In a completely different scenario, Optimus agreed to Prowl’s plan to go on the offensive and try and discover the full extent of the Decepticons’ plans. Optimus nominated Prowl, Bumblebee and Mirage to go along with him on the mission. The group refuelled with the gas that Sparkplug brought back from the Autobots’ secret storage area, and took off. The group soon happened upon the Decepticons’ lab in the middle of a barren, polluted wasteland.
A redeco of the sword-wielding version of Battle Masters Optimus Prime, Silver Knight Optimus Prime is a non-transforming "Rock 'Em Sock 'Em Robots"-like toy with arms that punch through the use of levers in his legs. He can also be placed on the included controller handle, allowing the punches to be activated with a pair of triggers. Optimus Prime was only available in a Target-exclusive two-pack with Grimlock.
Legends Class Optimus Prime is based on his original Generation 1 appearance. He features a fake grill for his robot mode, and his large legs result in a fairly thick and compact truck bed. He is part of "Reveal the Shield", a subline that outfits all its toys with rubsigns, and in this case, it's located on the left side of the truck/his left elbow.
Kiss Players Convoy is a redeco of Alternators Optimus Prime. Unlike the Alternators version's bare red plastic, he is covered in a deeper red paint. Some of his body parts are cast in different colours, such as his shins, and has a much more intricate paint deco based upon Masterpiece Convoy. He is armed with his small engine pistol and a pink surfboard that can be reconfigured into either two small blades or a large double-bladed sword.
During the period between December 26 2010 and January 31 2011, Hasbro ran their "Supercharge Your Holidays" promotion: for every $20 spent on Hasbro-branded product, customers could receive a free, random product from a list provided by Hasbro. Among the items on the list was "Transformers Activator & Speed Stars Mini Vehicle". According to this discussion thread on Allspark.com, Rally Rumble Optimus Prime (as the figure is listed in the thread) was one of the figures distributed.
But it is scary to think that there is a strong possibility they will look at redoing almost every Masterpiece now if this is a success. The MP+ releases have me feeling tired. I don’t have to get them but I have a completionist mentality. But a redo... I’m almost ready to check out of MP completely. I waited so long to get six seekers done pretty well to me. Now there’s a chance they will redo them. And soundwave. I sure hope I’m just being a worry wart.
Categories: Articles in need of imagesUnreleased toysCharacter stubs missing toysAge of Extinction AutobotsBattle Masters AutobotsBumblebee AutobotsConstruct-Bots AutobotsCostco exclusivesDark of the Moon AutobotsKmart exclusivesMasterpieceMovie AutobotsNESTPlatinum EditionQ-Transformers charactersRevenge of the Fallen AutobotsSam's Club exclusivesStudio SeriesTarget exclusivesThe Last Knight AutobotsTitanium SeriesToys "R" Us exclusivesTransformers (2010) AutobotsTriple ChangersWal-Mart exclusives
Ralston marketed many breakfast cereals based on cartoons in the 80s and 90s. One of these was Transformers. The Transformers Chocolate Flavored Cereal was a chocolate-flavored concoction, not unlike Cocoa Puffs, manufactured by the Ralston Corporation. However, the cereal was sold only in some parts of the United States and was short lived. The cereal box had Optimus Prime on its cover. The box claims the cereal had "more taste than meets the eye" and also had the ability to "transform ordinary milk into chocolate flavored milk". There also was a mail-away offer for a Jazz toy. The few boxes that still exist are collectables, (one of which went for $349 on eBay).
Forming a roughly 11-inch figure when fully assembled, Diablock Convoy is highly articulated, using 12 ball-jointed block pieces, giving him a range of motion similar to Masterpiece Prime, with the exception of the head, which can only move up and down, not side-to side. Speaking of the head, it is by far the most stylised aspect of the figure, with no real attempt to approximate Prime's face or mouthplate inside a simplified helmet, mainly featuring only a reversed block that gives the odd impression of a cycloptic eye. It is possibly intended to actually represent his forehead grill, as a yellow block inside his head construction remains barely-visible through a slit in his face, possibly intended to represent the classic toy's yellow eyes.
This Japanese-exclusive vacuum metalized golden redeco of Super Base Optimus Prime, whose name means "Shining Golden", was available as a prize in several draws, including a colouring contest held in the pages of TV Boy magazine, and in-store lottery draws at Tobu Department Stores. Between the draws, at least 58 "Kinpika" Prime toys are known to have been given away, making it one of the more widely available Lucky Draw figures, comparatively speaking. It came packaged in a plain white box, and including all the accessories and features of the standard release of the figure, including a gold-chromed Sparkplug (or "Prime", as he's confusingly known in Japan).
