The San Diego Comic-Con 2017 exclusive Optimus Prime figure is another redeco of the Premier Edition figure, which aims for a more movie accurate look than the original by still sharing the same paint masks, but replacing the chest's deco with flames and adding extra paint applications on the legs, arms, chest, head, tire rims, both sides of the engine compartment, and the sword and shield... but for some reason still sports the movie-inaccurate blue 'collar', as well as the smaller, less accurate vehicle flame tampographs instead of the more movie-accurate ones used on Dark Optimus Prime. His Autobot insignia is also moved on the upper back section of the air dam. He is packaged in a stylish, display-case-like-box similar to later Transformers: Alternators releases and the Hasbro Toy Shop/SDCC 2011 exclusive figure.
Minor note: Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.

After weeks of Decepticon silence, Optimus Prime decided to get proactive and sent out patrols all over the planet to try and flush the villains out. None of the patrols reported back with any success, however, and Prime realized that there was one area of the planet that his troops had deliberately ignored: the mysterious "Nebulos Triangle". Quickswitch, Scoop and Quickmix were sent into the Triangle, and they did indeed discover and foil the Decepticon plot going on in the area. Decepticons Underground
Released as part of the Energon Igniters Power Plus Series subline, this Optimus Prime is a Scout-sized mold that converts from robot to truck based on his appearance in Age of Extinction in just a few steps. His only articulation is the swiveling upper arms & pivoting arm joints, and his fuel tanks also doubles as a flip-out cannons, activated in vehicle mode. As with all Nitro and Power Plus figures, Optimus also comes with an energon core, which allows his vehicle mode to propel forwards.
Power Surge Optimus Prime's scannable Autobot insignia is on his robot mode left shoulder. As he's packaged in robot mode, this badge is easily scannable while still in-package. Like his wavemate Bumblebee, this figure eventually saw release in the 11th wave of the Warrior Class line with the "Combiner Force" packaging. His scannable sticker is also altered, but scanning the badge only unlocks Energon currency, but not the character. This also applies to the original release's badge, but it unlocks 8 Ultra Sparks instead.

Legends Class Optimus Prime is based on his original Generation 1 appearance. He features a fake grill for his robot mode, and his large legs result in a fairly thick and compact truck bed. He is part of "Reveal the Shield", a subline that outfits all its toys with rubsigns, and in this case, it's located on the left side of the truck/his left elbow.
In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.
In the interim year, with the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.
Optimus Prime's Japanese name is "Convoy", which is named after his original name "Battle Convoy" in the Diaclone toyline, because the name "Optimus Prime" is difficult for Japanese kids to remember and pronounce.[2] All Optimus-inspired characters were called variations of Convoy in Japan up until the 2007 Transformers film, at which point TakaraTomy changed their minds and began using the name Optimus Prime as well. Presumably to avoid confusion, this change includes the Generation 1 version of the character as well, who is now called Optimus Prime in newer products and fiction such as Transformers United and Transformers: All Spark, though his name remains Convoy in material aimed at adult collectors such as Alternity and Masterpiece.

