LEGO is not ignoring the lower priced market, however. As we can see from the chart below, the average price of a set of LEGO has been relatively stable since the 80s2. Even with the average piece count of sets increasing over time, the average price has remained stable. This shows that for all the larger expensive sets being released, they are also releasing plenty of average priced sets that balance out the average. Not only has the size of sets increased but so has the number of sets released per year (prices are in US dollars).
Bumblebee may be beloved, but so is Optimus Prime and writers have seemingly killed off Optimus a million times in different continuities. So it can’t be too much of a surprise to know that Bee has met his maker on a few occasions as well. In the “Dark Cybertron” storyline of the IDW Generation 1 continuity, Decepticon Shockwave goes mad with power and wants to destroy all Autobots and Decepticons. In the process, Shockwave kills Bumblebee and sets off a chain of events that leads to retribution against Shockwave.
After many battles on Earth, Optimus died by standing purposefully in the path of the Hydra-Cannon built by Megatron from the three Mini-Con weapons, the Star Saber, the Skyboom Shield, and the Requiem Blaster. He managed to partially reflect the beam, damaging the Hydra-Cannon. It was the Mini-Cons themselves, however, who resurrected him, entering the Matrix and reconstructing a new body for him. Subsequently, Unicron forced Optimus to face the dark part of his soul and that, on some level, he enjoyed the thrill of combat. Following Unicron's defeat, Optimus's denial was sorely tested as Galvatron, an upgraded Megatron, forced him into one final furious battle. The battle ended when Starscream sacrificed himself to end the circle of hate that powered Unicron. Floating through space, Optimus found the Matrix, but said he did not deserve it. Before beginning the battle with Galvatron, he was upgraded by the minicons. His red torso turned black and he was able to battle Galvatron one on one.
With the major threats taken care of, Optimus Prime turned his and the Autobots' attention to identifying and shutting down the rogue projects taking place across Earth using stolen Binaltech technology and secrets. It was during one of these missions that Optimus Prime faced off against Nemesis Prime, both in Binaltech Dodge Ram forms. Initially, things looked bad for Optimus Prime, as he was no match for his opponent's spectral armor. However, the Protector merged with Prime, and the enormous power that resulted allowed Prime to reflect Nemesis Prime's final attack, obliterating the evil Decepticon. Optimus Prime recalls the union of the two sparks being familiar, from an event in the distant past. Optimus Prime is reassured by the Protector about "the seeds of the future" and the Protector is revealed to be Optimus Primal.
The largest Movie Optimus Prime toy (until Revenge of the Fallen, that is), Leader Class Optimus Prime features the most accurate representation yet of the CGI designs' complex transformation sequence, the only difference being the arms which are placed behind the cab while they constitute the hood in the CGI model. He transforms into a heavily-customized Peterbilt 379 conventional extended-hood, and unusually for a mainline figure, he has rubber tires on all his wheels. His Ion Blaster weapon is stored in the rear of the truck's bunk, exposed like an engine block. Though Optimus has no trailer, he has a hole where the fifth wheel (known among fans as a 'hitch') is sculpted in the rear of the truck, should owners find a suitable trailer to use. Due to safety reasons, the tips of his long smokestacks are made of rubber. A switch on top of the cab roof activates horn sounds and window lights.

Of particular note to Prime completists is that this otherwise traditional reissue of the Generation One Prime cab has a brand-new head sculpt which is essentially a miniaturisation of the Masterpiece/20th Anniversary Prime's noggin. Not only does this give the "classic" Prime toy a more show-accurate head, it's also the first iteration of this familiar mould in which the head is actually poseable. Being one of the better-articulated early Generation One toys, Prime can finally look in any direction he can aim.

Part of the first wave of Age of Extinction: Generations Voyager Class toys, "Evasion Mode Optimus Prime" is an all-new figure based on the character's initial form in the film, transforming from a cab-over semi truck into a robot mostly similar to his previous movie design. The truck mode is heavily based on Generation 1 Optimus Prime's White Freightliner WFT alt mode in both sculpt and deco, although it draws a few details, such as the singular smokestack and wheel designs, from the heavily faded Marmon 97 seen on-screen. In robot mode, he sports faux-kibble windows and, amusingly, two false smokestacks. Unfortunately, due to being used with the transformation, he lacks the real elbow joint on the arm, which makes the lower section of the arm the only poseable section. Also, Optimus can wield weapons with longer posts while his arms are in a "default" 90° position.