The paint deco is... unfocused, to say the least. In vehicle mode, the grill, headlights, and bumpers (and thus his feet) are painted silver, yet the red in the small Autobot insignia has been removed. There is silver paint on the fuel tanks (toy battery cover), but not on the other tool boxes and equipment in the same location. There is also silver paint on all 6 wheel rims, the air cleaners, and the windscreen visor. In robot mode, the silver paint is mainly located on his thighs and crotch, though in order to save on costs, the dark blue and gold paint on his thighs and knee joints have been sacrificed.
In Transformers: The Last Knight, he is brother-in-arms with Bumblebee who he fought alongside with to foil the Nazi Party in World War 2. He speaks with a thick French accent due to being stuck in France for so long, much to his own embarrassment. He wields a special gun which can briefly slow down time. He is also the only Transformer who is shown to speak in vehicle mode. 
Not depicted in the instructions or stock photos, Roller can attach to Prime in vehicle mode via two tabs on the vehicle front which slot into two corresponding slots on Prime's feet. Another undocumented feature is that the butt of the Ion Blaster can be inserted between the barrels of Roller's weapon mode to form a longer weapon. Also not shown in the instructions but depicted on the stock photo on the card-back is that Prime's shoulderpads can be rotated up; the intended positioning for this is notched, although you can position them at other angles.
A Deluxe-sized figure sold only in Japan and Asian markets by Takara Tomy. The package consists of a highly poseable skeletal frame called a Core Body, along with parts to assemble the Core Body to either a Protoform mode or robot mode. In Protoform, the figure can transform into an atmospheric Entry Mode. The figure with robot parts is able to fully transform into vehicle mode.
With the acclaimed Studio Series line marching onward triumphantly into 2019, we have just received a new review of the line’s latest offering, Battle-Damaged Megatron, which most of us know emulates Megatron’s appearance following the climactic final showdown between him, Optimus Prime and the Fallen in the second film. The review comes courtesy of YouTuber PrimeVs.Prime, who has thus far extensively catalogued the line beyond today’s subject. He goes into detail regarding the detailing - Read More
Available with Grimlock, this Optimus Prime is a redeco (or possibly a repaint) of the figure above, featuring extra paint applications on the chest and thighs, and he features a different flame pattern on his side doors. His Autobot insignia is now tampographed on his right arm. The cyberglyphs on his front hood is confusingly translated as "PRIME". The 2-pack also comes with a card, which the glyphs being decoded as "DINOBOTS". Optimus Prime and Grimlock also saw release as a Toys"R"Us Japan exclusive, making this Optimus Prime redeco/slight retool to be first sold at Japanese markets.
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
In Transformers: Armada and Transformers: Energon, Optimus Prime shares the role of main protagonist with Rad, Alexis, Carlos, Starscream and Hot Shot. The Optimus of this universe shares many similarities with his parallel universe versions, including nobility of spirit and a strong desire to protect all humans on Earth. In this continuity, the two sides are not looking for energon, but a small race of power-enhancing Transformers known as Mini-Cons. Optimus led his small band of Autobots to stop Megatron from acquiring their power for himself.
Though Optimus was a master marksman, he had a personal policy against shooting directly at his opponents' bodies during his races. In one such race, he allowed his rival to take the lead so that he could use his favorite weapon, the Impact Wrench Gun, to blast the road beneath the other racer's feet, causing him to lose his balance. Transform in a gust! When GT-R Megatron burst onto the scene, roaring that all previous races had failed to "ignite his warrior's spark," Optimus readied to give him the race of a lifetime. GT-R Megatron Attacks! Like other racers, GT-R Prime attended photo shoots alongside Misaki in order to promote coexistence between humans and Transformers. The Work of the GT Sister Race Queens? When a reincarnated Unicron attacked the Transformers GT finals and absorbed the huge energon pool saved up for the final prize, Prime restored his true power by using the "Matrix In" process to recombine with Misaki. Together with the other powered up racers, he fought and defeated Unicron, saving the Earth. The True TFGT
I mean you could argue that they are returning to the way the original Transformer toys worked. Here is an example of the OG Optimus toy. I went to Hasbro's website to see what the most current version of Optimus is that they are selling and I found this. That actually looks surprisingly similar, though I would argue they have gone more of the direction of making the robot look more robotic and the truck a little less truck like but its still a solid middle ground.
