Classics Optimus Prime was initially intended to be Deluxe-sized. An alleged list of the tentative Classics line-up[20] included a Deluxe-sized Optimus Prime without a trailer and a version with a trailer at the Voyager price point; however, it appears the decision was eventually made to upscale Optimus to Voyager size instead.[21] Don Figueroa's control drawings for the Deluxe version were leaked before the Classics line was even released at retail.[22] A gray model prototype was later shown as part of an interview with TakaraTomy's staff in Transformers Generations 2009 vol. 1.[23] It's unclear whether the trailer ever made it past the early planning stage before the size of the figure was changed.
The San Diego Comic-Con 2017 exclusive Optimus Prime figure is another redeco of the Premier Edition figure, which aims for a more movie accurate look than the original by still sharing the same paint masks, but replacing the chest's deco with flames and adding extra paint applications on the legs, arms, chest, head, tire rims, both sides of the engine compartment, and the sword and shield... but for some reason still sports the movie-inaccurate blue 'collar', as well as the smaller, less accurate vehicle flame tampographs instead of the more movie-accurate ones used on Dark Optimus Prime. His Autobot insignia is also moved on the upper back section of the air dam. He is packaged in a stylish, display-case-like-box similar to later Transformers: Alternators releases and the Hasbro Toy Shop/SDCC 2011 exclusive figure.
The instructions neglect to mention that the entire roof of the cab is on a concealed hinge which greatly eases the difficulty of Prime's transformation. For whatever reason, the instructions treat the toy as if the hinge does not exist, going so far as to show Prime's head magically clipping through his chest to transform. The instructions also neglect to mention that his heel/bumper pieces must be slid out until they click, making the figure just that bit more stable, and that the rotating truck door panels on his upper arms can be pulled further out (but not off) from their sockets, allowing more space for the panels to swing around his hood-arms during transformation.
Kiss Players Convoy is a redeco of Alternators Optimus Prime. While the figures may appear similar at first glance, given that Kiss Players Prime is still red, blue and black, there are many subtle differences, not least of all the replacement of the Alternators figure's bare, flat red plastic with a deep metallic red paint. Several of his body parts are cast in different colors of plastic (for example, his shins, formerly black, are now blue, while his formerly-blue hands are now black), and he features more intricate paint applications on his shoulders, and especially his pelvis, which is decorated to look like Prime's traditional bumper.

There is also the release of Optimus Prime as a deluxe sized brown gorilla which is a repaint of the Beast Wars 10th anniversary Optimus Primal toy most likely trying to tie Optimus Prime in some way to the jungle planet Animatros in the Cybertron series. According to his bio, Optimus Prime was temporarily mutated into this form by the Animatros Cyber Planet Key. The colors of this toy are a homage to Transformers: Universe Optimus Primal.


Also during this time, Micromasters were introduced, and would become one of the last sub-groups of Generation One. Micromasters were tiny Transformers created to compete with the Micro Machines, a hugely popular toy line of the time. While many of the figures had simple transformations and little detail due to their small size, the line eventually expanded to feature Micromaster Transports and Bases, in which Micromasters came with larger vehicles or bases that transformed.


JETWING OPTIMUS PRIME Black Ver. is a black, teal, and chrome redeco of Jetwing Optimus Prime exclusive to the Asian market. He appears to have been based on the cancelled TakaraTomy contest prize Jetwing Optimus Prime Black Version (see above), with a few color alterations here and there, plus the obvious addition of chrome. It was originally solicited by online retailers as the far goofier-sounding "Dark Nightwatch Jetwing Optimus Prime".
Legion Class Optimus Prime has been found at Family Dollar and Dollar General stores in the United States. A later variant repleaced the red Autobot insignia with a black version. This later version was also released at general retail in Australia, New Zealand, Europe, and Russia. In Singapore it was released together with Bumblebee and Starscream as part of the promotion for Age of Extinction in selected cinemas.
Partially constructed of die-cast metal, this small three inch figurine of Optimus Prime has a CGI-accurate sculpt compared to the larger toys, owing to the fact it does not need to transform at all. He is sculpted with his Ion Blaster in his right fist, and is articulated at the neck, shoulders and waist. He comes with a small movie-style Autobot sigil display stand.
The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his Matrix of Leadership, as is a Movie-style Matrix cover (not pictured). He also comes with an alternate hand that allow him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands and helmet, for some reason...
At some point, Rodimus learned that the world known simply as Planet Q was under threat from the world-devourer, Unicron, but arrived too late to prevent its destruction. Years later, however, he encountered the planet's surviving ruler, Alpha Q, and sided with him in his plan to use Energon to regenerate and restore all the worlds consumed by Unicron – a plan that put him in opposition with Optimus Prime when they encountered each other once again. When Megatron succeeded in reactivating Unicron, however, Rodimus relented and submitted himself and his troops to Optimus Prime's command, and they were integrated into the main Autobot force as the battles continued to defend Alpha Q's successfully-regenerated worlds against the Decepticons.
The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.

