In shock over the news, Optimus could do little more than scream in agony as Megatron and Starscream made their escape. After regaining his senses, the Autobot leader resumed contact with Ratchet, relaying the order that all Autobots were to return to base. There, Optimus tried his best to calm his panicking subordinates. Though he assured them that power reserves would allow their civilization to continue functioning for some time, they remained jittery. Optimus then declared that he would spearhead a counter-invasion of the Underground. Still, the Autobots remained uncertain, with Brawn pointing out that the Underground was not only vast and dangerous, but mostly unmapped as well. Taking full responsibility for SARA's abduction onto himself, Optimus suggested that he venture to the Underground alone and track SARA's energy signature. Hot Rodimus, however, was unwilling to allow his leader to take such a dangerous course of action, and volunteered to join him. The rest of the Autobots, finding their courage at last, followed suit. Moved by their devotion, Optimus accepted. He also thanked Hot Rodimus for calling out his foolishness, as Optimus now recognized that he would have made an even greater mistake by diving headlong into a doomed venture. Brawn approached Optimus next, insisting he join the group. Optimus at first refused, as Brawn had gotten badly injured during the invasion, but was convinced by the minibot's resolve. Once they were ready, Optimus issued the order to his Autobots... ROLL OUT! Resolve
This golden chromed redeco of the Super class Optimus Prime figure was initially offered as a prize to five lucky winners of a colouring contest held in the pages of the TV Magazine. Additional units were later given away via in-store draws at Toys"R"Us Japan; precisely how many is unknown, but the regularity with which the toy appeared on auction sites throughout 2005 suggests it was quite a few.
As the number of sets released has increased, the harder it has been for stores to parcel out their shelving space. In order to make more sales, decisions have to be made as to which sets will be carried. Not every store can carry the whole product line (not even all official LEGO stores carry the whole product line). This process will favor the sets that drive sales the most, such as the licensed sets. The traditional boxes of bricks are pushed out of the way for the more profitable lines.

Knight Armor Turbo Changer Optimus Prime is a Voyager-sized figure that transforms from truck to robot in just 2-steps: pulling his whole truck kibble to the front then fold down to complete the robot mode, although converting him back requires some few steps. His only articulation is the elbows, and he features 5mm compatible hands. He also features a "Knight Armor" gimmick, which consists of his mask popping out to his head with the press of the button on his chest. Take note that you need to flip back the mask manually before you turn him back into Truck Mode.
But in between those two most well-known alternate modes, Bumblebee has had at least six others. For the Transformers: Alternity Japanese toy line, he was a yellow Suzuki Swift Sport, which at least is still a small, quirky car. Ditto the AMC Pacer, the form he took when he travelled back in time to the ‘70s in a G.I. Joe vs. The Transformers crossover comic. Somewhat similarly, he’s a Supermini police car in the Transformers Animated series. But then he’s also been a couple of other muscle cars: as the Timelines Deluxe Goldbug toy, he’s a Chrysler ME 412 concept car, and in the Transformers: Prime animated series he can take the form of the fictional Urbana 500 muscle car. Bumblebee also has a number of different Cybertronian vehicle modes.
A late-run extensive redeco of the Super Base Armada Optimus Prime toy, "Powerlinx" Optimus Prime sports the darker color scheme the character takes on in the Armada cartoon episode "Origin" following a Mini-Con power-up, but he is not precisely show-accurate—the deco would later be fine-tuned with more accurate details for release in Japan as the Magna Convoy DX giftset (see below). In addition to now sporting fully-mobile Super Mode arms without the movement-impeding tabs, Prime still comes with all his features and accessories, though for this release, his Mini-Con partner Sparkplug got retooled with a new rear chassis and a blinged-out golden chrome body as "Corona Sparkplug".

