The figure also features a hollow trailer (which also serves as his legs), fit for the Warrior Class-sized toys. The trailer can also be converted into a battle station. Because of the toy's design & transformation, he is kinda show-accurate. Optimus also features 5mm-compatible ports on his trailer, arms, shoulders, legs, knees, waist armor, and the pop-out Decepticon Hunters. He also includes many weapons, including his axe with a short handle. The included weapons can also be combined with the Decepticon Hunters into a dual-bladed weapon. All of his included weapons can be wield by any Warrior Class figures, although the accessories are associated with Bumblebee, Grimlock, Sideswipe, Strongarm, Jazz, & Drift.
The "robot mode" of Optimus Prime is where the pullback motor and working wheels of the toys lie. Optimus is sculpted in blue plastic, pre-posed in an odd crouching pose with zero points of articulation. His right knee is bent back, with his right arm touching his knee, while the left side has the leg forward and the left hand holding onto his butt. The toy is as sparsely painted as the truck, with light blue eyes and chest windows, gray hands and feet among other parts, and red forearms. Two panels on his back have red flame tongues on them.

Part of the third wave of 2012-onwards Generations Legends Class toys, Thrilling 30 Optimus Prime is a new mold that is roughly the same size as a Cyberverse Commander Class toy. Both his truck and robot mode are based on his Don Figueroa-designed body from IDW's ongoing series, and features 5mm-compatible hands and roof. He comes with an Ion Blaster which has both 5mm and 3mm posts.
The mid-range Voyager class Movie Optimus Prime toy transforms into an amalgamation of the Kenworth W900 and the Peterbilt 379, making this toy fairly inaccurate to the actual vehicle Optimus Prime turned into. Because of the smaller size and lessened complexity, the Voyager class Optimus Prime features a significantly different transformation sequence compared to the Leader class toy, and indeed, the actual CGI design. However, as the actual truck cabin no longer forms his chest, the cabin now features a small interior with opening doors and a non-removable cowboy-hat-bedecked driver figurine that flips out of the seat when the driver's side door is opened.
General Optimus Prime later attended a meeting of the Convoy held by Starscream. There, he assured the others present that he had been mistaken about the rumored Megatron's identity. Starscream was convinced, but the rest of the Convoy were savvy to the truth. The other Optimuses supported General Optimus Prime's decision, stating that if C-81 had earned the General's trust, that was good enough for the rest of them. Optimus was later seen hanging out with Spy-Eye on his off-time. Cybertron's Most Wanted

