This redeco of Leader-class Optimus Prime replaced most of the plastics in the cab robot with colored translucent equivalents, with chromed silver wrist-pipes, a golden chrome Matrix, and red chrome window frames. His trailer remained opaque, but was cast in much deeper red plastic, with a more metallic silver used for his cannons. He was available only in a Toys"R"Us Japanese exclusive giftset released in October 2005, with a redeco of Wing Saber, and the Coby Sen'yō Rumble.
Simon Furman's "Alignment", a text story available through Transforce, a British Transformers convention, mentions Prime falling during what was intended to be the final conflict with the Decepticons at Pinea Omicron, long after the events of the Generation 2 comic book. He managed to defeat Galvatron II, but in doing so, was damaged such that Grimlock had to engage a stasis field around him to save his flickering Spark, making Prime a living war monument.
The cab transforms into the robot mode of Optimus Prime himself, with the addition of a pair of removable blue fists that plug into his headlights. The fists themselves do not store anywhere in vehicle mode, but can fit easily in Prime's opening chest compartment (originally designed to accommodate two Diaclone driver figures). Prime is armed with a black laser rifle that, due to design, he cannot hold straight.
Bumblebee may be beloved, but so is Optimus Prime and writers have seemingly killed off Optimus a million times in different continuities. So it can’t be too much of a surprise to know that Bee has met his maker on a few occasions as well. In the “Dark Cybertron” storyline of the IDW Generation 1 continuity, Decepticon Shockwave goes mad with power and wants to destroy all Autobots and Decepticons. In the process, Shockwave kills Bumblebee and sets off a chain of events that leads to retribution against Shockwave.
He next appears in Transformers: Energon, the only time during the Unicorn Trilogy where Prime is not the main protagonist. In Energon, set ten years after Armada, he is no longer able to combine with his trailer. Instead, he has been gifted with the Spark of Combination by Primus, allowing him to combine with the quartet of vehicular drones in his trailer. Fire One, Copter Two, Digger Three, and Submarine Four, can each form either an arm or a leg when they combine with Prime, creating his super mode. Later, Prime gained the ability to combine with fellow Autobots Wing Saber and Omega Supreme, the latter case creating Optimus Supreme.
Part of TakaraTomy's Movie Advanced Series lineup, Revenge Optimus Prime is redeco of the 2010 Transformers Battle Blades mold, featuring darker plastic, a pair of flip-out swords (the first release of this mold) from the Hasbro release, and chromed fuel tank-guns & sun visors. His shins & wheel joints are bronze from the Hasbro release as opposed to the grey of Takara's Autobot Alliance release.
Golden Lagoon Convoy is a gold and gold chrome redeco of MP-10 in homage of the original cartoon episode of the same name. He retains his energon axe, ion blaster, and Matrix of Leadership. Part of TakaraTomy's 35th anniversary celebration, he was initially released at Summer Wonder Festival 2018, then later through Cybertron Satellite stores across Japan and TakaraTomy Mall.
Optimus Prime started life as Optronix (Orion to his friends), Hardwired a data archivist at the Vaults. After taking note of a battle in which the Autobot leader Sentinel Prime had been defeated by Megatron, he was summoned to the Council of Ancients and informed that the Matrix had chosen him to be the next leader of the Autobots. He received the Matrix of Leadership shortly thereafter, gaining a powerful new body in the process. After dispatching a Decepticon assassination squad sent to, well, assassinate him, he ordered the Autobots to prepare to evacuate Cybertron, intending to leave the Decepticons to their own devices. The War Within #1
This is not to suggest that specialized pieces are bad. Far from it. LEGO Indiana Jones would never feel real without Indy’s whip; LEGO Board Games would never spring to life without their unique dice. But there’s no denying that specialized pieces are costly to produce, and their proliferation was a prime reason why the LEGO Group’s profits plummeted through much of the 1990s, despite steady sales.
Based on his appearance in War for Cybertron, Generations Optimus Prime transforms from a red, blue, and silver robot into an "armored truck mode." He comes with a hand-held rifle that is held via either of its two 5mm posts, and can fold up to store in either mode. He features additional 5mm ports on his forearms, roof, and front-wheel panels. Optimus has a stylized sculpted Autobot insignia on his back, as seen in the game, but it is obscured by kibble.
Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe. Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.
Of course, many voice actors have voiced him in different TV shows and video games over the years, in both English and Japanese. Most notably by a Power Rangers actor and a Batman voice actor. The latter is Will Friedle, who voiced Bee in the most recent series, Robots in Disguise, plus cameos in Rescue Bots, Transformers Prime, and the Predacons Rising TV movie. Friedle is well known as Batman’s voice in Batman Beyond. As for the Power Ranger, that would be Johnny Yong Bosch, who played Adam Park, the original Black Ranger. Bosch was Bumblebee’s voice in the video game Transformers: War for Cybertron.