The toy itself is a mix of different versions. The cab has the safety modifications, including the shortened smokestacks and longer missiles (and thicker rifle), but also has the modified hitch of the 2011 Chronicle DOTM two pack. Meanwhile, the trailer is the lighter grey version from the 2008 Universe release. This version also seems to suffer from mold deterioration.
The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno. The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.
After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.
The sequel series, Transformers: Generation 2, began an undisclosed period of time later. At the beginning of the series, Prime was restored to a form resembling his original body. He and the Transformers found themselves caught in the schemes of a new generation of Cybertronians, led by the icy Jhiaxus, who were colonizing and cyber-forming other worlds. Plagued by nightmarish visions of a life-destroying entity called "the Swarm", Prime looked into Cybertron's past and discovered that Jhiaxus and his kind were the result of an unintentional Transformer reproduction. Their nature and intent, he found, was distilled to the purest, most unemotional form of conquest and that the Swarm was the by-product of this process. To fight this new enemy, Prime and the Autobots entered into an alliance with the recreated Megatron's Decepticons. Though Prime was eventually consumed by the abomination and destroyed, he was able to unleash the energies of the Matrix into the Swarm, purifying it. In parting, the Swarm recreated Prime in a new form, and he and Megatron set out to lead the united Autobots and Decepticons into a new age.
Released as part of the Energon Igniters Power Plus Series subline, this Optimus Prime is a Scout-sized mold that converts from robot to truck based on his appearance in Age of Extinction in just a few steps. His only articulation is the swiveling upper arms & pivoting arm joints, and his fuel tanks also doubles as a flip-out cannons, activated in vehicle mode. As with all Nitro and Power Plus figures, Optimus also comes with an energon core, which allows his vehicle mode to propel forwards.
We say "intended", because in actuality, the thing appears to have been produced in such huge quantities that it's wound up being made available in loads of other places—it was handed out at San Diego Comic-Con 2011, offered as a free giveaway with any order that included Transformers toys on Hasbro Toy Shop), as a free gift on the cover of the Awesome Autobots Activity Book, and came as a free gift attached to, of all things, issue #240 of the UK children's comic, Doctor Who Adventures (but not the UK's Transformers comic, you'll note!).
Sometime after the Autobots and Decepticons awoke in the 1980s, the original Megatron gained access to one of Earth's Voyager spacecraft and inscribed a message on the disk on board. In the event that he lost the War, Megatron left instructions for the descendants of the Decepticons to use transwarp technology to travel to Prehistoric Earth, locate the Ark, and change history by killing Optimus Prime. The Agenda (Part 2)
Though Optimus allowed himself to be destroyed when he betrayed his own moral code while playing a video game, a copy of his mind survived on a floppy disk. Years later, he was restored as a Powermaster, binary bonded to the Nebulan, Hi-Q. Optimus Prime slowly earned the respect of Decepticon leader Scorponok, mourned the loss of his friend Ratchet, and ultimately sacrificed everything to defeat Unicron. Though Optimus died again, his mind persisted in Hi-Q, and the Last Autobot was able to restore him as an Action Master in time to bring a temporary end to the war.
There is also a smaller "Legends of Cybertron" Micro sized version of this Optimus Prime, without a trailer, and a Burger King Kid's Meal toy, again without a trailer. There is also a rotating sucker holder version of Cybertron Optimus Prime. Later releases of the Leader class and Micro class Optimus Prime were repainted in darker colors, supposedly representing Optimus Prime after the television story. This toy is called Galaxy Force Optimus Prime. A special metallic painted version of this toy was included with Megalo COnvoy in Japan.
Prime was brought back to the Autobot base for treatment, but the Decepticons exploited the Autobots' lack of manpower and struck again before Prime recovered. With his men taking a pummeling, the unconscious Prime had a vision of Akira, who spurred him on to awaken and rejoin the battle. With another power boost from Wataru, Prime unleashed a super-charged shot from his ion blaster that took down the fleeing Decepticons. Time of Resurrection
This set's Optimusses are based on the Prime incarnation. The larger Optimus is a smaller, simpler build than the first big kit, and makes use of ball-and-socket parts for increased articulation. It also carries a spring-loaded missile launcher. The Optimus Kreon's tampographs are based directly on the Prime cartoon model, though he carries an energon axe akin to the one from the War for Cybertron games. He also has a clear-blue extra "energon" torso piece.
Many Transformers come with tech specs (short for technical specifications) printed on the back of the box that they are sold in. The owner of the new Transformer is encouraged to cut out the tech specs and save it. This card has information on the Transformer, and will usually include the character's name, picture, indication of allegiance (Autobot, Decepticon or other), function, a quote, a description of the character, and numerical values of the character's various attributes. Although only the numbers can be truly deemed "technical specifications", the entire card is usually referred to as the Transformer's tech specs. Each specification is rated by a value from 1 to 10, 1 being the lowest, and 10 being the highest.
