He was only available as an Amazon exclusive in the United States, but was also released at brick and mortar retails in Australia and Hasbro's Asian markets, such as Singapore. Oddly enough, even though the official press release for the figure identifies it as "14 of 30" in Hasbro's Thrilling 30 campaign, the packaging does not sport any such markings.[3] To complicate matters further, a later retrospective by Hasbro on Facebook identifies another product as "14 of 30", which doesn't sport any such markings on its packaging either.[4]
"Hero Mashers" Optimus Prime, Bumblebee and Grimlock took on Megatron in the middle of a busy city. Optimus came to Bumblebee's help while riding atop of Grimlock, swapping heads with his mount to bite Megatron's arm off, getting a hold of the Decepticon's jetpack at the same time. He attached both pieces to himself, and flew around for a bit before returning to the battle. He thoroughly scrambled his pieces with those of his teammates, then took down Megatron with his "dino-fist." Afterwards, the Autobots returned to their normal configurations (though it took them more than one try to do so!) Hero Mashers commercial
Hot Rod first appeared in the Headmasters limited series as one of the Autobot crew led by Fortress Maximus. He became a Targetmaster in the fourth and final issue of the series. However, his Targetmaster partner is called Sparks, instead of Firebolt (though the UK comic would occasionally call him Firebolt). Hot Rod made sporadic appearances, with a few UK stories starring him as the lead, but most of those were set in the past or future. Kup's Story revealed the first meeting between Kup and Hot Rod, and how Hot Rod's influence shook Kup out of depression; and Ark Duty starred Hot Rod and set up the creation of Autobot City. Hot Rod debuted in the main continuity after the loss of many wars to the Underbase powered Starscream, as part of Fortress Maximus' group. He served as an eager soldier who idolized Optimus. However, he was killed during the Decepticon ambush on Klo in the last issue of the Marvel G1 comic, only to be resurrected by Prime and the Last Autobot.
Optimus Prime is one of the playable Autobot characters in the 2010 video game Transformers: War for Cybertron. In the Autobot campaign, he starts off as Optimus, a warrior who rallies his fellow autobots against the Decepticons following the reported death of their leader Zeta Prime. He succeeds in defending the Autobots' home city of Iacon from Starscream and his forces. Optimus then receives a distress call from Zeta Prime. Knowing that this is most likely a trap set by Megatron, he proceeds anyway with a rescue mission. He lets himself, Bumblebee, and SideSwipe be captured by the Decepticons and is sent to a prison in Kaon, the decepticon capital, in an elaborate scheme to free Zeta Prime and all imprisoned Autobots. He frees all the other prisoners, and defeats Soundwave and his minions Frenzy, Rumble, and Laserbeak, but he is too late to save Zeta Prime. After taking Zeta Prime's body back to the Autobot high council, he is bestowed upon the well earned title of Prime.
With the major threats taken care of, Optimus Prime turned his and the Autobots' attention to identifying and shutting down the rogue projects taking place across Earth using stolen Binaltech technology and secrets. It was during one of these missions that Optimus Prime faced off against Nemesis Prime, both in Binaltech Dodge Ram forms. Initially, things looked bad for Optimus Prime, as he was no match for his opponent's spectral armor. However, the Protector merged with Prime, and the enormous power that resulted allowed Prime to reflect Nemesis Prime's final attack, obliterating the evil Decepticon. Optimus Prime recalls the union of the two sparks being familiar, from an event in the distant past. Optimus Prime is reassured by the Protector about "the seeds of the future" and the Protector is revealed to be Optimus Primal.
The values started becoming inconsistent and skewed in Generation 2 and Beast Wars, when Hasbro apparently thought no child will ever want a toy that is described as anything less than perfect. Thus it became rarer and rarer to see any low numbers. Most characters' numbers hardly ever dipped below 8, the Go-Bot version of Optimus Prime was the first character to have all values at 10, a trend that would repeat for most "leader" characters. When even more powerful versions of the Optimus Primal toy (such as Optimal Optimus) were introduced, Hasbro even invented a "10+" rating in an attempt to keep increasing the power levels. With the Transformers: Cybertron line a few characters even got "Unknown" and "Infinity" ratings.
Get ready to turn heads with TRANSFORMERS MIGHTY MUGGS Figures. Call it a moodswing, or call it a moodSPIN, these TRANSFORMERS MIGHTY MUGGS figures feature a push-and-turn mechanism that lets fans change the figure’s facial expression by pushing down on the head. With 3 different expressions and classic character designs, these figures will have fans doing a triple take. Characters include BUMBLEBEE, OPTIMUS PRIME, MEGATRON and more. Each sold separately. Available at most major retailers and on HasbroToyShop.com.
For accessories, he comes with (according to his bio) "the ancient weapons of the Primes", such as his Nexus Sword (a reference to Nexus Prime), the Vector Shield (an upscaled, non-transforming version of the shield from his Cyberverse "Beast Blade" toy, and a reference to Vector Prime), as well as a generic cannon with a pressure-fired missile. All of his accessories can peg into his hands, right forearm, backside, and vehicle sides.
Hey now, dont lump all geewunners together lol. Im all about g1, and love seeing g1 inspired, yet evolved designs. Such as the bee movie, and the recent toy lines. That said, I do respect others opinions. My son prefers bayverse on most and thats ok. I hate bayverse designs (except barricade and nitro zues in the last movie, badasses) but alot of people grew up on that, and it makes hasbro money, so no reason to hate it all together.

