Hero Optimus Prime was the first new-mold Optimus Prime toy created for the Generation 2 line. He transforms into a Kenworth truck of unknown model which defies Optimus convention by being one continuous unit, rather than the traditional cab-and-trailer combo. Decals form the windows of a faux truck face to represent his chest, featuring both his name and what appears to be a life support readout coming alive towards the end. In addition to a small gun, he is armed with a large missile launcher, which can fire a rubber-tipped rocket by means of a bellows which you slam your fist down on to produce a puff of air. The launcher is accessible in both modes, ending up mounted on his right forearm in robot mode; the bellows is attached via a rubber hose and cannot be disconnected, but stores on the figures's back when not in use, as do the rockets. A similar air-launching system with identical missiles was used by the simultaneously-released Hero Megatron, and by Laser Optimus Prime the following year (see below).
Optimus Prime also appears in Transformers: Rescue Bots, stated to take place in the same universe as Prime, as the leader of the Autobots who transforms into a semi-trailer truck, though unlike his Prime appearance, it's flatnosed like his G1 counterpart. He gave the Rescue Bots their mission and mainly appears mainly via view-screen, appearing physically in the first episode and then in the first-season finale, where his truck mode is seen for the first time on screen. He then returns, with or without Bumblebee, many times throughout the second and third seasons as a recurring character. In the episode "Land Before Prime," Optimus Prime arrives on Wayward Island to help the Rescue Bots. He scans Trex as a secondary form where gains a Tyrannosaurus form, making him a Triple Changer, though he states that scanning anything techno-organic might have unpredictable results. While he loses control of this "Primal Mode" at first, the Rescue Bots determine that his loss of control is due to low Energon reserves, and are able to replenish his energies and restore him to normal using an energon patch. At the conclusion of the third season, Optimus helps his old friend, High Tide, along with the new recruits, Blurr and Salvage, save Griffin Rock and subsequently sends Heatwave and his team on a new mission to use the island as "testing place" to reveal their true identities as aliens.
When Jazz brought Steve Guymo to the Autobot base, Optimus and the other Autobots realized that the Decepticons were behind the abduction of humans from airports across the nation. They were able to find the captive humans, whom the Decepticons were intending to ransom to the US government, and free them before engaging Starscream and his squad in battle. With the Decepticons defeated, the Autobots returned to base where Optimus thanked Steve for his help. Sun Raid (Listen 'n Play)
Released as part of the first wave of the Energon Igniters Nitro Series, this Optimus Prime is a new Voyager-sized mold that converts from a robot based on his Age of Extinction body into a truck in 11 steps, and he features 5mm-compatible hands & articulation on his head, arms, and only his upper legs. He also features built-in Ion Cannons in this lower leg panels, activated in vehicle mode. He also comes with his own energon core, which is a different mold from his Power Plus toy.
The figure seems to have some transformation scheme & design related problems in it: The front truck cab's upper two pieces are supposed to be pushed to the front in robot mode, but the piece keeps collapsing back due to looseness when the figure is standing straight (Though pressing the two halves together firmly tends to reduce this issue for a while), while the tab underneath the truck grill does not connect well with the bottom port. Additionally, his 5mm compatible hands have a slight problem with wielding weapons with short 5mm posts.
Part of the first wave of Age of Extinction Custom Kreons, this Optimus comes with a buildable parts rack on which to hang/store his many many extra pieces. His "normal" helmet and blaster are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens) plus a spare hand, as well as a buildable battle-axe, a buildable smokestack-pack, and an extra Wheeljack-style wing-pack.
Released as part of the first wave of the Cyberverse Commander class figures, this Optimus Prime is a roughly Scout-sized figure.He comes with a jetpack that can combine with both his truck and robot modes. The jetpack attaches via C joint clips, and the jetpack can transform in and out of a winged configuration when Optimus is in truck mode. Optimus himself features C joint bars for his smokestacks and trailer hitch, as well as bars on the top of his headache rack, while his hands and jetpack can hold/mount his rifles via C joint-related 3mm clips/holes.
Part of the first wave of 2012 Generations Deluxe Class toys, Optimus Prime is based on his Fall of Cybertron design, and transforms from a robot to a Cybertronian truck and back. His ion cannon, based on a weapon seen in his concept art, can mount via either of its two 5mm posts onto ports on his hands, forearms, back, and shoulder smokestacks. The toy is known for being oddly small for an Optimus Prime toy, especially when compared to other toys from the same line. This allows him to be more or less in scale with Grimlock and Bruticus (likewise from the same line), however. Optimus features sculpted fake wheels on his back.
That’s actually a very big part, but I’d go lower than the $10 sets. The little tiny box sets with one minifig and some small vehicle or accessory that were $1-4 when I was growing up in the 80s now seem to be anywhere from $5 to $12 on the shelves. The cheapest of those are the sets that you could buy as a casual gift with pocket change in the 80s. Related to that, I’d like to see a metric that tracked the bottom price (both sticker price and adjusted price) of sets each year.