The BK tie in toy of Optimus Prime is essentially two toys in one. The first part of the toy consists of two truck halves, which snap together around a sculpted robot mode Optimus Prime. The truck is squat, and primarily blue, with outbursts of chalk gray paint and red flames. Pulling back and letting go activates the gimmick: Prime "drives" forward and bursts from the truck mode, "transformed" to robot mode. This gimmick has marginal success.
A Walmart exclusive set featuring a redeco of the first Cyberverse Commander Optimus Prime figure, featuring moderately brighter colors and paint, while his jetpack and rifles are now black, with the jetpack's wings having silver flames. He also lacks the flame pattern on top of his hood, and features different flame patterns on the sides of the hood.
In "Human Error" Parts 1 and 2, Soundwave captures the Autobots with the help of his minions, Laserbeak and Ratbat, in order to brainwash them. Part of Soundwave's elaborate scheme consists of tricking the Autobots into thinking they have turned human. Optimus Prime's human form is a male caucasian in his early 20s wearing a red jacket. Sari forms a group of "Substitute Autobots" which consists of Scrapper, Wreck-Gar, and Snarl, to rescue them. They free the Autobots from Soundwave's control and Optimus grabbes Laserbeak to engage in a guitar vs. keytar battle with Soundwave, who used Ratbat. Optimus smashes Soundwave and Ratbat into pieces using Laserbeak in guitar mode, but Laserbeak grabs Soundwave's surviving components and flees.
This Kabaya candy toy of Cybertron Optimus Prime transformed into cab mode through disassembling into its component pieces and being rebuilt, hence the line's name of Blockformers. He came with his hand-held rifle, and a stick of chewing gum. Each figure in the Blockformers line came with additional pieces that could combine with Prime to either make his trailer in vehicle mode, or convert his robot form into Super Mode. Prime himself came with his missile pod/shoulder brackets, his leg armor and guns, his right cannon came with Leobreaker, his backpack and wings came with Override, his Super Mode head came with Scourge, and his left cannon came with Evac.
This line features robot versions of various Star Wars characters. Confirmed figures are Darth Vader, Luke Skywalker, Boba Fett, Commander Cody and Jango Fett. Darth Vader turns into his custom Tie Fighter while Luke Skywalker turns into an X-wing. Jango Fett and Boba Fett become Slave I, and Commander Cody turns into a Turbo Tank. There is combiner of Millennium Falcon of two characters, Han Solo and Chewbacca and Primus/Unicron-like Death Star that transforms into a giant Darth Vader. There are more Star Wars characters into Transformers like General Grievous and Obi-Wan Kenobi. This line was later revived and merged into the Transformers: Crossovers toy line, many more Transformers included characters from Star Wars: The Clone Wars like Ahsoka Tano who transforms into her Jedi starfighter, and Captain Rex who transforms into an AT-TE.
The Goldbug change happens in many different continuities, but in the original animated series, it happens like this: while trying to rescue the body of the dead Optimus Prime, which was being held by evil humans, Bumblebee’s damaged by Superion so badly that they have to rebuild him as a more powerful Throttlebot. His new body is much shinier, so a restored Optimus Prime dubs him Goldbug. In the Shattered Glass continuity, he goes evil as Goldbug. And in the IDW comics, confusingly, Goldbug was never affiliated with Bumblebee, but is the leader of the Throttlebots.
The Autobots and the Decepticons came to a distant world in the grip of an ice age. Assuming alternate modes based upon the dominant (though doomed) indigenous creatures of this planet, they continued their ancient, unending war. However, the Autobots, with their energy levels dangerously low, withdrew from combat as the world grew colder. They sought refuge in a deep cavern and entered stasis lock, awaiting the day when surface conditions changed to better suit their operation. Hearts of Steel #1 Optimus lay under the Mare Rurek Glacier. Infestation 2: The Transformers #1 Millions of years later, Bumblebee was awoken by the hammering of humans working on a rail line. He briefly considered awakening Optimus Prime, but thought better of it. After discovering the world had changed significantly, Ratchet thought there was no reason to awaken Prime. Hearts of Steel #1 When Bumblebee discovered the Decepticons were once again active on this world, Ratchet and Prowl agreed that the Autobots must intervene, but again decided out of rousing Optimus from his slumber. Hearts of Steel #2
Created with the specific purpose of producing an Optimus Prime as accurate to the original animated series as possible, the toy is exceptionally poseable, partially constructed from die-cast metal, features rubber tires and vacuum-metalized plastic and is heavily detailed, with sliding pistons in its joints and working spring-loaded suspension in vehicle mode. The figure also contains multiple non-intrusive gimmicks, such as a moving mouthplate to emulate Prime's traditional method of speech, flip-up communications panels on the forearms depicting images of Bumblebee and Starscream, and an opening, light-up Matrix chamber in the chest, which contains a removable vacuum-metalized Matrix of Leadership that can also be pulled open.