Adventure Lucky Draw Optimus Prime is a gold vacuum metalized redeco of the original Warrior Class figure (save for some of his unpaintable thighs & upper shoulders) released as a prize for the Transformers Adventure prize draw campaign held between 25 July 2015 and 30 September 2015. To obtain it, entrants needed to send in four robot points clipped from the packaging of Transformers Adventure products.

After the Great War, Optimus Prime disappeared with other legends into the mysterious location on Cybertron dubbed J'nwan, where Optimus himself became the "Authority" who spoke on behalf of the others. Sandstorm, the leader of a rebellion in a 32nd-century firmly under the heel of the tyrannical Shokaract, entered J'nwan to plead with the heroes of Cybertron's past for aid. He hoped to convince them to join the fight against the Predacon warlord. After a mind-crushing journey which left all of his companions dead or deranged, Sandstorm finally found an audience with the Authority and his brethren, but they declined to help, with the Authority stating that their time was past and the war was no longer their war. The Authority then in some way manipulated Sandstorm's trip out of J'nwan such that it was comparatively short and simple. Paradox

At some point, Rodimus learned that the world known simply as Planet Q was under threat from the world-devourer, Unicron, but arrived too late to prevent its destruction. Years later, however, he encountered the planet's surviving ruler, Alpha Q, and sided with him in his plan to use Energon to regenerate and restore all the worlds consumed by Unicron – a plan that put him in opposition with Optimus Prime when they encountered each other once again. When Megatron succeeded in reactivating Unicron, however, Rodimus relented and submitted himself and his troops to Optimus Prime's command, and they were integrated into the main Autobot force as the battles continued to defend Alpha Q's successfully-regenerated worlds against the Decepticons.
Interesting work but I would like to know whether you would find the amount of new sets offered in toto has changed over the survey period. Is there an economy of scale at work? This seems to have two implications: first, the number of units for a particular set may have increased thereby affecting the price of all sets belonging to that class (but doubtful you could find exactly how many Death Star sets were produced in relation to, say, hogwarts castles); second, the popularity of certain set classes may affect what kinds of sets are available. Like with language, we are all confined to use the words we know. And so with Lego, set designers are confined to use what’s economical, unless, of course, the design calls for new styled pieces. These relations are difficult to grasp in statistical analyses, but would seem to play a role in price steering.
"During the Cybertronian Civil War, Sentinel Prime was killed. Prior to his destruction, he bestowed the Matrix of Leadership to Optimus Prime, who became the new leader of the Autobots. Despite being one of the youngest Cybertronian leaders, Optimus demonstrated extraordinary courage and wisdom in the war against the Decepticons. He: treated all lives with benevolence, fought for freedom and peace, and continues to fight to protect the weak and maintain their beliefs.
When Robotmasters G1 Convoy was turned into a Lucky Draw figure, the color scheme into which he was redecoed was chosen through a children's coloring contest held in the pages of the December 2004 issue of TV Magazine. The winning entry was a... startling mixture of blue, orange and two shades of green, earning the toy the fan-appointed nickname of "Crayola Convoy". As with all Lucky Draws, it is extremely rare, with only ten units produced.
Designated "Optimus Prime" rather than the traditional Japanese "Convoy", this figure is a redeco of the previous Music Label Convoy figure into the character's traditional red, blue and silver color scheme. Unlike previous re-issues of the mold, iPod Optimus Prime's sports a paint application similar to KissPlayers Convoy, having its ABS/PVC parts painted over with a thin layer of his iconic red, white (silver if you will) and blue motif paint applications (with the exception of his iPod docking trailer). This includes his trailer, though the effect is somewhat marred by the large, visible gap on one side. When reconfigured into dock mode, the interior surfaces surrounding the speakers are decorated with black-on-silver techno-patterns as well as three "Optimus Prime" logos. The recessed space also features a stylised, almost Frank Milleresque, high-contrast portrait of Prime's face, although this is largely covered when an iPod is inserted. The figure comes in identical packaging to the original Music Label Convoy, save for the addition of a sticker illustrating the different color of its contents.