A slight redeco of Takara's Deluxe-size Optimus Prime was released as part of a special set commemorating both the 20th anniversary of Transformers and the 30th anniversary of its progenitor, Microman. Coming with an exclusive metallic redeco of Takara's Kicker, which was based on the Microman body, this Prime featured a chromed grill where the original had painted plastic, and supposedly slightly shinier plastics. Very slightly.
He includes the Sword of Judgment and Sentinel Shield accessories, which he can respectively wield and mount on his left forearm, all via 6mm post. In truck mode, the sword is stored underneath, while the shield mounts onto the trailer hitch. The sword also features a 5mm post on its hilt. Interestingly, the truck mode is able to pull G1 Optimus Prime's trailer.
The second Nightwatch Optimus Prime was released as part of the "AllSpark Power" second half of the Movie line. He is similar to the UK version of Nightwatch Prime, replacing most of his red and blue with different shades of blue and black, retaining his resemblance to Diaclone Powered Convoy in most respects. However, the subdued black and copper on the first Nightwatch Prime have been replaced with gold and a very bright blue, to signify the All Spark energy affecting the Transformers. The translucent parts were also cast in purple translucent plastic instead of black translucent plastic.
Optimus awakened to the sound of Ratchet's voice. Taking in his surroundings, he noted that he was now in an organic forest, surrounded by unfamiliar Cybertronians. It soon dawned on him that he had been transported to the dimension where Megatron had intended to begin his conquest: the OG World. The 'bots surrounding him were the local counterparts to his own Autobots, including his own doppelgänger! The locals informed him that they had found him thanks to the help of his "companion," a small robotic girl. Before Optimus could puzzle out who this humanoid was, the group came under attack by the local Megatron. Though badly injured, "Cloud Optimus Prime" had the strength to fight alongside "G1 Optimus Prime" against the Decepticons, and protect the girl that had brought the Autobots to him. During the fight, blasts from both Primes' rifles collided with a blast from Megatron's fusion cannon, knocking all of the combatants down. Cloud Optimus Prime ensured that the girl was safe before before his attention was drawn to the horizon by a familiar voice. It was "Cloud Megatron," who had also survived his inter-dimensional trip, and had come to continue his fight against his nemesis. Leap
The Transformers Adventure Easy Dynamic Series release, titled "Big Optimus Prime", features extra paint details and has two additional Autobot symbols on his shoulders. He also includes a different scannable badge, which is compatible with TakaraTomy's Transformers Adventures app. Scanning this will unlock Big Optimus Prime in the collection list. Unlike the American release, Big Optimus Prime is packaged in a windowed box, instead of an an open package.
This figure was originally conceived by Hasbro to be another character (exactly who is unknown), rather than Optimus Prime, but Takara insisted that the toy be made into Optimus to help it sell well in their markets, as the vehicle mode was no particular draw, given its scarcity in Japan. Reportedly, the figure cost twice as much as other Alternators to construct, so Hasbro had to bow to this demand so Takara would help fund it. Ironically, Takara eventually wound up soliciting the figure not as Prime, but as his Super-God Masterforce lookalike, Ginrai (perhaps connected to the Powermasteresque headsculpt), before its Japanese release was cancelled and moved over into the Kiss Players toyline (see below).
In Spotlight: Doubledealer, Hot Rod's search was interrupted by Dealer's arrival on Earth, with orders for Hot Rod: find the Magnificence and use it to learn what they could about the Expansion. Hot Rod took Dealer to his hiding spot, which turned out to be the planet where they first found the device. As Dealer and Hot Rod closed on the Magnificence, he went over his first visit to the planet in his mind, and how things could have gone so wrong. Eventually he began to have suspicions, and upon locating the Magnificence, asked it the question that haunted him: had Dealer betrayed him? Sadly, it revealed the truth, and Hot Rod was forced to kill Dealer as the traitor attacked. Looking down on his remains, Hot Rod realized the truth had been staring him in the face, he just had not wanted to accept it. He then used the Magnificence to find out all he could about the Expansion, and relayed the information to the Autobots.
This release of Buster Optimus Prime was susceptible to a paint scraping issue on the silver painted slide-out barrel of his blaster. This problem was fixed for the DOTM Re-release by relocating the silver paint app from the barrel to the inside wall of an exposed gas tank that had been previously left as unpainted grey plastic. The black paint app on the barrel was left unchanged.
The lowest priced toys in the Armada line were three-packs of Mini-Cons. Each larger price point consisted of an Autobot or Decepticon who came with a Mini-Con partner. Mini-Cons could be used to unlock a variety of features on each larger robot, such as firing weapons, electronic lights and sounds, or alternate modes. Some three-pack Mini-Cons combined into other forms or had additional features. According to the storyline, Mini-Cons also enhanced the power of other Transformers, giving incentive to collect as many of them as possible.