In the aftermath, Victorion believed trying to find the Requiem Blaster was a fool's errand, and that they should have been preparing Optimus Prime's funeral instead. The Swamp Megatron often thought of Optimus, noting the similarities between him and Optimus Primal Primal and wondering what his old rival would think of his heroic exploits. Consequences Ultimately, thanks to his connection to the Matrix and the Primes, Optimus's spark was freed from the Well and revived after Megatronus's defeat, to the joy of his companions. Mourning the sacrifice of Megatron, whom he considered a brother, he commended Optimal Optimus for being a fine choice as the new Matrix-bearer, and began teaching him the ways of Cybertron, promising to support him in his new leadership role. Saga's End
In reorganizing the company, LEGO became more efficient. The data shows that they have been able to standardize costs and it is likely that they were able to hedge the price of plastic against future price fluctuations. In protecting their business, they have also been able to normalize prices for their customers. A stable price is good for everyone; it helps LEGO ensure that future production costs are budgeted for and it helps the consumer manage their budget. This allows LEGO to protect and grow its market share.
The first in TakaraTomy's Hybrid Style series, Galaxy Convoy is a partly die-cast figure with scaled-down equivalents of the accessories that came with the Leader-class figure. This highly-intricate figure retains all the transformation abilities of the original figure—vehicle, flight mode, robot, and Super Mode—and even its Cyber Key-activated features (even coming with two keys so they can be deployed simultaneously), with additional touches like spring-loaded mechanisms that snap his cannons into place, and hand-grips on the weapons for Super Mode. While he does lack electronics or firing missiles, Prime still includes his Matrix, super-tiny yet still removable, and has four alternate sets of hands: two clenched fists, two with pointing index fingers, two with splayed palms, and two curved hands for holding his various weapon handles. Given the figure's small size, a reconfigurable head was infeasible, so it also comes with an alternate Super Mode head with a mouthplate and crests deployed, though the standard head must be attached in order for the figure to be transformed to vehicle mode.
This Optimus Prime is a minor redeco of the One-Step Changer figure, omitting the paint apps on the knees, the flames on his shoulders, and changing the robot mode chest's deco. Along with his wavemate Bumblebee, Optimus Prime loses his pin on his leg, which is used to activate Stomp & Chomp Grimlock's pop-out weapons and gimmicks. As with the first wave of the Turbo Changers, Optimus features a nearly invisible tampograph on his vehicle front, which can be revealed with Mega Turbo Changer Dragonstorm's UV-powered Cyberfire gimmick.
As leader of the Autobots, Prime headed up their mission to search for new sources of energy to revitalize the depleted Cybertron. Optimus vowed to Elita that he would return from his mission for her, but just before the launch of the Ark, Optimus was mistakenly led to believe that Elita was killed. Shortly after its launch, the Autobots' craft was attacked by the Decepticons' space cruiser, the Nemesis, and boarded by Megatron and the Decepticons. In the ensuing struggle, the G-forces of a nearby planet pulled both craft down, and the Autobots' ship crashed into a volcano, thrusting all the occupants into emergency stasis. Four million years later, in the Earth year 1984, a volcanic eruption jarred the ship's computer, Teletraan I, back to life. The computer reactivated the Decepticons, programming them with new Earth-based disguise modes. As a parting gesture, Starscream fired upon the Autobot ship, creating a landslide. The vibrations from that landslide knocked Prime into the path of the computer's restoration beam, restoring him to life, thus beginning the war anew on Earth.
Jetwing Optimus Prime is a retool of Revenge of the Fallen Leader class Buster Optimus Prime, with an accompanying large jet pack and massive dual Gatling Cannons. The base Optimus Prime figure has several modifications including: a new stomach area and elbow flares to reflect the changes to Optimus Prime's CG model in Dark of the Moon, modified lower arms to incorporate MechTech ports and clips for the cannons, and a retooled area under his back so the jet pack can fit on more securely. The dual energon blades mounted on his arms have been removed. The toy retains Buster Optimus Prime's electronics, but batteries are not included.
