This playset is a variation of Optimus Prime's dinosaur mode, but as a figure-8 racetrack. A launcher can propel Flip Racers through the track where they can activate a popup Chase and land in a jail. The Flip Racer MorBot is included but any Flip Racer is compatible. The raceway can be extended by attaching the Flip Racers launchers: Bumblebee’s Quick Launch Garage or Airport Blastoff Blades (sold separately).
Another redeco of Deluxe-Class Dark of the Moon Prime, this release uses a darker grey, a less magenta-y red, and less gold on the front end. Included is the trailer originally available with the Chronicle release. The trailer holds up to seven MechTech or similar 5mm peg accessories. Four holes are located on the top-front end of the trailer, with another three inside. The door also folds down to become a ramp, and the inside of the trailer is big enough for several Legion or Commander Cyberverse toys, or one smaller-end Deluxe figure. Two C joint bars also run along the bottom of both sides.
Very well written piece. It is very expensive, but as seems to be the trend on here, I would agree you are paying for the quality with LEGO. I like that they have provided the opportunity for adults to build sets with the LEGO Modular buildings range, those sets use real architectural techniques in their construction and are really quite impressive.
Alternity Convoy transforms into a 1:32 scale Nissan GT-R, featuring die-cast metal parts, an opening hood, trunk and doors, as well as an interior, complete with his feet and thighs being sculpted to form the back seats. This complex figure stands at 6.5" tall, and is armed with a pair of blasters on each arm. In the hyper-dimensional world of the oft-confusing Alternity fiction, this figure specifically represents the Optimus Prime of universal stream Primax 903.0 Beta.
Power Surge Optimus Prime's scannable Autobot insignia is on his robot mode left shoulder. As he's packaged in robot mode, this badge is easily scannable while still in-package. Like his wavemate Bumblebee, this figure eventually saw release in the 11th wave of the Warrior Class line with the "Combiner Force" packaging. His scannable sticker is also altered, but scanning the badge only unlocks Energon currency, but not the character. This also applies to the original release's badge, but it unlocks 8 Ultra Sparks instead.
Then he dreamed of awakening, only to find his troops smashed. Realizing his only hope for survival lay with Cybertron, Optimus then boarded the ship the Autobots were repairing, and travelled back to his home planet. Arriving on Cybertron, he found it completely under Decepticon domination. Optimus then met an old Autobot codger who pleaded that he return to Earth to gather a force that could overthrow the Decepticon’s regime. Optimus remorsefully told the old Autobot that there could be no reinforcements from the planet Earth. The two Autobots were then swarmed by Decepticon police officers, who Optimus fought until his dying breath…
Prime filled one of the chase figure slots for the tenth wave as well. This rare figure was the same as the regular Super Mode PVC, except instead of wielding his Convoy Gun, Prime was armed with the Star Saber sword. As with the previous chase figure, it could only be found in one out of every ten cases, and took the place of the full-colour Prime figure in that assortment.
This highly accurate model kit of Optimus Prime is a Japanese exclusive. It is extremely possible, and comes with his two swords that can be mounted either on his fore-arm, or the hand can be removed and it placed in the wrist via ball joint. His appearance is based on his Dark of the Moon look, as it his "Abbs". The head can be made either with the face-plate on or the face-plate of which reveals a detailed face. Interestingly though, he doesn't come with any of the guns he uses in the films, though it is thought he can hold Buster Prime's gun.
Prime's cab and trailer can also combine to form a super robot mode. Transforming the cab into the torso portion sends the transformation command to the trailer, which raises itself up off the ground to become a pair of immobile, statuesque legs (as long as you're not playing with it on carpet), and when the pair are connected, the super-robot head pops up with a metallic shriek sound effect. Pressing the Autobot symbol on the figure's chest activates a pulsing laser sound effect, and the small grey button on his right shoulder illuminates his fist with a red LED, which can illuminate either of his guns, as well as the Star Saber sword (the Star Saber was specifically cast in clear plastic for this purpose, but in practice, the light failed to carry even halfway up the blade).
Not depicted in the instructions or stock photos, Roller can attach to Prime in vehicle mode via two tabs on the vehicle front which slot into two corresponding slots on Prime's feet. Another undocumented feature is that the butt of the Ion Blaster can be inserted between the barrels of Roller's weapon mode to form a longer weapon. Also not shown in the instructions but depicted on the stock photo on the card-back is that Prime's shoulderpads can be rotated up; the intended positioning for this is notched, although you can position them at other angles.

