The main build of the set is a massive vehicle based on Optimus's truck cab, capable of seating a single Kreon in the driver's seat. Pushing the trailer-hitch on the back end towards the cab opens up the front grill, revealing a huge spring-loaded rocket launcher with rubber-tipped projectile. The cab can also stow the included stasis pod ussed to lock away the baddies.
He and Metroplex were soon rescued by Bumblebee and Ratchet and they promptly escaped back to Earth, just in time to rescue Grimlock from a Decepticon hit squad. After being misled by a phony distress call, Optimus and his team had to face an assault on the Ark. They repelled the Decepticon attack, but Prime decided that the time was right to go to Cybertron and liberate the Autobots whom Shockwave had enslaved. The Autobots again used the space bridge to reach Cybertron, and mounted an assault of their own on the Decepticon fortress. After fighting their way through the defenses, Optimus and Bumblebee faced down Shockwave himself, defeating the Decepticon with some help from Grimlock. Transformers G1: Awakening

The figure would have come in a monochrome version of the standard Henkei! Henkei! Convoy's packaging, still named "Convoy" but now labeled as part of the Gentei! Gentei range of exclusives.[8] Reportedly, this figure was intended as a Wonderfest exclusive, but was canceled because, according too TakaraTomy designer Shogo Hasui, it was too similar to Universe Nemesis Prime. Knockoffs were later made available, so buyers beware!

As the number of sets released has increased, the harder it has been for stores to parcel out their shelving space. In order to make more sales, decisions have to be made as to which sets will be carried. Not every store can carry the whole product line (not even all official LEGO stores carry the whole product line). This process will favor the sets that drive sales the most, such as the licensed sets. The traditional boxes of bricks are pushed out of the way for the more profitable lines.
The first Transformers toys were created from two different transforming robot toylines from Takara, the Car-Robots and Micro Change, from the Diaclone and Microman series, respectively. Hasbro acquired the rights to sell them in the United States but, instead of selling them under their original names, they were rebranded as "The Transformers". The first two years consisted primarily of reusing the Car-Robots/Micro Change molds. The earliest toys had some parts made of die-cast metal, which were eventually phased out.
Part of the sixth wave of Custom Kreons, and the first (and only) Robots in Disguise-themed wave, Optimus Prime uses the new 2015 Kreon construction with the hollow waist-peg and "raised" hands.. He comes with a buildable parts rack on which to hang/store his extra pieces. Unlike the previous Custom Kreons, he no longer features a chromed helmet, and comes with an extra clear-plastic helmet, torso, legs, and his arms, plus a chromed Bazooka (originally from the Kre-O Battleship sets), and some kind of a dual pick-axe with a clear red staff.
During the promotion of the Transformers films, Optimus Prime appeared in several commercials. Optimus Prime, along with other transformers, were featured in several commercials for General Motors. Scenes with Optimus Prime were used in several General Motors commercials.[68] A commercial for the Discovery Channel featured Optimus Prime singing part of a promotional song.[69]
A second die-cast vehicle representing Prime was also part of the Mini Car Collection, this one a red redeco of Majorette toy #291, a Chevrolet K-10 pick-up. To distinguish it from the other Optimus vehicle, this one is randomly allocated the "Super Mode" label, and features an image of the leader in his powered-up form on is hood in addition to the Autobot symbol and series logo.
The first release in the Asian-exclusive Asia Premium Series toyline is an extensive redeco of the previously-Japanese exclusive Striker Optimus. He features a comprehensive paint scheme directly based on Jetpower Optimus Prime, with blue pinstriped flames, lots of silver paint, and vacuum metallized parts, although his hands are left unpainted in favor of painting his mirrors silver. Along with his standard accessories, he also comes with 2 battle blades, which were previously exclusive to Toys"R"Us Japan. He features the "We must stop the Decepticons!" voice chip, but batteries are not included. Rather helpfully, his instructions are supplemented with text instructions written in English for all the steps, as well as the additional photographs used for the previous Striker Optimus toy.

When Optimus and Hound eventually made their way there, they found that C-81 and his gang of criminals had escaped prison and were combating the Waruder soldiers responsible for the planetary shutdown. Optimus mistakenly assumed that C-81 and his goons were there on purpose, and joined them in fending off the invaders. They were soon joined by Burn Out and Lift-Ticket, who informed the Cybertronians that they had stumbled across the Waruders' main hive. Lift-Ticket explained the Waruders could be repelled if he managed to get a sample of the hive's venom. Optimus was willing to go along with Lift-Ticket's dangerous plan, despite C-81's skepticism. However, the battle came to an end when C-81 managed to grab a hold of the Waruders' leader, and forced the bug into peaceful negotiations. Optimus agreed to allow the Waruders to migrate to another Cybertron via C-81's illegal interuniversal gate, in exchange for a venom sample that would be used to create an anti-toxin to revive the TransTech. The General nonetheless impounded C-81's gate afterwards, though he did let the criminals "slip away" as thanks for their part in thwarting the Waruder invasion.
