Part of the first wave of Bot Shots Series 2 five-packs, this redeco of the original Optimus Prime toy is cast in translucent blue plastic, with his cab painted white. Despite possessing translucent plastic and more lopsided stats than a regular Bot Shot, he is apparently not labeled as a Super Bot. This version of Optimus comes with similarly-themed with new redecos of Bumblebee, Mirage, Ironhide, and Jetfire.
The figure also comes with two gun accessories, the "Eliminator Gun" and "Assault Blaster", which combine into the "Mega Striker", a rifle that closely resembles the one used in Dark of the Moon. The separate guns also have a MechTech-style transformation, and pulling a lever transforms them into alternate crossbow-like shapes. In "battle vehicle mode", the sides of the truck are rotated up, and the guns can be attached by small pegs to holes in the modified smokestacks, or they can plugged into any of the standard connection points with their 5mm posts... except the ones on the hinge behind the cab, since those are supposed to be for his Energon battle blades.
The set is a counterpart to TakaraTomy's simultaneously-available Transformers Animated Sons of Cybertron set, which also features translucent versions of that line's Deluxe Optimus Prime and Rodimus figures. It was intended as an exclusive for the Japanese Chara Hobby 2010 festival, but was also initially offered as a raffle prize at the 2010 "Autobot Alliance" event in the Philippines., and was later available for purchase at Cybertron Con 2010 in Shanghai.
In Super Mode, Optimus Prime can combine with Leobreaker to form "Savage Claw Mode", which sees the feline Autobot become a gigantic clawed arm for his leader. Alternately, if Prime's backpack is removed, he can merge with Wing Saber into "Sonic Wing Mode", with the aerial ace forming a new winged backpack and chestplate for Optimus, and providing him with new hand-held sword weapons and firing missile launchers that connect to his Super Mode boots. The nature of the combination means that the two partners cannot combine with Prime at once—at least, not without physically removing one of Prime's own arms.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
There is also a smaller "Legends of Cybertron" Micro sized version of this Optimus Prime, without a trailer, and a Burger King Kid's Meal toy, again without a trailer. There is also a rotating sucker holder version of Cybertron Optimus Prime. Later releases of the Leader class and Micro class Optimus Prime were repainted in darker colors, supposedly representing Optimus Prime after the television story. This toy is called Galaxy Force Optimus Prime. A special metallic painted version of this toy was included with Megalo COnvoy in Japan.
Many Transformers come with tech specs (short for technical specifications) printed on the back of the box that they are sold in. The owner of the new Transformer is encouraged to cut out the tech specs and save it. This card has information on the Transformer, and will usually include the character's name, picture, indication of allegiance (Autobot, Decepticon or other), function, a quote, a description of the character, and numerical values of the character's various attributes. Although only the numbers can be truly deemed "technical specifications", the entire card is usually referred to as the Transformer's tech specs. Each specification is rated by a value from 1 to 10, 1 being the lowest, and 10 being the highest.
The single carded release of Optimus Prime is a redeco of Revenge of the Fallen Legends Class Optimus Prime, exclusive to Walmart in the US and Asda in the UK. Deco changes included in this toy are the top half of the knee armor's blue being omitted and an Autobot insignia tampographed on the left knee, and similar to the Legends Class Power Armor Optimus Prime: the red arms, and the abdomen was replaced into blue.
A heavy retool of Combiner Wars Ultra Magnus, this Optimus Prime is based on the Powermaster Optimus Prime toy from 1988. Despite this, Hi-Q (now renamed 'Autobot Apex', presumably for trademark reasons) doesn't form the engine on Prime's chest; instead, he transforms into a de-faceplated version of the original Powermaster Optimus Prime cab robot head, over which a helmet slides during transformation to complete the Powermaster Prime look. In all three of Optimus Prime's modes are various pegs and seats with which Titan Master figures can interact. Like other Leader Class figures, his base mode can connect to other Titan Returns figures with base modes.
Transformers: Energon introduced several new concepts to the toy line. Two new sub-groups, the Omnicons and Terrorcons, joined the fray, representing smaller factions of the Autobots and Decepticons respectively. The smaller toys in these sub-groups came with Energon weapons that could be used by the larger Autobots and Decepticons, along with Energon chips that could be fastened to the larger figures to enhance their power. Energon weapons and chips came in a variety of colors of translucent plastic. Many Autobot figures in the line were able to combine with a partner to form a larger robot through the "Powerlinx" process. The Decepticons were designed instead with alternative "attack modes". While no longer the focus of the line, there were several Mini-Con releases in Energon as well.