By the ‘90s, the genre had begun to fade, and boys' minds turned to more high-impact action, often centered around mutants, monsters, and karate. Hasbro saw potential in the embers of the Transformers brand, and turned it over to newly-acquired subsidiary Kenner for a jump-start. Kenner threw out all the old rules, and invented a line of Transformers that were more poseable, more feature-packed, and more exciting. Backed by a high-tech CGI cartoon, Beast Wars turned the brand around, making Transformers a bestseller again.
"Special Edition" Optimus Prime is a redeco of the Classics multi-pack toy, featuring some minor paint detail changes, bluer translucent plastic, darker and cooler gray plastic, and darker metallic flake red and blue plastic, with his (previously black-only) rifle body most notably now being cast in both blue and black plastic. He came in special "book box" style packaging with black-and-white boxart, and was only available at retail in Australian and Asian markets. North American customers could later buy him via Hasbro Toy Shop.
Armada Built to Rule Optimus Prime transforms into a fair approximation of his vehicle mode, but the robot mode is quite inaccurate, due to the very broad, flat Trans-Skeleton with thin, stick-like limbs attached to it. The set came with a very simplistic "Mini-Con" Sparkplug partner kit that did have a more dedicated "Powerlinx" connector than the standard construction pegs, though these are a bit too thin to be used as attachment points for regular Mini-Cons (they stay, sort of, but it's a very loose connection). The 101-piece set also features pressure-launch missile-firing "smokestack" cannons.
Hot Rod then fought in the battle of Autobot City and saved the city for if he had not attacked Megatron, he would have destroyed it. Due to his attempted intervention in the epic battle between the Autobot leader, Optimus Prime and the Decepticon leader, Megatron, Prime was lethally injured. Before he died, the Matrix got passed on to the Autobot Ultra Magnus, whom he referred to as "old friend", despite protestations.
Optimus Prime led a group of Autobots who left Cybertron aboard the Ark, which was shot down over Earth, sending them into stasis for four million years. Optimus was badly damaged in the crash, and the prognosis wasn't great, but he recovered in time to announce the Autobots had no choice but to involve the humans in their war. Following a battle at Dyson Dam, Prime persuaded Jetfire to join the Autobot team. When the Decepticons headed through the space bridge to Cybertron, Optimus followed, only for him and his team to be ambushed and imprisoned.
The new One-Step Optimus Prime toy transforms from a trailer truck into a robot in just one easy step! The toy features a similar transformation to the other One-Step Optimus Prime and One-Step Changer Movie Hound. The figure is only available as a "Special Edition Figure" in a 6-pack with the One-Step figures of Bumblebee, Steeljaw, Grimlock, Sideswipe, and Underbite, all of which are unchanged from their individual releases. This set was exclusive to Target stores in the United States and to Toys"R"Us stores in Canada.
One more thought: LEGO is a Danish company. The fluctuations in the price of LEGO such as the big bump around 1985-7 in Figures 1 and 2 could be because of a change in exchange rates. The conversion rate between the Danish Kronor and the US$ went from over 10 in 83 and 84 to less than 7 in 86 and 87. LEGO might have been slow to respond to changes in exchange rates, leading to the temporary bump. If you’d like to share data we can redo your graphs in DKK.
Prime is loaded with a ridiculous number of features and accessories. The robot itself is highly poseable, and both the smokestacks on Prime's shoulders and the fuel tanks on his legs can be rotated forward to act as guns, even featuring sculpted detail to this effect. As ever, he comes with a trailer that opens up into his crazy-detailed Combat Deck, featuring more action features than ever before. In trailer mode alone, it features a flip-down support stand so it can stand alone, a spring-loaded pop-out ramp instead of a fold-down one, and when the trailer is split for transformation, the traditional support legs underneath automatically swing out into place. The trailer houses most of Prime's accessories, including his ion blaster (with a moveable ammo clip to allow for multiple poses) and energon-axe, as well as his classic gas pump accessory, now with a poseable wire instead of a rubber hose. Two fold-out compartments provide storage space for six of Prime's interchangeable fists, while the other two remain attached the robot: two clenched, two open, a pointing right fist, a tilted left fist (for holding the ion blaster's ammo clip), and two fists with slots to grip the miniscule Matrix of Leadership that fits in a tiny chamber in Prime's chest. The Combat Deck's artillery robot features two flip-out handles that Prime can grip as if aiming the drone's guns, and Roller is also included, with three different 3mm ports to hold Prime's gun and gas pump. Lastly, Prime comes with a rocket pack like those used by the Autobots in such Generation 1 cartoon episodes as "Dinobot Island", and a stand shaped like the Autobot insignia that allows him to be displayed in mid-air, as if in flight. The rocket pack also has 3mm ports for Prime's weapons, and stores on the front of the trailer in vehicle mode.
Activision and Traveller's Tales, creators of the Lego Star Wars games, released Transformers: The Game in 2007, accompanied by Transformers Autobots and Transformers Decepticons, to tie in with the live-action feature film for the Sony PlayStation 3, Microsoft Xbox 360, Nintendo Wii, Nintendo DS, PC, Sony PlayStation Portable, and PlayStation 2. The player was able to play as both the Autobots and the Decepticons, pick up and throw objects, and transform at any time. The steering in vehicle mode was compared to that of the Grand Theft Auto games and had a free-roaming environment.
With the Japanese Binaltech toy series having transformed into the Kiss Players line, the second figure to be released as a Kiss Players character was Hot Rodimus. Based on the same Ford GT mold as Mirage, Hot Rodimus features several differences from Mirage. First, it has a unique head sculpt, which includes a movable crest to allow a "visor" to be lowered over his eyes, referencing a scene from the animated Transformers Movie during which Hot Rod is on Lookout Mountain. Additionally, it includes a fishing-rod accessory, which can be split and connected in a different configuration to create a tri-barreled arm weapon, reminiscent of Hot Rod's exhaust-pipe blasters. The figure also includes a PVC figurine named Syao Syao and a CD featuring a Kiss Players radio drama. The vehicle mode stays true to the Ford GT's factory color scheme, lacking Hot Rod's signature "flame" detailing, and, like Binaltech, is fully painted. Meanwhile, the robot mode reveals additional orange and yellow body parts, such as the chest, abdomen, arms and hands, as well as flame-like paint applications on the lower arms to link the figure with the original Hot Rod.
The Transformers toyline was created from toy molds mostly produced by Japanese company Takara in the toylines Car-Robots (Diaclone) and Micro Change (Microman). Other toy molds from other companies such as Bandai were used as well. In 1984, Hasbro bought the distribution rights to the molds and rebranded them as the Transformers for distribution in North America. They approached Marvel Comics to create a backstory with names and short descriptions for each character, most of which were written by Bob Budiansky.
The Transformers: Prime toyline hit shelves in November 2011. Originally, Hasbro played coy with the series receiving a toyline at all, emphasizing that it was a television series first and foremost. There were initial plans to release a small assortment of three Deluxe figures (Bumblebee, Arcee, and Starscream) in the Generations line before they were moved into the expanded "First Edition" launch line.
Limited to 10 pieces, this gold chrome redeco of Evasion Mode Optimus Prime is released as part of the Transformers Battle Command Campaign given away to ten winners via a lucky draw. The initial phase for entry was operated in July 2014, when those wishing to enter the draw had to mail in the proof of purchase from the Takara-Tomy Lost Age Optimus Prime. The actual mailing out of prizes was to take place in November 2014.
This. Is. Awesome. I remember running LEGO piece auctions ~1998/99 on RTL (rec.toys.lego) then later my own website. I’d buy sets at Walmart and other places on discount, break them out, and sell the pieces as lots. I knew I’d always make good money if I could average < $0.10/piece cost (ideally around $0.07) and sell for $0.15 – $0.20+ … fun times!
This playset is a variation of Optimus Prime's dinosaur mode, but as a figure-8 racetrack. A launcher can propel Flip Racers through the track where they can activate a popup Chase and land in a jail. The Flip Racer MorBot is included but any Flip Racer is compatible. The raceway can be extended by attaching the Flip Racers launchers: Bumblebee’s Quick Launch Garage or Airport Blastoff Blades (sold separately).