Voyager figures all feature a spring-loaded MechTech-style transforming weapon, partially constructed from translucent plastic, which lights up via LED when the weapon is deployed. The figures themselves also feature translucent plastic, so the moving LED creates the image of energon power "flowing" from the character's bodies into their weapons. This worked better in theory than in practice. Internally, these figures were referred to by Hasbro as "Powerizers".
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.
Rodimus also appears in the novel Transformers: Retribution as part of the crew of the Ark. Along with Kup and Bumblebee, he suspects that something is amiss with the inhabitants of the planet Aquatron, and takes a small drops ship down into the planet's oceans to investigate. The trio are captured and brainwashed by the Quintessons, who force them to testify against Optimus Prime in a mock trial. Fortunately, they are later returned to normal and return to space aboard the Ark with the rest of the Autobots.
For many, it may seems that the advent of licensed sets3 correlates with the perceived increase in prices. The 1990s and before were a nostalgic heyday of affordable LEGO sets. This is not quite true. Below is a chart that compares the price per piece of licensed sets and unlicensed sets starting in 1999. 1999 is the first year that LEGO had major licensed themes.
Released as part of the "W Convoy" campaign ("Double" Convoy, that is!) alongside a silver chrome version of Energon Rodimus, this gold chrome "Mēki" ("plating") version of the Deluxe size Optimus Prime toy was available only as a prize in a mail-in Robot Points contest. Initially limited to 20 units in the original draw, it appears that many more were made available through toy store drawings, given how many went on to appear on online auction sites through 2005 and 2006.
This redeco of the Ginrai tooling of the Powermaster Optimus Prime figure (released concurrently with the 2001 reissue of the Ginrai figure) was a Toys R Us Japan exclusive black repaint, made to represent the original Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' color schemes.
The brand was yet to get its biggest revitalization, though. In 2007, Paramount Pictures released a high-budget live-action movie. Though many long-time fans resented the changes in style and story that the movie brought forth, it performed incredibly well at the box office and launched the brand into the public eye all over the world. Now, everyone recognized the concept of alien robots disguised as cars, and everyone associated the concept with the name: Transformers.
Just which character this toy represents is up for debate. The toy's bio claims he used to turn into a tractor-trailer (indicating Optimus Prime), but considering the timeframe of when they were written and the whole lack of a stance on who Primal "was" before the show and blah blah blah... it's just easier to file this under the same iffiness as the original toy bios set on modern Earth and leave it at that.
A Bic Camera and Joshin Kids' Land exclusive, this redeco is the first release of the Prime: First Edition Deluxe class Optimus Prime figure in Japan, featuring a slightly lighter hue of red (the stock photography provided by TakaraTomy, showed Orion Pax's red plastic features more pink than its original toy, this seems to have been a trick of the lighting or a photoshop), and greyish blue plastic. He features several customer-applied foil stickers, including Decepticon insignias of varying sizes. He comes with a gold vac-metal version of the Arms Micron, R.A., as well as the normal blaster-cannon.
He made it out of the building and ran into the real Sunstreaker, who blasted the 2 clones following Hot Rod. Sunstreaker ignored Hot Rod's warning about Scorponok's army and stormed into the building so Hot Rod painfully wired himself to send a distress signal. When Sunstreaker's real head was later disabled by Hunter, the Headmaster clones shut down, which Hot Rod explained to Grimlock. The group was surprised by the arrival of Shockwave, but Ultra Magnus had heard Hot Rod's distress call and was on his way to Earth. After Scorponok knocked out Sludge and Grimlock tended to him, the remaining Dynobots offered Hot Rod a lift aboard the Monsterbots' ship. He refused though, and made it back into Machination HQ to take care of something "personal". He eventually found Scorponok's real head. Hunter also showed up and let Hot Rod know how to disable it, but before he could do so, Scorponok grabbed him. Before Scorponok could crush Hot Rod's head, the Dynobots showed up and began to battle Scorponok. Hot Rod told Swoop which wires to sever, and he did just that, reducing Scorponok to a catatonic state. Ultra Magnus arrived took everyone back aboard his ship, which later docked with the Ark-32. Within 3 days, Hot Rod was fully repaired, with a new body form design.
