has been speculated by fans that Dion might have become Ironhide or Ultra Magnus just as Orion and Ariel became Optimus and Elita, but this remains fan speculation only, and, his close friendship with Optimus notwithstanding, there is no evidence to support the idea.
Another release of the Reveal the Shield Legends Class sculpt. The deco for its initial release is unchanged from the Transformers release from 2012, whereas the tooling is identical to the 2012 release's running change variant, with the retooled hands and a hole on the back of his head/top compatible with Cyberverse 3mm pegs. Bizarrely, the package art is lifted directly from the Generations Legends Class Optimus Prime/Autobot Roller two-pack's packaging, whereas the stock photos depicted on the back of the packaging are taken from Reveal the Shield Optimus Prime's packaging and only slightly altered, advertising a "Reveal the Shield" rubsign gimmick the toy doesn't actually have. Meanwhile, Hasbro's official stock photos provided to online retailers (including an in-packaging photo) depict the toy with the sword that came with the running change variant of the sculpt's 2012 release, even though the actual toy doesn't include the sword.
One more thought: LEGO is a Danish company. The fluctuations in the price of LEGO such as the big bump around 1985-7 in Figures 1 and 2 could be because of a change in exchange rates. The conversion rate between the Danish Kronor and the US$ went from over 10 in 83 and 84 to less than 7 in 86 and 87. LEGO might have been slow to respond to changes in exchange rates, leading to the temporary bump. If you’d like to share data we can redo your graphs in DKK.
This, of course, is all secondary to the main draw of the figure: it pulls an all-white trailer, which transforms into a working iPod speaker dock by rotating a substantial wedge of its full length 90 degrees . The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer. Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor with advice from an electronics specialty shop is recommended.
Originally, the Alternators Dodge Ram mold was intended by Hasbro to be a completely different character altogether than Optimus Prime (which character is unknown), but Takara reportedly demanded the Ram be made into Optimus out of fear that the toy (whose vehicle mode is scarce in Japan as a real vehicle) wouldn't sell as well in their market if it wasn't a popular and easily recognized figure; as the figure reportedly cost twice as much to build as the others, Hasbro had to agree in order for Takara to continue fronting part of the production cost. In an ironic turn of events, the Dodge Ram was prematurely solicited by Takara not as "Convoy" (Optimus Prime), but as his Masterforce look-alike Ginrai. As a matter of fact, the head sculpt for the Alternators Oprimus Prime toy is based on the Super Ginrai (Powermaster Optimus Prime's "super mode") toy's head sculpt. Ultimately, however, Ginrai was cancelled, with only Hasbro releasing Optimus Prime as originally planned. Eventually, Takara released the Dodge Ram as as part of the new Kiss Players line, now named "Convoy" (Optimus Prime), and he will be released in Binaltech this year.
Being a Combiner Wars Voyager, Prime is naturally capable of transforming into a torso mode to combine with any 4 Deluxe Class Combiner Wars-style toys, though his packaging call-out has him form Ultra Prime by combining him with Deluxe Class Skydive and Alpha Bravo as the arms, and with Firefly and Decepticon Drag Strip as the legs. He can combine with Sunstreaker, Mirage, Prowl, and Ironhide if one wishes to have an IDW-accurate Optimus Maximus.
If the Autobots went along with Prowl’s strategy, the resulting heat from the explosion caused the Autobots’ circuits to overheat, rendering them unconscious. Upon reawakening, the Autobots found themselves captives of Megatron, who informed them that their fellow Autobots would soon perish, and that the humans would be conquered by the Decepticons shortly after.
I wish I could FIND more of the toys - for some reason my area is a toy desert and it seems to be hard to find good TFs. Of the ones I've been able to find, my favorites are all CHUGs, because I end up wanting to get things that look closest to G1. (Sorry. I'm old, poor, and sentimental.) I have more luck at thrift stores than I do at mainstream stores, so I have a ragtag fleet of oddballs with missing parts/untranformables locked into robot mode, etc.
For this re-release of Masterpiece Convoy, Takara submitted to the biggest desire fans had for the figure and produced a full-size, fully transforming plastic and die-cast metal trailer. The trailer opens up into Convoy's Combat Deck, with storage for its accessories and a functional repair drone, though Roller is conspicuous by its absence. Like the original Combat Deck, the drone can extend through holes in the roof and front of the closed trailer, and the interior has enough room to accommodate one Alternators figure in vehicle mode. Some reports suggest that the paint on this figure's chest chips more easily than past editions.
Optimus was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie in 1986. He cost $21.50 and 5 robot points, and came with a special Movie Edition Certificate and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)
Alternators Optimus Prime transforms into an accurate 1:24 scale Dodge Ram SRT-10. The vehicle mode features rubber tires, functional steering, opening hood, tail gate and doors with a detailed cabin interior. Several of the details of his robot mode body are based on the sculpt of the 20th Anniversary Optimus Prime figure, but the head itself shares more similarities with the Powermaster mold. He is armed with a small pistol which transforms into his vehicle mode engine.
This military-colors redeco of the Auto Roller Dirtbag was planned for late Generation 2 and widely solicited alongside fellow redeco Sargent Hound, but never saw release. Transforming into an "earth mover" dump truck, he has an auto-transforming gimmick activated by rolling his rear wheels; roll forward to go to robot mode, and back to dump truck. A switch on his back end separates the gears of the gimmick, allowing him to roll freely in either mode. In vehicle mode, his missiles can peg onto the front end of the dump-bed for storage. In robot mode, he has a twin spring-loaded missile launcher in his right arm, and a clamping "stun gun" claw on the left.