Part of the new Generations Cyber Battalion series, Optimus Prime is a new mold which stands 7 inches tall, and transforms from a truck (which is based on the Generations Thrilling 30 Legends Class Optimus Prime figure) into a robot in just 7 simple steps. The figure's transformation engineering had taken cues from the Reveal the Shield Legends Class Optimus Prime figure, while it still retains the same ol' articulation.
The protoform mode consists of eight pieces of metallic blue plastic that plug into the arms, chest, pelvis and legs of the figure. With these pieces attached, the figure can be manipulated in a manner that might charitably be called "transformation" into his meteor-like "entry mode," accomplished by doing little more than tucking the head out of sight and folding the chest back. This blue-and-grey lump can be mounted on a three-piece stand that comes with the figure, allowing you to display it in mid-plummet. Optimus Prime's Earth mode, meanwhile, is made up of many armor pieces (including a particularly large backpack) that form a rather kibbly robot mode, which can then transform into a truck approximating a Peterbilt 379. We would go into what an abominable, unintuitive, parts-massaging mess this transformation is, but we wouldn't want to fill up the rest of the page.
Part of the fifth wave of 2012-onwards Generations Deluxe Class toys, Thrilling 30 Orion Pax is a new mold with a robot mode inspired by Guido Guidi's design for the character, originally seen in Spotlight: Blurr. Some liberties have been taken with the original concept to facilitate his truck mode, which is a new design not based on the Guidi art. He comes with his Ion Blaster and an Energon Axe with a transparent red-orange blade, both of which can peg onto 5mm ports on his hands and vehicle rear sides. Although not depicted on the instructions, the Ion Blaster can also peg into the hole in the larger blade of the Energon Axe.
Although MechTech Optimus Prime's deco is similar to the first Deluxe Class figure, some of his parts (robot shoulder flaps, chest piece/truck front) were recast in blue plastic (with the chest being painted red), and his paint applications on the pelvis, headlights & thighs are omitted. His front truck hood/backpack's deco is altered: the truck steps and the fenders were painted blue, and the gold sprays on the flame tampographs are removed, while he features additional flame tampos on both sides of his front hood, and an Autobot Insignia on his left robot shoulder. He still retains the light-piping gimmick, but cast in clear plastic, with the eyeballs being (halfheartedly) painted with clear blue. His MechTech weapon is cast in transparent orange plastic, with the exception of the scope/lever and the gun barrel, which remained opaque silver plastic due to being cast with unpaintable plastic. He also features Cyberglyphics on the left side of his vehicle mode front hood.
1. Color diversity: Back in the 80s, most sets were comprised of a few basic colors; red, blue, yellow, white, gray, and black. It was much easier to acquire a “critical mass” of pieces in each color to start building one’s own creations in coherent color schemes. Space, Town, Castle sets all had the same basic colors. Today Lego uses a much wider array of colors in their sets. While this adds a lot of variety and visual appeal to today’s sets, this means that one has to buy a much larger number of sets (or scour bricklink) to get achieve a workable critical mass of pieces in each color. After buying some of the modern sets, I end up with a few dark-blue or lime-green pieces that I don’t really have enough to much with other than use as accent colors. They end up in my misc color bin in the event I decide to build the set they originally came with or sell them off on bricklink.
Rodimus Prime/Minor is a character who appeared in season 3 of the Transformers Animated series. He is a homage to the Generation 1 version of the character Hot Rod.[17] He wields an energon bow-and-arrow weapon of his own design.[18] On March 31, 2009, Derrick J. Wyatt, lead Transformers Animated Character Designer posted an image of Rodimus' vehicle mode, which is described as a futuristic muscle car that is mostly based on a 2008 Dodge Challenger with some elements of a 1969 Ferrari Daytona. This was revealed at the 2009 BotCon where Hasbro released an action figure of Rodimus Minor. It showed that the 2008 Dodge Challenger parts of Rodimus' vehicle mode were mostly based on the back, top, and sides of the vehicle, while the 1969 Ferrari Daytona parts were found in the front of the vehicle, most notably, the headlights.

We may be four days in 2019, but that certainly isn't too late to post a special New Year's message from everyone's favorite yellow Volkswagen Beetle, right? To promote the upcoming Bumblebee Movie premiere in Japan in March (that's right, March!) a New Year's video message from Bee himself has been posted to YouTube and Twitter. What the actual message says we don't know, but we'll update when we do. The message is then followed by a full scene clip (in English with Japanese subtitles) where - Read More
The Diaclone Powered Convoy figure had several additional features and modes which were mostly excised or left unmentioned for the Transformers release of Ultra Magnus. Principally, Powered Convoy came packaged with "Powered Buggy", who was left out of Magnus's release (see notes below for further details). Omitted from Magnus's instructions is the ability of his chestplate and super robot head to combine to form a small vehicle; the Powered Convoy version of the figure included small rolling wheels on the underside of the chestplate which were removed for Ultra Magnus. Additionally, three additional modes were included in the Diaclone instructions that Hasbro left out: a "preparation base" mode and an "Autobot base" mode were excluded entirely, while the third, a "catapult launcher" mode originally intended and proportioned to accommodate the Diaclone Jet Robo figure that became Starscream, was shown only on the front of his packaging, interacting with Silverbolt. The Japanese release of Ultra Magnus—released as part of the Scramble City sub-line—did include instructions for the preparation base and catapult launcher modes, but replaced the original Autobot base mode with a new configuration.
Designated "Optimus Prime" rather than the traditional Japanese "Convoy", this figure is a redeco of the previous Music Label Convoy figure into the character's traditional red, blue and silver color scheme. Unlike previous re-issues of the mold, iPod Optimus Prime's sports a paint application similar to KissPlayers Convoy, having its ABS/PVC parts painted over with a thin layer of his iconic red, white (silver if you will) and blue motif paint applications (with the exception of his iPod docking trailer). This includes his trailer, though the effect is somewhat marred by the large, visible gap on one side. When reconfigured into dock mode, the interior surfaces surrounding the speakers are decorated with black-on-silver techno-patterns as well as three "Optimus Prime" logos. The recessed space also features a stylised, almost Frank Milleresque, high-contrast portrait of Prime's face, although this is largely covered when an iPod is inserted. The figure comes in identical packaging to the original Music Label Convoy, save for the addition of a sticker illustrating the different color of its contents.
Prime comes with a unique Cyber Key, designed after the twin-handled appearance of the Matrix of Leadership, bearing the code l8p3. When inserted into the cannon that the rifle is part of, a pair of additional spring-loaded missile launchers flip down from the its sides. Slotting the key into the electronic cannon opens up the panels covering the front of the barrel, unlocking a different sound with its button is pressed. The paint job of the key is the principal difference between the Hasbro and Takara versions of the figure; the Japanese release features a metallic gold paint border around the key, furthering its resemblance to the Matrix. Other differences include more thoroughly painted knees and leg-armor cannons, yellow-painted signal lights above the cab, and the use of metal hinges to hold on Prime's wing tips, which were removable on Hasbro's version, and came disconnected in-package.
Armada Built to Rule Optimus Prime transforms into a fair approximation of his vehicle mode, but the robot mode is quite inaccurate, due to the very broad, flat Trans-Skeleton with thin, stick-like limbs attached to it. The set came with a very simplistic "Mini-Con" Sparkplug partner kit that did have a more dedicated "Powerlinx" connector than the standard construction pegs, though these are a bit too thin to be used as attachment points for regular Mini-Cons (they stay, sort of, but it's a very loose connection). The 101-piece set also features pressure-launch missile-firing "smokestack" cannons.