In one of his less impressive moments, after running out of ammo during a battle with Deathsaurus, Optimus Prime ordered his fellow Autobots to improvise and hurl everything that wasn't nailed down at their enemy. This included the Blackball, unfortunately. Catching it, Deathsaurus began to fantasize about his inevitable galactic conquest, all the while being pelted with rocks and litter. Frustrated, Deathsaurus accidentally hurled the Blackball back to the Autobots in a fit of rage. Good Job! Deathsaurus!!


A very limited number of Gold Masterpiece Convoy figures were given away in a Lucky Draw contest in Japan. The figure uses the same design as Masterpiece Convoy, but every piece, including the windows and weapons, is cast in a gold color, reminiscent of his electrum coating from the episode The Golden Lagoon. The only exception is the tires, which remain black rubber. It comes packaged in the usual Masterpiece Convoy box, with the only telltale sign being the gold lettering in the "Master Piece" label. It's not clear how many were made, but it is thought to be no more than 10 or 20.[1]

The figure would have come in a monochrome version of the standard Henkei! Henkei! Convoy's packaging, still named "Convoy" but now labeled as part of the Gentei! Gentei range of exclusives.[8] Reportedly, this figure was intended as a Wonderfest exclusive, but was canceled because, according too TakaraTomy designer Shogo Hasui, it was too similar to Universe Nemesis Prime. Knockoffs were later made available, so buyers beware!


Optimus Prime was one of three Transformers characters immortalized in Gummy Candy form by the Frankford Candy & Chocolate Company. Released during the time when Classics had just replaced Cybertron on the toy shelves, Prime's candy depicts him in his Cybertron body, alongside Generation 1 Bumblebee and a kooky Cybertron/Classics Megatron cross-breed. The candies were all sold individually in blister bubbles.