In the Cybertron universe, Cybertron was under attack by two of the Heralds of Unicron, Nemesis Prime and Ramjet. They had already damaged Alpha Trion, and while Ramjet engaged Vector Prime in a duel high above Cybertron, Nemesis Prime got past Sentinel Maximus and revealed his plan to use the Dead Matrix to drain Primus and use the energy to revive Unicron. Omega Prime, a combination of Optimus Prime and his brother, Ultra Magnus, appeared to challenge Nemesis Prime. The brothers recovered, only to receive Optimus Prime, bearing word of Vector Prime's death in battle. Prime and Magnus were subsequently seen planning the hunt for Unicron with Sentinel Maximus.[40]
Kiss Players Convoy is a redeco of Alternators Optimus Prime. Unlike the Alternators version's bare red plastic, he is covered in a deeper red paint. Some of his body parts are cast in different colours, such as his shins, and has a much more intricate paint deco based upon Masterpiece Convoy. He is armed with his small engine pistol and a pink surfboard that can be reconfigured into either two small blades or a large double-bladed sword.
A Voyager-class two pack of Classics Optimus Prime, representing the Generation 1 version of the character, and a redeco of Age of Extinction Evasion Optimus Prime representing the Movie character (The deco patterns is most likely to emulate the character's design in 2007, with vague results). Like Rusty Optimus Prime (seen below), he features flames on his vehicle mode doors.
Sold by Hasbro Toy Shop at various conventions, Pepsi Optimus Prime is a repackaging of a virtually unaltered 2005 Japanese Pepsi Convoy. (Again, his stacks are shortened for safety reasons.) However, this U.S. release is, officially, a different character. Whereas the Japanese release's bio explicitly identifies the product as a separate character from Convoy (created with help from NASA, no less), the U.S. bio conversely indicates that their version of the character most definitely is Optimus Prime. His motivation for schilling Pepsi is, apparently, that he wanted a new disguise but basically couldn't be arsed to actually reformat into a new altmode.
This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.

Prime's cab and trailer can also combine to form a super robot mode. Transforming the cab into the torso portion sends the transformation command to the trailer, which raises itself up off the ground to become a pair of immobile, statuesque legs (as long as you're not playing with it on carpet), and when the pair are connected, the super-robot head pops up with a metallic shriek sound effect. Pressing the Autobot symbol on the figure's chest activates a pulsing laser sound effect, and the small grey button on his right shoulder illuminates his fist with a red LED, which can illuminate either of his guns, as well as the Star Saber sword (the Star Saber was specifically cast in clear plastic for this purpose, but in practice, the light failed to carry even halfway up the blade).
Realizing that the planet is dying, Optimus orders a mass evacuation of all Autobot cities, but many transport ships are destroyed by the Decepticon satellite Trypticon, under orders from Megatron that no one shall leave the planet. He orders the Aerialbots Jetfire, Silverbolt and Air Raid to fly and destroy Trypticon. The aerial trio manages to destroy Trypticon's jet pack and send the Decepticon behemoth crashing into Cybertron, where Optimus Prime and the Autobots band together to narrowly defeat him, sending him plunging into a pool of raw energon. Optimus and the remaining Autobots volunteer to stay and defend Cybertron from Megatron for as long as possible while the rest evacuate the planet. He commissions a massive vessel known as "the Ark" to transport the remaining Autobots into space when the time comes.
On a Cybertron dominated by Shockwave and the Decepticons, Optimus Prime and the Autobots took on the roles of resistance fighters. Cobra experimentation transported a contingent of Cobras and G.I. Joes to Cybertron and destabilized Teletran 3, which led to the computer sending several Transformers to Earth across different time periods. When Optimus Prime saw Jazz get zapped by Teletran 3, he leapt to rescue his soldier, only to be transported away as well. G.I. Joe vs. the Transformers II #1 A team made up of Joes and Cobra agents were sent back and found Optimus Prime and the Stunticons in 1930s-era Chicago, disguised as period cars and trucks. The Stunticons chased Prime and the Joes around the city until everything was wrapped up with bullets, a collapsed bridge and some dynamite. G.I. Joe vs. the Transformers II #2
In lieu of combining with the Prime Force, Optimus Prime can also merge with Energon Wing Saber in a similar fashion, with Wing Saber splitting into four components that connect to Prime as limbs. Wing Saber's red and white torso components can become arms for Prime while his legs attach to Prime's own, creating Prime's "Flight Mode", but the parts can also be swapped around, with Wing Saber's legs deploying large missile launchers and becoming arms to make Prime's "Fight Mode". Alternately, Prime can combine with Energon Omega Supreme to form what his packaging calls "Powerlinx Omega Supreme", but which the cartoon named "Optimus Supreme". The Prime Force drones can attach to four connectors on Optimus Supreme's body.
An additional oddity is that unlike every other toy in the Go! toyline, Optimus Exprime came packaged in a box without a window. This is potentially because of the sheer amount of information TakaraTomy wanted to print on the box, or because they were unable to fit him into the box in robot mode with all of his accessories displayed. Whatever the reason, it left him with a smaller box than the other voyagers in the line, a substantially-altered box layout, and a much shorter profile.
Main event time! Nitro figures are more like your traditional Generations/Power of the Primes deluxe bots. Standing at 7-inches, they feature increased detail, additional paint applications and all come with a core to unlock additional features. In addition to Barricade, Optimus Prime, and VW Bumblebee (this one’s my favorite of the entire line), the Nitro series will also have a Camaro ‘Bee.
Limited to 10 pieces, this gold chrome redeco of Evasion Mode Optimus Prime is released as part of the Transformers Battle Command Campaign given away to ten winners via a lucky draw. The initial phase for entry was operated in July 2014, when those wishing to enter the draw had to mail in the proof of purchase from the Takara-Tomy Lost Age Optimus Prime. The actual mailing out of prizes was to take place in November 2014.

