Hot Rod was then summoned to Earth by Optimus Prime, as revealed in The Transformers: Escalation. With typical bravado Hot Rod and Hardhead insisted on heading to assist Prime's unit in stopping Megatron. Hot Rod left Hardhead to assist the other Autobots while he captured the Decepticon facsimile. Unfortunately, he almost collided with Prowl, who had had the same idea. Despite some bickering between the two, they were able to eventually capture the facsimile, forcing the Russian troops to back down. When Hot Rod heard the battle between the Ore-13 powered Megatron and the rest of Prime's troops, Prowl forbade him from interfering, entrusting him with the safe return of the facsimile. Calling Nightbeat for transport out, he was jumped and severely damaged by Skywarp and Thundercracker. Nightbeat teleported him away, but Hot Rod had been badly damaged, and the facsimile reportedly killed.
This small version of Energon Optimus Prime was released by Kabaya as part of their DX Transformers line of candy toys. Prime transforms in the same manner as the larger Energon figures do, though his arms have to be removed at the shoulder and reinserted into his back to form truck mode. The Prime Force were sold in a separate set in the DX Transformers series, and can combine with Prime to form his Super Mode. Optimus came with a stick of gum.
A larger version of Prime, with Advanced Automorph technology and a more complex transformation procedure. Has two sets of electronic sounds and lights that activate when the head pops up or when you press a button on the roof (in truck mode), and a single projectile weapon that can swing over the toy's right hand. Unlike Megatron (whose head is fixed) and Brawl (whose head is connected with a ball joint), Prime's head is limited to side movement due to the circuitry on his LED eyes. This figure has a folding cannon and a firing missile.[76] With this figure standing nine inches tall and Optimus being 28 feet (336 inches) tall, the toy is about 1/37 scale.

During the promotion of the Transformers films, Optimus Prime appeared in several commercials. Optimus Prime, along with other transformers, were featured in several commercials for General Motors. Scenes with Optimus Prime were used in several General Motors commercials.[68] A commercial for the Discovery Channel featured Optimus Prime singing part of a promotional song.[69]


Great read. I have noticed an absolute drop in quality myself. My sets in my youth range from 83 to 90. My sons are from 2011 and there is a clear distinction. Aside from the weight of identical bricks being different, the older bricks stay together in a much more durable way than the new bricks. To test this, I created the same models using all old bricks and all new bricks and the difference was marked. I understand doing certain things to reduce costs, but not at the expense of quality…

While I don’t think anyone should complain about the price of Lego, I have to say that I don’t think our nostalgia for the 80s/90s is at all misplaced -it really was a better time to be a yuppy/young parent. There were more and better jobs available with better pay, benefits, and less required prerequisites. Young adults today have to work a lot harder to maintain the same lifestyle our parents had..of course there are exceptions, if you are especially gifted you can still make it in today’s world.
The "robot mode" of Optimus Prime is where the pullback motor and working wheels of the toys lie. Optimus is sculpted in blue plastic, pre-posed in an odd crouching pose with zero points of articulation. His right knee is bent back, with his right arm touching his knee, while the left side has the leg forward and the left hand holding onto his butt. The toy is as sparsely painted as the truck, with light blue eyes and chest windows, gray hands and feet among other parts, and red forearms. Two panels on his back have red flame tongues on them.