Today, generally the creator sets only emphasize Lego as a building system. They come with pieces and instructions for two alternate models. Generally, Creator sets utilize a more basic color selection and look less “realistic” due to the emphasis on a versatile piece selection. Contrast that with current licensed themes and even Lego’s own proprietary themes. Themed/licensed sets are now trying to achieve more “realistic” models. As a result, piece and color selection skews toward more specialized pieces and colors again making the “critical mass” of pieces harder to achieve.
Minor note: Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
Hybrid Style Optimus Prime is an insanely detailed and complex transforming toy, created under the supervision of famed mecha designer Shōji Kawamori. Standing only three and three-quarter inches tall in robot mode, the figure is partially constructed from die-cast metal and features one of the most complex transformation sequences ever seen on a Transformers figure of its size. Alas, the small size of the figure also works against it, as it required several design concessions that resulted in (if we're being nice about it) an unimpressive cab mode.
The most controversial line of this period was the Pretenders. Pretenders consisted of a Transformer contained inside an action figure shell who could "pretend" to be either a human or a monster. Complaints with this line were numerous, including the lack of articulation of the figures (the shells could only move their arms), the simple transformation of the robots within, and their increasing lack of resemblance to any sort of modern recognizable vehicle. Still, despite the complaints, the Pretender line continued through all but the final year of Generation One, with variations such as Beast Pretenders, Monster Pretenders, Classic Pretenders, Mega Pretenders and Ultra Pretenders, each with variations on the theme or increasing levels of complexity.
The set also includes a redeco of Generations War for Cybertron Optimus Prime figure, which changes the original figure's dark red plastic to a brighter, more vibrant red, changes the gray plastic to a darker charcoal tone, changes the "windows" from gray to nearly black, and replaces most of the original figure's pink-ish red paint details (which were yellow on the redeco from the "Rage over Cybertron" three-pack) to teal.
Upon discovering that the Matrix was the key to destroying Unicron, Optimus Prime and Ultra Magnus went alone to face Unicron while the rest of the Autobots executed the plan to restore the original timeline. They hoped that at least one of these plans would be successful. Prime was injured in the confrontation with Unicron and, although his injuries were not mortal, he passed the Matrix to Magnus, who shed his outer armor and managed to complete the mission, destroying Unicron.
Just which character this toy represents is up for debate. The toy's bio claims he used to turn into a tractor-trailer (indicating Optimus Prime), but considering the timeframe of when they were written and the whole lack of a stance on who Primal "was" before the show and blah blah blah... it's just easier to file this under the same iffiness as the original toy bios set on modern Earth and leave it at that.
Four million years ago, Cybertron, shaken from its orbit and drifting through space, became threatened when it floated into the path of an asteroid field. Prime led a group of elite Autobot warriors on the Ark, the Autobot starship, on a mission to destroy the asteroids. Although the mission was successful, during the aftermath of this mission, the Ark was attacked by Decepticons hoping to overpower their weakened foes. Intent on keeping the secrets of the Ark from the Decepticons, Prime set the craft on a suicide course, crashing it into the then prehistoric planet Earth.
As yet another in an increasingly large number of reissues of the original Generation 1 Optimus Prime toy, this entry in the Japanese-exclusive The Transformers Collection line of reissues added a few extra goodies to spice things up. Chiefly, the figure was armed with a new energon-axe, based on the weapon used by Prime in the Generation 1 cartoon episode, "More than Meets the Eye, Part 2", which plugs into either of the headlight-holes that normally accommodate Prime's fists. Additionally, Prime came packaged with a ring binder folder designed to hold the pull-out character file sheets that were included with all the other Transformers Collection reissues. Notably, this figure reinstated the original, thick version of Prime's rifle as the standard for all future Japanese reissues.
In late 2014, twelve Kreons were sold through TakaraTomy's "TakaraTomy A.R.T.S" Gacha capsule-toy machines in Japan. Thankfully for the rest of the world, these Kreons are all basically identical to previously-released ones in the Hasbro lines. The Gacha release of Optimus Prime is basically the base Custom Kreon Optimus using his clear-plastic helmet and carrying the small ray pistol, lacking his leg-wheels, smokestacks and backpack (and of course all those other parts and accessories).