Once combined, DaiKenzan has three new phrases (spoken in Kenzan's voice), while DaiGekisou has four (in Gekisoumaru's voice). In either combined form, pressing and holding the button activates an additional, longer phrase for their "final attack". DaiGekisou is armed with a scissors-esque "shuriken" made from combining Optimus Exprime's two swords, while DaiKenzan simply wields them separately.
Hot Rodimus also appeared in the Japanese exclusive Kiss Players storyline. In the alternate timeline of Kiss Players, Hot Rodimus has given up the Matrix to Ultra Magnus after his actions in hurling Galvatron out of Unicron's body resulted in the Decepticon leader crashing into and devastating Tokyo, rather than landing on Thrull, as seen in the original continuity. He subsequently came to Earth to try to repair relations with the humans, but was instead attacked and nearly killed by a Legion Creature, a hybrid created from Galvatron's Unicron-corrupted cells fusing with local creatures. He was saved by a kiss from the human Li Shao-Shao and reformatted into a body resembling a Ford GT. He went on to battle the Earth Defense Command (an anti-Transformer organization), the Legion - and Optimus Prime himself. Prime had been resurrected in a Kiss Player body, but Hot Rodimus, believing his commander to be dead, thought it was a trick.
In The Transformers: Devastation, Hot Rod is repaired and reformatted into a Dodge Viper. Dealer tried to convince him to pull some strings to get him to Earth, but Hot Rod and Wheeljack had the more important task of rescuing Ironhide. They ran into a bit of trouble with the Machination's Headmasters. They managed to escape temporarily, but were found and Wheeljack was incapacitated. Hot Rod easily held his own with the Headmasters, and noted that for some reason they had lost their "edge". He received a little help from Hardhead, who was mainly there to take Hot Rod and the others back to the Ark-32 for evacuation to Garrus-9. Hot Rod refused to go, wanting to see the Headmaster mystery through to the end. Hardhead reluctantly let him go.
In Transformers: Decepticons, Optimus Prime lands on Earth along with the other Autobots to stop the Decepticons. Optimus does not appear until Megatron is released and Starscream escapes with the Allspark. Optimus fights Megatron, but is defeated and is killed while Megatron gives chase to his traitorous second-in-command. In the 2009 Revenge of the Fallen video game by Activision, Optimus Prime is among the playable characters.
The "Underbite Jetpack Takedown" Optimus Kreon uses the new 2015 style of Kreon hips and torso, with a hollow hip-peg and a central post inside the torso for increased grip... which also makes them incompatible with about four years' worth of Kreons. Based on his appearance in Robots in Disguise, he features a new version of the Optimus helmet, this time lacking a moutplate. He attaches to an included jet pack, armed with two pressure-launch missiles.
A redeco of the Dark of the Moon Deluxe Class toy, this Optimus Prime has large portions of his body, mostly his truck parts, vacuum metallized silver, and his light-piped eyes were neutered by blue paint. He comes with a redeco of Generation 1 Rampage's sword, which can be wield by his 5mm-compatible hands (Although not shown in the instructions). As his body, legs, and front truck kibble were chromed, care must be taken while transforming, especially with the shoulder kibble & the bottom leg's posts (This can be amended if you slightly widen the holes with 3mm hand drills). As with the original Dark of the Moon Deluxe Class figure, the instructions did not mention about forming the sleeper part until step 10, the pinky finger prevented the sword to peg down through his hands, and of course: his truck mode can attach with the Armored Weapons Platform included in the Chronicle or the Movie Trilogy Series figure. This figure has slightly loose shoulder joints.
Optimus Prime is composed of two parts, his truck cab and his trailer. His new truck cab is reminiscent of the original Optimus Prime truck cab, but is constructed entirely of plastic, lacks vacuum-metalized plastic and has no clear windows. It also transforms differently in that the front of the truck is no longer the robot mode's chest. His chest is now formed out of the truck's cabin rear, styled after his cartoon appearance. He is armed with two long black rifles, based in part upon his cartoon rifle.
Voyager figures all feature a spring-loaded MechTech-style transforming weapon, partially constructed from translucent plastic, which lights up via LED when the weapon is deployed. The figures themselves also feature translucent plastic, so the moving LED creates the image of energon power "flowing" from the character's bodies into their weapons. This worked better in theory than in practice. Internally, these figures were referred to by Hasbro as "Powerizers".
Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster stored in the form of the fuel tanks on his back, and a shell cannon stored on his back, two retractable energon blades that extend from both forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, two retractable energon hooks on both of his forearms, and bladed knuckles. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.