Optimus awakened to the sound of Ratchet's voice. Taking in his surroundings, he noted that he was now in an organic forest, surrounded by unfamiliar Cybertronians. It soon dawned on him that he had been transported to the dimension where Megatron had intended to begin his conquest: the OG World. The 'bots surrounding him were the local counterparts to his own Autobots, including his own doppelgänger! The locals informed him that they had found him thanks to the help of his "companion," a small robotic girl. Before Optimus could puzzle out who this humanoid was, the group came under attack by the local Megatron. Though badly injured, "Cloud Optimus Prime" had the strength to fight alongside "G1 Optimus Prime" against the Decepticons, and protect the girl that had brought the Autobots to him. During the fight, blasts from both Primes' rifles collided with a blast from Megatron's fusion cannon, knocking all of the combatants down. Cloud Optimus Prime ensured that the girl was safe before before his attention was drawn to the horizon by a familiar voice. It was "Cloud Megatron," who had also survived his inter-dimensional trip, and had come to continue his fight against his nemesis. Leap


This Japanese series, told through radio plays using the Transformers: Alternators Optimus Prime toy mold, branches off from the original animated series. It is set in a different universe than both the original G1 and Binaltech continuities. Set in the year 2006, one year after Prime's death in The Transformers: The Movie and four years before the third season, it sees Prime's corpse covertly transported to Japan by the Earth Defense Command, a government organization. The convoy transporting his body was attacked by a group of female commandos, led by Marissa Faireborn, who had known Prime years ago as a child. Believing they had secured Prime's body, the commandos were taken by surprise by EDC "Kiss Player" operative Ringo and her Autrooper mechanoid partner, who killed them all except Marissa. Marissa went to Prime's body just as an Autrooper began to fuse with it and, reflecting on her childhood memories of Prime, she gave his faceplate a final kiss. This initiated a transformation where Marissa and Prime were fused together and Prime was reborn with a new body, capable of transforming into a Dodge Ram SRT-10.
A extensive retool of Lockdown, transforming into a Lamborghini Centenario. An exclusive to Walmart stores and part of the "Autobots Unite" subline, While almost the entire figure has been remolded, the lower legs and feet remain unchanged. The figure is overall a bit taller in stature than the base mold and includes extra steps in the transformation which further differentiate the two. Uncommon for deluxe class toys, the figure does not include any weapons or accessories.
Leaving his home universe, the Optimus Prime of Primax 895.0 Gamma was gathered in Axiom Nexus by its Optimus Prime, along with a roster of other Optimus Primes and their kin in a group known as the Convoy, in which he was redubbed "Hero Prime". Optimus Prime bio in Club magazine #49 A multiversal cataclysm in a universe seeded with Rarified Energon and an invasion by natives from the negative polarity universe had called them into action. Since Matrix bearers were usually never allowed into Axiom Nexus, this was a grave threat indeed! Invasion Prologue
Optimus Prime appears in the Transformers live-action film series as the leader of the Autobots and one of the main protagonists. In the first three films, he is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he gains a first generation-style trailer form before changing into a 2014 Western Star 5700 Concept.[29] Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.
Outside the United States, this set was available in a thinner rectangular box. It contained all the original accessories from the American release, but not the DVD. An English-only version of this packaging format was available in Asia and Australia (initially only available at Myer stores, but later also at Toys"R"Us, Kmart and Target, eventually at drastically reduced prices), while a bilingual English/French packaging variant was available in Canada, still including—though not advertised on the packaging—the (English only) comic book.

The main Prime line in Japan, while mostly using the same molds, was quite a bit different from the Hasbro version. Hoping to snag a slightly-older market, the toys were given a bit of "model kit" vibe. Paint operations were reduced and replaced with old-fashioned sticker sheets, so you had to customize/complete the toy itself... and then there was the blatantly model-kit Arms Microns packed in with every toy.
French die-cast model producers Majorette teamed with Kabaya to produce the Transformers Mini Car Collection, a line of Armada-themed die-cast vehicles, all of which were redecos of pre-existing Majorette toys. Prime was a redeco of Majorette toy #256—a long-nosed tow truck—in his traditional red and blue, now bearing the Autobot insignia, the Micron Legend logo, and an image of the Autobot leader on its hood. The toy came with a pack of gum.