The set is a counterpart to TakaraTomy's simultaneously-available Transformers Animated Sons of Cybertron set, which also features translucent versions of that line's Deluxe Optimus Prime and Rodimus figures. It was intended as an exclusive for the Japanese Chara Hobby 2010 festival, but was also initially offered as a raffle prize at the 2010 "Autobot Alliance" event in the Philippines.,[1] and was later available for purchase at Cybertron Con 2010 in Shanghai.
Replacing the weapons of the Hasbro releases, these new Mini-Cons transform into their larger parnter's signature weapons. They came as unassembled, unpainted model kits, similarly using stickers to fill in details. Several Arms Microns also came by themselves in bagged kits, plus there was a metric ton of promotional Microns throughout the line, possibly more than any prior line (even Micron Legend!), and that's not counting the ones that were released during the First Edition series. The Arms Microns also had multiple 5 mm posts and holes, and could be combined into super weapons, plus the larger toys were retooled to have new Arms Micron mounting points.
In "Endgame" 2-parter, Ratchet builds Optimus a jetpack attachment to help in the coming battle against the Decepticons. After some initial difficulty, Optimus is able to get the hang of the device, only to be shot down by Starscream's female clone, Slipstream. Though Ratchet urges Optimus to use the Magnus Hammer, he is reluctant to do so, given his past with Ultra Magnus. In the end, he wields the weapon as the Lugnut-controlled Omega Supreme clones land on Earth. During the fight, Optimus manages to master the Magus Hammer's power in order t overwhelms Megatron to the point of being acknowledged by name. After a devastating battle, the last remaining Omega clones self-destruct due to Starscream's intervention. With Prowl's sacrifice, the Allspark is rebuilt into one as it forms a barrier around the Omega clone, along with Optimus and Megatron. Prowl's spirit pulls Optimus from the bubble just as the clone self-destructs with Megatron still trapped inside. Prime laments Prowl's passing before defeating a heavily damaged Megatron and sparing him the deathblow, saying that Megatron does not deserve the "easy way out". He and his team return to Cybertron with Omega Supreme, the captured Decepticons, and Prowl's body and are greeted as the hero he had wished to be so long ago. The reconstructed Allspark, having a structure similar to the G1 incarnation of the Autobot Matrix of Leadership, is hung around his neck.
The China KO has been out for years. It's about 95% the same quality as an official product. The average price is $35-$40 shipped from China. Do not purchase from buyallhappy as this seller fraudulently claims to ship from Los Angeles but ships from China and prices the toy much higher. The seller also ships in a crappy cardboard box and the toy will likely arrive crushed. Most China sellers will use 6 pieces of thick styrofoam as a box which is much more durable.
Leader class figure, this is his form used in the Cybertron television series. Can combine with Leobreaker (or Nemesis Breaker) and/or Cybertron Wing Saber, and can use Metroplex's axe or Vector Prime's sword. At first, Optimus Prime's (Galaxy Convoy in the Japanese version) alt-mode is a futuristic firetruck, although some believe it to be some sort of mobile weapons platform (the show itself treats it as a firetruck). This can also transform into a wing mode, with wings and cannons on each side of the truck. In addition to his standard robot mode, he can combine with his rear 'trailer' section to form a heavily armed super mode. That trailer section can also form an independent weapons platform, usable by anyone. His face, designed in the classic Prime style, merges the two mouth-plate elements - a slitted version to expose his mouth, like Beast Wars Optimus Primal did on the television series and a full mouth-plate which can rise to cover it.[60]
A highly CG-accurate sculpt of Optimus Prime's head with a built in voice-changer. It also has several sound effects and quotes from the movie. The voice-changer has three settings, giving more accurate alteration of the user's voice (though this is still debatable; most voice changing technology is pretty crummy, at least in toys). Much like the Ultimate Bumblebee figure, this toy will hate your wallet too. While it only costs 30 bucks, if it's anything like another Hasbro voice changer, it will suck batteries up like they were some kind of square candy holder.
Released alongside a Sega Mega Drive version of Megatron and outside of any other toyline, "Optimus Prime featuring Original PlayStation" transforms from robot to a scaled-down non-functional Sony PlayStation video game console. He features an opening disc compartment and comes with two accessories, a memory card and a controller that splits in two and attaches to his lower arms to act as blasters.