Generation 1 Optimus Prime has appeared in numerous video games since the introduction of the Transformers series. He makes a cameo in the 1999 Beast Wars Transmetals video game for Nintendo 64, where he is killed by Megatron at the end of the campaign, showing what would have happened in the Beast Wars series with a Predacon victory. Prime is also one of the playable characters in the 2003 Japan-only Transformers game for the PlayStation 2 and the 2010 Transformers: War for Cybertron. Optimus Prime is also playable in the Hasbro Net Jet Transformers fighting game Transformers Battle Universe. Three versions of Optimus Prime are playable characters, including the first generation incarnation, his incarnations from the 2007 live-action film, and the incarnation from Transformers Animated. In this game, Optimus Primal is also a playable character. He is a regular character in the Nintendo GameCube and PlayStation 2 2003 fighting game DreamMix TV World Fighters. He appeared as a boss in a simple Flash-based video game on the Hasbro web site.[17]

Legion Class Optimus Prime is a redeco/retool of the first Revenge of the Fallen Legends Class figure, with the deco resembling the paint job from Optimus Prime's Western Star "5700 OP" concept truck. While the main body is identical to the figure, the arms and legs are newly tooled, with simple assemblies for the wheels. The retooled legs now features a more solid stopping point, which prevents the center front grill/legs to swing back further. It should be noted that his flame decals are painted over the side windows.
This, of course, is all secondary to the main draw of the figure: it pulls an all-white trailer, which transforms into a working iPod speaker dock by rotating a substantial wedge of its full length 90 degrees . The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer. Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor with advice from an electronics specialty shop is recommended.

This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.
This new smaller mold of Optimus Prime features a similar transformation to the original toy. Unlike most transformable figures in this line, Optimus completely lacks 5mm fist holes. Compared to the finalized toy, the product photo on the back of the box has a number of deco differences, most notably silver thighs and white accents above the front windows in addition to those below. The same box photo and the more deco-accurate stock photo (right) also neglect to fold out his fists, which is the only other step in his two-step transformation.

