Optimus Prime returns in Transformers: The Last Knight, which is set three years after the events of the previous film. Having been frozen in the vacuum of space, Optimus has been drifting on the far reaches of Earth's solar system for some time. However, he later crash-lands on Cybertron, its atmosphere reviving him. He then confronts the being currently in control of the planet, a powerful sorceress named Quintessa, who professes to be the maker he is searching for. Optimus is easily subdued by Quintessa, who convinces him that he destroyed Cybertron and reveals that the Earth is actually Cybertron's "ancient enemy" Unicron. Redubbing him "Nemesis Prime", Quintessa brain-washes Optimus and tasks him with retrieving her stolen staff, with which she plans to drain Earth/Unicron's life force so that Cybertron can be restored. Nemesis succeeds in retrieving the staff, but is hindered by Bumblebee, whom he engages in a fierce duel. Nemesis nearly kills Bumblebee, but when the normally mute Bumblebee suddenly speaks, urging Prime to remember who he is, the sound of his oldest friend's voice is enough for Optimus to return. However, Megatron, revealed to be in league with Quintessa, swoops in and steals the staff from Optimus. Prime is then attacked and sentenced to death by the Guardian Knights for aiding Quintessa, but he is saved by Cade Yeager, who convinces Optimus to correct his mistake. Optimus leads the Autobots in the attack on Quintessa's lair, during which he slays the Infernocons and defeats Megatron. Optimus then attacks Quintessa, distracting her long enough for Bumblebee to shoot and seemingly vaporize her. At the end of the film, Optimus and the other Autobots return to Cybertron, unaware that Quintessa is actually still alive.
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
In the series released by Marvel Comics, before the Great War broke out on Cybertron, the robot who would be Optimus Prime, before he received the Matrix of Leadership from Sentinel Prime, was a Transformer of note, displaying his skills in the Infraformers Sharpshooting Competition. When the war began, Prime quickly made a name for himself as a combat leader of the Autobots.
In one possible sequence of events, Powerglide was captured and reprogrammed by the Decepticons, leading their army to Autobot headquarters. Taken by surprised, the Autobots were felled one by one until only Optimus remained. As Megatron gloated that he would not kill Optimus, only alter him so as to make him the bane of humanity, Optimus activated the Ark’s self-destruct sequence, taking all of the Decepticons with him in a fiery explosion.
The Beast Wars were waged on prehistoric Earth, eventually leading to the discovery of the buried Ark. The beast Megatron, following the original Megatron's instructions in a desperate gambit, attempted to change history by killing Optimus Prime, who was still lying in The Ark in stasis lock. Megatron hoped that this would result in the Decepticons winning The Great War and the eventual rule of Cybertron by the Predacons, the descendants of the Decepticons. Megatron unleashed a full-power weapon blast at Optimus Prime's face, delivering a near fatal blow. Optimus Primal, however, took Prime's spark into his body to protect it from surgical trauma while his injuries were repaired. The subsequent power increase caused by Prime's spark's connection to the Matrix augmented Primal into the large, transmetal "Optimal Optimus" form with three alternate modes (jet, land vehicle, and transmetal gorilla). Then, with the repairs complete, Prime's spark was restored, and he briefly activated before sinking back into normal stasis.
But around the mid-’90s, Hasbro let the trademark for a toy named “Bumblebee” lapse. At that point, the Generation 1 Transformers were almost passé, as they focused on the newfangled Beast Wars and Beast Machines lines. In fact the Unicron Trilogy continuity (mid-2000s) character called Hot Shot was originally going to be called Bumblebee, and in fact had a lot of Bee’s personality traits and yellow color, until they realized they couldn’t use the name. Fortunately, they got it back soon after.
As yet another in an increasingly large number of reissues of the original Generation 1 Optimus Prime toy, this entry in the Japanese-exclusive The Transformers Collection line of reissues added a few extra goodies to spice things up. Chiefly, the figure was armed with a new energon-axe, based on the weapon used by Prime in the Generation 1 cartoon episode, "More than Meets the Eye, Part 2", which plugs into either of the headlight-holes that normally accommodate Prime's fists. Additionally, Prime came packaged with a ring binder folder designed to hold the pull-out character file sheets that were included with all the other Transformers Collection reissues. Notably, this figure reinstated the original, thick version of Prime's rifle as the standard for all future Japanese reissues.

Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.
Honestly, all the charts were done in Excel. I tried other methods but that was the easiest since all my data was in excel already. They are X,Y Scatter plots with sooth lines – heavily tweaked. Made the lines thicker which makes it look smoother and changed the layout a bit to make it clearer. The Excel defaults are ugly but if you spend enough time tweaking them you can get something passable.
Featuring a complex transformation, the front and back ends of the truck essentially fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The halves of the rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his price point, he has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, as it is held in place by a simple clip.) Optimus's final Automorph, located in his torso, is activated by flipping the silver lever on his stomach, activating a series of spring-loaded actions where the truck windows are pushed apart and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point, yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
Produced by the Chupa Chups lollipop company, this small version of Prime is essentially a battery-powered "holder" for lollipops, which fit behind his head and are spun around by a motor that activates when his pelvis is pressed. Prime has articulation in his shoulders, and his fists feature small holes that allow him to hold and store two more lollipops, in addition to the strawberry sucker he comes with. Weirdly, his Matrix compartment is open instead of having the grill front-and-center.
Produced as an action figure by the Japanese company Kaiyodo, the main selling point of the line is the 'Revolver' joint. This gives the figure a high degree of articulation, allowing for many dynamic and varied poses. Hot Rodimus is number 047 in the Yamaguchi series, and comes with extra sets of hands, a pair of pistols, an extra head (which is molded with his binocular vision, as seen in The Transformers: The Movie) and a display stand.
In 2007, following the release of the Matrix's energy, Prime began to suffer from visions which foretold a great transformation for Cybertron. Events began with the Decepticons' theft of the key to the Plasma Energy Chamber, which forced Prime to consult Alpha Trion within Vector Sigma. Prime learned that the mega-computer had orchestrated events in order to restore Cybertron's Golden Age. When the Plasma Energy Chamber was opened and threatened to drive Earth's Sun supernova, Spike Witwicky and the Nebulans, who had become involved in the conflict as a result of these events, were able to drain off the excess solar energy and revitalize Cybertron. With the Decepticons driven off Cybertron and Nebulon free from tyranny, Cybertron enters into a Golden Age of peace and prosperity under the leadership of Optimus Prime and the Autobots.
The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.
Or instead of adding a surface to the package, sell it with its own little plaque / platform. A really thin piece of hard plastic or something that is smooth as well as possibly having a graphic or something printed on it. And then market it as a collectible and only make so many of them. I'm thinking in the price range of $199-$299. I'm not sure the costs going into it, so I can't say.
I suspect that part of the problem with people’s perception of price is also due to changes in tastes as they grow up. A small child will be pleased with relatively small sets, since their lego collection and experience is likely to be almost non-existent. But as they get older, they will tire of the small sets and want ever bigger sets. For adults, most of the fun is in building rather than playing, meaning that size is everything. This means that over their lifetime, the price an individual person (or their parent) pays for lego sets does go up–because the composition of their purchases changes–even though the prices of lego sets over time does not.
Besides the inordinate number of Hogwarts Castles, we can draw similar conclusions from this chart as we can from the Pirate Ship Chart. The prices really have not changed that much in the measurable time-frame2. The weighted average for all the castles is 10.56 cents per piece. As with the Pirate Ships, there does seem to be a general increase in piece count, however.

Hot Rod is often portrayed as energetic, yet brash and headstrong, with an overwhelming self-confidence that borders on arrogance.[1] As Rodimus Prime, leader of the Autobots, he is significantly more mature, physically powerful and instilled with the wisdom of the previous holders of the Matrix of Leadership. In a reversal of his behavior as Hot Rod, Rodimus is plagued by lack of confidence in his role as Autobot commander and often doubts his own decisions, feeling both inferior to and in some ways living in the shadow of the previous leader of the Autobots, Optimus Prime.
Late in 2008, this version of Optimus prime was one of four Classics figures repainted into HasbroToyShop.com exclusives (the other three being the Megatron from this set in G1 colors, Grimlock repainted into Overkill, and Mirage repainted into Dragstrip). Unlike those three, it's debatable just how much repainting went into Optimus, but he comes in a snazzy new box.
Available only via mail-order through Dengeki Hobby magazine, this black and gray redeco of Optimus is one of four "Black Body" promotional Robot Masters toys made available through different outlets simultaneously. He came with his normal accessories (it is worth noting his axe was solid silver), plus a chromed-gold clear-red-plastic version of Psycho-Orb's "Calamity Defenser" solitarium shield.
Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster, a Barrage cannon, two retractable energon blades that extend from his forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, and two retractable energon hooks that extend from his wrists. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.
The Optimus Prime Kreon in this set is based on the character's rusty, crusty "evasion mode" from the Age of Extinction movie. He has a ferrous-metal backpack, which is used to interact with the magnetic parts in the various sets. In this specific set's case, it's so he can be grabbed by the buildable Strafe's dino-claws, once Strafe uses said claws to open up the "laser" cage made to contain Optimus. (Yeah, we know Strafe appears way after Optimus ditched this look in the movie.)
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
Calibur Optimus Prime is a retool of the Armor Knight Optimus Prime figure, who is a retool of the original Age of Extinction Leader Class figure, with the fifth wheel hitch now forming his handheld shield based on the one used in Dark of the Moon, which results in a backpack-less robot mode. He also comes with an axe based on the one used in the third film.

The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.
×