The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco from Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode, he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.
The mold suffers from a minor design oversight, wherein the rear Nissan badge collides with his left leg strut when the left foot is hinged over and pegged into a clear plastic socket during transformation, with the results being that the connection is slightly crooked, isn't very secure, and sometimes pops off, and that the crooked pegging often causes the socket to crack.
The 1984 and 1985 toy lines contained several figures of note. Megatron, the Decepticon leader, originally transformed into a realistic Walther P38 pistol with stock and barrel extensions and scope. The Megatron toy was delayed till 1985 for release in the UK. The Constructicons were the first "gestalt" team in the Transformers line, but were different from most subsequent gestalt teams in that they consisted of six members instead of five. The Autobot Jetfire was repainted from a Macross toy, specifically the VF-1 Valkyrie, and the character was renamed Skyfire in the animated television series program for copyright reasons.
Ugh. Hey, congrats to everyone who wanted this, but do we really need another MP Prime? MP-10 is fantastic as it is, and it certainly looks better than this. MP-10’s only problem for me was the faux grille. If they made a new MP Prime that looked good and didn’t use a faux grille, then I would be interested. Instead it looks like none of the front uses any real truck parts; even the chest windows look different from the truck windows!

Tomica Optimus Prime is a die-cast non-transforming toy of his truck mode from Prime. It was sold as part of the "Dream Tomica Series", a subline featuring exclusively fictional vehicles. Like all Tomica toys & all Generation 2 GoBots and Spychangers, Optimus Prime features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces. However, they do not convert into robot mode.
In Transformers vs. G.I. Joe comics, Bumblebee is offed as well. His ship is damaged during a space chase with Starscream, so he lands on Earth where G.I. Joe and Cobra are going at each other (as per usual). But his fatal mistake was helping G.I. Joe favorite Snake Eyes, who was trying to take on Starscream. In the process, Bumblebee got in the Joe-Cobra crossfire and was ripped apart by missiles. This wasn’t a true death, however. First, Starscream took Bee’s head to Megatron, who wore it on a necklace (yes, really), but eventually the head got back to the Autobots, who planted it back on his repaired body and he came back to life.
For reasons unknown, his ion blaster was sculpted with a large, rectangular handle, requiring accommodating fists. In order to make use of the other weapons in the line (like his own rocket launcher and the solitarium weapons), he comes with an extra pair of replacement fists with smaller, circular peg-holes. This replacement-fist method is also used to plug in his clear-plastic energy axe.
As he and Prowl discussed the wisdom of evacuating, a huge explosion obliterated the Forum of Enlightenment. Optimus led a team there, realising that the destruction was a message from Megatron. Leaving his team, he ventured underground, encountering Shrapnel, who blasted him into a pit. The War Within #2 Exploring the underground, Prime had a strange vision of a transparent version of himself, which warned that he had to grasp Cybertron's significance. Then he was attacked by Soundwave and the Insecticons, whom he was able to easily best by using the labyrinthine environment to his advantage. He then felt himself led to a confrontation against Megatron, and both faction leaders met atop of a bridge, overlooking a deep abyss. Starscream blasted the bridge Optimus and Megatron were standing on, plunging them into the chasm. The War Within #3 Recovering, Prime heard another disembodied voice telling him about Cybertron. Before he could look for a way out, Megatron found him, and informed him about the true nature of the Matrix, telling Optimus how it could be used to power Cybertron's planetary engines, transforming it into a space-faring war-world. This spurred Optimus to fight back, but before long, Megatron took control of the battle, smashing his fist into Prime's chest to get at the Matrix. A blaze of light enveloped the pair, who found themselves abruptly on 20th century Earth. The War Within #4
Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.