Optimus Prime is composed of two parts, his truck cab and his trailer. His new truck cab is reminiscent of the original Optimus Prime truck cab, but is constructed entirely of plastic, lacks vacuum-metalized plastic and has no clear windows. It also transforms differently in that the front of the truck is no longer the robot mode's chest. His chest is now formed out of the truck's cabin rear, styled after his cartoon appearance. He is armed with two long black rifles, based in part upon his cartoon rifle.
Apart from this, Optimus Prime is also the weakest link of the gestalt combination, due to a number of design failures attributed to his torso mode. The square holes-and-tabs used to secure the arms together when in torso mode are too weak to remain locked in place (though a very small amount of copies can secure the arm well), and are prone to falling out of position should an attached arm be moved. The torso mode's skirt plate is also attached to the stomach rather than the pelvis, rendering the waist swivel nearly worthless due to the skirt obstructing articulation.
The Autobots subsequently returned to Cybertron aboard a refueled and repaired Ark with the defeated Decepticons, taking the Decepticons on Cybertron unawares and quickly capturing control Cybertron. Peace reigned for a time until a series of natural disasters began, the source of which was determined to be the planet Moebius in a parallel universe. The Autobots assembled a team to travel to this alternate universe and stop the threat; Optimus Prime personally led the team, unwilling to put anyone in more danger than himself. Wheeljack, Hoist, Jazz, Prowl, and Silverstreak constituted the rest of the team; they dubbed themselves Spy Changers because they aimed to achieve their goal with stealth and diplomacy. The team modified their bodies to match the native cyborgs using data acquired from the Sky Spy and traveled to the 22nd Strata but were soon attacked by the local Guardians, who mistakenly presumed them to be Renegades. The Spy Changers were then rescued by the real Renegades, who presumed them to be potential allies and took them back to their flagship, the Rogue Star. Renegade leader Cy-Kill attempted to court the Spy Changers as allies, but Optimus saw through Cy-Kill's deception. Eventually, the Autobots formed a secret alliance with the Guardians as well as discovered the cause of Cybertron's troubles: Renegade bases on Moebius were draining the planet's energy. The planet's geometry had turned it into a crude Dimensional Interfacer, and Moebius was tapping into Cybertron to sustain itself. Hoist was able to end the crisis by triggering the bases' remote detonation sequence. Cy-Kill was furious, but in the ensuing battle, the Autobot-Guardian alliance triumphed over the Renegades. Optimus Prime and Leader-1 shook hands as a symbol of the transdimensional friendship, and the Autobots returned to their home reality, secure in the knowledge that they had allies in places as distant as alternate realities. Ask Vector Prime, 2015/09/30
Kiss Players Convoy is a redeco of Alternators Optimus Prime. Unlike the Alternators version's bare red plastic, he is covered in a deeper red paint. Some of his body parts are cast in different colours, such as his shins, and has a much more intricate paint deco based upon Masterpiece Convoy. He is armed with his small engine pistol and a pink surfboard that can be reconfigured into either two small blades or a large double-bladed sword.
One of the Mini-Con limb-bots (Soundwave helmet) is based on the original movie version of Optimus. The main torso-bot is based on Generation 1 Optimus's original body. Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). And the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
Both Optimus Prime and Bumblebee raced down a street in an unknown desert while having an argument about Energon. He ordered Bumblebee to scan the surroundings to find the location where the Decepticons were hiding, and to be careful for possible scouts. When Bumblebee noted what the Decepticons were doing, Prime speculated that they might be planning to convert the energy into Energon, and ordered Bumblebee to create a diversion. While Bumblebee and Cyclonus fought, Prime made a surprise attack and took out Cyclonus with his Ion-axe, before turning his attention to Megatron. When both Decepticons fled, Prime told Bumblebee they'd done a good job (in front of a burning Gas station), and both Autobots got back on the move. Fight for Energon
Hot Rod identified the Decepticons on board through the damaged hull and immediately attacked the targets within using low powered, rapid fire bursts. When the Decepticons returned fire, Hot Rod changed tactics and began firing more concentrated blasts at the shuttle itself. Eventually, he managed to disable the shuttle. With their cover blown, Megatron ordered his forces to attack and the Decepticons began pouring out, beginning their planned assault on Autobot City. Before focusing his attention on the onslaught, an incensed Megatron destroyed the observation platform on which Hot Rod and Daniel were standing. True to his protective Autobot instincts, the first concern of Hot Rod was for the safety of Daniel. Quickly shielding the young boy, the two survived the platform collapse but were soon cornered by Blitzwing and Shrapnel. Timely intervention by the old and experienced Autobot Kup diverted the cannon fire from Blitzwing and allowed the three of them to escape.
He reappeared in the third crossover, where he apparently acted as Optimus Prime's right-hand man. Putting a team together to look for the missing team that had journeyed to Earth (who had been captured by Serpentor and the Decepticons), he would later lead the combined G.I. Joe/Autobot force that rescued Optimus Prime. In contrast to his usual "youthful rookie" portrayal here Hot Rod seems to be in a high command position, outranking Ultra Magnus, Prowl and Ironhide among others. However, by the fourth crossover Hot Rod is forced to wait on Cybertron under Magnus's command as Optimus Prime journeys to Earth.
Golden Lagoon Convoy is a gold and gold chrome redeco of MP-10 in homage of the original cartoon episode of the same name. He retains his energon axe, ion blaster, and Matrix of Leadership. Part of TakaraTomy's 35th anniversary celebration, he was initially released at Summer Wonder Festival 2018, then later through Cybertron Satellite stores across Japan and TakaraTomy Mall.
Compared to the Combiner Wars release of the mold, Convoy features additional paint operations on the thighs, truck bumpers, the details on the inner legs, the gestalt chest halves (which are now painted over due to being molded in grey plastic), and the gestalt torso's lower section. The stomach's deco is also minimized, and the silver paint operations on the lower legs are now replaced with gunmetal while the mute metallic blue is now shiny metallic. When it comes to unpaintable plastic; his leg joints and feet are now blue, while the gestalt skirt flap is now the same grey as the arms. In addition, his flip-up gestalt leg panels and thighs are now molded in black, with the latter being painted in silver with some yellow details.
Released as part of the Energon Igniters Power Plus Series subline, this Optimus Prime is a Scout-sized mold that converts from robot to truck based on his appearance in Age of Extinction in just a few steps. His only articulation is the swiveling upper arms & pivoting arm joints, and his fuel tanks also doubles as a flip-out cannons, activated in vehicle mode. As with all Nitro and Power Plus figures, Optimus also comes with an energon core, which allows his vehicle mode to propel forwards.