The term Generation 1 is a retronym; the series was simply known as "Transformers" until the release of the Generation 2 series. However, the term has become semi-official, as both Hasbro and Takara have referred to this era as "Generation 1". New characters are still occasionally added to the line, primarily by E-hobby. (Examples: Sunstorm, Hauler, Detritus, and the like.) Large-scale production of new characters in this line ended with the onset of Generation 2. Transformers fans often are very upheld with the G1 community. This has led to controversy among fans who consider G1 to be the only "pure" form of Transformers.
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
In Transformers: Autobots, Optimus Prime meets up with the other Autobots to give further commands to his troops. Create-A-Bot, the new rookie, is eager to help in the cause, but Optimus tells him to sit back while the other Autobots fight the Decepticons. Create-A-Bot finally defies orders and completes a mission against Optimus's council. After nearly getting himself and the other Autobots killed, Create-A-Bot apologizes to Optimus personally. Taking pity on the newcomer, Optimus lets him off with a stern warning, and they move out together to face Megatron, who has absorbed the power of the Allspark. Optimus fights Megatron, but Megatron gains the upper-hand. Optimus is on the verge of defeat when Create-A-Bot takes the Allspark and drives to Megatron's chest, weakening Megatron but mortally wounding himself in the process. Optimus fights Megatron again, defeating him. As Megatron is on the ground, he tells Optimus that if he kills him, the Allspark will be destroyed and Cybertron will never be restored. Optimus says to Megatron that he will do what he must do, then he raises his sword and kills Megatron, destroying the Allspark in the process. Create-A-Bot also dies, but not before telling Optimus his final request to make Earth the new home of the Autobots and to protect the humans. The game ends with Optimus sending a message to all surviving Autobots taking refuge among the stars.
There is also a smaller "Legends of Cybertron" Micro sized version of this Optimus Prime, without a trailer, and a Burger King Kid's Meal toy, again without a trailer. There is also a rotating sucker holder version of Cybertron Optimus Prime. Later releases of the Leader class and Micro class Optimus Prime were repainted in darker colors, supposedly representing Optimus Prime after the television story. This toy is called Galaxy Force Optimus Prime. A special metallic painted version of this toy was included with Megalo COnvoy in Japan.

Following our last article on in hand images of Studio Series 38 Voyager Class Optimus Prime (from the Bumblebee film), TonTon Reviews (who put up the in hand images), has come through on what they said and posted their review! This review allows us to get the best look at the toy yet, as well as its surprisingly complex transformation. We see the ion blaster included stores between his legs in truck mode to fill in the gap and hold it togethyer. The backpack in robot mode also has 5mm - Read More
This unusual iteration of Optimus Prime is a redeco of Beast Wars 10th Anniversary Optimus Primal, transforming into a robotic gorilla in the pseudo-technorganic-looking style of the other Jungle Planet toys. He comes with a Jungle Planet Cyber Key stamped with the code d7s9, which plugs into his flying surfboard accessory to reveal a spring-loaded missile launcher. His brown and cream deco seems inspired by Donkey Kong, while the scar over his beast mode eye seems intended to homage Peter Jackson's King Kong.
If there was one thing the toy planes of yonder were lacking, it was controllability. Guaranteed crash landings and the subsequent walks of shame to go pick up the pieces started to wear a little thin. The advent of radio-control provided an answer for that. But for model builders Aviation Design, that was child's play. Hense, the birth of the FALCON 7X business jet.
Across the assorted continuities of the original Transformers universe, there have been various interpretations of Optimus Prime. One of Prime's most notable characteristics over all continuities his unswaying commitment to leadership by example. The animated series' version of Optimus Prime is depicted as a straightforward, wise, and upbeat battlefield general. Additionally, the animated series' version of Optimus dislikes rap music, putting him at odds with music-loving characters like Blaster and Jazz.
In search of new energy sources, Optimus led a team to central South America. When they spotted Mount Sheelah, their two human friends John and Tim Gordon explained volcanoes, and, believing it to be of possible use, the Autobots went to examine it. During a battle with the Decepticons over the volcano, Optimus was convinced by the two humans to retreat, ultimately saving them when Mount Sheelah erupted. Terror of Mount Sheelah After discovering that the Decepticons were kidnapping humans, Optimus sent Bumblebee to scout the Decepticon base. When Bumblebee returned with the Decepticons' global crystal, Optimus was able to use it to blackmail the Decepticons into letting the humans go. Bumblebee to the Rescue
This miniature model kit of Energon Optimus Prime comes unassembled and unpainted, moulded mainly from white, red and black plastic and featuring some stickers for essential detail. Standing at around 4.5 inches tall, he comes with his Prime Force drones and can combine with them in the usual ways; while Fire-1, Gyro-2 and Digger-3 are moulded in their normal colours, Submarine-4 is stuck being black, and like every other non-color-molded, non-stickered detail on the kit, must be painted by the buyer. Prime's transformation involves removing his feet and head (an alternate Super Mode head is included, as his antenna does not transform into a helmet), and he does not come with a trailer for the Prime Force, but his gun can shoot small orange plastic BBs via a pressure-launching mechanism, and he comes with a small gold-chromed Energon star that fits onto his left shoulder. The kit also comes with "Episode 1" of the "Optimus Prime VS Scourge" mini-comic, printed on the back of the instructions.