The set is a counterpart to TakaraTomy's simultaneously-available Transformers Animated Sons of Cybertron set, which also features translucent versions of that line's Deluxe Optimus Prime and Rodimus figures. It was intended as an exclusive for the Japanese Chara Hobby 2010 festival, but was also initially offered as a raffle prize at the 2010 "Autobot Alliance" event in the Philippines., and was later available for purchase at Cybertron Con 2010 in Shanghai.
A giant statue of Optimus Prime in front of the Cybertron Archives holding two Golden Disks appeared on Cybertron in the Beast Machines series, but was destroyed by the Vehicons in the episode Fires of the Past. When show writer Bob Skir was asked what these two disks were he said that neither the statue nor disks were in the script, but he suggested that they were either the disks from Voyager 1 and Voyager 2 probes or that Optimus won them in the 2,395,989th Annual Cybertronian spelling bee.
A perfect example of why I dislike modern Transformers more and more. I'm 22, and when I was younger Transformers were my favorite thing. I still have many of the ones I had back then. But nowadays I'll go to Target or Toys R Us (RIP) and see what Hasbro has been up to, and they're bragging about how this Transformer only takes 5 steps to transform!
Q-Transformers Optimus Prime is a tiny super deformed toy based on the Alternity Convoy design, transforming into a Nissan GT-R R35, though his legs retain the traditional blue truck bed motif. The English name on the packaging refers to him as just "Optimus". He comes with a code for unlocking "GTR Optimus Prime" as a playable character in the Q-Transformers: Mystery of Convoy Returns game. Standing at only slightly less than one inch and a half, this is actually the smallest transforming Optimus Prime ever made, which is a fairly impressive feat considering the surprising amount of detail in sculpt and paint apps.
Another release of the Reveal the Shield Legends Class sculpt. The deco for its initial release is unchanged from the Transformers release from 2012, whereas the tooling is identical to the 2012 release's running change variant, with the retooled hands and a hole on the back of his head/top compatible with Cyberverse 3mm pegs. Bizarrely, the package art is lifted directly from the Generations Legends Class Optimus Prime/Autobot Roller two-pack's packaging, whereas the stock photos depicted on the back of the packaging are taken from Reveal the Shield Optimus Prime's packaging and only slightly altered, advertising a "Reveal the Shield" rubsign gimmick the toy doesn't actually have. Meanwhile, Hasbro's official stock photos provided to online retailers (including an in-packaging photo) depict the toy with the sword that came with the running change variant of the sculpt's 2012 release, even though the actual toy doesn't include the sword.
Hasbro's subsidiary Milton Bradley (MB) released the toy in Europe in late 1985, following a slight delay due to licensing issues; there are no less than three variants of MB-packaged Optimus Prime, one of them manufactured by Takara and sporting blue feet, the other two manufactured by Joustra as part of a deal with Hasbro/MB, one of them with blue and the other one with red feet;
If there was one thing the toy planes of yonder were lacking, it was controllability. Guaranteed crash landings and the subsequent walks of shame to go pick up the pieces started to wear a little thin. The advent of radio-control provided an answer for that. But for model builders Aviation Design, that was child's play. Hense, the birth of the FALCON 7X business jet.
The "robot mode" of Optimus Prime is where the pullback motor and working wheels of the toys lie. Optimus is sculpted in blue plastic, pre-posed in an odd crouching pose with zero points of articulation. His right knee is bent back, with his right arm touching his knee, while the left side has the leg forward and the left hand holding onto his butt. The toy is as sparsely painted as the truck, with light blue eyes and chest windows, gray hands and feet among other parts, and red forearms. Two panels on his back have red flame tongues on them.
Available exclusively at Hasbro Toy Shop and their booth at San Diego Comic-Con 2011, this version of Ultimate Optimus Prime is presented in vehicle mode, packaged into a large, foil-embossed bubble packaging (similar to late Alternators packaging) styled after Optimus Prime's trailer, with an additional foil-embossed sleeve styled after the hood of Optimus Prime's truck. Exclusive to this release is a set of stickers one can apply to the trailer. The toy itself is otherwise identical to the regular retail release.
Released to commemorate the 10th anniversary of Revenge of the Fallen, this Studio Series Optimus Prime is a retool of the figure above, featuring many new parts, namely a new backpack, chest piece, and a pair of non-transforming fenders/legs, to better resemble his appearance in the first two movies. These new parts allow him to combine with Studio Series Jetfire to form "Jetwing Optimus Prime." His color scheme features a much higher contrast than the previous release. Instead of Energon Swords, he now comes with an ion blaster like that used in the battle of Mission City. He also comes with a cardboard backdrop display depicting the highway fight with Bonecrusher from the first Transformers film.