Virtually every toy in this list has a scannable insignia sticker on it. For Hasbro releases, it temporarily unlocks that toy as a playable character in the Robots in Disguise mobile game, and can only be scanned once per day. TakaraTomy releases simply check that off on their mobile app's collection list. It's honestly quicker and less redundant to say which toys don't have this feature. Meanwhile, scanning the Combiner Force toys' insignia stickers gives the player Tickets, which can be spent by giving them to Cryostase via the main map menu.
A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
The figure has diecast in its feet, shins, and abdomen. It features pinstriped flames, articulated fingers, a headsculpt with a face that can rotate between masked and unmasked modes in a method identical to Armor Knight Optimus Prime's, and an abdomen that opens to reveal a chamber housing a diecast Matrix of Leadership. He comes with said Matrix, his Ion Cannon, and a pair of Energy Swords that tab in behind his wrists (the hands unfortunately have to be bent forward to accommodate these). All three weapons can combine and store on the fifth wheel in vehicle mode.
Rodimus gained the help of the criminal Witwicky family, believing they would help him learn more about Earth. After fighting Goldbug for leadership of the Autobots, he renamed himself Rodimus Prime. His first attack on the humans was to take control of the base controlling a human military satellite and use it to blackmail the humans into making him the leader of the world. The Decepticons were able to break into the base, where Heatwave used his ability to control machines to have the satellite fire on its own controls and then destroy itself.[16]

If they took the left passageway, the group happened upon Megatron’s lab. Though Megatron attempted to trick Optimus into activating the Fortress’s self-destruct sequence, Optimus was too clever to be duped. After deactivating both the Destruction beam and the Decepticons themselves, the Autobots found Jessie tied up in a cell. The Autobots then celebrated their victory by guzzling a few quarts of fine-grade oil.
Stewing in a cell, Optimus blamed himself for their predicament, but he and the Autobots were soon rescued by Broadside and Sandstorm. Sandstorm and Optimus traveled through Cybertron's Old Slave Trails, only to find themselves ambushed by Runabout, who swiftly killed Sandstorm, and then the Decepticon was attacked by a Sharkticon, which lunged at Prime. Cold War Prime recovered to find himself in the care of a group of Autobot rebels including Hot Rod, Blurr and Kup. Though Optimus lashed out at Gnaw upon awakening, the other rebels quickly cleared up the misunderstanding, assuring Prime that the Sharkticon was their ally. They revealed to Optimus that Shockwave had been transmitting subliminal signals to increase Transformer aggression, readying them for war against an unseen foe. At this point, another rebel cell joined up with them with dire news: Shockwave had unleashed the Omega Sentinels on Iacon! Passive Aggression
Having launched a painstaking review of each of those 14,200 pieces in the LEGO universe, the Design Lab found that 90 percent of new elements were developed and used just once. And many components were duplicates. Among the dupes were eight minifig police officers and six minifig chefs, with barely decipherable differences between them. The Lab dealt with the redundancies by slashing the total number of components by more than 50 percent. When it reduced the product portfolio’s minifig chef population from six to one, designers protested and longtime fans howled. To calm the fans, LEGO tried humor: it held a mock online memorial service for the “dead chefs.”
While they wandered through the tunnels, the Joes and Prime found cave paintings that described the last visit to Earth by the planet-eating god Unicron. They were attacked again by Bludgeon and Cobra-La minions, but were led away by a ragged Joe Colton, prisoner of Cobra-La for the last 25 years. Black Horizon, Part 1 of 2 Bludgeon managed to find them again and during a second battle Prime tore open the Pretender's shell, revealing Bludgeon's robot form inside. Bludgeon tripped and dangled dangerously over a chasm, but rather than let Optimus Prime save him, Bludgeon forced Prime to drop him to his death laughing all the way down.