During a Decepticon attack, Cliffjumper pleaded with Optimus to let him jump into the fray. Optimus denied his request, telling him that they already had the Decepticons on the run. In the battle’s aftermath, the Decepticon’s activity seem to vanish altogether. Grateful for the quiet, Optimus decided to head out and fetch extra fuel for the Autobots with Sparkplug. He returned just in time to find his Autobots in the middle of a battle with the Decepticons. With Sparkplug and Prowl’s help, Optimus refuelled his troops, and once more drove the Decepticons back. Revenge of the Decepticons

Optimus Prime appears in the Transformers live-action film series as the leader of the Autobots and one of the main protagonists. In the first three films, he is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he gains a first generation-style trailer form before changing into a 2014 Western Star 5700 Concept.[29] Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.
Optimus Prime was the central figure of Kabaya's final Cybertron candy toy series, Change Galaxy, which was themed around his combinations with Leobreaker and Wing Saber. In addition to being transformable (again, through partial disassembly), this figure of Prime combines with the Change Galaxy versions of his partners, forming Savage Claw Mode and Sonic Wing Mode. Prime himself came packaged with an alternate Super Mode head and his leg armour in order to complete his appearance in each of these forms. Additional Super Mode pieces were not created for this line, as that wasn't the point.
Optimus pondered Sunstreaker's whereabouts after noticing that he had been absent from Autobot headquarters for longer than expected. The answer came through Blaster, who relayed a message from Megatron; Sunstreaker was the Decepticons' captive. Megatron demanded that the Autobots surrender, or else Sunstreaker would be destroyed and rebuilt as a Decepticon! The Autobots refused to give up without a fight, but Optimus took care to explain the threat they were up against before a rescue party headed out. Optimus told Sideswipe, Slag and Sludge of Devastator's combiner nature, and warned them not take the danger he posed lightly. The rescue squad failed in liberating Sunstreaker, and were captured themselves. The Autobots were shaken by this turn of events, but Optimus was able to think up a new plan to trick the Decepticons. He ordered his Autobots to build a hollow statue of Devastator for him and his soldiers to hide within. Optimus then wrote a letter explaining that the statue was a peace offering for the Decepticons, and the completed decoy was placed before the Decepticons' base. The ruse worked, and Optimus and his troops burst forth from the false Devastator after the Decepticons had let down their guard. An all-out brawl between Autobots and Decepticons followed. The fight came to an end when Megatron attempted to down Optimus with his fusion cannon, only for Optimus to deflect Megatron's beam back at him by bouncing it off a reflective piece of metal. With the Decepticons defeated, Optimus ordered his troops to retrieve their wounded and return to Autobot headquarters. The Autobots' Secret Weapon 

Though the figure does a much better job of conveying the on-screen character model than the ROTF Leader Class mold did, there are still a few inaccuracies—most notably the forearm and shoulder pad designs and the head/torso proportions. The final product also lacks certain paint details visible in stock and packaging imagery, such as the blue rings on his feet and the gold on his pelvis. It should be noted that this mold does not combine with Jetfire.
Prime's new trailer is essentially a heavily armed version of the original, with two double-barreled heavy laser cannons mounted on two arms with visible fists. The rear has a fold-down ramp to allow the storage of a smaller transformer, or perhaps spare accessories. The trailer can be transformed into a Powermaster battlestation that can allow other Powermaster engine figures to man the heavy laser cannons.