Like the previous Prime, it is loaded with features, though it ditches the first movie's Automorphing for the new Mech Alive gimmick. When a grey tab on his midriff is pressed, Prime's entire pectoral region "flexes", lights in his chest and eyes glow, and he declares "I am Optimus Prime" in Peter Cullen's voice. For the European release of the figure, to get past the language barrier, the Cullen sound clip is abbreviated to just "Optimus Prime"; in some regions, including Quebec and the UK (but only after a month or two), both versions were made available. A transformation sound effect activates when his torso is transformed, and once Prime is in truck mode, an almost unnoticeable button (a small square located beside the screw for the battery compartment, undocumented in his instructions) is revealed, which activates engine-idling noises.


Available exclusively from Japanese clothing company A Bathing Ape in March 2013, "Convoy Reissue BAPE VERSION RED CAMO" (コンボイ復刻版 BAPE® VERSION RED CAMO) is a redeco of the original Optimus Prime toy sporting a unique new red color scheme, along with a red trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.

For many, it may seems that the advent of licensed sets3 correlates with the perceived increase in prices. The 1990s and before were a nostalgic heyday of affordable LEGO sets. This is not quite true. Below is a chart that compares the price per piece of licensed sets and unlicensed sets starting in 1999. 1999 is the first year that LEGO had major licensed themes.
The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco from Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode, he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.
Optimus Prime's Japanese name is "Convoy", which is named after his original name "Battle Convoy" in the Diaclone toyline, because the name "Optimus Prime" is difficult for Japanese kids to remember and pronounce.[2] All Optimus-inspired characters were called variations of Convoy in Japan up until the 2007 Transformers film, at which point TakaraTomy changed their minds and began using the name Optimus Prime as well. Presumably to avoid confusion, this change includes the Generation 1 version of the character as well, who is now called Optimus Prime in newer products and fiction such as Transformers United and Transformers: All Spark, though his name remains Convoy in material aimed at adult collectors such as Alternity and Masterpiece.
A standard brick with two rows of four studs delivers a profit to LEGO that is orders of magnitude greater than any specialized element, all because the brick is what LEGO calls a “universal” or “evergreen” element that can be used in so many different sets. A one-of-a-kind, specialized piece, however, generally works in just one or a few sets. Moreover, the cost of molding a standard brick is orders of magnitude cheaper than producing a specialized piece.
In shock over the news, Optimus could do little more than scream in agony as Megatron and Starscream made their escape. After regaining his senses, the Autobot leader resumed contact with Ratchet, relaying the order that all Autobots were to return to base. There, Optimus tried his best to calm his panicking subordinates. Though he assured them that power reserves would allow their civilization to continue functioning for some time, they remained jittery. Optimus then declared that he would spearhead a counter-invasion of the Underground. Still, the Autobots remained uncertain, with Brawn pointing out that the Underground was not only vast and dangerous, but mostly unmapped as well. Taking full responsibility for SARA's abduction onto himself, Optimus suggested that he venture to the Underground alone and track SARA's energy signature. Hot Rodimus, however, was unwilling to allow his leader to take such a dangerous course of action, and volunteered to join him. The rest of the Autobots, finding their courage at last, followed suit. Moved by their devotion, Optimus accepted. He also thanked Hot Rodimus for calling out his foolishness, as Optimus now recognized that he would have made an even greater mistake by diving headlong into a doomed venture. Brawn approached Optimus next, insisting he join the group. Optimus at first refused, as Brawn had gotten badly injured during the invasion, but was convinced by the minibot's resolve. Once they were ready, Optimus issued the order to his Autobots... ROLL OUT! Resolve
Or instead of adding a surface to the package, sell it with its own little plaque / platform. A really thin piece of hard plastic or something that is smooth as well as possibly having a graphic or something printed on it. And then market it as a collectible and only make so many of them. I'm thinking in the price range of $199-$299. I'm not sure the costs going into it, so I can't say.

Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
Part of the first wave of Transformers: Robots in Disguise Hyperchange Heroes, Optimus Prime transforms from a futuristic trailer truck to robot in just 3 easy steps! His arms & legs serve as his trailer, while his chest serves as his truck front. He is also one of the few Robots in Disguise Optimus Prime toys which does not feature a faux window chest in robot mode. Both of his arms are articulated with 5mm holes in each hand.
TFcon has announced their latest guest update: Bill Ratner! People will recognize Ratner as the voice of Dashiell Faireborn in the Transformers Generation 1 cartoon. He is also better known by his code name Flint in G.I. Joe. TFcon 2019 is earlier than normal, taking place in Los Angeles, California from March 15-17. The guest roll call already includes Michael Bell, Neil Ross, Alan Oppenheimer, Paul Eiding, Arthur Burghardt, Michael Horton, Morgan Lofting, Jack Lawrence, Alex Milne, Donald - Read More
Hasbro executives, high off the revival of G.I. Joe through the same marketing concept, decided to acquire rights to toys from a variety of Japanese “Super Robot” series. Transformers didn't introduce the concept of super robots to the United States, but for the first time, the genre became widely recognized and popular outside of Japan. As the Transformers brand grew throughout G1, it began to define the genre, and all other super robots were measured competitively to Transformers' standard.
When Jazz brought Steve Guymo to the Autobot base, Optimus and the other Autobots realized that the Decepticons were behind the abduction of humans from airports across the nation. They were able to find the captive humans, whom the Decepticons were intending to ransom to the US government, and free them before engaging Starscream and his squad in battle. With the Decepticons defeated, the Autobots returned to base where Optimus thanked Steve for his help. Sun Raid (Listen 'n Play)

Unusually for the smaller Voyager Class of toys, Robo-Vision Optimus Prime comes packed in robot mode in a special hexagonal column box with many windows, similar to the original packaging for 20th Anniversary Optimus Prime. The package also includes a Robo-Vision Decoder. Strangely, this Target exclusive preceded the release of the regular Voyager by a large margin, coming out on June 2, 2007 with the initial wave of movie toys.

He comes with a shield with a fold-out handle, allowing Optimus to hold onto it with either hand in robot mode. It has a simple transformation gimmick for vehicle mode which is activated by pressing a button at the top of the shield, causing the sides to spring outwards. In vehicle mode, the shield can be laid flat across the bed of the truck, attaching via a post on the back onto the truck’s trailer hitch. Alternatively, the bumpers on the shield can be rotated outwards, and the front can be bent down in order to form a new front end and hood for "battle vehicle mode", resembling the Stealth Force vehicle modes seen in Dark of the Moon.
Categories: Articles in need of imagesUnreleased toysCharacter stubs missing toysAge of Extinction AutobotsBattle Masters AutobotsBumblebee AutobotsConstruct-Bots AutobotsCostco exclusivesDark of the Moon AutobotsKmart exclusivesMasterpieceMovie AutobotsNESTPlatinum EditionQ-Transformers charactersRevenge of the Fallen AutobotsSam's Club exclusivesStudio SeriesTarget exclusivesThe Last Knight AutobotsTitanium SeriesToys "R" Us exclusivesTransformers (2010) AutobotsTriple ChangersWal-Mart exclusives
The Transformers: Prime toyline hit shelves in November 2011. Originally, Hasbro played coy with the series receiving a toyline at all, emphasizing that it was a television series first and foremost. There were initial plans to release a small assortment of three Deluxe figures (Bumblebee, Arcee, and Starscream) in the Generations line before they were moved into the expanded "First Edition" launch line.
Though Prime's ultimate fate is unknown, in a story entitled "The Last Days of Optimus Prime", also from Transforce, Prime laments the new Transformers age without war and passes on to a Transformers afterlife, referred to as "J'nwan". The story is vague, however, and may be a metaphor for Prime rejoining the Matrix, as his time had come. In this realm, he was approached by the Predacon Sandstorm, who tried to plead for the help of Prime and the other legendary Transformers in dealing with a Unicron/Predacon hybrid named Shokaract. Prime refused, but later led a group of Transformers, including Megatron, Grimlock, and Soundwave), to distract the creature while Primus dealt the final blow.
This, of course, is all secondary to the main draw of the figure: it pulls an all-white trailer, which transforms into a working iPod speaker dock by rotating a substantial wedge of its full length 90 degrees . The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer. Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor with advice from an electronics specialty shop is recommended.
Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[38] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[39] 
×