In the Japanese exclusive Transformers: The Headmasters storyline (which replaced the "Rebirth" finale in Japanese continuity), Hot Rod appeared as part of Optimus Prime's inner circle. When Galvatron and his Headmaster warriors launched a devastating attack on Cybertron, Vector Sigma was damaged, and Hot Rod was sent to Earth to retrieve the Matrix. Recovering it, he returned it to Prime, only to be surprised when the ghost of Alpha Trion once again reformatted him into Rodimus Prime to help Optimus. After Prime's second death, Rodimus once again took command of the Autobots. However, when Scorponok destroyed Vector Sigma, Rodimus decided to leave the war, and left Fortress Maximus in command of the Autobots.
Bumblebee may be beloved, but so is Optimus Prime and writers have seemingly killed off Optimus a million times in different continuities. So it can’t be too much of a surprise to know that Bee has met his maker on a few occasions as well. In the “Dark Cybertron” storyline of the IDW Generation 1 continuity, Decepticon Shockwave goes mad with power and wants to destroy all Autobots and Decepticons. In the process, Shockwave kills Bumblebee and sets off a chain of events that leads to retribution against Shockwave.
Honestly, all the charts were done in Excel. I tried other methods but that was the easiest since all my data was in excel already. They are X,Y Scatter plots with sooth lines – heavily tweaked. Made the lines thicker which makes it look smoother and changed the layout a bit to make it clearer. The Excel defaults are ugly but if you spend enough time tweaking them you can get something passable.
If he didn't send Sludge with them, the odds were 2 to 1 that the Autobots would all be destroyed as part of Operation Black Coral. The one possible positive outcome ended with Optimus fighting a duel against Megatron atop Mount Lomas in which Prime (somehow) split into his three components to surround his archenemy. This provoked Rumble into "assisting" his leader with an earthquake that destroyed the Decepticons' entire superfuel operation.
A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.[61]
General Hawk stated in an interview that his typical transportation in Axiom Nexus was his Convoy colleagues. As the seats of General Optimus Prime's vehicle mode were manufactured at the same location as the VAMPs of his universe, Hawk was able to find a degree of familiarity in the strange world of Axiom Nexus. Andromeda - Axiom Nexus News, 2016/05/01
Part of the first wave of Age of Extinction: Generations Leader Class toys, this is yet another completely new "big" Optimus Prime figure. While smaller than the First Edition toy, this one features more silver and chrome paint in vehicle mode, a more poseable robot mode, and a Vector Shield accessory instead of the Sentinel Shield. Unlike the First Edition figure, Leader Class Optimus Prime's pauldrons and hip-skirts are formed from truck kibble, giving him a marginally smaller backpack. His accessories have roughly the same functionality as the First Edition toy, with his sword being hand-held and pegged onto his hands or storing underneath the truck, and his shield mounting onto his left forearm or storing on the back of the truck. Additionally, the sword sheath underneath the truck can be folded up and used in robot mode.
The Decepticons' initial strike came abruptly and brutally, devastating entire districts of Metropolis. Optimus was meeting with Hot Rodimus as this took place, and was nearly overcome with grief when Ratchet informed him of the carnage the Decepticons had wrought. Steeling himself, Optimus coordinated the city's defenses, ordering his troops to be dispatched where they were most needed to repel the invasion. Upon spotting an old enemy on one of the nearby monitors, Optimus geared up to go in the field himself. Arming himself with his favorite pistol, Optimus resolved to take down Megatron. Raid
Part of the first wave of Bot Shots Series 1 launchers, this repaint of Optimus Prime comes with a large trailer that pops open to form a battle station with a spring-loaded launching platform. He appears to have the same plastic colors as the single release, and the same set of paint operations, but his paint is done in different shades, having glossy dark blue paint and glossy bright red paint. The black part of his launcher is sculpted to look vaguely like the repair done that is part of Generation 1 Optimus Prime's repair bay.

Or instead of adding a surface to the package, sell it with its own little plaque / platform. A really thin piece of hard plastic or something that is smooth as well as possibly having a graphic or something printed on it. And then market it as a collectible and only make so many of them. I'm thinking in the price range of $199-$299. I'm not sure the costs going into it, so I can't say.
"Convoy Last Production" was the final re-use of the Masterpiece toy mold before it was at last retired after numerous re-releases and redecos. The figure is essentially identical to the original Japanese MP-1 release, aside from a slightly brighter red, and the addition of the words "LAST SHOT" in Transformers typeface molded into the small of Convoy's back, hidden beneath its headlight-flaps in robot mode. Lacking the trailer of MP-4, the figure instead comes with a redecoed version of the electronic base included with Hasbro's "DVD Edition" of the figure from five years prior, which now features a collection of sixteen soundbytes of Convoy delivering famous lines from the Japanese version of the Generation 1 cartoon, recited by the character's original Japanese voice actor Tesshō Genda. The base was promoted as containing a hint as to the identity of the next Masterpiece toy; as it would turn out, this was a new version of Convoy himself (see below), foreshadowed by a sound clip on the base which played only intermittently, and which had Convoy announce that he would "soon be reborn".
×