Unlike the other Swordbot toys, Optimus Exprime's kabuto helmets form an integral part of one of his alternate modes. The kabuto helmet designed for use with his DaiGekisou combination forms the head of his dragon form, while the kabuto helmet designed for use with his DaiKenzan combination forms the "tail" of the same. He comes with two HUGE swords (with 5mm handles) which can be attached to several places on his kabuto helmets or either alternate form, held separately in his hands, or held both in the same hand (with one held in reverse-grip).
Thanks to fellow Seibertron user, Sabrblade, we have discovered some new in-hand pictures of the forthcoming Transformers Studio Series #38 Voyager Class Transformers Bumblebee Optimus Prime figure! These come couresty of YouTuber TonTon Reviews, presumably as a preview of his next review. For comparison, they have put this new entry into the Studio Series with MP-10 and Takara Tomy's Movie Advanced series "Classics Optimus Prime" (Evasion Mode Optimus Prime). This gives us a good - Read More
Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.
The Hot Rod from the future animated movie continuity would also appear. Target: 2006 had Hot Rod, Kup and Blurr timejump from 2006 (specifically partway through the Transformers movie) to 1986 to thwart Galvatron's scheme, under the influence of Unicron; later post-movie stories revealed that Firebolt had died on Earth years before 2007, and Space Pirates had Rodimus Prime briefly reverting to Hot Rod during the Quintesson attack on Autobot City. This Hot Rod also appeared in several of the "Aspects of Evil" stories. Told from the flashbacks of an aged Rodimus Prime, these had Hot Rod come up against some of the greatest Decepticon villains. He accepted the surrender of Scorponok - only to wind up defending him and a human town against the Micromaster Air Strike Patrol: defending Autobot City from a full-scale attack by Shockwave: and being captured and used as a pawn by Megatron to flush out an Autobot spy in his ranks. (Marvel UK #223-227)
This figure was originally conceived by Hasbro to be another character (exactly who is unknown), rather than Optimus Prime, but Takara insisted that the toy be made into Optimus to help it sell well in their markets, as the vehicle mode was no particular draw, given its scarcity in Japan. Reportedly, the figure cost twice as much as other Alternators to construct, so Hasbro had to bow to this demand so Takara would help fund it. Ironically, Takara eventually wound up soliciting the figure not as Prime, but as his Super-God Masterforce lookalike, Ginrai (perhaps connected to the Powermasteresque headsculpt), before its Japanese release was cancelled and moved over into the Kiss Players toyline (see below).
Today, generally the creator sets only emphasize Lego as a building system. They come with pieces and instructions for two alternate models. Generally, Creator sets utilize a more basic color selection and look less “realistic” due to the emphasis on a versatile piece selection. Contrast that with current licensed themes and even Lego’s own proprietary themes. Themed/licensed sets are now trying to achieve more “realistic” models. As a result, piece and color selection skews toward more specialized pieces and colors again making the “critical mass” of pieces harder to achieve.
The Hasbro stock photos of the toy is slightly mistransformed: his pectoral armor is not folded correctly in robot mode. At least a very small number of units feature a faceplate-less head sculpt which was probably intended for a later retool, but so far there is no news about this pretool being released in the future. This figure was also released in Toys R Us Japan in May 1st, 2017 as a store exclusive, likewise identical to the Hasbro release.
Here is another thing, people complain about the presence of stickers in a LEGO set. I have news for them, stickers keep down the cost of a set. The latest modular building will have stickers with it, but it isn’t the last time a set geared toward adults will have stickers with it. At least LEGO listened to our wishes and got rid of STAMPS (Stickers across multiple pieces). Still that modular will be the only set that will have a red baseplate and printed golden star tiles. Translation, that set will be very hot on the secondary market when it is retired. It is going to be very hard to source out the baseplate if people try to build Palace Cinema by sourcing its parts. (Which is a project some are doing with Cafe Corner and the UCS Falcon)
After the events of Transformers Animated the Stunticons set up a Stunt Convoy show in the city of Kaon and use it as cover to attempt to break Megatron out of his detention at Trypticon. Their attempts are thwarted thanks to the efforts of Cheetor, Optimus Prime, and Sideswipe. The Stunticons are placed in detention with Megatron and an attempt to rescue them was made by the Decepticons Blot, Mindwipe, Oil Slick, Scalpel, Sky-Byte, and Strika.[143]
But up first, as we said, is The Last Knight. The teaser trailer was released earlier this month and boy did it tease a doozy: it depicted Optimus Prime and Bumblebee fighting. Yes, the two old pals, mentor and protégé of sorts, were locked in fisticuffs, the Autobot leader giving Bee a sound pounding. There are a number of theories as to what’s going on there, but what we do know is that it promises an intriguing storyline for our favorite yellow robot, and it may well lead directly into the plot of his solo flick.

Generations "Combat Hero Optimus Prime" is a metallic-blue, gunmetal, and red redeco of United Laser Optimus Prime, having the retooled tab, and being based on the canceled Generation 2 Combat Hero Optimus Prime figure, sporting a red mouthplate inspired by the official catalog image for the unreleased toy (packaged samples had featured a traditionally colored gray mouthplate). He comes packed with a (vaguely) Generation 2-styled Deluxe Class Autobot Jazz, as well as unchanged releases of Generations Legends Class Thundercracker and Motorbreath.