Part of the seventh wave of Robots in Disguise Warrior class lineup, and the first of the Mini-Con Weaponizers subline, Power Surge Optimus Prime is a retool of the original Warrior Class Optimus Prime figure, now transforming into a 6-wheeled futuristic trailer truck. Optimus now also comes with a pair of swords, which can be attached to his 5mm-compatible hands or the top of the truck/back port to serve as the robot's wings. Most notably, Power Surge Optimus Prime features retooled truck hood/shoulder parts to makes the hands more evident. As a retool of the original Warrior Class Optimus Prime toy, he retains his axe accessory, albeit unpainted just like the Clash of the Transformers Warrior Class toy's. His light blue-colored Launcher can be attached onto his collar.

A Supreme sized version of Optimus Prime, based on the Voyager class figure design.[153] When pushed forward, the upper torso spins and transforms, with the transformation sound indicating the completion of the process. The right arm has an axe-swinging action while the left arm has a punching action. Includes show-accurate battle axe that features retractable blades and a spinning jet flame. Also features sound effects and pre-recorded dialogue ("My name is Optimus Prime!", "Let's go!" and "Bring it on!"), as voiced by David Kaye.
The term Generation 1 is a retronym; the series was simply known as "Transformers" until the release of the Generation 2 series. However, the term has become semi-official, as both Hasbro and Takara have referred to this era as "Generation 1". New characters are still occasionally added to the line, primarily by E-hobby. (Examples: Sunstorm, Hauler, Detritus, and the like.) Large-scale production of new characters in this line ended with the onset of Generation 2. Transformers fans often are very upheld with the G1 community. This has led to controversy among fans who consider G1 to be the only "pure" form of Transformers.

Honestly, all the charts were done in Excel. I tried other methods but that was the easiest since all my data was in excel already. They are X,Y Scatter plots with sooth lines – heavily tweaked. Made the lines thicker which makes it look smoother and changed the layout a bit to make it clearer. The Excel defaults are ugly but if you spend enough time tweaking them you can get something passable.

One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
Jazz and Ironhide reported to Optimus that the Decepticons were stealing gas, and Optimus was able to use Roller to find out the Decepticons were using a molecular transfer device. The Autobots assaulted the Decepticon stronghold so they could take care of the device. Summertime Coloring Book After a rain storm, Optimus and most of the other Autobots went out on patrol. When the Decepticons used a fake message to lure Bumblebee out of the Ark so they could take it over, Optimus used the same gambit to retake the ship. A Message From Outer Space

Optimus battled alongside the Alternity to fend off the beast, when unexpectedly, Megatron overwrote the beast's higher functions with his own. At first, it seemed that the Hytherion had been killed, but a newly empowered Megatron (in two bodies) appeared and declared that, now possessing a power that rivaled the Alternity's, he challenged his opponents to take him on or see the multiverse itself burn. To Mega Therion
A Voyager class figure that transforms from semi-trailer truck to robot. Head features retractable face plate. The figure's main gimmick is a spring-loaded mechanism that spins the lower torso during transformation to robot mode. Trailer detaches and transforms into a giant Ion Axe or jet pack. Prime's gun can be filled with a small amount of water. Some variants of the figure come with the Autobot symbol printed on his left shoulder while others do not.

Like Chomp & Stomp Grimlock, his truck kibble from the back can accommodate One-Steps and Power Battlers (Both Hasbro and TakaraTomy), activating his various voice clips and flashing lights by interacting with the magnets in their feet. He is notably less kibbly than other AOE Optimus Primes...from the front, at least. The back and sides are not so promising with large chunks of Western Star truck kibble hanging off his legs, making him look as if he's wearing a petticoat. At least the jetpack helps balance the whole thing out....

While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth, picking up one year after the events that saw Optimus Prime's return to life.