The Optimus Prime Battle Rig Blaster transforms from a superdeformed amalgamation of his Movie truck and G1 Optimus Prime's truck (indeed pulling G1 Prime's trailer) to a fully G1 robotic forearm and hand with a built in Nerf style gun. By simply placing your hand inside the back of the trailer (I need an adult!) and pulling back on the front of the truck, the gun transforms and folds back into a weapon. It comes with three Nerf N-Strike size whistle darts which can be stored inside the trailer. Although not shown in the image, the truck front splits in half in gun-mode, while the grille acts as a sight. This toy was marketed as 'Optimus Prime Big Rig Blaster' overseas.
What makes LEGO sets seem more expensive now is that the effective piece count seems lower. I remember that in the 80s, each set was full of bricks that were not overtly specialized only to that set. So they were useful for more things. Now the sets usually come with less bricks and plates (things that could be useful everywhere) and bring more things like minifigure accessories, flick fire missiles and other things that are not that useful. Although I think that everything was far worse in the late 1990s/Early 2000s than it is now.
This redeco of the Dark of the Moon Voyager Class Optimus Prime figure features a really unusual deco pattern consisting of red transparent tires, the vehicle front grill and fuel tanks (the fenders remained opaque red due to unpaintable plastic). Some of his parts like the vehicle front hood and the truck roof features a pattern similar to the ones used for the Tech Specs in the Generation 1 toys. He features a new sword and shield accessory, which can be used to decode the patterns.
Part of the first wave of Siege Voyager Class figures, Optimus Prime transforms from robot to short-smokestacked Cybertronian armored truck and back. He includes two weapons compatible with the C.O.M.B.A.T. System—the "W-50 Dual-Mech Energon Strikeshield", which is an axe that transforms into a shield, and the "W-M3 RF Ion Blaster". Both weapons can combine to form the "Sentrystrike Ultra-Blaster". Optimus Prime also features "battle damage" paint applications on several parts of his body, as well as multiple hardpoints all over himself and his weapons to accommodate "Fire Blasts" from the Battle Masters assortment, which can be used to simulate blaster fire or explosions.
Nearly all the chrome is worn off, the tips of both smokestacks are broken, the fists and guns and voice box are long gone, there's a huge chip of plastic broken off one of the shoulders. I still have the trailer, but it's also broken in a few places. The door is gone. The spring-loaded gimmick doesn't work anymore. The repair drone broke off entirely near one of the joints on the main arm and was thrown away many years ago.
At some point, Rodimus learned that the world known simply as Planet Q was under threat from the world-devourer, Unicron, but arrived too late to prevent its destruction. Years later, however, he encountered the planet's surviving ruler, Alpha Q, and sided with him in his plan to use Energon to regenerate and restore all the worlds consumed by Unicron – a plan that put him in opposition with Optimus Prime when they encountered each other once again. When Megatron succeeded in reactivating Unicron, however, Rodimus relented and submitted himself and his troops to Optimus Prime's command, and they were integrated into the main Autobot force as the battles continued to defend Alpha Q's successfully-regenerated worlds against the Decepticons.
This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.
In just seven years, from 1997 to 2004, the number of elements in the company’s inventory exploded, ascending from slightly more than 6,000 to more than 14,200. So did its range of colors, which climbed from the original six (red, yellow, blue, green, black, and white) to more than fifty. As the number of components and colors mounted, soaring supply and production costs plundered the company’s bottom line. Here’s why.
Of course, many voice actors have voiced him in different TV shows and video games over the years, in both English and Japanese. Most notably by a Power Rangers actor and a Batman voice actor. The latter is Will Friedle, who voiced Bee in the most recent series, Robots in Disguise, plus cameos in Rescue Bots, Transformers Prime, and the Predacons Rising TV movie. Friedle is well known as Batman’s voice in Batman Beyond. As for the Power Ranger, that would be Johnny Yong Bosch, who played Adam Park, the original Black Ranger. Bosch was Bumblebee’s voice in the video game Transformers: War for Cybertron.
After the Great War, Optimus Prime disappeared with other legends into the mysterious location on Cybertron dubbed J'nwan, where Optimus himself became the "Authority" who spoke on behalf of the others. Sandstorm, the leader of a rebellion in a 32nd-century firmly under the heel of the tyrannical Shokaract, entered J'nwan to plead with the heroes of Cybertron's past for aid. He hoped to convince them to join the fight against the Predacon warlord. After a mind-crushing journey which left all of his companions dead or deranged, Sandstorm finally found an audience with the Authority and his brethren, but they declined to help, with the Authority stating that their time was past and the war was no longer their war. The Authority then in some way manipulated Sandstorm's trip out of J'nwan such that it was comparatively short and simple. Paradox