The San Diego Comic-Con 2017 exclusive Optimus Prime figure is another redeco of the Premier Edition figure, which aims for a more movie accurate look than the original by still sharing the same paint masks, but replacing the chest's deco with flames and adding extra paint applications on the legs, arms, chest, head, tire rims, both sides of the engine compartment, and the sword and shield... but for some reason still sports the movie-inaccurate blue 'collar', as well as the smaller, less accurate vehicle flame tampographs instead of the more movie-accurate ones used on Dark Optimus Prime. His Autobot insignia is also moved on the upper back section of the air dam. He is packaged in a stylish, display-case-like-box similar to later Transformers: Alternators releases and the Hasbro Toy Shop/SDCC 2011 exclusive figure.
Towering at only barely over two inches, this was actually not just the smallest movie-verse Optimus but even the smallest transformable figure of Optimus Prime for a while - ironically enough, being even slightly tinier than the Smallest Transforming Transformers Optimus Prime - that is, until he was later "out-tinied" by two other cute super deformed versions.
Optimus had Bumblebee and Huffer plant false information to mislead the Decepticons. As the Autobots were in need of a new power source, he sent Cliffjumper to find Doctor Heath Blaisedale and had to apologize to the doctor after Cliffjumper kidnapped her. Persuading her to help them, the Autobots traveled to the solar plant to make use of her solar reactor, only to find the Decepticons were already planning to attack it. While the other Autobots re-energized, Optimus protected them from an attack by Starscream, Thundercracker and Skywarp. Ravage abducted Blaisedale as a diversion, forcing Optimus to lead a team and rescue her. When the team returned, the plant was already under attack and Optimus helped the Dinobots drive them off. Unfortunately the Dinobots totaled the plant in the process, and Optimus promised Blaisedale the Autobots would help her rebuild. In return, Blaisedale organized a meeting with the President of the United States so the Autobots could forge an alliance. Sun Raid (Listen 'n Fun)
In 1986 the Transformers animated movie had been released, and during the run of the movie, through a pamphlet that came with certain figures, you could order certain Transformers through the mail, such as Optimus Prime among other toys. The toys came in a standard brown mailer box, with items, booklet, and a limited Edition Movie certificate and sticker.
A Supreme sized version of Optimus Prime, based on the Voyager class figure design.[153] When pushed forward, the upper torso spins and transforms, with the transformation sound indicating the completion of the process. The right arm has an axe-swinging action while the left arm has a punching action. Includes show-accurate battle axe that features retractable blades and a spinning jet flame. Also features sound effects and pre-recorded dialogue ("My name is Optimus Prime!", "Let's go!" and "Bring it on!"), as voiced by David Kaye.
Part of the third wave of 2012-onwards Generations Legends Class toys, Thrilling 30 Optimus Prime is a new mold that is roughly the same size as a Cyberverse Commander Class toy. Both his truck and robot mode are based on his Don Figueroa-designed body from IDW's ongoing series, and features 5mm-compatible hands and roof. He comes with an Ion Blaster which has both 5mm and 3mm posts.
A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.

His trailer opens up into his Combat Deck, which features a missile-armed repair drone pod (with seating for one) mounted upon a boom lift arm. Situated in the base of this boom is a spring-loaded launcher that can be used to launch Roller out of the Combat Deck. Roller himself has seating for 4 passengers, and can be equipped to carry Optimus Prime's rifle or a fuel pump. The interior space of the trailer allows storage room for one Autobot car.
This version of Ultimate Class Beast Hunter Optimus Prime is exclusive to Cybertron Con 2013. While Prime itself is unchanged, he has been packaged in the box with his backpack plugged into his back, allowing the cannons to rotate when his spiky stomach-fenders are pushed down. The box itself also has slightly different text and graphical layouts, is encased in a large, slip-on outer covering, and features a designated number as part of the Thrilling 30 line.
Realizing that the planet is dying, Optimus orders a mass evacuation of all Autobot cities, but many transport ships are destroyed by the Decepticon satellite Trypticon, under orders from Megatron that no one shall leave the planet. He orders the Aerialbots Jetfire, Silverbolt and Air Raid to fly and destroy Trypticon. The aerial trio manages to destroy Trypticon's jet pack and send the Decepticon behemoth crashing into Cybertron, where Optimus Prime and the Autobots band together to narrowly defeat him, sending him plunging into a pool of raw energon. Optimus and the remaining Autobots volunteer to stay and defend Cybertron from Megatron for as long as possible while the rest evacuate the planet. He commissions a massive vessel known as "the Ark" to transport the remaining Autobots into space when the time comes.
I understand what you’re saying. You want it to be like the Cybertron games of making them look less earth but still have the colors and molds of G1. Because I never knew that G1 actually had their vehicles molds in their Cybertron Alt Molds. I thought that was so stupid having earth vehicles parts on Cybertron. But they had to make the G1 fans and Bay fans happy so they took the cartoon and modernize it with some bayism look. I think they did good but I can see some parts being better.
Due to the interference of Ravage, the same as the one who appears in the Beast Wars, most of the events of the original animated feature do not transpire. The most influential of these events is the Battle of Autobot City. Because this battle did not occur, Optimus Prime and Megatron do not have their final showdown. This means that, for this continuity, Optimus Prime does not die and Megatron is never reformatted into Galvatron. As a result, Optimus Prime is able to lead the Autobots during the Binaltech saga.