Many who received their first LEGO set in the early 1990’s are now adults looking forward to buying a LEGO set for their first child or for themselves. When we are younger, we do not fully understand how money works. We do not realize that a large LEGO set can require hours of work to earn. We only know what we want. I would wager that it isn’t until our first jobs that we can fully appreciate the value of money. We all wanted the large sets as kids and we didn’t realize how hard our parents had to work for them.
If Optimus allowed the cured Autobots to charge headlong into battle, he and the rest of the Autobots who were still running low on fuel stayed behind as back-up to the main charge. The Autobots’ first wave of warriors were quickly overpowered by the arrival of Megatron, prompting Optimus to lead the energy-depleated Autobots into the fray. Optimus’s opening volley struck down Shockwave. Optimus and his troops soon found themselves running on empty, and Optimus called for a retreat. Thankfully, the Decepticons were damaged enough through the course of the battle, causing them to retreat as well.
According to IDW Publishing's Transformers: Movie Prequel comic book, Optimus Prime and Megatron co-ruled Cybertron until Megatron began a war for control of the Allspark. Optimus formed the Autobots, a militia of civilian transformers sworn to protect the Allspark. Optimus fought back, willing to doom Cybertron itself to deny Megatron the Allspark. His reasoning was that a new homeworld could be rebuilt with the Allspark once Megatron was no longer a threat. He entrusted Bumblebee with the task of distracting Megatron at Tyger Pax long enough for the Allspark to be sent into space.
Power Surge Optimus Prime's scannable Autobot insignia is on his robot mode left shoulder. As he's packaged in robot mode, this badge is easily scannable while still in-package. Like his wavemate Bumblebee, this figure eventually saw release in the 11th wave of the Warrior Class line with the "Combiner Force" packaging. His scannable sticker is also altered, but scanning the badge only unlocks Energon currency, but not the character. This also applies to the original release's badge, but it unlocks 8 Ultra Sparks instead.

If Optimus ordered his troops to attack the Decepticon base, they soon reached an area free of the anti-gravity beam’s influence. They were then attacked by a small fleet of Decepticons. Optimus targeted their squad leader, Dirge, knowing that by downing him, the Decepticons would be significantly demoralized. Dirge was forced to break-off his attack when his back-up was taken out, knowing he wouldn’t be able to take Optimus on without it. Losing their advantage quickly, the Decepticons retreated. But with the battle over, the Autobots noticed a small human boy at their feet. The boy was Buddy, a stowaway from the nearby town, and though Optimus was displeased with the tag-along, the Autobots could not spare the time to bring him home. Arriving at the Decepticon base, Megatron delivered an ultimatum; if the Autobots did not surrender Optimus Prime to the Decepticons immediately, he would use his gravity beam to have the nearby humans float off into space.
Early in this new series of encounters with Megatron, Red Alert contacted the Autobots on Earth and asked for Optimus Prime to join then on Velocitron. Ransack and Crumplezone tricked Hot Shot and Dirt Boss into believing that a race between them would determine which of them would be allowed to race Override for the Planet Cup. During the race, Ransack and Crumplezone caused a rockslide that buried Hot Shot. Hot Shot was saved when Optimus Prime, Vector Prime, and Landmine arrived, but Optimus was upset that Hot Shot had become involved with the locals. Clocker and Brakedown were eager to help the Autobots. After being unable to obtain the Planet Cup from Override herself, Optimus Prime endorsed Hot Shot's plan to win the cup in a race with the aide of the other Autobots. Ransack and Crumplezone were contacted by Megatron and were told to keep on eye on things. They also decided to enter the race, either to win the cup and cause as much damage as they could to the other racers. Override, Dirt Boss, Ransack, Crumplezone, Optimus Prime, Hot Shot, Red Alert, Landmine, Clocker and Brakedown participated in the qualification round. In the final episode of Transformers: Cybertron, Optimus Prime proposed a new Space Bridge project using the power of the four Cyber Planet Keys and the four great Cybertronian ships. Many Autobots and former Decepticons joined in the project. Jetfire was left in charge of Cybertron as Optimus Prime led the Atlantis with the Earth Cyber Planet Key, joined by Red Alert, Safeguard, Scattorshot, Leobreaker, Menasor, and Heavy Load.

During the war, Optimus was killed in battle by Megatron, but was eventually resurrected. The Fight Begins Coming to the dire realization that the war against the Decepticons had become a never-ending arms race, Optimus Prime challenged Megatron to single-combat, with their troops acting as witnesses to their terrible and final clash. The battle between both faction leaders ended with Megatron beaten down and goading Optimus into delivering the kill shot...


Universe Optimus Prime is a redeco of the Robots in Disguise Scourge Spy Changer toy. He replaces most of the black plastic with predominantly red and blue, with silver for detailing, with an overall deco making him resemble the original Optimus Prime. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
Long before the internet came along and ruined life as we knew it, Children amused themselves with the most primitive of toys. At the top of the food chain was the yo-yo. Believed to date back to around 500 B.C. in Greece, and even believed to have been used as a crude weapon in the Philippines, the yo-yo (pronounced yo-yo) made a roaring comeback in the 1920s as a toy, and to a lesser extent as a weapon.