An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
Available exclusively at the Tokyo Toy Show 2012 (along with Prime Shining Optimus Prime), Black Optimus Prime is a very minor redeco of the previously unreleased Gentei! Gentei! black version of Henkei! Henkei! Convoy, itself a redeco of the Classics Voyager Class toy. As such, Black Optimus Prime is mostly cast in black plastic, with some gray parts, translucent red windows and teal paint operations.
Hot Rod is often portrayed as energetic, yet brash and headstrong, with an overwhelming self-confidence that borders on arrogance.[1] As Rodimus Prime, leader of the Autobots, he is significantly more mature, physically powerful and instilled with the wisdom of the previous holders of the Matrix of Leadership. In a reversal of his behavior as Hot Rod, Rodimus is plagued by lack of confidence in his role as Autobot commander and often doubts his own decisions, feeling both inferior to and in some ways living in the shadow of the previous leader of the Autobots, Optimus Prime.
Though Prime's ultimate fate is unknown, in a story entitled "The Last Days of Optimus Prime", also from Transforce, Prime laments the new Transformers age without war and passes on to a Transformers afterlife, referred to as "J'nwan". The story is vague, however, and may be a metaphor for Prime rejoining the Matrix, as his time had come. In this realm, he was approached by the Predacon Sandstorm, who tried to plead for the help of Prime and the other legendary Transformers in dealing with a Unicron/Predacon hybrid named Shokaract. Prime refused, but later led a group of Transformers, including Megatron, Grimlock, and Soundwave), to distract the creature while Primus dealt the final blow.
In 2017, the Jazz action figure from the "Power of the Primes" line featured printed in Cybertronian alphabet "MAGA", an acronym for the phrase "Make America Great Again" most notably associated with Donald Trump and Alt-right. A spokesperson for Hasbro responded to io9 about the issue and stated that it was inserted onto the figure by one of their vendors and would address it with them.[4]
Over the course of the next twenty years, the Decepticons succeeded in seizing control of all of Cybertron, forcing the Autobots to operate from their new city on Earth and two bases on Cybertron's moons. In the Earth year 2005, Prime, stationed on Moonbase One, dispatched troops to Earth to acquire energy for an upcoming strike on Cybertron. The Decepticons, however, got wind of the plan and used the shuttle run to attack Autobot City. A distress call summoned Prime and support troops to Earth. In the fearsome, ensuing, epic battle with Megatron, Optimus Prime sustained fatal wounds, but not before turning the tide of battle and forcing the Decepticons to flee. Despite the efforts of Perceptor, Optimus Prime went offline after passing the Matrix and role of leader to Ultra Magnus. His last words were "Until that day... 'till all are one." The Matrix later fell into the hands of Galvatron, a recreated Megatron, and was finally taken back by the young Autobot Hot Rod, who became Rodimus Prime after bearing the Matrix. In season 3, set a year after the events in The Transformers: The Movie, Rodimus was the new leader of the Autobots.
Optimus Prime is armed with two large rifles formed out of a combination of both smokestacks and fuel tanks. These rifles peg into lower arms with grips for his open hands. The under-slung fuel tanks can fire spring-loaded projectiles. In vehicle mode, both smokestack rifles can be deployed as twin cannons, and this mechanism can also be used to store the rifles and deploy them as shoulder guns in robot mode.
This release is another redeco of Cyberverse Optimus Prime, this time with a predominately navy scheme with black accents (which vaguely resembles his Generation 1 colors), and a pair of barrage cannons that can be either held or mounted on his smokestacks, as well as a pair of handheld swords. He is compatible with all his previously released Cyberverse accessories, but not all at once.