Armor Knight Optimus Prime is a retool of Age of Extinction: Generations Leader Class Optimus Prime. It features a new head sculpt with a rotatable faceplate (one side with the mask, the other without, the whole part rotates), along with other remolded body parts (such as his skirt, feet, and chest), giving it a more screen accurate appearance. He includes more movie-accurate weapons, featuring a new sword and shield, albeit in not-so-accurate colors (the sword's transparent orange blade was also a nod to the sword's "heat up" mode in the concept art.). He is covered in metallic paint, along with additional chrome details on his rims and bumper.


Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.
Near the end of the series, in what is generally regarded by fans to be his most impressive feat, Optimus Prime takes on Galvatron without combining with any other transformer. Traditionally, throughout the three series and RiD, Optimus Prime has been shown to be physically weaker than Galvatron. At the end of the intense fight, Galvatron proved stronger than Prime, but Prime managed to destroy Galvatron with Vector Prime's sword.

Shortly after reaching the other shore and taking out Skywarp, Prime witnessed the gigantic Bruticus bust out of the Terrordrome and attack everything around him. With Superion gone, Prime knew that there was only one way to stop this rampaging monster, and ordered his Autobots to evacuate the humans while he went looking for the Matrix of Leadership. He soon found that Snake-Eyes was in possession of the artifact, but was under attack from Megatron. Prime attacked Megatron, keeping him at bay while telling Snake-Eyes that destroying the Matrix would kill Bruticus. The ninja complied, only to learn that Optimus had left something out of the story: smashing the Matrix would kill all the Transformers, including Prime himself. Looking at the Autobot leader's body, the Joes knew that Prime had been aware of this, and had deemed it a necessary sacrifice to save the humans. The Iron Fist


Released as part of the first wave of the Energon Igniters Nitro Series, this Optimus Prime is a new Voyager-sized mold that converts from a robot based on his Age of Extinction body into a truck in 11 steps, and he features 5mm-compatible hands & articulation on his head, arms, and only his upper legs. He also features built-in Ion Cannons in this lower leg panels, activated in vehicle mode. He also comes with his own energon core, which is a different mold from his Power Plus toy.
A Voyager class figure that transforms from semi-trailer truck to robot. Head features retractable face plate. The figure's main gimmick is a spring-loaded mechanism that spins the lower torso during transformation to robot mode. Trailer detaches and transforms into a giant Ion Axe or jet pack. Prime's gun can be filled with a small amount of water. Some variants of the figure come with the Autobot symbol printed on his left shoulder while others do not.
Part of the first wave of Beast Hunters Series 3 Voyager Class toys, Optimus Prime is functionally an upsized copy of his Beast Hunters Series 3 Cyberverse toy, though with certain sculpted details based on his larger toys, the replacement of his ball joints with more robust ratchet joints, the addition of thigh swivels, and various deco differences. As a result, his complexity is lower than in his previous Voyager Class toys, but he ends up being much, much more massive.
Optimus was eventually revived by the Autobots when they arrived to liberate Master from Decepticon hands. They found allies in the native Cyberdroids—those Optimus loyalists who had fought the Malignus insurgency. Autobots and Cyberdroids liberated the deposed triumvirate of Apex, Hi-Q, and Diac. Hoping to check the power-mad Galvatron and his three Cyberdroid allies, the Autobot leader was revived and binary-bonded himself to three Cyberdroids, including Surge, and Apex, who formed his head. Thus empowered, "Triple-Threat Prime" battled Galvatron and his forces across Master in a series of epic conflicts. The Autobots were unsuccessful and were forced to retreat. A Brush With Infamy–Prologue
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.
×