After their own Optimus Prime disappeared, Scavenger and Smokescreen discovered an alternate version of Optimus Prime lying unconscious and barely alive in Autobase Earth. Though Red Alert did what he could, the mysterious Prime reactivated only long enough to utter a cryptic statement about the walls crumbling and the coming of chaos, then died. Worlds Collide, Part 1 of 4
There are two versions of the voice changer helmet with two different pre-recorded voices. An earlier release features a voice similar to Garry Chalk, while the later release features the voice of Peter Cullen. The latter version has modified packaging under the 'Try Me!' blurb, stating it has 'Real Movie Voice!', though the updated version has also appeared in the original packaging without the 'Real Movie Voice!' notice.
Based on the Classics toy line, the Timelines 2007 story is set 15 years after the end of the Marvel Comics story (ignoring all events of the Marvel UK and Generation 2 comics). According to exclusive bio information in the Transformers Collectors' Club magazine #15, Hot Rod followed Optimus Prime back to Cybertron from the Planet Klo. Once back, Hot Rod took up racing, but after a while found it pointless. Optimus Prime assigned to help organize the millions of Cybertronian refugees who returned to their home world. Hot Rod chaired the Cybertron Grand Challenge race, a race which featyred combined Autobot/Decepticon teams. With his maturing Hot Rod changed his name to Rodimus and was chosen to return with Optimus Prime to Earth to stop Megatron. Optimus Prime returned to Earth commanding Bumblebee, Cliffjumper, Grimlock, Jetfire, Mirage and Rodimus. When the Cybertronians Skyfall and Landquake arrive on Earth unexpectedly, Megatron attempts to destroy them, but Optimus Prime and his Autobots are able to drive Megatron away. Rodimus is wounded on a mission with Optimus Prime, before being brought back to the Autobot base.
Platinum Edition Optimus Prime was only available as part of a 2-pack with Megatron, named "One Shall Stand, One Shall Fall" after Optimus Prime's famous line in the movie. In the United States and Canada, this set was officially released as an Amazon exclusive. It was also available in several of Hasbro's Asian markets (namely the Philippines and Singapore; it's currently unknown whether it was exclusive to any particular stores there or not). In Australia, it was sold at Myer stores, whereas in the United Kingdom, it was both sold at Toys"R"Us stores and available via Tesco's website (but never found in stores). Surprisingly, it was (and still is) a common find in Brazilian online stores.
A (technically) unreleased "black" redeco of Henkei Voyager-sized Convoy using the same plastic layout and paint mask but replacing red and blue with black, silver with gray, leaving the previously vacuum-metalized grill/fender area unpainted, changing the blue tint for the windows to red and changing all silver and yellow paint operations to blue. The red Autobot insignias would have remained unchanged.[7]
Prime is armed with a spring-loaded missile launcher that stores on the rear of his truck mode (which becomes the backpack of his robot mode) when not in use. Like most of the weapons of the Energon line, it sports a 5mm post, allowing it to be held by most every Enegon figure, to combine with assorted other weapons and Energon weapons released in the series, and to peg into numerous compatible ports shared by many figures, like the hole in the radar of Prime's own trailer, or even conveniently placed 5mm screw holes like those of the Prime Force.
In the United States, Canada, and Hasbro's Asian markets, Masterpiece Movie Series Optimus Prime was exclusively available from Toys"R"Us, whereas in Spain, he saw a wider release, being at least available via the Spanish subsidiaries of Amazon and Carrefour. It's currently unknown if he was also available in stores, or limited to online purchases. In Greece, he was officially available via at least one toy store chain, aptly named simply "Toys-Shop", but again might have been available online only.
Hasbro's subsidiary Milton Bradley (MB) released the toy in Europe in late 1985, following a slight delay due to licensing issues;[13] there are no less than three variants of MB-packaged Optimus Prime, one of them manufactured by Takara and sporting blue feet, the other two manufactured by Joustra as part of a deal with Hasbro/MB, one of them with blue and the other one with red feet;[14]
Also during this time, Micromasters were introduced, and would become one of the last sub-groups of Generation One. Micromasters were tiny Transformers created to compete with the Micro Machines, a hugely popular toy line of the time. While many of the figures had simple transformations and little detail due to their small size, the line eventually expanded to feature Micromaster Transports and Bases, in which Micromasters came with larger vehicles or bases that transformed.