In Transformers: The Last Knight, he is brother-in-arms with Bumblebee who he fought alongside with to foil the Nazi Party in World War 2. He speaks with a thick French accent due to being stuck in France for so long, much to his own embarrassment. He wields a special gun which can briefly slow down time. He is also the only Transformer who is shown to speak in vehicle mode. [20][21]

Takara's version of the figure was released in their markets slightly earlier, as the first of what would come to be several installments in their Masterpiece line. In addition to coming with a cardboard trailer that the buyer could assemble to "complete" Prime's truck mode, Takara's release differed from Hasbro's by featuring longer smokestacks (kept short on the Hasbro version for safety reasons, but incorrectly shown to be long in the stock photography shown at right), and lacking the black scorch-marked "battle damage" paint applications Hasbro included on the figure's shoulders, wrists and abdomen.

© Andrew Sielen and Reality Prose, 2013. Unauthorized use and/or duplication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Andrew Sielen and Reality Prose with appropriate and specific direction to the original content.
Available exclusively from Japanese clothing company A Bathing Ape in 2014, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a green color scheme matching the Convoy Reissue BAPE Ver. of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.

Platinum Edition Optimus Prime was only available as part of a 2-pack with Megatron, named "One Shall Stand, One Shall Fall" after Optimus Prime's famous line in the movie. In the United States and Canada, this set was officially released as an Amazon exclusive. It was also available in several of Hasbro's Asian markets (namely the Philippines and Singapore; it's currently unknown whether it was exclusive to any particular stores there or not). In Australia, it was sold at Myer stores, whereas in the United Kingdom, it was both sold at Toys"R"Us stores and available via Tesco's website (but never found in stores). Surprisingly, it was (and still is) a common find in Brazilian online stores.


Part of the third wave of Prime Cyberverse Commander Class toys, Nightwatch Optimus Prime is a redeco of Series 2 Cyberverse Optimus Prime, using the faceplate-less head sculpt that is gang-molded with the original head. His blue plastic is now gray, his smokestacks and thighs are left unpainted, he loses the Autobot insignia on his right forearm/door, and he gains yellow paint highlights for his eyes and lights, along with various other minor deco differences. Instead of the original release's cannons, he now comes with a pair of swords, which each have a pair of 3mm posts for wielding/mounting.

Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
Omron's keychains were not limited to soft plastic, with die-cast versions of the same characters from the Mascot Keychain line being made available in their Transformers Strap range. This Prime is pretty much identical to the Die Cast Figure version of the character, just a little smaller—about 2.5" in height—and with the addition of a keychain with a wrist-strap.
Hot Rod appears in All Hail Megatron , while traveling through space by himself, he found himself under attack by the Torment, a Decepticon warship crewed by Bludgeon and the Pretender Monsters. He was shot down, but managed to transmit a distress call to the Autobot starship Trion, which came to his rescue. After the Decepticons were chased off, Hot Rod joined the crew of the Trion. When the Decepticons' galaxy-wide assault hit, the Trion was shot down over Cybertron. Hot Rod sent out a distress signal and was ecstatic when he ran into some other Autobots. Hot Rod was taken back to base and relayed the story of how he and his other crew-mates from the Trion arrived on Cybertron, having been diverted there by Decepticon ships and forced to crash land. Once on the surface, Hot Rod sent out his distress signal and was so sure someone heard it. Kup arrived with the rest of the Trion's crew at that point, just in time to tell Hot Rod of course no one heard his message. After the Autobots narrowly avoided the Insecticon swarm and Sunstreaker sacrificed himself, Hot Rod jumped to Drift's defense when he was being insulted by Bumblebee. When the Autobots were later rescued by Omega Supreme, Hot Rod was glad that he sent out the distress call. He was then ferried to Earth with the other Autobots aboard Omega.
The Hasbro website explains it best: "The rogue DARK NINJA MASTER was exiled to a cave beneath Arashikage Mountain for betraying the ninja clans. After finding the Moon's Blood, a mystical stone of great power, he was able to channel the energy of dead ninjas, making him almost unstoppable. Seeking revenge, he has emerged from his subterranean prison to destroy all ninjas. Only two people can stop him: STORM SHADOW and SNAKE EYES. The two adversaries must join forces, for only by working together will they be strong enough to defeat this evil super-ninja."
The Japanese release of the figure also underwent the changes in weapon shapes, but never featured a silver Roller; instead, their original release of Prime featured a Diaclone-style Roller without the two rear pegs, and the differently-shaped launcher that accommodated him, before a running change switched over to the Hasbro version of the mold. Finally, in some European countries, Prime sported red feet, as opposed to his traditional blue; this version of the figure is also known in some cases to feature a differently-painted forehead crest which leaves the three central indentations unpainted blue.
×