With the acclaimed Studio Series line marching onward triumphantly into 2019, we have just received a new review of the line’s latest offering, Battle-Damaged Megatron, which most of us know emulates Megatron’s appearance following the climactic final showdown between him, Optimus Prime and the Fallen in the second film. The review comes courtesy of YouTuber PrimeVs.Prime, who has thus far extensively catalogued the line beyond today’s subject. He goes into detail regarding the detailing - Read More
Part of the first wave of Generations: Combiner Wars Voyager Class toys, this is a bigger, bulkier incarnation of Optimus Prime with a striking resemblance to Ginrai. He comes with two blasters which he holds via 5mm post. One of the guns is based on his trademark Ion Blaster, and both weapons store on the back of his vehicle mode as a makeshift engine block. His torso mode has several details that appear to be influenced by Energon Optimus Prime's super mode, including the head, chest, and thighs. In particular, the chest details are modeled after the Spark of Combination. He also features two pair of fake windows on his robot and gestalt chest halves. The combiner head can be used as a robot mode head if you're feeling silly.
When you’re a Cybertronian robot-alien who could easily blow any human to bits if you wanted, having a license plate can’t be that important. Really, if you’re in car mode and a cop pulls you over for not having plates, and sees that you also don’t have a driver, and then perhaps sees you turn into a giant robot, what exactly is that cop going to do?
A extensive retool of Lockdown, transforming into a Lamborghini Centenario. An exclusive to Walmart stores and part of the "Autobots Unite" subline, While almost the entire figure has been remolded, the lower legs and feet remain unchanged. The figure is overall a bit taller in stature than the base mold and includes extra steps in the transformation which further differentiate the two. Uncommon for deluxe class toys, the figure does not include any weapons or accessories.
The first Nightwatch Optimus Prime is an extensive redeco of the previously released Leader-class Optimus Prime, replacing most of his red and blue with different shades of blue and black. In fact, he resembles the original Diaclone Powered Convoy color scheme of Generation 1 Ultra Magnus's truck cab. The previously blue and red flames have been replaced with silver flames, while various other decos have been replaced by copper.
It took two further years, but this figure was eventually released as part of the Japanese counterpart to the Alternators line (Binaltech) in 2008. Binaltech Convoy features some additional paint details, like his silver pelvis, additional patterns on his shoulders, and red paint on his engine-gun, and like all Binaltech figures, he also includes die-cast metal pieces. Unlike previous Binaltech releases, a bio-card was not included.
Released as part of the Target-exclusive Reveal The Shield subline, this Tiny Turbo Changer 3-pack contains a redecoed Optimus Prime and Bumblebee (in their first non-blindpacked release) and a new Steelbane figure. This version of Optimus features red wheels & Tech Spec-esque patterns on his robot mode chest and... groin-flaps, though the real decoding is on his vehicle mode roof, which when seen through the attached clear-red weapons (or similar plastic device) reveals... an Autobot symbol. Surprise.

Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[11] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
In Spotlight: Doubledealer, Hot Rod's search was interrupted by Dealer's arrival on Earth, with orders for Hot Rod: find the Magnificence and use it to learn what they could about the Expansion. Hot Rod took Dealer to his hiding spot, which turned out to be the planet where they first found the device. As Dealer and Hot Rod closed on the Magnificence, he went over his first visit to the planet in his mind, and how things could have gone so wrong. Eventually he began to have suspicions, and upon locating the Magnificence, asked it the question that haunted him: had Dealer betrayed him? Sadly, it revealed the truth, and Hot Rod was forced to kill Dealer as the traitor attacked. Looking down on his remains, Hot Rod realized the truth had been staring him in the face, he just had not wanted to accept it. He then used the Magnificence to find out all he could about the Expansion, and relayed the information to the Autobots.
Released to commemorate the 10th anniversary of Revenge of the Fallen, this Studio Series Optimus Prime is a retool of the figure above, featuring many new parts, namely a new backpack, chest piece, and a pair of non-transforming fenders/legs, to better resemble his appearance in the first two movies. These new parts allow him to combine with Studio Series Jetfire to form "Jetwing Optimus Prime." His color scheme features a much higher contrast than the previous release. Instead of Energon Swords, he now comes with an ion blaster like that used in the battle of Mission City. He also comes with a cardboard backdrop display depicting the highway fight with Bonecrusher from the first Transformers film.
The first Transformers toys were created from two different transforming robot toylines from Takara, the Car-Robots and Micro Change, from the Diaclone and Microman series, respectively. Hasbro acquired the rights to sell them in the United States but, instead of selling them under their original names, they were rebranded as "The Transformers". The first two years consisted primarily of reusing the Car-Robots/Micro Change molds. The earliest toys had some parts made of die-cast metal, which were eventually phased out.
As part of the Robot Replicas line, this version of Optimus is a non-transforming action figure that utilizes Revoltech-style jointing. The sculpt hews much closer to the movie CGI model than is possible with the full transforming toys, plus the universal jointing of the line allows for his forearm to be replaced with his hand-cannon... or bits from other Robot Replicas.
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.
For accessories, he comes with (according to his bio) "the ancient weapons of the Primes", such as his Nexus Sword (a reference to Nexus Prime), the Vector Shield (an upscaled, non-transforming version of the shield from his Cyberverse "Beast Blade" toy, and a reference to Vector Prime), as well as a generic cannon with a pressure-fired missile. All of his accessories can peg into his hands, right forearm, backside, and vehicle sides.
Minor note: Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
This version of Optimus is a redeco of the original Legion Class Optimus Prime toy, featuring additional paint details. He features an Autobot insignia on his faux chest. His head was not entirely clipped down in his stock photos. The stock photos shows him having darker plastics & silver paint as opposed to the final product. This seems to have been a trick of the lighting, as the released toy remained its standard plastic colors & silver paint apps.
This Trailer is identical to the original BeCool Trailer other than the stickers, and now comes with the trailer/launcher accessory from Bot Shots redecoed in blue with red stripes. While the vehicle mode sticker in his chest remains, the hand-holding and sleeping ones have been replaced by pictures of the launcher: one in base mode and one in trailer mode. He also comes with a sticker sheet for decorating the Trailer Base.
An all-new Leader class figure of Optimus Prime, featuring a robot design and transformation that is closer to its film counterpart than the 2007 toy version. Features retractable blades on both forearms. New "MechAlive" feature consists of visible moving gears in the chest behind the cab windows. At the push of a button on the back of the cab, the truck mode emits an engine idling sound. The transformation sound is played when the upper torso and lower torso are connected. A recording of Peter Cullen saying, "I am Optimus Prime!" is played when his chest is pushed upward via a lever on his waist.[97]