The Beast Wars raged on prehistoric Earth, eventually leading to the discovery of the buried Ark sometime after its crash on prehistoric Earth. Megatron, following his namesake's instructions in a desperate gambit, decided to attempt to change history by killing Prime, who was still lying in the Ark in stasis lock. Megatron hoped that this would result in the Decepticons winning the Great War and eventually Predacon control of Cybertron. Megatron unleashed a full-power weapon blast at Optimus Prime's face, near-fatally injuring him. The Agenda (Part III) However, Optimus Primal proceeded to take Prime's spark into his body to protect it from surgical trauma while his injuries were repaired. The subsequent power increase caused by Prime's spark's connection to the Matrix mutated Primal into a large, Transmetal "Optimal Optimus" form. Then, with the repairs complete, Prime's spark was restored, and he briefly activated before sinking back into normal stasis. Optimal Situation


On a mission with the Triggerbots to stop Megatron from claiming the Underbase, Prime was forced to jettison the massive databank into space to prevent anyone from acquiring its power. With this action, he proved his wisdom and skill to the Autobot Council of Elders. He continued to move up in rank, eventually becoming the field command over the Autobot armies.
Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.
As Megatron explained that the Matrix was giving them a vision of the future, they witnessed themselves battling on Sherman Dam. The nature of their surroundings established, Megatron resumed the scheduled beating, but a series of setting shifts ended with Optimus reunited with Grimlock. Grimlock handed Prime a sword and suggested he finish Megatron for good. The War Within #5 Optimus found Megatron again, engaging him in combat and announcing that he was playing the game by Megatron's rules now—without mercy. Though he did not slay Megatron, he inflicted enough damage onto him to expunge from his memory the visions the Matrix had granted him. A short time later, Optimus joined the other Autobots in attacking the Decepticons who were trying to use Cybertron's planetary engines. Grimlock was finally impressed with Prime. Thanks to the combined efforts of Optimus and Grimlock's squad, the Decepticons were driven away and the engines were destroyed before they could tear the planet apart. Afterwards, Optimus's group arrived back at Iacon to find it destroyed. Optimus announced the Autobots were no longer evacuating the planet and threw away the Golden Disk full of the knowledge of his predecessors which the council had given him, saying he would choose his own course. The War Within #6
This miniature model kit of Energon Optimus Prime comes unassembled and unpainted, moulded mainly from white, red and black plastic and featuring some stickers for essential detail. Standing at around 4.5 inches tall, he comes with his Prime Force drones and can combine with them in the usual ways; while Fire-1, Gyro-2 and Digger-3 are moulded in their normal colours, Submarine-4 is stuck being black, and like every other non-color-molded, non-stickered detail on the kit, must be painted by the buyer. Prime's transformation involves removing his feet and head (an alternate Super Mode head is included, as his antenna does not transform into a helmet), and he does not come with a trailer for the Prime Force, but his gun can shoot small orange plastic BBs via a pressure-launching mechanism, and he comes with a small gold-chromed Energon star that fits onto his left shoulder. The kit also comes with "Episode 1" of the "Optimus Prime VS Scourge" mini-comic, printed on the back of the instructions.
It took two further years, but this figure was eventually released as part of the Japanese counterpart to the Alternators line (Binaltech) in 2008. Binaltech Convoy features some additional paint details, like his silver pelvis, additional patterns on his shoulders, and red paint on his engine-gun, and like all Binaltech figures, he also includes die-cast metal pieces. Unlike previous Binaltech releases, a bio-card was not included.
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More
A redeco (or should that be de-deco?) of the Grand Convoy Super Mode Pla-Kit, Grand Convoy Super Mode White Version was available exclusively on July 17th and 18th at the Japanese convention, Kodansha Super Chara Festival 2004 ("K-Fest"). It is a solid white version of the normal model kit, possessing all the features of the normal figure, which was intended to be used in a customization/painting contest held at the convention. It lacks the comic of the normal release.
The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of sideways-opening windows, akin to Masterpiece Prime. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on Diablock Convoy's shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.