The success of Beast Wars and the change in storyline resulted in its second phase: Beast Machines. Like Beast Wars, the name Transformers was used only as a secondary title. While still a success, the storyline and direction borne by Beast Machines was questioned and criticized by the most ardent fans who knew the previous history of the Transformers. Also, there was a clamor for a return to the original idea of the Transformers, that of their being protean robots with nearly humanlike artificial intelligences who transformed into vehicles or devices.
The actual events of the Autobots and Decepticon coming to Earth were never printed by Dreamwave comics, but flashbacks of the events are printed later. These flashbacks suggest that the Autobots allied with humankind and defeated the Decepticons at the turn of the century. They planned to return to Cybertron aboard the newly constructed Ark II, but the ship was destroyed as part of a military conspiracy to take control of the transformers. A terrorist organization, run by the enigmatic Lazarus, was able to seize control of several of the Transformers that fell back to Earth while the U.S. military was occupied with locating Prime's body. Before his departure, Prime had entrusted a small portion of the Matrix to Spike Witwicky, who was forced by the product chief, General Hallo, to use it to reactivate Prime. Functional again, Prime used the Matrix to reactivate more of his fallen comrades, and then faced off against Megatron in San Francisco.
Part of the first wave of Mini-Con Battle Pack figures, this Optimus Prime figure is a new mold, about the size of a Scout Class figure (In Optimus' case, the size of Cyberverse Commander figure), and scaled with Legion Class figures. Its transformation scheme also takes some cues from the Legion Class figure. Battle Pack Optimus Prime also features a transparent orange battle axe & armor pieces, although the chest armor/flip-up mask piece is needed to be assembled first. The included pieces can be combined into a clawed battle axe, or attached to his body to form his armor (although the flip-up mask can restrict his head articulation). Optimus Prime can totally wield the axe dual-handed. As an undocumented feature, the axe can be stored on his truck mode with the tab featured on Prime's right shoulder.
Like some other Legends/Legion Class toys, several of the loose units were dumped in some Hobby Shop dealers in Asia, although this one is very likely to be an identical knockoff of the toy. While the paint applications are pretty much identical to the real deal, the pegs on the legs/trunk front can be a little too tight when attached. in some worst cases; it can break off if attempted to pull off by force.
His main gimmicks, however, are the two large, blue-and-white mini-guns hidden in his back/hood, which can deploy and "weaponize" either mode. When deployed, the mini-guns swing out from his back/hood and spin, while a red LED inside his torso lights up briefly. The mini-guns swing down to the sides of his head in robot mode, and can also be deployed in vehicle mode when one manually opens the grille. Pushing down on the red lever on the center his torso (in either mode) briefly lights up the LED again and swings the mini-guns back into their hiding places.