Following our last article on in hand images of Studio Series 38 Voyager Class Optimus Prime (from the Bumblebee film), TonTon Reviews (who put up the in hand images), has come through on what they said and posted their review! This review allows us to get the best look at the toy yet, as well as its surprisingly complex transformation. We see the ion blaster included stores between his legs in truck mode to fill in the gap and hold it togethyer. The backpack in robot mode also has 5mm - Read More
A standard brick with two rows of four studs delivers a profit to LEGO that is orders of magnitude greater than any specialized element, all because the brick is what LEGO calls a “universal” or “evergreen” element that can be used in so many different sets. A one-of-a-kind, specialized piece, however, generally works in just one or a few sets. Moreover, the cost of molding a standard brick is orders of magnitude cheaper than producing a specialized piece.
My 6 year old son has recently gotten into the classic transformers. He has asked for an original Optimus Prime for Christmas. I can’t bring myself to spend the money on an original 1984 model, but would like to know if the reissues from China (sample in the link) are quality products. I’m not looking for a masterpiece, but i don’t want something that will fall apart within a month or so. Thanks in advance for the helpOptimus Prime
Starscream was my first transformer. I got it because my parents bribed me to climb to the top of the pole in the gym class. Shit was scary. Do they even make kids do that anymore? Anyway, I protected that with my life. Sorry to hear about yours. I didn't have siblings at the time but within a few years I did have some who pretty much did destroy everything they touched. Luckily by then I was a teenager and figured out good hiding places for important stuff.
Alternators Optimus Prime transforms into an accurate 1:24 scale Dodge Ram SRT-10. The vehicle mode features rubber tires, functional steering, opening hood, tail gate and doors with a detailed cabin interior. Several of the details of his robot mode body are based on the sculpt of the 20th Anniversary Optimus Prime figure, but the head itself shares more similarities with the Powermaster mold. He is armed with a small pistol which transforms into his vehicle mode engine.
Categories: 3H Enterprises charactersAction MastersAutobotsConvoys (Transformers)Devil's Due charactersTransformers automobilesFictional characters introduced in 1984Fictional commandersFictional refugeesScience fiction film charactersFun Publications charactersGo-BotsTriple ChangersMaximals (Transformers)PowermastersPrimes (Transformers)Robot superheroesSpy ChangersTransformers AlternatorsTransformers characters in video gamesTransformers: Energon charactersTransformers: Prime characters
When Jazz brought Steve Guymo to the Autobot base, Optimus and the other Autobots realized that the Decepticons were behind the abduction of humans from airports across the nation. They were able to find the captive humans, whom the Decepticons were intending to ransom to the US government, and free them before engaging Starscream and his squad in battle. With the Decepticons defeated, the Autobots returned to base where Optimus thanked Steve for his help. Sun Raid (Listen 'n Play)
Billed on his packaging as "BIGGEST Optimus Prime Toy!", Ultimate Optimus Prime consists of an articulated tractor-trailer. The cab can transform into a "normal" Optimus Prime on its own, roughly equivalent to a Voyager in size and complexity, though with a lower degree of screen-accuracy than most large Optimus toys. Prime has 5mm fist holes, as well as additional 5mm ports on his front wheel wells and both sets of external fuel tanks. Four of these remain available in robot mode. The trailer has twelve more 5mm ports. Despite this, the toy comes with no weapons scaled such that the cab-only robot can usefully wield them.

As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".
He comes with a MechTech rifle converts into a large battle axe, and can be locked in by pulling the lever all the way in and tilting it into a gap to the left. The rifle has a separate flip-out handle, while the axe uses the rifle's long barrel as the handle, meaning that Optimus can grip the axe with both of his hands. This weapon was also retooled in a running change, adding a stop to the handle instead of relying solely on the gear system to prevent the locking assembly from flying off into parts unknown.

The character of Optimus Prime first appears in the 2007 Transformers film as the leader of the Autobots in the search for the Allspark. He intends to destroy it, even if it means sacrificing himself, before the Decepticons can use it to create a new army to conquer the universe. After arriving and scanning a Peterbilt truck, Optimus greets Sam Witwicky and Mikaela Banes, introducing his men and explaining why they have come to Earth. During the final battle, Optimus slays the hate-filled Decepticon Bonecrusher and faces his ancient enemy, Megatron. Unable to match Megatron in combat, Optimus urges Sam to push the Allspark into his chest, which will destroy them both. Instead, Sam rams the Allspark into Megatron's chest, destroying it and killing the Decepticon leader. The film ends with Optimus sending out a deep-space signal, inviting other Autobots to join them on Earth.
Like all Predacons Rising releases, the Optimus Prime/Predaking two-pack was exclusive to Target stores in the United States and Canada and to Tesco stores in the UK, and is also supposed to be exclusive to Carrefour elsewhere in Europe (presumably in France and/or Spain, though there have been no sightings as of yet). It has also been found at Rossmann drug stores in Germany and Ripley stores in Chile and popped up at BigW stores in Australia much later, in mid-2014. Also, like all Predacons Rising multi-pack redecos of Beast Hunters Cyberverse figures, the Cyberverse logo is nowhere to be found on the packaging.
the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.
In 2017, the Jazz action figure from the "Power of the Primes" line featured printed in Cybertronian alphabet "MAGA", an acronym for the phrase "Make America Great Again" most notably associated with Donald Trump and Alt-right. A spokesperson for Hasbro responded to io9 about the issue and stated that it was inserted onto the figure by one of their vendors and would address it with them.[4]
He resembles previous Optimus characters in robot mode: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
A special edition Bearbrick released in celebration of the Transformers 30th anniversary, Optimus Prime is a redeco of Bearbrick G1 Optimus Prime in a deco based on his Age of Extinction appearance. He transforms from a Bearbrick painted up like himself to a bear-eared robot and comes with no accessories, but holes in his robot mode hands can accommodate other toys' weapons.
Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He is love.
This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.
Surely one of the strangest examples of licensed Transformers products, Sports Label Convoy transforms into a shoe. Something of a shellformer, this baffling incarnation of Prime is colored primarily white and red in his alt mode of a realistic-looking (if notably undersized) Nike Free 7.0 sneaker, complete with gratuitously long real fabric shoelaces. In robot mode, he is made instantly recognizable by his incorporation of some additional blue and silver in predictable areas, and a traditionally Prime-styled head. Less traditionally, and somewhat perversely, Prime's feet are sculpted in the likeness of his own sneaker mode, making it seem like he's wearing himself!

