In Transformers: Alliance, Optimus Prime and the Autobots aid the human soldiers after the battle in Mission City and destroy the Allspark-powered machines that were created. A trailer is obtained for Optimus Prime to carry the remains of Jazz. The Autobots leave Mission City as the Sector 7 personnel arrive to claim the remains of the Decepticons. About a month later, Epps and Lennox contact Optimus Prime about aiding them in escorting the remains of the Decepticons to the naval yard. They are spied on by Barricade, who transmitts the information to Starscream.
Having been caught unaware by a surprise attack launched by the Decepticons, Optimus led his troops in a losing battle against their mortal enemies. Though Optimus managed to dispatch a few Decepticons, namely Thrust, whom he punched through the chest, he soon found himself crippled and surrounded by enemy forces. Praying to Primus as the Decepticons readied their weapons, Optimus heard Grimlock calling out to his fellow Dinobots to combine, prompting the Autobot leader to yell out a plead to Grimlock to stop. It was too late, however, and The Beast began rampaging, killing Autobots and Decepticons alike. Taking advantage of the situation nonetheless, Optimus tackled Megatron and began beating on the Decepticon leader. The tide of the battle now shifted, Optimus attempted to reach Grimlock’s consciousness within The Beast so that its mindless carnage could come to a halt. It didn't work. The Beast Within
Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.
Hybrid Style Optimus Prime is an insanely detailed and complex transforming toy, created under the supervision of famed mecha designer Shōji Kawamori. Standing only three and three-quarter inches tall in robot mode, the figure is partially constructed from die-cast metal and features one of the most complex transformation sequences ever seen on a Transformers figure of its size. Alas, the small size of the figure also works against it, as it required several design concessions that resulted in (if we're being nice about it) an unimpressive cab mode.
Optimus Primal, leader of the Maximal faction in the Beast Wars animated series and toy line, is not Optimus Prime. Primal is one of the Maximal descendants of the Autobots, who took the name to honor Optimus Prime. The same applies to the Megatron of this era. Before the animated series began, Hasbro envisioned Prime and Megatron as their beast counterparts, but once the animated series began, this had already been changed. Design elements, such as Prime's mouth-plate slitted to add an actual mouth for the animated series and the first mini-comic that came packaged with the toys, suggest this. Nonetheless, Optimus Prime and Megatron were a major reason the Beast Wars began, as Megatron's Predacon namesake traveled back in time seeking to alter history and insure that the Decepticons triumphed over the Autobots.

For its release in Korea, Hasbro Asia provided a collector coin featuring truck-mode Optimus Prime on one side and "MP-01L" on the other. The coin came mounted on a card featuring lineart of the Autobot leader's head, the stark black design of which could be mistaken for promoting the earlier "Sleep Mode" release. The limited release (and general lack of enthusiasm for the collector coins in Korea) makes this one of the more difficult Masterpiece coins to find.
A special edition Bearbrick released in celebration of the Transformers 30th anniversary, Optimus Prime is a redeco of Bearbrick G1 Optimus Prime in a deco based on his Age of Extinction appearance. He transforms from a Bearbrick painted up like himself to a bear-eared robot and comes with no accessories, but holes in his robot mode hands can accommodate other toys' weapons.