Optimus was eventually revived by the Autobots when they arrived to liberate Master from Decepticon hands. They found allies in the native Cyberdroids—those Optimus loyalists who had fought the Malignus insurgency. Autobots and Cyberdroids liberated the deposed triumvirate of Apex, Hi-Q, and Diac. Hoping to check the power-mad Galvatron and his three Cyberdroid allies, the Autobot leader was revived and binary-bonded himself to three Cyberdroids, including Surge, and Apex, who formed his head. Thus empowered, "Triple-Threat Prime" battled Galvatron and his forces across Master in a series of epic conflicts. The Autobots were unsuccessful and were forced to retreat. A Brush With Infamy–Prologue
This version of Leader-class Optimus Prime features a new lower face sculpt that lacks a faceplate, as well as the replacement of his fuel tank/exhaust assemblies with new, transforming versions that can combine into his ion blaster/barrage cannon. To the simultaneous pleasure and displeasure of people who had already purchased the first release of Leader-class Revenge of the Fallen Optimus Prime, Buster Optimus Prime features an extensive paint job that closely matches Prime's appearance on the big screen, including covering almost all of his grey plastic with silver paint or chrome, expanding and outlining all of the flame tampographs white for greater accuracy to ILM's computer model, and generally painting in small details, nooks and crannies that were neglected on the first release due to cost-cutting reasons. The red and blue plastic colors also vary from the original release, to better match his film appearance.
Optimus Prime was blasted into pieces by Dragon Megatron. Beast Wars Metals #5 Fortunately, his spark remained perfectly intact—in the remains of his Matrix-shaped spark chamber. Megatron was going to destroy Prime's spark, but Cheetor (now in his Transmetal body) saved it. Prime's spark was eventually swallowed by Optimus Primal, who was upgraded into Optimal Optimus by doing so.
The series begins when Optimus and his crew, after picking up a disillusioned ninja named Prowl, are sent to clear rubble from a space bridge passage. There, the Autobots stumbled upon the Allspark and are immediately attacked by Megatron's battle cruiser, the Nemesis. Through treachery by Megatron's second-in-command, Starscream, Megatron was fragged and the Autobots crashed on Earth in the early 21st century. After being in stasis under Lake Erie for 50 years, the Autobots awaken in Detroit of the near future, where they immediately discovered humans in need and became heroes of the city. During the battle for the possession of the Allspark, Optimus goes offline after defeating Starscream, only to be revived by Sari Sumdac and her Allspark-infused key.
Excellent article. Especially for pointing out how different we remember things from ‘when we were kids.’ (I swear Optimus Prime was two feet tall!) My only criticism is linking to those two Brickset articles about supposed “quality decline”… the headlines are sensationalist and inflammatory, and a LEGO rep eventually replied to the spurious claims with information that deflates much of the (somewhat unfounded) criticism. Also the comments give me a headache. Otherwise great stuff!
At BotCon 2005, Hideaki Yoke revealed that Optimus Prime (or more accurately, Diaclone Battle Convoy) was not designed by a single person, but rather a team of Takara designers as the one who was originally assigned the job had fallen behind. It is said that a young Shoji Kawamori was also a member of this team at some point, who would design THS-02 Convoy over 20 years later. The patent for the toy, however, lists Hiroyuki Obara as the designer.
The sequel series, Transformers: Generation 2, began an undisclosed period of time later. At the beginning of the series, Prime was restored to a form resembling his original body. He and the Transformers found themselves caught in the schemes of a new generation of Cybertronians, led by the icy Jhiaxus, who were colonizing and cyber-forming other worlds. Plagued by nightmarish visions of a life-destroying entity called "the Swarm", Prime looked into Cybertron's past and discovered that Jhiaxus and his kind were the result of an unintentional Transformer reproduction. Their nature and intent, he found, was distilled to the purest, most unemotional form of conquest and that the Swarm was the by-product of this process. To fight this new enemy, Prime and the Autobots entered into an alliance with the recreated Megatron's Decepticons. Though Prime was eventually consumed by the abomination and destroyed, he was able to unleash the energies of the Matrix into the Swarm, purifying it. In parting, the Swarm recreated Prime in a new form, and he and Megatron set out to lead the united Autobots and Decepticons into a new age.
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.
Being a brand new and intricate remake of the Autobot leader, MP-10 was used as the gold standard in terms of scale for future Masterpiece figures, with all the upcoming releases being sized to best match him. Much like his older incarnation, he was also cherished by collectors, generating heated debates on which version is the best one up to this day.