(translated from the Japanese Wikipedia article) The Transformers: Kiss Players was a Japan-only line of Transformers toys, manga, and audio dramas released in 2006. Kiss Players is set in an alternate Transformers universe where the Transformers are powered by the kisses of young girls. The toys themselves come packaged with small, scale figurines of the girls who power them. The toyline was openly admitted to be aimed at a specific part of the market — adults, rather than children. The comic that accompanied the Kiss Players was an unashamed reflection of this, with several images which were considered by some to be very sexually themed.


Released as part of the Single Pack assortment, Optimus Prime is a show-accurate, non-transforming die-cast vehicle based on his alternate mode. He features through-axle construction, allowing for super-speedy racing on smooth surfaces, and his car mode is compatible with many tracks and playsets from Hot Wheels and Matchbox. He features 4 wheels, as opposed to the Legion Class' 6 wheels & his larger toy's 10 wheels. Optimus Prime also comes with a collector's flyer.

This Optimus Prime is a somewhat/nearly screen-accurate redeco of the Leader Class figure, but uses the original Leader mold instead of the Armor Knight retool unfortunately. In comparison to the first Age of Extinction Leader Class figure, his vacuum-metalized front truck bumper, sun visors, robot mode chest, smokestacks and side tanks chest was omitted, revealing the grey plastic underneath. His chromed chest was also stripped of chrome for adding paint operations, his shield was unpainted, and both of his sword and truck mode windows were casted in colorless plastic. He also features some extra silver paint on his robot mode forehead, and his white-colored Autobot insignia is slightly tampographed on the left. And lastly, his light-piping eyes is neutered by blue paint.
His trailer opens up into his Combat Deck, which features a missile-armed repair drone pod (with seating for one) mounted upon a boom lift arm. Situated in the base of this boom is a spring-loaded launcher that can be used to launch Roller out of the Combat Deck. Roller himself has seating for 4 passengers, and can be equipped to carry Optimus Prime's rifle or a fuel pump. The interior space of the trailer allows storage room for one Autobot car.
Being a brand new and intricate remake of the Autobot leader, MP-10 was used as the gold standard in terms of scale for future Masterpiece figures, with all the upcoming releases being sized to best match him. Much like his older incarnation, he was also cherished by collectors, generating heated debates on which version is the best one up to this day.[5]
The Optimus Prime Kreon in this set is based on the character's rusty, crusty "evasion mode" from the Age of Extinction movie. He has a ferrous-metal backpack, which is used to interact with the magnetic parts in the various sets. In this specific set's case, it's so he can be grabbed by the buildable Strafe's dino-claws, once Strafe uses said claws to open up the "laser" cage made to contain Optimus. (Yeah, we know Strafe appears way after Optimus ditched this look in the movie.)

The original Hasbro stock photos depict him as having red paint operations on his kneecaps and the sunken ridges around his blue abs that the final product lacks. The photos on the cardback show him with a red Autobot symbol on his truck door and blue plastic instead of grey for the piece just in front of his rear tires. The back photo also depicts his side windows as being the same translucent orange as the front ones, when they are, in reality, a garish solid orange.
Categories: Unreleased toysUpcoming toy releasesArticles in need of imagesAction MastersAlternators AutobotsAlternity AutobotsAuthenticsBot Shots AutobotsClassics AutobotsCloud AutobotsCombiner WarsCombinersConstruct-Bots AutobotsContest prizesConvention exclusivesE-HobbyGeneration 1 AutobotsGeneration 2 AutobotsGenerationsGeneration 2 Go-BotsGT charactersHenkei! Henkei! AutobotsKiss Players AutobotsMachine Wars AutobotsMail order exclusivesMasterpieceMusic LabelPlatinum EditionPower of the PrimesPowermastersQ-Transformers charactersReturn of Convoy AutobotsRobotmasters AutobotsSDCC exclusivesTimelines charactersTitanium SeriesTitans ReturnToys "R" Us exclusivesTransformers with three modesUnite Warriors AutobotsUnited AutobotsUniverse (2008)War for Cybertron: Siege
I am so not in for this, it will still look arguably better then MP-01. But the true MP Optimus Prime is MP-10. This new one is all about animation, and the backpack is pretty huge. MP-10 has a built in part for weapon storage... it was not actually needed. Idk about this new direction. I’ve been pretty much exclusively 3rd party and older MP’s. This new style of lavishly G1 animation is not for me. MP-10 was the standard and the perfect blend. For whatever reason Takara is/has been pushing a new direction that a good majority don’t really want to go in on. See Transformers 3rd party market. If there wasn’t a itch that needed scratching it wouldn’t exist.