Optimus Prime's body was hauled out of the Arctic Ocean by the US military. While a terrorist organization run by the enigmatic Lazarus was able to seize control of several of the other Transformers that fell back to Earth, the military worked unsuccessfully to reactivate Prime. They eventually called in Spike Witwicky. Prime Directive #1 Spike was forced by the project chief, General Robert Hallo, to use his piece of the Matrix to reactivate Prime. Functional again, Prime used the Matrix to reactivate more of his fallen comrades. Prime Directive #2
For Transformers: Age of Extinction, Optimus Prime initially transforms into a rusty 1973 Marmon semi cab-over truck and later on a new alternate mode in a blue and red Western Star 5700 Custom semi-truck.[31][32] After humanity turns on all Transformers, regardless of faction, Optimus and the other Autobots go into hiding. Eventually, they find themselves being hunted by a rogue organization called Cemetery Wind. Optimus is severely injured in a trap set by the group, while many of the other Autobots, including Ratchet and Leadfoot, are slain. An inventor, Cade Yeager, comes to Prime's aid and helps restore his health. After uniting with a small band of Autobots, Optimus faces Lockdown, a ruthless bounty hunter allied with the humans, and KSI, an organization that produces man-made Transformers. Optimus is captured by Lockdown, but the Autobots rescue him. Optimus is quickly losing faith in humanity, but at the urging of Cade, chooses to stay and fight a resurrected Megatron and his new army. Prime awakens the ancient Dinobots, and rides a newly tamed Grimlock into battle through Hong Kong. He kills Lockdown and Harold Attinger at the film's climax as revenge for killing many of his friends, including Ratchet and Leadfoot. At the end of the film, he leaves Earth and flies off into deep space, seeking to find out the truth about his mysterious Creators.[33][34]
This playset is a variation of Optimus Prime's dinosaur mode, but as a figure-8 racetrack. A launcher can propel Flip Racers through the track where they can activate a popup Chase and land in a jail. The Flip Racer MorBot is included but any Flip Racer is compatible. The raceway can be extended by attaching the Flip Racers launchers: Bumblebee’s Quick Launch Garage or Airport Blastoff Blades (sold separately).

Besides finding Megatron for the Transformers Movieverse, Mr. Sheppard was known for his many appearances across the Star Trek series and films. Additionally, he was well-known for his work as Blank Reg in the Babylon 5 series, and many other appearances in series like Dr. Who and more over his long-time career. You can read the full article about him via TV Guide.com.
Optimus Prime was subject to several molding and color variations in his early days. The earliest release of the figure featured larger fists, a gun with a thick, round barrel, a slightly-differently shaped gas pump, grey rockets, a grey Roller, a grey launcher in his Combat Deck, and metal plates in the floor of the Combat Deck (a holdover from the Diaclone version of the toy, to which the magnetic feet of the pilots could cling). In short order, his fists were slimmed down, the gun's barrel was pared down to a more slender form, the gas pump's shape was altered, the rockets and launcher were recast in black plastic, the metal plates were removed from the Combat Deck, and Roller's color was changed to a light blue. Along with Roller's color change, however, the Combat Deck's drone pod also became light blue, and a third running change soon followed that saw it restored to its original darker blue, and Roller changed along with it. These modified components would become the default accessories used by subsequent reissues of the Prime toy would take, though Roller stills fluctuates back and forth between grey and dark blue, depending on how show-accurate each reissue wants to be.
×