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is a extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation One and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
As the final new-design Optimus Prime toy from the original Generation 1 era, the Japanese-exclusive Star Convoy was a significant departure from previous versions. This incarnation of Prime transforms into an extended-hood cab truck of made-up model pulling an implausibly large trailer, incorporating the motorized "Microcarrier". Powered by four AA batteries, the Microcarrier drives Star Convoy either forward or backward, spinning a radar dish mounted on the rear of his trailer as he rolls along. Prime's teammate in the Battlestars, Grandus, can link up to the rear of Star Convoy's vehicle mode and be pulled along behind him; Sky Garry can then land atop Grandus, forming a giant vehicle.
In true Prime style, forward portion of the vehicle mode detaches to become Prime himself, while the rear "trailer" transforms into a gun emplacement. In robot mode, the barrel of the truck's left cannon detaches to become a hand-held rifle for Prime, and the figure features an opening chest compartment concealing a removable Matrix of Leadership accessory. Prime's gigantic hands mean that he can't hold it especially neatly, but he can certainly grip hold of it. Atypical of both most Unicron Trilogy figures and indeed, Optimus Primes in general, Prime's hands are not designed to accommodate weapons with 5mm posts, instead featuring a small peg-hole in his palm that allows him to tightly grip objects designed to fit there, like his own rifle, Leobreaker's whip, Cybertron Wing Saber's swords, and Cybertron Metroplex's axe. However Cybertron Wing Saber's sword hilts will also act as adaptors allowing Prime to hold and use 5mm weapons.
Mega Optimus Prime is a new larger-sized mold with the similar transformation scheme from the 3-Step Changer toy. It transforms from truck to robot in just 3 easy steps! His deco is based on his appearance in the season finale "Battlegrounds". He also obtains additional articulation on the arms, and sports connector ports for any Robots in Disguise (2015) Mini-Con figures.
Platinum Optimus is a redeco of the Leader Class Optimus Prime. Optimus' color palette is now darkened with some additional paint details. His "Sword of Judgment" is now a light blue. Optimus features more chrome on his "Vector Shield", chest, and on his head. The set was a shared exclusive, available from BigBadToyStore and Toys"R"Us, and was also sold during a Taiwanese event celebrating the launch of Transformers Rising.
"Cybertron Optimus Prime" new features a darker grey plastic, and mostly shares the same paint mask to the original Deluxe class figure, with added paint details on his head and the mesh-like pattern on the front of his "entry" mode. The silver paint on his chest was slightly changed from the original and he lacks the paint on his feet, his "headlights", and the top of his "entry" mode. Lastly, he features Cyberglyphics on his vehicle mode windows, and the rear sides of the vehicle. His flame attachment is now cast in translucent red plastic with orange sprays.
Leader class figure, this is his form used in the Cybertron television series. Can combine with Leobreaker (or Nemesis Breaker) and/or Cybertron Wing Saber, and can use Metroplex's axe or Vector Prime's sword. At first, Optimus Prime's (Galaxy Convoy in the Japanese version) alt-mode is a futuristic firetruck, although some believe it to be some sort of mobile weapons platform (the show itself treats it as a firetruck). This can also transform into a wing mode, with wings and cannons on each side of the truck. In addition to his standard robot mode, he can combine with his rear 'trailer' section to form a heavily armed super mode. That trailer section can also form an independent weapons platform, usable by anyone. His face, designed in the classic Prime style, merges the two mouth-plate elements - a slitted version to expose his mouth, like Beast Wars Optimus Primal did on the television series and a full mouth-plate which can rise to cover it.
Towering at only barely over two inches, this was actually not just the smallest movie-verse Optimus but even the smallest transformable figure of Optimus Prime for a while - ironically enough, being even slightly tinier than the Smallest Transforming Transformers Optimus Prime - that is, until he was later "out-tinied" by two other cute super deformed versions.
Available in a two pack set with Battle Changer Megatron, this Optimus is largely the same as as the single release, with some minor differences. He uses a new "double harness" piece on his torso instead of using two harnesses, leaving more space for his head to grip the neck-post. He also has different windshield decals, and his reds and blues are slightly darker. And, most obviously, he has an additional buildable trailer, though it doesn't really attach to the truck mode in any meaningful way.