Yet another rerelease of the original toy mold, this gift set of course includes the cab, combat deck trailer, and Roller. Hasbro stock photography of the set depicts Prime with full-length smokestacks, but this would not be the first time that stock photography does not accurately represent the final product. The set also includes a reprint of the first issue of the Marvel Comics series, as well as a DVD containing the entire "More than Meets the Eye" pilot. The set also features a battery-powered Autobot symbol that plays the classic transformation sound, speech recorded by Peter Cullen, and a snippet of the G1 series theme song.
GT-R Prime was racing against GT-R Saber and GT-R Maximus when they were rudely interrupted by GT-R Megatron, a ruthless racer out to prove his worth by defeating all others. A fight broke out, but Prime interrupted it and convinced Megatron that they all shared the same need for speed, persuading him to settle things with a race instead. Transformers GT: Mission GT-R

From this chart, you can see that there has been no real trend in the price per piece in these particular sets. The weighted average (larger sets weigh heavier than smaller sets) for the price is 13.19 cents per piece. The size of the ships did seem to increase in the last couple years; however, 3 data points does not make a trend (I will visit this idea later). For those of you who had a pirate ship growing up (I was lucky enough to get the Skull’s Eye Schooner), you may not have realized it, but it wasn’t cheap. And, the prices in this chart do not take inflation into account.
Of particular note to Prime completists is that this otherwise traditional reissue of the Generation One Prime cab has a brand-new head sculpt which is essentially a miniaturisation of the Masterpiece/20th Anniversary Prime's noggin. Not only does this give the "classic" Prime toy a more show-accurate head, it's also the first iteration of this familiar mould in which the head is actually poseable. Being one of the better-articulated early Generation One toys, Prime can finally look in any direction he can aim.
Available only at KB Toys, Machine Wars Optimus Prime is a redeco and slight retool of the European Generation 1 exclusive Turbomaster leader Thunder Clash, transforming into a Cybertronic truck cab. It's easy to see why Thunder Clash was chosen to become the new Optimus Prime, given his adherence to Prime tradition: the cab disconnects to become the robot, while the trailer unfolds to become an assault tower with twin missile launchers. On the original Thunder Clash version of the mold, the launchers operated on a gravity-feed system that saw a new missile drop into the launcher from above each time one was fired, allowing for twelve to be fired in rapid succession, but for Machine Wars Prime, this feature had to be dialed back for safety reasons. The missiles had to be lengthened to prevent choking hazards, and so the toy's launchers were modified to accommodate them, becoming straightforward spring-loaded single-firing weapons.
However, the situation was still so desperate that Optimus not only decided to recruit human allies The battle is far from over!, but aggressively tried to recruit and deputise human children, including giving them the power to co-ordinate Autobot teams in battles. He wouldn't even make a final move on the Decepticons until he had enough child soldiers on his side. Earthlings: THE S.T.A.R.S. need your help now! Have the Decepticons defeated us once and for all? In at least one case, this likely led to the death of a small boy at Decepticon hands. Can one boy, alone, hold back the evil Decepticons?
Outside the United States, this set was available in a thinner rectangular box. It contained all the original accessories from the American release, but not the DVD. An English-only version of this packaging format was available in Asia and Australia (initially only available at Myer stores, but later also at Toys"R"Us, Kmart and Target, eventually at drastically reduced prices), while a bilingual English/French packaging variant was available in Canada, still including—though not advertised on the packaging—the (English only) comic book.
When the Ark's sensors picked up two Transformer power emissions in the Brazilian rain forest of non-Decepticon origin, Optimus headed into the field to investigate, bringing along Jazz and Blaze. Though their search went poorly at first, the surrounding vegetation interfering with their energy trackers, one of the mystery Transformers soon found them! The source of the readings turned out to be two terrifying robot dinosaurs! As Optimus charged one of them, Megatron and his troops turned up, and blasted the Autobot leader unconscious. He awoke to find the Decepticons fleeing in defeat, and the creatures transformed into their Autobot forms. Grimlock introduced himself and Snarl, but told Optimus that they wouldn't be following the Autobots back to home-base, as they had two more companions to unearth first. Optimus bid him farewell with a handshake before leaving to carry on the war against Megatron. The Dinobots!
