Distant Thunder was ultimately unsuccessful, but as the universe started to rip apart, a black Optimus Prime clone appeared. The Binaltech universe was split into its own separate continuity, while the original timeline was also restored, stabilizing the multiverse. The clone, friendly to the transformers, proclaimed that the Binaltech universe must be allowed to continue, as it was important to the future. Optimus Prime questioned the black doppelganger, who explained only that he carried "the Protector's" spark, but refused to reveal any more detailed information. Soon after, the clone, who was originally developed by Dr. Archeville as a weapon of evil, ejected the spark that had invaded and taken over the black figure, reverting to its original evil programming. The malevolent Nemesis Prime, no longer just a black version of Optimus, escaped.
When reports from both Jetfire and Mirage corroborated that the Decepticons were constructing giant rockets to shift Earth out of its orbit, Optimus took to the skies and led his troops on a sabotage mission. Upon their approach, Optimus, Jetfire, and Deftwing overheard Megatron declare that the engines would fire up in twenty minutes. With little time to prevent the destruction of Earth's biosphere, the more maneuverable air-bound Autobots entered the thruster tubes to destroy the rockets from within. Jetfire and Deftwing were successful in their task, and the Autobots beat a hasty retreat to avoid the resulting lava swell. Optimus heaped praise upon the pair afterwards, embarrassing the bashful Jetfire. Moving Day Planet Earth 

MATTY COLLECTOR SPECIAL SALE If you missed out on the original Matty Collector figures, you’re in luck; many items are back in limited quantities! https://www.bigbadtoystore.com/Search?T ... geSize=100 ------------- NEW PREORDERS ------------- TRANSFORMERS STUDIO SERIES Reach past the big screen and build the ultimate Transformers collection with Studio Series figures, inspired by iconic movie scenes and designed with specs and details to reflect the Transformers movie - Read More
Part of 9th wave of One-Step Changers, and the first of the Combiner Force subline, this Optimus Prime is yet another new mold, with a different transformation scheme (a similar engineering to Age of Extinction's Bumblebee) consisting of pulling the switch on the back (do not hold the truck kibble when you transform him). Like most One-Step Changers, Optimus Prime features limited articulation on the shoulders, and features 5mm compatible hands.
The third version [5] would quite possibly have been the most gimmick loaded Transformer in the history of the line, simultaneously being a Powermaster, Headmaster, and triple changer. The Headmaster also would have been a triplechanger, turning into a sort of armored four-wheeled rover (Roller II?) and robot as well as a rather silly looking Optimus Prime head with four vertically aligned wheels jutting off the sides. It seems that when the extra Headmaster gimmick was scrapped, the super mode head remained separate rather than being reintegrated into the trailer hitch such as on the earliest design. Notably, the body of this design is extremely close to the final design.
Studio Series Optimus Prime is an all new Voyager Class mold that transforms from robot into a Peterbilt 379 semi-truck. He comes with a pair of Energon Swords, which can be mounted onto his arms or store on the back of his robot mode or truck mode. The figure combines engineering concepts from his Age of Extinction Voyager Class figure with techniques previously used on Prime: First Edition Optimus Prime. He also features a more subdued color scheme compared to other Optimus Prime figures. Like the rest of the Studio Series figures, the figure prioritizes robot mode scale and thus stands shorter than his Voyager Class wavemate Starscream. The CG renders depict him possessing long smokestacks, but the final product has them shortened... again. He also comes with a cardboard backdrop display depicting the climatic forest battle from Revenge of the Fallen.
Some time later, as the war raged between Autobots and Decepticons on Earth, Optimus had requested the Aerialbots as reinforcements from Cybertron. Though they nearly defected to the Decepticons, Optimus was able to secure the Aerialbots as allies. Later, when a power plant had to be evacuated of its human workers due to the fear of landslides, Optimus posted Denfensor at the location to secure its protection. Optimus then drove off to check up on the rest of his troops who were aiding in the area’s evacuation. Though he passed a military convoy heading towards a plant, he thought nothing of it, unaware that they were the newly created Combaticons in disguise. Optimus then reached the Ark, and from there opened communications with the Aerialbots. Optimus had someone come into the know that the Decepticons were moving in towards the plant. He watched from afar as Defensor and Superion fought Menasor and Bruticus, wary to send more Autobots into the fray while these titans wreaked havoc onto the battlefield. Optimus allowed himself a smile when the Aerialbots and the Protectobots proved themselves superior teams to the Decepticons’, though at the back of his mind, he was wary. After all, Megatron himself had chosen not to add his considerably weight to the battle... The Special Teams
This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.