Millions of years later, Optimus was one of the thirty-five Autobots rebuilt into modern machines by the ship"s computer. Some time later, Jazz reported that he had spotted Decepticon activity at a nearby construction site. Optimus decided to take a proactive angle to their war with the Decepticons, and led the entirety of his troops to the Decepticon base. Once there, they found themselves allowed in by Megatron, feigning a friendly demeanor. Not fooled by Megatron's claims that he was making an honest living heading a construction company, Optimus engaged the evil robots in combat, before being blasted out of the Decepticon base. Optimus and his troops were sent tumbling down the cliffside beneath their feet. The Autobots suffered only minor damage from the fall, and after getting patched up, moved out once more to stop Megatron's plan, now well under way. Megatron was holding millions of humans hostage in a bid to get the Earth to surrender unconditionally to the Decepticons.


The first release in the Asian-exclusive Asia Premium Series toyline is an extensive redeco of the previously-Japanese exclusive Striker Optimus. He features a comprehensive paint scheme directly based on Jetpower Optimus Prime, with blue pinstriped flames, lots of silver paint, and vacuum metallized parts, although his hands are left unpainted in favor of painting his mirrors silver. Along with his standard accessories, he also comes with 2 battle blades, which were previously exclusive to Toys"R"Us Japan. He features the "We must stop the Decepticons!" voice chip, but batteries are not included. Rather helpfully, his instructions are supplemented with text instructions written in English for all the steps, as well as the additional photographs used for the previous Striker Optimus toy.
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt. However, due to the aforementioned lessened complexity, significant sacrifices had to be made, such as "cheats" to the transformation sequence to achieve this. He is thus less accurate overall than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. Nevertheless, he maintains a superb level of articulation and posability.
Cosmos warned Optimus about a fuel plant the Decepticons were building, so Optimus took the Dinobots in his trailer and, under the guise of having a delivery for Shockwave, invaded the construction site and defeated the Decepticons. After this victory, Optimus turned his gaze skywards, and thanked Cosmos for his contribution to the Autobot cause. The Autobot Spy in the Sky
This agenda led the Predacon Megatron to attack the comatose Optimus Prime in stasis on prehistoric Earth, forcing Primal to take Prime's Spark into his body in order to preserve his life while his body underwent repairs. Primal was subsequently mutated into the massive "Optimal Optimus" form, which shared elements of Prime's form, prior to returning the Spark to its rightful place. The Maximals were occupied throughout the remainder of the series protecting Prime and the other Transformers aboard the crashed Ark until the Predacons were defeated. Various monuments to Optimus Prime appeared on Cybertron in Beast Machines, one of them a holographic statue in Iacon that Megatron took control of in order to trick Primal.
A non-transforming model kit of Optimus Prime by Takara Tomy, sold exclusively in Japan. The kit comes with a pre-assembled inner frame that features a high rate of poseability similar to Master Grade Gundam model kits. The kit comes with two swords and two different sets of attachments for them: one set for the forearms and the other to replace the hands. Pre-ordered units of the first batch came with battle hooks.[138]

The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.
While the other Autobots searched for the Matrix on Earth, Optimus Prime searched for Vector Sigma, guided through the dangers of the planet's catacombs by the spirit of Alpha Trion. Prime eventually arrived at the computer, only to find his way barred by Cyclonus and Scourge. At that moment, Hot Rod arrived with the Matrix, the same with which Alpha Trion merged, re-energizing it. The Matrix transformed Hot Rod back into Rodimus Prime and, for the first time, the two Primes fought side-by-side and defeated Galvatron. Before Rodimus could implement the Matrix to stabilize Vector Sigma, however, Optimus Prime merged himself with the computer, restoring its balance to save the planet. Optimus Prime sacrificed himself, dying again only a few short episodes after his rebirth. Later, Prime would make a final and permanent return in the Japanese Transformers continuity, Battlestars: Return of Convoy. This entry was only available in print, appearing in the TV Magazine, a Japanese publication.
1 is the TF/ Evangelion crossover edition of MP 10 Optimus Prime. Honestly Im not familiar with Evangelion but OP in purple and green is just sick. 2 is the MP version of Sideswipe, but Takara calls him Lambor. 4 is the "marlboro edition" Diaclone repaint of MP Wheeljack. It was supposed to be released in March, but Phillip Morris blocked its sale in the U.S. bc they suck. Luckily my homeboy /u/dajoeker was able to help me get a hold of one.

This Japanese-exclusive reissue of the original Generation 1 Optimus Prime figure featured tinted blue windows, like those sported by the "Goodbye Convoy" edition of the toy, as well as show-accurate blue eyes. Prime came with all his original accessories, including both versions of his rifle, as well as a new die-cast metal Matrix of Leadership accessory, which could be looped around his neck on a removable chain. Additionally, the set included a show-accurate redeco of the Action Master Optimus Prime figure, a sheet of Autobot insignia stickers of varying sizes, and a mouse pad decorated with the Autobot symbol.
The original Optimus Prime toy started life as the Diaclone toy, "Battle Convoy", created by a team of Takara designers who came on board when the original designer fell behind. This team included Hiroyuki Obara (listed as the sole creator on the toy's patent) and famed mecha designer Shōji Kawamori. The toy transforms into two major components; the first component being a red and blue White Freightliner WFT-8664T cabover semi-trailer truck partially composed of die-cast metal, and the second component being a large silver trailer of currently-undetermined model.
×