Optimus Prime's body was hauled out of the Arctic Ocean by the US military. While a terrorist organization run by the enigmatic Lazarus was able to seize control of several of the other Transformers that fell back to Earth, the military worked unsuccessfully to reactivate Prime. They eventually called in Spike Witwicky. Prime Directive #1 Spike was forced by the project chief, General Robert Hallo, to use his piece of the Matrix to reactivate Prime. Functional again, Prime used the Matrix to reactivate more of his fallen comrades. Prime Directive #2
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.
Categories: Art FeatherAstronBeelzeboss StudioBTS ToysCHMSDaCa ToysDMY StudiosDr. WuDream FactoryFansProjectFansToysGeneration ToyHeadrobotsHeerotoysmakerIGearImpossible ToysJunkion BlacksmithJustIToysKaziKOLDMaiden JapanMaketoysMastermind CreationsMasterShooter CollectiblesMech IDeasMGSPerfect EffectPlanet XPlay With This TooRenderformReprolabelsToyworldTransformersTFC ToysWarbotronX-TransbotsXovergenYom-GZenith Forge

The figure was re-released in Hasbro's Asian markets in 2012, with no known changes to the figure itself but several modifications to the packaging that makes it easy to tell the two releases apart: The flap containing the package art is omitted entirely, the "Commemorative Series II" label is missing, the age recommendation and safety warning labels, the "Changes from double tractor trailer to battle station to super robot!" call-out and the name of the toy have all been shuffled around (with the words "battle" and "super" being omitted in the process), and most notably, the toy is no longer named "Powermaster Optimus Prime with Apex Armor", but simply "Optimus Prime", with Apex Bomber's existence no longer acknowledged anywhere on the packaging.
Released as part of a new line called Transformers: Tribute, Orion Pax is a redeco of Titans Return Sergeant Kup, and transforms from a red-and-blue Cybertronic pickup truck which is also an homage to Generation 1 Crosshairs's vehicle mode G1 Optimus's e-HOBBY toy. His Titan Master, retooled from Flintlock, features a new face that is based on the Thrilling 30 Orion Pax toy. As a redeco of the Kup mold, Orion Pax still suffers the leg panel misassembly.
He comes with a shield with a fold-out handle, allowing Optimus to hold onto it with either hand in robot mode. It has a simple transformation gimmick for vehicle mode which is activated by pressing a button at the top of the shield, causing the sides to spring outwards. In vehicle mode, the shield can be laid flat across the bed of the truck, attaching via a post on the back onto the truck’s trailer hitch. Alternatively, the bumpers on the shield can be rotated outwards, and the front can be bent down in order to form a new front end and hood for "battle vehicle mode", resembling the Stealth Force vehicle modes seen in Dark of the Moon.
Rodimus also appeared in the Dreamwave Energon Comic. In this continuity Rodimus's history in unclear, but he seems to be a veteran Autobot assigned to Earth. He acts as a mentor to many of the less experienced Autobots: for example he was the first to congratulate Ironhide when he overcame his fears to defeat Tidal Wave. He was one of the defenders of Toronto alongside Hot Shot, Red Alert, Hoist, Beachcomber and Thrust, battling against Divebomb and a swarm of Terrorcon clones before receiving help from a very unlikely source - Megatron, resurrected in a new body by Optimus Prime. The subsequent counterattack routed the Terrorcons.
For Universe, a redeco of the Armada Super-Con Optimus Prime in more Generation 1-inspired colors was released in a Sam's Club exclusive five-pack alongside Runamuck, Longrack, Buzzsaw, and Blurr. Optimus was the only toy in the set different from the original releases. He came with a translucent red version of the remolded style of Cyber Key previously included with this mold's release during the Cybertron line, featuring a Powerlinx port to activate his punching gimmick.
Bumblebee - The Transformers live action film franchise's latest installment is out, with Bumblebee hitting theaters last week. The Seibertron.com Twincast / Podcast brings you its review of the movie, with one of its regular podcasters Jon Bailey bringing his insights after providing the voice acting talents for Soundwave and Shockwave in the film. Along with this insider perspective, the cast discusses each significant part of the movie itself, beginning with the "Generation One" inspired opening scene on Cybertron. The new human and robot characters presented in the Earth based adventures are also reflected on, with the cast agreeing that this latest movie is a measurable tonal departure from the approach of previous films in the franchise. After talking through the entire movie's plot and characterizations, speculation about what comes next for Travis Knight, Michael Bay, and the Transformers live action movies comes next. A quick chat about the movie's tie-in toyline follows, and the show concludes with a quick round of holiday season bragging rights about the cast's Transformers related gifts.