Available exclusively at the Tokyo Toy Show 2012 (along with Prime Shining Optimus Prime), Black Optimus Prime is a very minor redeco of the previously unreleased Gentei! Gentei! black version of Henkei! Henkei! Convoy, itself a redeco of the Classics Voyager Class toy. As such, Black Optimus Prime is mostly cast in black plastic, with some gray parts, translucent red windows and teal paint operations.
Generations Selects Ricochet and Red Swoop - Following our last news post regarding this new "Generations Selects" toyline (previously called "Select Series"), we finally have new images of the first two releases, Deluxe Class Red Swoop and Ricochet! These two figures are redecos of Power of the Primes Swoop and Jazz respectively. Red Swoop is based of the original G1 toy's colors (which can be found on the stock renders for the Power of the Primes toy), while Ricochet is meant to evoke the Headmasters character Stepper.
Platinum Edition "Year of the Snake" Optimus Prime is a redeco of Energon Super Class Optimus Prime. In lieu of combining with his drones, Optimus Prime can also combine with Platinum Edition Omega Supreme to form what his instructions also call "Super Optimus Prime". The drones are color-matched to Omega Supreme, and can attach to four connectors on his body. In an undocumented feature, Prime can also merge with Energon Wing Saber.
He comes with a shield with a fold-out handle, allowing Optimus to hold onto it with either hand in robot mode. It has a simple transformation gimmick for vehicle mode which is activated by pressing a button at the top of the shield, causing the sides to spring outwards. In vehicle mode, the shield can be laid flat across the bed of the truck, attaching via a post on the back onto the truck’s trailer hitch. Alternatively, the bumpers on the shield can be rotated outwards, and the front can be bent down in order to form a new front end and hood for "battle vehicle mode", resembling the Stealth Force vehicle modes seen in Dark of the Moon.

Punch reported back to Optimus on what he had learned about the Decepticons as Counterpunch. Mainly, that they were planning on attending BotCon 2010. Optimus then turned to Teletraan I for more information about BotCon. Upon learning that special honors would be held for him at the convention, Optimus led his troops to BotCon once more. BotCon 2010 Promo
He reappeared in the third crossover, where he apparently acted as Optimus Prime's right-hand man. Putting a team together to look for the missing team that had journeyed to Earth (who had been captured by Serpentor and the Decepticons), he would later lead the combined G.I. Joe/Autobot force that rescued Optimus Prime. In contrast to his usual "youthful rookie" portrayal here Hot Rod seems to be in a high command position, outranking Ultra Magnus, Prowl and Ironhide among others. However, by the fourth crossover Hot Rod is forced to wait on Cybertron under Magnus's command as Optimus Prime journeys to Earth.
In 2003, Takara introduced the Masterpiece MP-01 Convoy/Optimus Prime. While retaining the original concept of a transforming semi-trailer truck, this die-cast figure incorporated modern toy manufacturing techniques for improved detail and articulation, while, at the same time, captured the look of the cartoon character. It has since been released by both Hasbro and Takara Tomy in different variations. In 2010, a version of the Masterpiece toy, called Masterpiece Convoy Sleep Mode, was released, painted in dark colors to match the appearance of Optimus Prime after his death in the 1986 film.[21]
This gold vacuum metallized (save for his black joints, which they were made out of unpaintable plastic) Protoform Optimus Prime figure was featured as a Lucky Draw giveaway (along side similarly gold vac-metal versions of Voyager class Optimus Prime and Protoform Starscream) in the December 2007 issue of TV Magazine. Released in 2008, only 5 pieces were made, making it one of the rarest Lucky Draw figures; the images at right represent the only known photographs of it.