There may be two things you didn’t know in this one: 1) Bumblebee is in the Transformers Hall of Fame; and 2) There’s a Transformers Hall of Fame. The shrine to all things Transformers was the brainchild of Hasbro, the American toy company that worked with Japanese toy company Tomy to create the Transformers in 1984. Starting in 2010, they wanted to honor not just popular characters, but also the real people behind the toys, TV shows, comics, and films.
The live-action Transformers movie was slated to premiere in the U.S. on July 3, 2007, and was a joint collaboration among DreamWorks SKG, Paramount Pictures and Hasbro, Inc. Paramount Pictures was slated to release the film in the United States, as it had by now made DreamWorks Pictures one of its wholly owned subsidiaries, and was also to be responsible for the international release of the film through United International Pictures, its joint venture with Universal Studios. The feature was directed by Michael Bay from a screenplay written by Alex Kurtzman and Roberto Orci. It was a new story, set apart from the previous incarnations of the cartoon(s) and comic(s). A new origin and characters were introduced. Steven Spielberg, who with Jeffrey Katzenberg and David Geffen had established DreamWorks SKG, was the main executive producer of the film, with Lorenzo di Bonaventura, Tom DeSanto and Don Murphy serving as co-executive producers. In practice, this meant that they were the primary financial sponsors of the film.
The second Nightwatch Optimus Prime was released as part of the "AllSpark Power" second half of the Movie line. He is similar to the UK version of Nightwatch Prime, replacing most of his red and blue with different shades of blue and black, retaining his resemblance to Diaclone Powered Convoy in most respects. However, the subdued black and copper on the first Nightwatch Prime have been replaced with gold and a very bright blue, to signify the All Spark energy affecting the Transformers. The translucent parts were also cast in purple translucent plastic instead of black translucent plastic.
2. Piece diversity: Today the total range of piece types and the number of new piece types introduced every year has skyrocketed since the decade of the 80s. As a kid, the new pieces introduced every year were indeed one of the great answers to my parents’ pleas of “don’t you already have ENOUGH Legos?!?!” However, the quantity of new piece types again coupled with the broad color diversity again requires much more Lego to be purchased to attain that “critical mass”.
After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.

Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.
In robot mode he resembles previous Optimus characters: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
Sold at the rather exorbitant price of $75, this re-release of the original Generation 1 Optimus Prime toy is actually one of the most visually different from the other "straight" reissues of the mold, despite Hasbro's assurance that this is the toy you had as a kid. Positively anemic in comparison with the original toy, this Prime's red parts are visibly paler than usual, while his blue parts are much lighter (although the version released at Canadian retail reportedly sports a deeper shade of red again). This shade of blue extends to both Roller (a lighter blue than his traditional dark shade, yet darker than the lightest the figure has been in its history) and the internal workings of his Combat Deck, which is itself a much flatter shade of light grey, compared to its normal dark, swirled metallic silver color. In addition, the toy features the now-customary shortened smokestacks, and the elongated missiles seen on the Commemorative Series release. While all reissues of the Prime mold since 2003 have used the original thick-barreled mold for his ion blaster, this version includes the slender sculpt instead.
Forming a roughly 11-inch figure when fully assembled, Diablock Convoy is highly articulated, using 12 ball-jointed block pieces, giving him a range of motion similar to Masterpiece Prime, with the exception of the head, which can only move up and down, not side-to side. Speaking of the head, it is by far the most stylised aspect of the figure, with no real attempt to approximate Prime's face or mouthplate inside a simplified helmet, mainly featuring only a reversed block that gives the odd impression of a cycloptic eye. It is possibly intended to actually represent his forehead grill, as a yellow block inside his head construction remains barely-visible through a slit in his face, possibly intended to represent the classic toy's yellow eyes.

The original Optimus Prime toy started life as the Diaclone toy, "Battle Convoy", created by a team of Takara designers who came on board when the original designer fell behind. This team included Hiroyuki Obara (listed as the sole creator on the toy's patent) and famed mecha designer Shōji Kawamori. The toy transforms into two major components; the first component being a red and blue White Freightliner WFT-8664T cabover semi-trailer truck partially composed of die-cast metal, and the second component being a large silver trailer of currently-undetermined model.
×