In "Endgame" 2-parter, Ratchet builds Optimus a jetpack attachment to help in the coming battle against the Decepticons. After some initial difficulty, Optimus is able to get the hang of the device, only to be shot down by Starscream's female clone, Slipstream. Though Ratchet urges Optimus to use the Magnus Hammer, he is reluctant to do so, given his past with Ultra Magnus. In the end, he wields the weapon as the Lugnut-controlled Omega Supreme clones land on Earth. During the fight, Optimus manages to master the Magus Hammer's power in order t overwhelms Megatron to the point of being acknowledged by name. After a devastating battle, the last remaining Omega clones self-destruct due to Starscream's intervention. With Prowl's sacrifice, the Allspark is rebuilt into one as it forms a barrier around the Omega clone, along with Optimus and Megatron. Prowl's spirit pulls Optimus from the bubble just as the clone self-destructs with Megatron still trapped inside. Prime laments Prowl's passing before defeating a heavily damaged Megatron and sparing him the deathblow, saying that Megatron does not deserve the "easy way out". He and his team return to Cybertron with Omega Supreme, the captured Decepticons, and Prowl's body and are greeted as the hero he had wished to be so long ago. The reconstructed Allspark, having a structure similar to the G1 incarnation of the Autobot Matrix of Leadership, is hung around his neck.
When the Decepticons tried to take control of a solar energy station, Prime sent Roller in to investigate. Megatron's Fight for Power Later, Prime sent Bumblebee to spy on the Decepticons' latest misdeeds, and the Autobots discovered that they were having trouble with the ion drive of their starship. Prime led the Autobots in an attack on the mine the Decepticons were using to test their propulsion system and routed Megatron's force. Autobots Fight Back
The Autobots subsequently returned to Cybertron aboard a refueled and repaired Ark with the defeated Decepticons, taking the Decepticons on Cybertron unawares and quickly capturing control Cybertron. Peace reigned for a time until a series of natural disasters began, the source of which was determined to be the planet Moebius in a parallel universe. The Autobots assembled a team to travel to this alternate universe and stop the threat; Optimus Prime personally led the team, unwilling to put anyone in more danger than himself. Wheeljack, Hoist, Jazz, Prowl, and Silverstreak constituted the rest of the team; they dubbed themselves Spy Changers because they aimed to achieve their goal with stealth and diplomacy. The team modified their bodies to match the native cyborgs using data acquired from the Sky Spy and traveled to the 22nd Strata but were soon attacked by the local Guardians, who mistakenly presumed them to be Renegades. The Spy Changers were then rescued by the real Renegades, who presumed them to be potential allies and took them back to their flagship, the Rogue Star. Renegade leader Cy-Kill attempted to court the Spy Changers as allies, but Optimus saw through Cy-Kill's deception. Eventually, the Autobots formed a secret alliance with the Guardians as well as discovered the cause of Cybertron's troubles: Renegade bases on Moebius were draining the planet's energy. The planet's geometry had turned it into a crude Dimensional Interfacer, and Moebius was tapping into Cybertron to sustain itself. Hoist was able to end the crisis by triggering the bases' remote detonation sequence. Cy-Kill was furious, but in the ensuing battle, the Autobot-Guardian alliance triumphed over the Renegades. Optimus Prime and Leader-1 shook hands as a symbol of the transdimensional friendship, and the Autobots returned to their home reality, secure in the knowledge that they had allies in places as distant as alternate realities. Ask Vector Prime, 2015/09/30
This small version of Energon Optimus Prime was released by Kabaya as part of their DX Transformers line of candy toys. Prime transforms in the same manner as the larger Energon figures do, though his arms have to be removed at the shoulder and reinserted into his back to form truck mode. The Prime Force were sold in a separate set in the DX Transformers series, and can combine with Prime to form his Super Mode. Optimus came with a stick of gum.
But in between those two most well-known alternate modes, Bumblebee has had at least six others. For the Transformers: Alternity Japanese toy line, he was a yellow Suzuki Swift Sport, which at least is still a small, quirky car. Ditto the AMC Pacer, the form he took when he travelled back in time to the ‘70s in a G.I. Joe vs. The Transformers crossover comic. Somewhat similarly, he’s a Supermini police car in the Transformers Animated series. But then he’s also been a couple of other muscle cars: as the Timelines Deluxe Goldbug toy, he’s a Chrysler ME 412 concept car, and in the Transformers: Prime animated series he can take the form of the fictional Urbana 500 muscle car. Bumblebee also has a number of different Cybertronian vehicle modes.