The line was released as "The Transformers" in the United States, Canada and the UK in 1984 (One year after the Gobots) but Takara was still marketing Diaclone at least during 1984. Hence in Japan "The Transformers" did not debut under that brand till 1985, when the line was also rolled out to the majority of the rest of the world between Takara and Hasbro. Hasbro Europe still will not accept, however, that the range was released in the UK in 1984, not even with evidence such as Argos 1984 catalogues containing the range, the UK comic launching in September 1984 or even the 1984 Transformers product catalogue produced by "Hasbro Industries (UK) Ltd, Wokingham". It is thought that Hasbro Europe as it now stands did not come into existence till 1985, hence no records of Transformers sales in 1984. UK Transformers toys were sold in boxes identical to those of their American counterparts until around 1998/9 when the range started to have UK exclusives.
Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster, a Barrage cannon, two retractable energon blades that extend from his forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, and two retractable energon hooks that extend from his wrists. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.
It may be that the price of an individual brick has gone down over time, but what does it matter if the size of the bricks has decreased overtime? Sure, the average number of pieces in a set has increased, but how many of those pieces are tiny details? To answer this question, I compiled all the weight data on brickset.com and compared the sets by their price per gram in a similar fashion to how I compared them by price of piece. Below is the chart of my results (prices are in US dollars).
In "Human Error" Parts 1 and 2, Soundwave captures the Autobots with the help of his minions, Laserbeak and Ratbat, in order to brainwash them. Part of Soundwave's elaborate scheme consists of tricking the Autobots into thinking they have turned human. Optimus Prime's human form is a male caucasian in his early 20s wearing a red jacket. Sari forms a group of "Substitute Autobots" which consists of Scrapper, Wreck-Gar, and Snarl, to rescue them. They free the Autobots from Soundwave's control and Optimus grabbes Laserbeak to engage in a guitar vs. keytar battle with Soundwave, who used Ratbat. Optimus smashes Soundwave and Ratbat into pieces using Laserbeak in guitar mode, but Laserbeak grabs Soundwave's surviving components and flees.
When a two-part race was being held with a massive supply of oil and gasoline as the prize, both the Decepticons and the Autobots badly wanted to win it. Megatron entered the race by hiding himself inside a hollowed-out car and harassed Cliffjumper all throughout the contest. When Prime discovered the car was being driven by his arch foe, he swiftly pulled a telephone pole out from the ground and used it to bash the mortal hell out of the cheating Decepticon. Thanks to Prime's violent intervention, Cliffjumper was able to win the race. Afterward, Optimus Prime celebrated the Minibot's victory with a gargantuan smile as all the Decepticons starved to death. The Great Car Rally
Surely one of the strangest examples of licensed Transformers products, Sports Label Convoy transforms into a shoe. Something of a shellformer, this baffling incarnation of Prime is colored primarily white and red in his alt mode of a realistic-looking (if notably undersized) Nike Free 7.0 sneaker, complete with gratuitously long real fabric shoelaces. In robot mode, he is made instantly recognizable by his incorporation of some additional blue and silver in predictable areas, and a traditionally Prime-styled head. Less traditionally, and somewhat perversely, Prime's feet are sculpted in the likeness of his own sneaker mode, making it seem like he's wearing himself!
Optimus Prime is the awe-inspiring leader of the Autobot forces. Selfless and endlessly courageous, he is the complete opposite of his mortal enemy Megatron. Originally a mere civilian known as Orion Pax or Optronix, he was chosen by the Matrix of Leadership to command, the first in a number of heavy burdens he has been forced to bear. Another is his bringing of the Transformers' conflict to Earth. Every casualty, human or Cybertronian weighs heavily on his spark. He does not show this side to his soldiers and never succumbs to despair. The Autobots need a decisive, charismatic leader and that is what he gives them. It was that leadership which turned the tide of the Great War.
Being a Combiner Wars Voyager, Prime is naturally capable of transforming into a torso mode to combine with any 4 Deluxe Class Combiner Wars-style toys, though his packaging call-out has him form Ultra Prime by combining him with Deluxe Class Skydive and Alpha Bravo as the arms, and with Firefly and Decepticon Drag Strip as the legs. He can combine with Sunstreaker, Mirage, Prowl, and Ironhide if one wishes to have an IDW-accurate Optimus Maximus.
I understand what you’re saying. You want it to be like the Cybertron games of making them look less earth but still have the colors and molds of G1. Because I never knew that G1 actually had their vehicles molds in their Cybertron Alt Molds. I thought that was so stupid having earth vehicles parts on Cybertron. But they had to make the G1 fans and Bay fans happy so they took the cartoon and modernize it with some bayism look. I think they did good but I can see some parts being better.