"Convoy Last Production" was the final re-use of the Masterpiece toy mold before it was at last retired after numerous re-releases and redecos. The figure is essentially identical to the original Japanese MP-1 release, aside from a slightly brighter red, and the addition of the words "LAST SHOT" in Transformers typeface molded into the small of Convoy's back, hidden beneath its headlight-flaps in robot mode. Lacking the trailer of MP-4, the figure instead comes with a redecoed version of the electronic base included with Hasbro's "DVD Edition" of the figure from five years prior, which now features a collection of sixteen soundbytes of Convoy delivering famous lines from the Japanese version of the Generation 1 cartoon, recited by the character's original Japanese voice actor Tesshō Genda. The base was promoted as containing a hint as to the identity of the next Masterpiece toy; as it would turn out, this was a new version of Convoy himself (see below), foreshadowed by a sound clip on the base which played only intermittently, and which had Convoy announce that he would "soon be reborn".
A Supreme sized version of Optimus Prime, based on the Voyager class figure design. When pushed forward, the upper torso spins and transforms, with the transformation sound indicating the completion of the process. The right arm has an axe-swinging action while the left arm has a punching action. Includes show-accurate battle axe that features retractable blades and a spinning jet flame. Also features sound effects and pre-recorded dialogue ("My name is Optimus Prime!", "Let's go!" and "Bring it on!"), as voiced by David Kaye.
Thanks to fellow Seibertron user, Sabrblade, we have discovered some new in-hand pictures of the forthcoming Transformers Studio Series #38 Voyager Class Transformers Bumblebee Optimus Prime figure! These come couresty of YouTuber TonTon Reviews, presumably as a preview of his next review. For comparison, they have put this new entry into the Studio Series with MP-10 and Takara Tomy's Movie Advanced series "Classics Optimus Prime" (Evasion Mode Optimus Prime). This gives us a good - Read More
In Transformers: Autobots, Optimus Prime meets up with the other Autobots to give further commands to his troops. Create-A-Bot, the new rookie, is eager to help in the cause, but Optimus tells him to sit back while the other Autobots fight the Decepticons. Create-A-Bot finally defies orders and completes a mission against Optimus's council. After nearly getting himself and the other Autobots killed, Create-A-Bot apologizes to Optimus personally. Taking pity on the newcomer, Optimus lets him off with a stern warning, and they move out together to face Megatron, who has absorbed the power of the Allspark. Optimus fights Megatron, but Megatron gains the upper-hand. Optimus is on the verge of defeat when Create-A-Bot takes the Allspark and drives to Megatron's chest, weakening Megatron but mortally wounding himself in the process. Optimus fights Megatron again, defeating him. As Megatron is on the ground, he tells Optimus that if he kills him, the Allspark will be destroyed and Cybertron will never be restored. Optimus says to Megatron that he will do what he must do, then he raises his sword and kills Megatron, destroying the Allspark in the process. Create-A-Bot also dies, but not before telling Optimus his final request to make Earth the new home of the Autobots and to protect the humans. The game ends with Optimus sending a message to all surviving Autobots taking refuge among the stars.
The original Hasbro stock photos depict him as having red paint operations on his kneecaps and the sunken ridges around his blue abs that the final product lacks. The photos on the cardback show him with a red Autobot symbol on his truck door and blue plastic instead of grey for the piece just in front of his rear tires. The back photo also depicts his side windows as being the same translucent orange as the front ones, when they are, in reality, a garish solid orange.
A redeco of Legends Optimus Prime replacing his red plastic with more blue and silver, but sprucing things up a bit with red flame paint operations. Defender Optimus Prime (ディフェンダーオプティマスプライム) was only available in Japan as part of their Transformers Animated promotion in March 2010. It was given away for free to customers who purchased Animated merchandise at Edion, Bic Camera and Yodobashi Camera stores.
Yet another Reveal the Shield redeco with the Motorbreath retooling, Convoy is cast in clear red and black plastic. He has been retooled to include a magnet in his right foot, allowing him to interact with Lost Age Battle Command Optimus Prime and Age of Extinction Stomp & Chomp Grimlock. Convoy was available at a variety of 2014 events, including on May 3 at a "Kids Walk" event at Fuji Speedway, in special packaging on May 16 at the "Transformers Celebration 2014" midnight event at the Sunshine City Toys"R"Us store in Ikebukuro, on June 15 at Tokyo Toy Show 2014, at the Aeon Mall in Kasukabe on July 19, and at the "Transformers Expo" event in Yokohama on August 9. Convoy was also available as one of three preorder bonuses for Cloud Roadbuster.