But around the mid-’90s, Hasbro let the trademark for a toy named “Bumblebee” lapse. At that point, the Generation 1 Transformers were almost passé, as they focused on the newfangled Beast Wars and Beast Machines lines. In fact the Unicron Trilogy continuity (mid-2000s) character called Hot Shot was originally going to be called Bumblebee, and in fact had a lot of Bee’s personality traits and yellow color, until they realized they couldn’t use the name. Fortunately, they got it back soon after.
the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.
On the battlefield, there are few who rival Optimus Prime's prowess. He is easily the strongest of any Autobot his size, and his ion blaster and energon-axe are deadly weapons. He would sacrifice his life to protect his fellow Autobots or those under their care and does so on a regular basis. His compassion for other sentient beings is his only real weakness, and one the Decepticons have taken advantage of time and again... though it's also the source of his strength!
An undocumented transformation step includes flipping Optimus Prime's knees out in vehicle mode to form a back bumper with tail lights. Oddly, the toy itself and the package art show Optimus Prime with four fingers on each hand, while he has 5 fingers in the video game. The vehicle mode pictured here is minimally mis-transformed: The exhaust pipes have not been rotated to hide the indentations against the vehicle body. The instructions show the rifle being plugged in by its shorter peg, but the packaging depicts the rifle stored by its grip, which keeps the weapon higher off Prime's body, but is also more secure.
General Optimus Prime later attended a meeting of the Convoy held by Starscream. There, he assured the others present that he had been mistaken about the rumored Megatron's identity. Starscream was convinced, but the rest of the Convoy were savvy to the truth. The other Optimuses supported General Optimus Prime's decision, stating that if C-81 had earned the General's trust, that was good enough for the rest of them. Optimus was later seen hanging out with Spy-Eye on his off-time. Cybertron's Most Wanted
Tomica Optimus Prime is a die-cast non-transforming toy of his truck mode from Prime. It was sold as part of the "Dream Tomica Series", a subline featuring exclusively fictional vehicles. Like all Tomica toys & all Generation 2 GoBots and Spychangers, Optimus Prime features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces. However, they do not convert into robot mode.
Optimus Prime was given the Matrix by Primus himself, and used to be friends with Megatron. Prowl is his closest friend and Ratchet is his oldest. Searching for Energon, the Autobots landed on Earth, but were followed by the Decepticons. With the help of their human allies, they bested their foes, and knowing they would return, decided to stay and wait to defend the planet once more. Optimus Prime was proud to be an Autobot. I Am Optimus Prime 

What I find more interesting is who’s in this wave. Not only is there Hot Rod and Barricade in ’80s muscle car form, but Optimus Prime in his red G1 Peterbilt truck form (just with movie Optimus’ head! Maybe Bumblebee will explain the origin of his “rip off everyone’s face” fetish). Two versions of Bumblebee round out the wave, his traditional movie-verse Camaro and G1 VW Bug.
Released as part of the Single Pack assortment, Optimus Prime is a show-accurate, non-transforming die-cast vehicle based on his alternate mode. He features through-axle construction, allowing for super-speedy racing on smooth surfaces, and his car mode is compatible with many tracks and playsets from Hot Wheels and Matchbox. He features 4 wheels, as opposed to the Legion Class' 6 wheels & his larger toy's 10 wheels. Optimus Prime also comes with a collector's flyer.
Since the dawn of the Transformers in 1984, the spunky little Autobot called Bumblebee has been a fan favorite. Why? He was the underdog. He was small, and he was one of the weaker Transformers, but his heart was huge and he showed great bravery on the battlefield. As a result, he was an admired and gentle friend not only to humans, but to his peers as well. And it didn’t hurt that his alternate mode was a cute little yellow Volkswagen Beetle.
Optimus Prime has fictionally shown a dislike of certain kinds of music and dance. For the Marvel Comics continuity, the letters page for issue 324 mentions he hates the music of Mötley Crüe. In the cartoon continuity, "Blaster Blues" and "Quest for Survival" have Optimus react noticeably more passive-aggressively to Blaster's choice of music than the other Autobots. And in the Dreamwave Generation One continuity, Hardwired features an uncalled for negative remark about Jazz's dance skills.

The Transformers toy-line is typically divided into two main factions: the heroic Autobots and their opponents, the evil Decepticons (traditionally known in Japan as the Cybertrons and Destrons, respectively, although more recent releases often using the English terms). Transformers toys are sold at a number of price points, and various Transformers series utilize unique play features.
Hasbro's original plan for the Beast Wars was to have Optimus Prime, renamed Optimus Primal, and Megatron be reformatted versions of their 1980s selves. This was shown in the toys's Tech Specs, and in the comic packaged with the basic Optimus Primal/Megatron two-pack. Hasbro also wanted the "Mutant Heads" found on all of the deluxe sized first year toys as battle helmets, but Mainframe scrapped the idea as it would have required three animation models for each character instead of two. Another designed feature for the 1995/1996 toys was carried over from Generation 2, transparent "light pipe" eyes. However, most toys had those parts cast in opaque plastic.
A retool of Lockdown with a new head. He is a simplified toy that can auto-transforms from an unlicensed approximation of a Lamborghini Aventador rather than a Lamborghini Centenario LP770-4 into a Voyager-sized robot by pulling out the arms first, and then flip the figure over itself. He features articulation on his arms, and features 5mm compatible hands.
The mold suffers from a minor design oversight, wherein the rear Nissan badge collides with his left leg strut when the left foot is hinged over and pegged into a clear plastic socket during transformation, with the results being that the connection is slightly crooked, isn't very secure, and sometimes pops off, and that the crooked pegging often causes the socket to crack.