Standing only two-and-a-quarter inches tall, Smallest Transforming Transformers Optimus Prime was the smallest fully transforming G1 Optimus toy for a while, at least until the release of his chubby super-deformed Q-Transformers versions. He features an accurate transformation sequence based on the original full-sized toy, replacing the detachable hands with actual sculpted fists, and even including a tiny version of his laser rifle. Unsurprisingly, he also has little articulation and is only capable of moving his arms and legs.
What I find more interesting is who’s in this wave. Not only is there Hot Rod and Barricade in ’80s muscle car form, but Optimus Prime in his red G1 Peterbilt truck form (just with movie Optimus’ head! Maybe Bumblebee will explain the origin of his “rip off everyone’s face” fetish). Two versions of Bumblebee round out the wave, his traditional movie-verse Camaro and G1 VW Bug.
What I find more interesting is who’s in this wave. Not only is there Hot Rod and Barricade in ’80s muscle car form, but Optimus Prime in his red G1 Peterbilt truck form (just with movie Optimus’ head! Maybe Bumblebee will explain the origin of his “rip off everyone’s face” fetish). Two versions of Bumblebee round out the wave, his traditional movie-verse Camaro and G1 VW Bug.
Alternatively, the Autobots could concoct a plan where Optimus would pretend to allow himself to be taken prisoner, per Buddy’s suggestion. The Decepticons, fooled into thinking they’ve won, took Optimus Prime into their base. Having hidden his troops inside his trailer, Optimus and the Autobots then led a surprise attack on their unsuspecting foes.
When Starscream attacked a power plant with the aid of his brainwashed ally, Skyfire, Prime carried Grimlock to the scene of the battle on the back of his truck mode. The Enemy from the Arctic During the conflict that followed, Prime's suspicions about Wataru were confirmed when the boy manifested a barrier to protect himself and Bumblebee and to help Skyfire overcome the influence of Starscream's mind-controlling helmet. Wataru was a Booster as well! Wataru's Power His past experiences naturally made Prime hesitant to put Wataru's power to use, but Osamu Kihara made the point that Wataru's power was invaluable for hunting down shards of the Energon Cube. Prime and Wataru headed out to investigate a local relic that Kihara suspected was a cube shard, and Wataru's powers soon confirmed the doctor's findings. Just as Prime was about to report back to Kihara, however, Megatron struck, demanding that Prime hand over both the shard and Wataru. Prime attempted to feign ignorance of Wataru's powers, but Megatron ignored his bluff and encouraged him to hand the boy over, lest he cost another Booster their life. Driven into a rage by the stinging barb, Prime violently attacked Megatron with his energon-axe, but as the duel raged, Megatron continued to question Prime's beliefs and his attitude. Unable to deny Megatron's accusation that he had hoped to use Wataru's power to defeat him, Prime lost his concentration and was taken down by the Decepticon leader. Despite what he had learned about a previous Booster dying, Wataru stayed true to Optimus and activated his powers, healing the Autobot's wounds and powering up his energon-axe into a huge sword. Summoning all his energy, Prime took down Megatron with one almighty slash, then collapsed into stasis lock. Optimus Prime's Secret
A gold chrome remold of the 2007 movie Leader Class figure by Hasbro Hong Kong. Limited to 88 units, with only 10 released to the public at the 2008 Animation and Comic Show convention; all of which were sold only to the first 10 people to spend more than HK$3,000 at the Hasbro booth. Because the figure is permanently fixed to the trophy base, it is no longer transformable.[131]
Bumblebee, being the popular character he is, was one of the first five characters inducted into the Hall in 2010, during a ceremony at BotCon; the convention for all things Transformers. He was joined, not surprisingly, by other super-popular transformers: Optimus Prime, Megatron, Starscream, and the Dinobots. Humans enshrined in the Transformers Hall of Fame over the last few years include everyone from director Michael Bay to Peter Cullen (the iconic voice of Optimus).
"Cybertron Optimus Prime" new features a darker grey plastic, and mostly shares the same paint mask to the original Deluxe class figure, with added paint details on his head and the mesh-like pattern on the front of his "entry" mode. The silver paint on his chest was slightly changed from the original and he lacks the paint on his feet, his "headlights", and the top of his "entry" mode. Lastly, he features Cyberglyphics on his vehicle mode windows, and the rear sides of the vehicle. His flame attachment is now cast in translucent red plastic with orange sprays.
Like some other Legends/Legion Class toys, several of the loose units were dumped in some Hobby Shop dealers in Asia, although this one is very likely to be an identical knockoff of the toy. While the paint applications are pretty much identical to the real deal, the pegs on the legs/trunk front can be a little too tight when attached. in some worst cases; it can break off if attempted to pull off by force.
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.
×