An absolutely incredible 28 seasons in, The Simpsons writers and producers have had to be unbelievably creative in coming up with a new couch gag for more than 600 episodes. They’ve had a doppleganger Simpsons family walk in on the family, the whole town has absurdly squeezed into their living room, and we’ve toured the inner workings of Homer’s body.
Ten years after Unicron's defeat, Cybertron was seemimngly at peace, but Optimus still feared another attack from Unicron. Although the Autobot High Council dismissed his fears, a mental link with Primus confirmed that Unicron was still alive. Megatron's disembodied spark, trapped within the chaos-bringer, called out to Prime. Events overtook Prime as Unicron's four Horsemen, Rhinox, Airazor, Cheetor, and Terrorsaur, attacked Cybertron, devastating it. Prime's link with Primus allowed him to upgrade himself into his Energon form and drive them off.
In this set, both the buildable Optimus Prime and the included Kreon figure are in the style of Beast Hunters Optimus Prime. In addition to the robot mode having a buildable shield and sword, both it and the vehicle build have two firing missile launchers. Additionally, four hands are included, with two possibilities for each arm. These Optimus Primes come with a buildable Predacon beast Lazerback and an Energon Kicker Kreon.
Like the original Warrior Class Optimus Prime, the figure features an undocumented feature: His axe can be stored on his vehicle mode trailer. Additional features include storing the axe onto either of his leg hooks, combining the launcher with either of the swords at their hilt, and storing the launcher underneath the vehicle. In a neat bit of engineering, he can fully transform with his swords attached.
All of the Tiny Titans were sold blindpacked. However: there's a tiny clear window in the back to peek at the item inside, making the task of getting the ones you want easier. Every collectible card included in Tiny Titans has a scannable insignia sticker on it. Scanning the badge unlocks a random amount of Energon "currency" and a randomized bonus power-up item, and can only be scanned once per day. It's honestly quicker and less redundant to say which toys don't have this feature.
This incarnation of Optimus Prime first appeared in the Transformers: Universe comic series in issue #2. As part of Omega Prime, he was escaping with various other Transformers from Unicron. He appeared again at the end of issue #3, brought in to Alpha Trion's lab to aid Optimus Primal. After this, both Prime and Magnus became part of Optimus Primal's army of Autobots, battling against Unicron's Decepticons.
Part of the first wave of Transformers: Robots in Disguise Hyperchange Heroes, Optimus Prime transforms from a futuristic trailer truck to robot in just 3 easy steps! His arms & legs serve as his trailer, while his chest serves as his truck front. He is also one of the few Robots in Disguise Optimus Prime toys which does not feature a faux window chest in robot mode. Both of his arms are articulated with 5mm holes in each hand.
The largest Movie Optimus Prime toy (until Revenge of the Fallen, that is), Leader Class Optimus Prime features the most accurate representation yet of the CGI designs' complex transformation sequence, the only difference being the arms which are placed behind the cab while they constitute the hood in the CGI model. He transforms into a heavily-customized Peterbilt 379 conventional extended-hood, and unusually for a mainline figure, he has rubber tires on all his wheels. His Ion Blaster weapon is stored in the rear of the truck's bunk, exposed like an engine block. Though Optimus has no trailer, he has a hole where the fifth wheel (known among fans as a 'hitch') is sculpted in the rear of the truck, should owners find a suitable trailer to use. Due to safety reasons, the tips of his long smokestacks are made of rubber. A switch on top of the cab roof activates horn sounds and window lights.
Legends class Optimus Prime is an extremely simplified toy of the extremely complex movie design. As such, he features numerous unavoidable inaccuracies, such as not transforming or even looking very much like the original design or the larger toy versions in robot mode. However, proportionally Legends class Optimus Prime is not far off from the real truck and the Leader class toy's vehicle mode, aside from missing a smokestack on the driver's side. He is articulated at the shoulders and upper legs via ball-joints.
Hot Rod is featured again in Maximum Dinobots. Returning to Earth to continue his search, Hot Rod arrived at the gates of the Machination's complex, and Scorponok prepared himself to deal with the intruder. Unfortunately, Hot Rod found himself fighting well out of his weight class as he was man handled by Scorponok, who cheerfully bashed his face in, put out one of his optics and snapped his leg. The Headmasters dragged him into Scorponok's control room where, with absolutely no prompting, the big man explained his entire plan for the Dynobots, Skywatch and the Machination. Hot Rod seemed less than impressed with this rather mundane approach, which ticked Scorponok off enough for him to point out that it was obviously just the first stage in his master plan. He was also warned to remain awed or he'd be of no further interest. When the Dynobots and newly arrived Monsterbots seemed to turn Scorponok's plan on its head, Hot Rod burst out laughing, at which point, Scorponok ordered him taken out and shot. In the lift to the surface, Hot Rod suddenly erupted in flames, killing his captors, but draining his power supply. Weakened and with a crippled leg, he collapsed on the floor.