The only differences with the unreleased version, aside from the packaging, are that silver paint has been added to the previously unpainted grill/fender area, the blue paint operations have been changed to teal, and the red Autobot insignias have been replaced by purple Decepticon ones. Prime's bio apparently explains that he took on this new color scheme in order to infiltrate the Decepticon ranks, in response to recent attacks by some new Decepticon forces pretending to be Autobots.


Smallest Transforming Transformers Convoy is the smallest fully transforming Optimus Prime toy yet. He features an accurate transformation sequence based on the original full-sized toy, but understandably has no detachable hands, and has little articulation. His sculpt is based upon his cartoon appearances. He comes with a tiny version of his laser rifle.
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.

The real selling point of the toy, however, is the colossal Omega Combat Armor. Optimus' trailer transforms into nearly two feet of limb extensions, armor, and wings. The armor remains completely integrated (except for the Ultimax Super Cannon) during transformation, with no partsforming, although this renders the final power-up robot mode somewhat limited in articulation, having no leg articulation whatsoever aside from swinging the hips out slightly and twisting at the ankles for maximum stability. The armor adds six more 5mm ports of dubious utility around the feet, retains the four from the cab robot and the eight from the trailer (on the backs of the wings), and has his own pair of 5mm fist holes. In trailer mode, it can support itself using folding blue landing gear, although the attached ball-jointed struts make it somewhat less than realistic.
If Optimus ordered his troops to come to the humans’ aid, they found themselves taking part in a struggle in futility, as the entire town was near-weightless, meaning they couldn’t put the humans anywhere where they wouldn’t float away once more. Then, the Autobots heard Decepticons approaching. Helpless in their current position, the Autobots were quickly eradicated by the Decepticons.
G1 Convoy comes with two sets of fists, each pair featuring differently-shaped fist holes: one pair with square holes to hold the figure's "Convoy Gun" (as his ion blaster is called), and the other with round 3mm-compatible holes to hold the spring-loaded translucent blue missile launcher (a generic accessory also available with Robotmasters Beast Megatron and Beast Convoy). The fists are swapped out by simply popping them out of the wrist-hinge that holds them in place; the figure also includes an energon-axe that can be inserted into the wrist instead of a fist.

A fourth version is shown in the 1987-88 Transformers product catalog that has several minor differences from both Powermaster Prime and God Ginrai, such as having God Ginrai's sliding fists but in red, a completely different trailer hitch assembly partially based on the third design, an offset Autobot symbol in base mode, extended feet also based on third design, far more detailed super mode outer leg panels, completely different front bumper, and the first instance of single faux shoulder smokestacks rather than two. It is still unknown as to why Powermaster Prime has completely different arms from God Ginrai or all earlier concept versions.
While Beast Machines was still running in Canada, Japan's Takara made a bid to return to the familiar vehicle-transforming robots concept. In 2000, Car Robots was released. This line was brought by Hasbro to America as the Robots In Disguise series, and featured the Autobots facing off against the Predacons. This series is usually regarded by most as filler while Hasbro contemplated the next direction for Transformers. However most fans of Transformers recognise that most if not all of the toys released from this line were of excellent quality (with the Optimus Prime and Ultra Magnus figures gaining considerable praise), combining the ball-joint articulation with detailed, well painted alternate modes.
The 1984 and 1985 toy lines contained several figures of note. Megatron, the Decepticon leader, originally transformed into a realistic Walther P38 pistol with stock and barrel extensions and scope. The Megatron toy was delayed till 1985 for release in the UK. The Constructicons were the first "gestalt" team in the Transformers line, but were different from most subsequent gestalt teams in that they consisted of six members instead of five. The Autobot Jetfire was repainted from a Macross toy, specifically the VF-1 Valkyrie, and the character was renamed Skyfire in the animated television series program for copyright reasons.
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases. 
×