Thanks to fellow Seibertron user, Sabrblade, we have discovered some new in-hand pictures of the forthcoming Transformers Studio Series #38 Voyager Class Transformers Bumblebee Optimus Prime figure! These come couresty of YouTuber TonTon Reviews, presumably as a preview of his next review. For comparison, they have put this new entry into the Studio Series with MP-10 and Takara Tomy's Movie Advanced series "Classics Optimus Prime" (Evasion Mode Optimus Prime). This gives us a good - Read More
Main event time! Nitro figures are more like your traditional Generations/Power of the Primes deluxe bots. Standing at 7-inches, they feature increased detail, additional paint applications and all come with a core to unlock additional features. In addition to Barricade, Optimus Prime, and VW Bumblebee (this one’s my favorite of the entire line), the Nitro series will also have a Camaro ‘Bee.
The main torso-bot is based on Generation 1 Optimus's original body. Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). Another is based on live-action Optimus (Soundwave helmet), and the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
Eleven years after their arrival on Earth, Prime and the Autobots made a new human ally in Wataru Hoshinoumi when he stumbled into the midst of a battle between Prime's team and Starscream and Ramjet. Enter! The Transformers When Megatron joined the fight soon after, he held Bumblebee and Wataru hostage, daring Prime to make a move against him. Prime opened fire, but Megatron merely used the defeated Starscream for a shield, then turned his cannon on the younger duo. Prime unleashed his ion blaster and apparently deflected the blast with a shot of his own, saving Bumblebee and Wataru and prompting the Decepticons to retreat. The Emperor of Destruction Appears!
The project was crowd-funded through Japanese crowd-funding site Makuake[11]. For 5,400 yen, contributors received an INFOBAR Optimus Prime, or for 16,200 yen, received INFOBAR Optimus Prime, INFOBAR Megatron and INFOBAR Bumblebee, the only way to obtain the last two items. The project received one million yen in the first 24 hours, ultimately topping out at over 32 million yen.
The U.S. release of Super Fire Convoy had the Japanese voice replaced with an English voice (with the lines, "Optimus Prime, Maximize!" and "Autobots, Transform"), and Autobot insignias were added on the side panels. Much like the Japanese version, Optimus Prime's normal robot mode can combine with Ultra Magnus (sold separately) to form Omega Prime.[48]
A retool and repaint, including really shiny chrome, of Revenge of the Fallen Leader class Optimus Prime. In this version, his dark-blue is replaced with a more purplish color and his orange blades have become translucent with some silver. Also, his fuel tanks detach and combine to form his Ion Blaster and his mouth is now visible. Unfourtanetly, all that chrome makes it even harder for him to transform than the last prime. All of these new things make him even more accurate to the movie than his predecessor. Like the picture on the right says, Buster Optimus Prime was rereleased, this time with his mouthplate, in an exclusive set with a redecoed Jetfire.
The instruction manual for the MP-04S Convoy Sleep Version reveals a hidden message saying that Rodimus will be the next installment in the Masterpiece series. Concept sketches of the figure were released online in July 2010. The figure is a faithful modern recreation of the original G1 toy. Gimmicks include retractable binoculars, spinning saw blade and the Matrix of Leadership, but the figure's main feature is the ability to transform into both Hot Rod and Rodimus Prime. The transition between the two incarnations involves rotating the face, extending the legs and adjusting the spoiler on the back.
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.
Part of the first wave of Bot Shots Series 2 launchers, this new-mold Optimus Prime transforms into a very boxy Generation 1-styled truck with trailer. As a Spin Shot, one manually winds up his upper body beforehand when transforming him into vehicle mode, where striking the front of the vehicle will cause him to burst open and spin while auto-transforming. He comes with a launcher used to propel him to great speeds, as well as four cube targets for him to knock over.
The mid-range Voyager class Movie Optimus Prime toy transforms into an amalgamation of the Kenworth W900 and the Peterbilt 379, making this toy fairly inaccurate to the actual vehicle Optimus Prime turned into. Because of the smaller size and lessened complexity, the Voyager class Optimus Prime features a significantly different transformation sequence compared to the Leader class toy, and indeed, the actual CGI design. However, as the actual truck cabin no longer forms his chest, the cabin now features a small interior with opening doors and a non-removable cowboy-hat-bedecked driver figurine that flips out of the seat when the driver's side door is opened.
The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his Matrix of Leadership, as is a Movie-style Matrix cover (not pictured). He also comes with an alternate hand that allow him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands and helmet, for some reason...
The toy itself is a mix of different versions. The cab has the safety modifications, including the shortened smokestacks and longer missiles (and thicker rifle), but also has the modified hitch of the 2011 Chronicle DOTM two pack. Meanwhile, the trailer is the lighter grey version from the 2008 Universe release. This version also seems to suffer from mold deterioration.
×