In a rare move, there were no brick and mortar store exclusives in Western markets for the regular Prime line. The "Rust in Peace" special edition of Terrorcon Cliffjumper was available at San Diego Comic-Con and Hasbro Toy Shop, while the "Dark Energon" series of translucent redecos was sold by online retailer BigBadToyStore. All of the "Dark Energon" toys were available at general retail in Singapore and Malaysia, and the Voyager Class figures were also available at general retail in the Philippines.
Distant Thunder was ultimately unsuccessful, but as the universe started to rip apart, a black Optimus Prime clone appeared. The Binaltech universe was split into its own separate continuity, while the original timeline was also restored, stabilizing the multiverse. The clone, friendly to the transformers, proclaimed that the Binaltech universe must be allowed to continue, as it was important to the future. Optimus Prime questioned the black doppelganger, who explained only that he carried "the Protector's" spark, but refused to reveal any more detailed information. Soon after, the clone, who was originally developed by Dr. Archeville as a weapon of evil, ejected the spark that had invaded and taken over the black figure, reverting to its original evil programming. The malevolent Nemesis Prime, no longer just a black version of Optimus, escaped.
Prime's new trailer is essentially a heavily armed version of the original, with two double-barreled heavy laser cannons mounted on two arms with visible fists. The rear has a fold-down ramp to allow the storage of a smaller transformer, or perhaps spare accessories. The trailer can be transformed into a Powermaster battlestation that can allow other Powermaster engine figures to man the heavy laser cannons.
If you’re a child of the ‘80s and grew up with the original The Transformers cartoon, Bumblebee may have been the second Transformer you ever saw-- in the narrative of the show, anyway. In the first episode, “More Than Meets the Eye,” you would’ve started off by watching the memorable opening sequence. There, you first get a quick glimpse of a group of five Autobots in vehicle mode, including Bumblebee alongside Optimus Prime.

Animated Optimus Prime, in an Earth-based fire truck mode, appears as a hidden character in the Transformers Netjet video game by Hasbro. Instead of being leader of the Autobots, Prime was actually a washout from the Elite Guard. Despite no longer being a member, he maintains his military ranking of "Prime". The scale chart released for the series indicates Optimus Prime stands about 22 feet tall.[13]
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
Platinum Optimus is a redeco of the Leader Class Optimus Prime. Optimus' color palette is now darkened with some additional paint details. His "Sword of Judgment" is now a light blue. Optimus features more chrome on his "Vector Shield", chest, and on his head. The set was a shared exclusive, available from BigBadToyStore and Toys"R"Us, and was also sold during a Taiwanese event celebrating the launch of Transformers Rising.
Early in the war, when he was still known by the name Orion Pax, the Autobot who would one day be known as Optimus Prime was ordered by Zeta Prime to escort the Decepticon Prisoners Wrack'n'Ruin in a prisoner exchange, while accompanied by Nightbeat and Alpha Trion. As the group made their way through the Rust Spot, they encounter Slicers and had to fend them off. Orion Pax and his group eventually made it to their meeting spot with the Decepticon Bludgeon, only to be ambushed by the Decepticons. In the confusion, Alpha Trion was taken prisonner, and Orion Pax set off to rescue the elderly Autobot. He and Nightbeat succeeded in returning Alpha Trion under the protective custody of Zeta Prime, but Orion was himself captured in turn. Strapped to a shuttle aimed to crash into Iacon, Orion's fate seemed uncertain. Orion's Gambit
Transported to a parallel Universe, as the walls of reality began to crumble, foretelling the coming of Unicron to the Armada universe, Optimus Prime and Jetfire were reformatted by their Mini-Con companions using the Mini-Con Matrix into new "Powerlinx" forms. Optimus Prime and Jetfire combined to hold the chaos-bringer at bay. Unicron was eventually defeated by the united power of the Mini-Cons.
This version of Ultimate Class Beast Hunter Optimus Prime is exclusive to Cybertron Con 2013. While Prime itself is unchanged, he has been packaged in the box with his backpack plugged into his back, allowing the cannons to rotate when his spiky stomach-fenders are pushed down. The box itself also has slightly different text and graphical layouts, is encased in a large, slip-on outer covering, and features a designated number as part of the Thrilling 30 line.
Prime suffered a severe, though unfair, defeat when Megatron challenged him to one-on-one combat while imbued with the different abilities of all the Decepticons. Teletraan I, the Ark's computer, discovered the deception in time, and the Autobots were able to drive off the Decepticons. In "Prime Problem", Megatron created a clone of Optimus, which caused confusion with the other Autobots. Windcharger and Spike, however, were able to identify the clone before it led the Autobots into their demise.
If Optimus ordered his troops to come to the humans’ aid, they found themselves taking part in a struggle in futility, as the entire town was near-weightless, meaning they couldn’t put the humans anywhere where they wouldn’t float away once more. Then, the Autobots heard Decepticons approaching. Helpless in their current position, the Autobots were quickly eradicated by the Decepticons.
×