The use of a G1-based Orion Pax design and an Aligned-based Optimus Prime design with Movie Optimus Prime packaging art makes it hard to know where on the wiki this should go, but given the general movie-themed bent of the Tribute line, we're putting it here. Continuing the tradition, the 2-pack was first released in some Asian countries like Taiwan without any prior announcement from Hasbro itself. A few months after the 2-pack's release, Tribute Optimus Prime & Orion Pax saw worldwide release through Amazon, including an Amazon Japan listing bearing a The Last Knight ID number.
The third United Optimus Prime toy is a redeco and slight retool of the Deluxe Class figure from Hasbro's 2010 Transformers toyline, itself an homage to Prime's Generation 2 "Laser" form. The toy features translucent blue plastic as opposed to Hasbro's orange, red paint is used on the biceps instead of blue paint, extra red paint applications on the knees like the original's sticker detail, and more broken-up red apps on the shoulders. Silver detailing was added to the cab mode on the grill, the bumper, and near the doors. The blue plastic in cab mode is now black plastic to make the figure more accurate to the Generation 2 original. The gray plastic is changed from the Hasbro version to more closely match the 2006 reissue of Laser Optimus Prime. Black paint was applied to the cab mode to mimic the fade from red to black on the original Laser Optimus, but still includes a flame deco like the Hasbro version, only in a different design. It lacks the roof-mounted rubsign of the Hasbro version, instead including Autobot insignias on the cab doors. (Disappointingly, they are Generation 1 insignias, rather than Generation 2 ones!) Additionally, a retool was made to the peg on the inside of his right shoulder, to make it shorter and wider than the Hasbro version, allowing it to move freely without hitting the torso, unlike the Hasbro release.
Exclusive to Japanese ToysЯUs stores, this redeco of AM-01 Optimus features warmer, metallic shades of plastic, replaces the gray plastic around his windshield-chest with red, and replaces the clear-blue plastics with clear-black. He comes with the Hasbro version's battle sword, which is now a darker, warmer shade. For Arms Microns, he now comes with O.P. A, Pral G, Sais G, and Jayz G, and the latter three can combine to form a golden version of the Cosmotector shield (hence the name).
Available only with the Bot Shots Dragon Track set, this version of Optimus Prime is a new mold, changing from a robot form resembling Generation 1 Optimus Prime, into a truck with a rocket exhaust molded into the back of its trailer. As a Flip Shot, he, er, flips up when auto-transforming. He comes with a launcher that can be connected to the track, as well as Flip Shot Megatron and his launcher.
The live-action Transformers movie was slated to premiere in the U.S. on July 3, 2007, and was a joint collaboration among DreamWorks SKG, Paramount Pictures and Hasbro, Inc. Paramount Pictures was slated to release the film in the United States, as it had by now made DreamWorks Pictures one of its wholly owned subsidiaries, and was also to be responsible for the international release of the film through United International Pictures, its joint venture with Universal Studios. The feature was directed by Michael Bay from a screenplay written by Alex Kurtzman and Roberto Orci. It was a new story, set apart from the previous incarnations of the cartoon(s) and comic(s). A new origin and characters were introduced. Steven Spielberg, who with Jeffrey Katzenberg and David Geffen had established DreamWorks SKG, was the main executive producer of the film, with Lorenzo di Bonaventura, Tom DeSanto and Don Murphy serving as co-executive producers. In practice, this meant that they were the primary financial sponsors of the film.
When Optimus transforms, his cab becomes an ion blaster and his trailer disconnects, forming a combat deck. The combat deck supports a mobile battle-station and command headquarters armed with assorted artillery and beam weapons that fire automatically. The combat deck can also serve as a radio antenna for battlefield communications between the autobots. The combat deck also included "Roller", a mobile scout buggy meant to scout behind enemy lines. When Roller is deployed, Optimus can see and hear what Roller sees and hears.[4] Injury to one component is felt by each of the others. If the combat deck or Roller were to be destroyed, Prime could survive. However, despite the slight degree of autonomy they possess, the combat deck and Roller would not be able to survive without Optimus.
Using the Spacebridge to travel to Earth, Prime was sidetracked when Megatron transported him to Unicron's body. Megatron attempted to cajole him into distracting Unicron long enough to transfer his consciousness into a new body. Prime refused until Megatron showed him what was happening on Earth. A massive Terrorcon invasion had devastated many of Earth's greatest cities, with the stalwart Autobot defenders nearly overwhelmed. Megatron offered to deal with the invasion if Prime would aid his rebirth. Out of options, Prime agreed, and battled Unicron's internal defences to disable a sensor, allowing Megatron's resurrection. As Megatron teleported to Earth to keep his end of the bargain, Prime, still inside Unicron, prepared to fight back.
The energy of the explosion absorbed by the virus, the Autobots dug themselves out and set about recovering their fellows whom Megatron had used to power the cyber-virus in its early stages. Ironhide passed on a message from Megatron — there was a surprise in store for the Autobot leader. Optimus and some Autobots including Superion sped to San Francisco, where Megatron had unleashed Devastator. As Prime battled Megatron, he took time to save three humans who were threatened by falling debris, only for the humans to turn on him. The defeat of Superion turned the tide of the battle against the Autobots. Prime Directive #4
In the Escalation miniseries, Megatron engages Prime and, boosted by Ore-13, overcomes him. Believing their leader dead, the rest of the Autobots attempt to buy the newly arrived Hot Rod time to collect the clone. Prime, who had transferred his consciousness to a backup memory in his trailer command post, advised them to exploit Ore-13's weakness and assault Megatron all-out, catalyzing the Decepticon leader's Energon supply and crippling him.
This Kabaya candy toy of Cybertron Optimus Prime transformed into cab mode through disassembling into its component pieces and being rebuilt, hence the line's name of Blockformers. He came with his hand-held rifle, and a stick of chewing gum. Each figure in the Blockformers line came with additional pieces that could combine with Prime to either make his trailer in vehicle mode, or convert his robot form into Super Mode. Prime himself came with his missile pod/shoulder brackets, his leg armor and guns, his right cannon came with Leobreaker, his backpack and wings came with Override, his Super Mode head came with Scourge, and his left cannon came with Evac.
The 2010 Transformers "Reveal the Shield" Legends Class Optimus Prime sculpt in the deco from the first Chronicle EZ Collection wave (see below) was released as a "Dollar Store" exclusive (available at stores such as Dollar General and Big Lots) in generic 2010 Transformers packaging packaging alongside Starscream, Bumblebee and Megatron. The initial release saw the copyright year removed, while a later running change variant featured the new tooling originally used for Generations Legends Class Motorbreath, with not only the retooled hands and a hole on the back of his head/top of his vehicle mode compatible with 3mm posts, but also Motorbreath's sword accessory.
It should also be mentioned that a few years back, I think around 2009 roughly, TLG started using smaller boxes for the same size sets. It was part of a move to not only save money, but also become greener as a company. Because the sets now take up less physical space on the shelf, and boxes with the same number of pieces appear smaller than sets from previous years, it could also contribute to the perception that you are getting less for your money today. In reality they are one and the same product.