The back story of the Transformers on ancient Cybertron is told in Transformers: Defiance. In this story, Starscream returns to Cybertron after encountering an enemy scout ship in the Eshems Nebula. After being repaired for minor damage by Ratchet, Starscream and Ironhide report to Optimus Prime and Megatron.[63] In issue #2, Optimus Prime is ordered by Megatron to counter-attack Cybertron's invaders, but instead, Optimus organizes a resistance to Megatron's decision. In issue #3, Optimus Prime, Jazz, and Prowl break into Megatron's quarters while he is away looking for clues to why he is acting so strangely. What they find is an ancient artifact that Megatron had restored.[64]
After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.
As the Binaltech saga unfolds, the multiverse is threatened with destruction, until the original continuity is restored and the Binaltech universe is split into and preserved within its own separate universe. Overdrive confirms that the threat is over by visiting the dimension occupied by the original timeline, and reveals that in that world, Hot Rod had received the Matrix and taken over leadership of the Autobots as Rodimus Prime.
Following this, Prime began to experience subconscious urgings, leading both the Autobots and the Decepticons to the Arctic Circle, where Shockwave arrived to greet them—and arrest them as war criminals. Shockwave had succeeded in ending the war on Cybertron, and brought a team of Triple Changers to apprehend them. As Optimus stared down Blitzwing's cannon barrel, he was saved by Grimlock, though he subsequently had to order a retreat. Prowl convinced him to let a small team stay as recon while the others returned to the Ark and discussed the change in situation. New World Order Though Optimus was puzzled by Ultra Magnus having fallen in with Shockwave, he had little other choice, and surrendered to Magnus. Despite being bound, he took the first opportunity he got to make his feelings clear. Prime and those of his Autobots who had also surrendered were put on a shuttle back to Cybertron, where Shockwave planned to have them deactivated. Brothers' Burden

© 2019 Hasbro.com All rights reserved. All audio, visual and textual content on this site (including all names, characters, images, trademarks and logos) are protected by trademark, copyrights and other Intellectual Property rights owned by Hasbro or its subsidiaries, licensors, licensees, suppliers and accounts. By using this site, you agree to the Terms and Conditions of Use.

Two custom-made pieces (presented in robot and vehicle mode) by the Hasbro Transformers team as the grand prize for G4TV and Jumpcut's contest for fans to remix selected Transformers clips. Won by TFW2005.com member James Zahn, this one-of-a-kind (well, two-of-a-kind) piece is an almost fully vacuum-metallized Leader-class Optimus Prime in red, silver and blue (based heavily upon Generation 1 Optimus Prime), presented with a custom display base with an embossed silver Autobot insignia and a perspex display case.


Adventure Lucky Draw Optimus Prime is a gold vacuum metalized redeco of the original Warrior Class figure (save for some of his unpaintable thighs & upper shoulders) released as a prize for the Transformers Adventure prize draw campaign held between 25 July 2015 and 30 September 2015. To obtain it, entrants needed to send in four robot points clipped from the packaging of Transformers Adventure products.
If the Autobots went along with Prowl’s strategy, the resulting heat from the explosion caused the Autobots’ circuits to overheat, rendering them unconscious. Upon reawakening, the Autobots found themselves captives of Megatron, who informed them that their fellow Autobots would soon perish, and that the humans would be conquered by the Decepticons shortly after.
Virtually every toy in this list has a scannable insignia sticker on it. For Hasbro releases, it temporarily unlocks that toy as a playable character in the Robots in Disguise mobile game, and can only be scanned once per day. TakaraTomy releases simply check that off on their mobile app's collection list. It's honestly quicker and less redundant to say which toys don't have this feature. Meanwhile, scanning the Combiner Force toys' insignia stickers gives the player Tickets, which can be spent by giving them to Cryostase via the main map menu.
In Transformers: Alliance, Optimus Prime and the Autobots aid the human soldiers after the battle in Mission City and destroy the Allspark-powered machines that were created. A trailer is obtained for Optimus Prime to carry the remains of Jazz. The Autobots leave Mission City as the Sector 7 personnel arrive to claim the remains of the Decepticons. About a month later, Epps and Lennox contact Optimus Prime about aiding them in escorting the remains of the Decepticons to the naval yard. They are spied on by Barricade, who transmitts the information to Starscream.

The largest Movie Optimus Prime toy (until Revenge of the Fallen, that is), Leader Class Optimus Prime features the most accurate representation yet of the CGI designs' complex transformation sequence, the only difference being the arms which are placed behind the cab while they constitute the hood in the CGI model. He transforms into a heavily-customized Peterbilt 379 conventional extended-hood, and unusually for a mainline figure, he has rubber tires on all his wheels. His Ion Blaster weapon is stored in the rear of the truck's bunk, exposed like an engine block. Though Optimus has no trailer, he has a hole where the fifth wheel (known among fans as a 'hitch') is sculpted in the rear of the truck, should owners find a suitable trailer to use. Due to safety reasons, the tips of his long smokestacks are made of rubber. A switch on top of the cab roof activates horn sounds and window lights.
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.
×