This Optimus Prime is a non-transforming truck that is loaded with a number of gimmicks: Pressing the back button activates his Weaponizer-sque (or Stealth Force-sque) battle mode on his truck form, with the lights being emitted in the same time. He features both spring-loaded (truck front) and pressure-firing (both sides of the launcher) discs, with a flat character art of Slipstream & Sawback being sculpted on it. Optimus Also comes with additional Slipstream and Sawback figurines, which they can be (uselessly) attached on Optimus Prime's truck top & both sides of the launchers.
We know that despite starting his fictional life as a lovable, horn-headed robot who could turn into a Volkswagen in Generation 1, Bumblebee's most well-known these days as a round-headed robot who turns into a Camaro. In fact, younger viewers might not even realize he was ever anything but the Chevy muscle car. But there’s one quirky continuity where he’s able to switch between original and movie modes at will.
This Optimus Prime is a new mold that matches the character's more cartoony and simplified appearance in the Q-Transformers: Mystery of Convoy Returns cartoon. The "Watashi ni ii kangae ga aru" added to his name means "I have a good idea" (私にいい考えがある). A line originally spoken by G1 Optimus Prime at various times in the Japanese dub of the original cartoon, it has a reputation as a catchphrase of his among Japanese fans and has been reused by many Optimus Primes since, including the Prime in the Q-Transformers cartoon.
Power of the Primes "Evolution Optimus Prime" transforms from a truck with a trailer into a robot and back. The individual truck transforms into his "Orion Pax" form based on his appearance in the Generation 1 episode "War Dawn", and he is able to form the core of Optimus Prime's robot mode. His trailer forms Prime's entire body, and his ion blaster can be split into two weapons. He includes the Matrix of Leadership, which can store in his chest in the 'Evolved' form. The center of his Matrix of Leadership can be replaced with any Prime Master. In an undocumented feature, his rifle can be stored on his back as Optimus Prime by pegging it into Orion Pax's hands.The Takara version of the mold lacks the production numbers located at his right shins. Depending on the individual copy, Optimus Prime is prone to having a number of quality control issues: ranging from two left/right arms and/or legs/feet on the evolution armor, to lacking stickers on the trailer pieces.
Outside the United States, this set was available in a thinner rectangular box. It contained all the original accessories from the American release, but not the DVD. An English-only version of this packaging format was available in Asia and Australia (initially only available at Myer stores, but later also at Toys"R"Us, Kmart and Target, eventually at drastically reduced prices), while a bilingual English/French packaging variant was available in Canada, still including—though not advertised on the packaging—the (English only) comic book.
The first Unicron Trilogy Optimus Prime toy transforms into a longnose truck cab of made-up model. His clear-plastic smokestacks can detach and form a double-barrelled pistol that he can hold in robot mode, and a button on top of his head causes his mouthplate to jiggle up and down as if he were talking (the irony being that while this was a familiar trait of G1 cartoon Optimus Prime, in the Armada animated series, this Prime's mouthplate remained static when he talked). He can also hold a large cannon that is stored within his trailer, and his chest flips down to reveal a (non-removable) Matrix of Leadership. He is packaged with his Mini-Con partner Sparkplug.
But around the mid-’90s, Hasbro let the trademark for a toy named “Bumblebee” lapse. At that point, the Generation 1 Transformers were almost passé, as they focused on the newfangled Beast Wars and Beast Machines lines. In fact the Unicron Trilogy continuity (mid-2000s) character called Hot Shot was originally going to be called Bumblebee, and in fact had a lot of Bee’s personality traits and yellow color, until they realized they couldn’t use the name. Fortunately, they got it back soon after.
As the final new-design Optimus Prime toy from the original Generation 1 era, the Japanese-exclusive Star Convoy was a significant departure from previous versions. This incarnation of Prime transforms into an extended-hood cab truck of made-up model pulling an implausibly large trailer, incorporating the motorized "Microcarrier". Powered by four AA batteries, the Microcarrier drives Star Convoy either forward or backward, spinning a radar dish mounted on the rear of his trailer as he rolls along. Prime's teammate in the Battlestars, Grandus, can link up to the rear of Star Convoy's vehicle mode and be pulled along behind him; Sky Garry can then land atop Grandus, forming a giant vehicle.