While they wandered through the tunnels, the Joes and Prime found cave paintings that described the last visit to Earth by the planet-eating god Unicron. They were attacked again by Bludgeon and Cobra-La minions, but were led away by a ragged Joe Colton, prisoner of Cobra-La for the last 25 years. Black Horizon, Part 1 of 2 Bludgeon managed to find them again and during a second battle Prime tore open the Pretender's shell, revealing Bludgeon's robot form inside. Bludgeon tripped and dangled dangerously over a chasm, but rather than let Optimus Prime save him, Bludgeon forced Prime to drop him to his death laughing all the way down.
Limited to 10 pieces, this gold chrome redeco of Evasion Mode Optimus Prime is released as part of the Transformers Battle Command Campaign given away to ten winners via a lucky draw. The initial phase for entry was operated in July 2014, when those wishing to enter the draw had to mail in the proof of purchase from the Takara-Tomy Lost Age Optimus Prime. The actual mailing out of prizes was to take place in November 2014.
Released as part of the Energon Igniters Power Plus Series subline, this Optimus Prime is a Scout-sized mold that converts from robot to truck based on his appearance in Age of Extinction in just a few steps. His only articulation is the swiveling upper arms & pivoting arm joints, and his fuel tanks also doubles as a flip-out cannons, activated in vehicle mode. As with all Nitro and Power Plus figures, Optimus also comes with an energon core, which allows his vehicle mode to propel forwards.

When they could not reanimate him, they used his body as a lure instead, bringing the Autobots to their lab, where they are infected. As this "Hate Plague" began to spread across the galaxy, Sky Lynx retrieved a Quintesson, who fully restored Optimus Prime to life. Coating himself in Morgan's heat-resistant alloy, Prime reclaimed the Matrix from Rodimus and unleashed its concentrated wisdom to destroy the Hate Plague.
In an alternate version of this reality, Rodimus was forced to deal with a militant and aggressive Optimus Prime, and Cybertron was soon wracked by a three-way war between Optimus' Autobots, Rodimus' Omnicons, and Megatron's Decepticons. Unfortunately, the balance of the conflict tipped with the arrival of dimension-hopping tyrant Megazarak, whose Destructicons allied with the Decepticons, creating a force that soon annihilated Autobot and Omnicon alike. However, the Destructicons then turned upon their allies and destroyed them before being abducted by Unicron. This universe was then drained of all life and energy by Tornedron, whose creator Primacron was also destroyed.
If there was one thing the toy planes of yonder were lacking, it was controllability. Guaranteed crash landings and the subsequent walks of shame to go pick up the pieces started to wear a little thin. The advent of radio-control provided an answer for that. But for model builders Aviation Design, that was child's play. Hense, the birth of the FALCON 7X business jet.

Optimus pondered Sunstreaker's whereabouts after noticing that he had been absent from Autobot headquarters for longer than expected. The answer came through Blaster, who relayed a message from Megatron; Sunstreaker was the Decepticons' captive. Megatron demanded that the Autobots surrender, or else Sunstreaker would be destroyed and rebuilt as a Decepticon! The Autobots refused to give up without a fight, but Optimus took care to explain the threat they were up against before a rescue party headed out. Optimus told Sideswipe, Slag and Sludge of Devastator's combiner nature, and warned them not take the danger he posed lightly. The rescue squad failed in liberating Sunstreaker, and were captured themselves. The Autobots were shaken by this turn of events, but Optimus was able to think up a new plan to trick the Decepticons. He ordered his Autobots to build a hollow statue of Devastator for him and his soldiers to hide within. Optimus then wrote a letter explaining that the statue was a peace offering for the Decepticons, and the completed decoy was placed before the Decepticons' base. The ruse worked, and Optimus and his troops burst forth from the false Devastator after the Decepticons had let down their guard. An all-out brawl between Autobots and Decepticons followed. The fight came to an end when Megatron attempted to down Optimus with his fusion cannon, only for Optimus to deflect Megatron's beam back at him by bouncing it off a reflective piece of metal. With the Decepticons defeated, Optimus ordered his troops to retrieve their wounded and return to Autobot headquarters. The Autobots' Secret Weapon

Over twenty-plus years, there have been a bajillion releases of this mold, some identical to the original toy, and some featuring significant variants with notably different paint jobs, color schemes, accessories and other pack-ins. We have striven to list all these variants on this page under their respective series; for a quick-reference list of all variants and releases check here. The cab robot has also been used sparingly to represent different characters; outfitted with different trailers, it has become Generation 1 Ultra Magnus and Pepsi Convoy.

×