Calibur Optimus Prime is a retool of the Armor Knight Optimus Prime figure, who is a retool of the original Age of Extinction Leader Class figure, with the fifth wheel hitch now forming his handheld shield based on the one used in Dark of the Moon, which results in a backpack-less robot mode. He also comes with an axe based on the one used in the third film.
Prime's firing missile and Mini-Con activated gimmicks remain accessible in this mode, but look a bit doofy if you deploy them. The initial Hasbro release of Prime had tabs in its Super Mode shoulders that prevented them from rotating above the horizontal default position, so as not to break the wires that run through the toy's right arm. Coupled with the limited elbow joints, this left Optimus Prime able only to point his weapons towards the ground, and the tabs were removed on subsequent editions of the figure.
Here is another thing, people complain about the presence of stickers in a LEGO set. I have news for them, stickers keep down the cost of a set. The latest modular building will have stickers with it, but it isn’t the last time a set geared toward adults will have stickers with it. At least LEGO listened to our wishes and got rid of STAMPS (Stickers across multiple pieces). Still that modular will be the only set that will have a red baseplate and printed golden star tiles. Translation, that set will be very hot on the secondary market when it is retired. It is going to be very hard to source out the baseplate if people try to build Palace Cinema by sourcing its parts. (Which is a project some are doing with Cafe Corner and the UCS Falcon)
Chronicle "Movie Optimus Prime" is an e-Hobby exclusive redeco of the Deluxe-Class Dark of the Moon Optimus Prime figure, and comes in a two-pack with a reissue of the Generation 1 Optimus Prime figure. Instead of the blaster/axe MechTech weapon the original release of the figure came with, Prime is armed with a redeco of Dark of the Moon Jolt's Blaster/Hand Cannon weapon.
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.
The values started becoming inconsistent and skewed in Generation 2 and Beast Wars, when Hasbro apparently thought no child will ever want a toy that is described as anything less than perfect. Thus it became rarer and rarer to see any low numbers. Most characters' numbers hardly ever dipped below 8, the Go-Bot version of Optimus Prime was the first character to have all values at 10, a trend that would repeat for most "leader" characters. When even more powerful versions of the Optimus Primal toy (such as Optimal Optimus) were introduced, Hasbro even invented a "10+" rating in an attempt to keep increasing the power levels. With the Transformers: Cybertron line a few characters even got "Unknown" and "Infinity" ratings.
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
In light of this news, if Optimus decided to nonetheless head back directly to Autobot headquarters, his squad returned to find their comrades nearly dead from the poison. But with Ratchet’s help, the antidote was quickly distributed, and the Autobots sprung back to life. Now cured, the Autobots discussed their next course of action; they had to prevent the Decepticons from poisoning the nearby water reservoir.
A redeco of the Generation 2 Go-Bot Firecracker, Go-Bots Optimus Prime transforms into a red Hot Wheels-sized Lamborghini Diablo. Like all Go-Bots, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly. He is armed with a small red laser rifle. The plastic colors are a "solid" version of Firecracker's color layout, substituting opaque red for transparent red plastic.
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.
If Perceptor gave out the right amount of an antidote, the poisoned Autobots were cured. Optimus ordered his troops to ready themselves for the incoming squadron of Decepticons. Perceptor’s antidote did have a side-effect on the Autobots, however; it gave them a fierce battle-fever, making them eager to take on the Decepticons head-on. Prowl suggested to Optimus that they instead opt for a more conniving counterstrike against the Decepticons, and ambush them instead.
Cosmos warned Optimus about a fuel plant the Decepticons were building, so Optimus took the Dinobots in his trailer and, under the guise of having a delivery for Shockwave, invaded the construction site and defeated the Decepticons. After this victory, Optimus turned his gaze skywards, and thanked Cosmos for his contribution to the Autobot cause. The Autobot Spy in the Sky
The second known version  ditched the triplechanging gimmick on the cab and simplified things a good bit. This Powermaster Prime has several distinct characteristics only seen in the second design, such as the wider "block head" and two faux smokestacks on top of either shoulder as opposed to one. Also, in a rather odd twist, this design features a black head and fists for both super and regular modes rather than the traditional blue. It also had yellow eyes in either mode a la the original Optimus Prime.
The first release in the Asian-exclusive Asia Premium Series toyline is an extensive redeco of the previously-Japanese exclusive Striker Optimus. He features a comprehensive paint scheme directly based on Jetpower Optimus Prime, with blue pinstriped flames, lots of silver paint, and vacuum metallized parts, although his hands are left unpainted in favor of painting his mirrors silver. Along with his standard accessories, he also comes with 2 battle blades, which were previously exclusive to Toys"R"Us Japan. He features the "We must stop the Decepticons!" voice chip, but batteries are not included. Rather helpfully, his instructions are supplemented with text instructions written in English for all the steps, as well as the additional photographs used for the previous Striker Optimus toy.
I had a transformers armada (ew) style Megatron with horns like a stag beetle that would turn into a tank. I actually liked the whole design and was upset when my sis broke it on purpose. She'd always tell on me for stupid shit so I saved this incident as a trap card for later. Too bad this sort of thing had a statute of limitations in our house lmao.
In Transformers: Armada and Transformers: Energon, Optimus Prime shares the role of main protagonist with Rad, Alexis, Carlos, Starscream and Hot Shot. The Optimus of this universe shares many similarities with his parallel universe versions, including nobility of spirit and a strong desire to protect all humans on Earth. In this continuity, the two sides are not looking for energon, but a small race of power-enhancing Transformers known as Mini-Cons. Optimus led his small band of Autobots to stop Megatron from acquiring their power for himself.
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth. With the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.
Optimus Prime has fictionally shown a dislike of certain kinds of music and dance. For the Marvel Comics continuity, the letters page for issue 324 mentions he hates the music of Mötley Crüe. In the cartoon continuity, "Blaster Blues" and "Quest for Survival" have Optimus react noticeably more passive-aggressively to Blaster's choice of music than the other Autobots. And in the Dreamwave Generation One continuity, Hardwired features an uncalled for negative remark about Jazz's dance skills.
Part of the new Generations Cyber Battalion series, Optimus Prime is a new mold which stands 7 inches tall, and transforms from a truck (which is based on the Generations Thrilling 30 Legends Class Optimus Prime figure) into a robot in just 7 simple steps. The figure's transformation engineering had taken cues from the Reveal the Shield Legends Class Optimus Prime figure, while it still retains the same ol' articulation.
1.) MP 10 EVA. Its arguably the best mold of any figure, and that color scheme! 2.) MP 12 Lambor. My fav transformer aand my fav car as a kid, cant beat it. 3.) MP Grimlock. Robot mode just looks like be dominates the shelf, regardless of who be is next to. 4.) MP Exhaust, mostly bc of the novelty factor as he is a pain to get in the States, plus his back story is cool. If not for that, MP 11 Skywarp would take this spot. 5.) MP Soundwave w/ cassettes. Duh!
Dark of the Moon Voyager Class Optimus Prime is an all-new mold. He features heatshield details in his sculpting and translucent solar panels on various parts of his body, and huge gas tanks. Optimus himself is differently proportioned, having larger feet and a smaller torso and arms. He also features some faux-kibble/parts: His actual windshield chest is being covered by a sculpted panel featuring his characteristic deformed windshield-chest, and a pair of sculpted tires on his thighs. His pair of optics is designed to have a light-piping gimmick, but it was rendered useless since it was painted in smoke gray on top of the colorless transparent plastic.
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.