Available only at KB Toys, Machine Wars Optimus Prime is a redeco and slight retool of the European Generation 1 exclusive Turbomaster leader Thunder Clash, transforming into a Cybertronic truck cab. It's easy to see why Thunder Clash was chosen to become the new Optimus Prime, given his adherence to Prime tradition: the cab disconnects to become the robot, while the trailer unfolds to become an assault tower with twin missile launchers. On the original Thunder Clash version of the mold, the launchers operated on a gravity-feed system that saw a new missile drop into the launcher from above each time one was fired, allowing for twelve to be fired in rapid succession, but for Machine Wars Prime, this feature had to be dialed back for safety reasons. The missiles had to be lengthened to prevent choking hazards, and so the toy's launchers were modified to accommodate them, becoming straightforward spring-loaded single-firing weapons.
A later prototype/mock-up was much closer to the final product but still has some noticeable differences, such as a head with much larger antennae, longer smokestacks and a front grille section that includes the rectangular section that would sport the "Freightliner" logo on the real-life truck (on the final toy, the rectangular section is part of the hinged upper section that includes the windows). It would have also been possible to attach the ion blaster to either of his shoulders.[12]
In addition to being probably the most popular Generation 2 figure, Laser Optimus Prime was, prior to 2003, a regular contender for most popular Transformers toy ever, back in the days of the annual Transformers fan awards, "The Trannies." The toy won twice, and actually lost once to his repaint, Scourge. The launch of the Armada and Alternators line, along with Masterpiece Prime, saw Laser Prime drop down that list distinctly.
The stickers may not be cut right, my copy has them off-center, they're probably using an 80's type bladed stamp with little QC to rush them out. The cab will not have the stripes applied, those are included on a strip of mylar/foil/whatever silver but you have to measure and cut them to fit. Every KO can be identified easily by these missing stickers in the box. Older releases also had the trailer's stickers separate but those have not been made in some time.

A redeco of the first Sports Label Convoy, this figure transforms into a white, navy, and grey sneaker. Promotional images for the figure depicted its robot mode as white and aqua-blue, but the finished product was visibly darker, produced in shades of off-white and dark teal. In either coloration, it sure as heck looks like it should be Ultra Magnus, but for whatever reason... it ain't.
Hot Rod was then summoned to Earth by Optimus Prime, as revealed in The Transformers: Escalation. With typical bravado Hot Rod and Hardhead insisted on heading to assist Prime's unit in stopping Megatron. Hot Rod left Hardhead to assist the other Autobots while he captured the Decepticon facsimile. Unfortunately, he almost collided with Prowl, who had had the same idea. Despite some bickering between the two, they were able to eventually capture the facsimile, forcing the Russian troops to back down. When Hot Rod heard the battle between the Ore-13 powered Megatron and the rest of Prime's troops, Prowl forbade him from interfering, entrusting him with the safe return of the facsimile. Calling Nightbeat for transport out, he was jumped and severely damaged by Skywarp and Thundercracker. Nightbeat teleported him away, but Hot Rod had been badly damaged, and the facsimile reportedly killed.
Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He is love, in bed.
Studio Series Optimus Prime is an all new Voyager Class mold that transforms from robot into a Peterbilt 379 semi-truck. He comes with a pair of Energon Swords, which can be mounted onto his arms or store on the back of his robot mode or truck mode. The figure combines engineering concepts from his Age of Extinction Voyager Class figure with techniques previously used on Prime: First Edition Optimus Prime. He also features a more subdued color scheme compared to other Optimus Prime figures. Like the rest of the Studio Series figures, the figure prioritizes robot mode scale and thus stands shorter than his Voyager Class wavemate Starscream. The CG renders depict him possessing long smokestacks, but the final product has them shortened... again. He also comes with a cardboard backdrop display depicting the climatic forest battle from Revenge of the Fallen.
Pressing the button on his robot mode chest activates the red lights (well, because the blue ones are expensive for the price point) on his chest, and the sounds and voice phrases (provided by Taitem Kusunoki) were played along with the light-up gimmick. Pressing the button for a few seconds will activate his long voice line with transformation sounds.
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
In "Sick Mind", Optimus is infected with the life-threatening Cybonic plague, prompting Arcee and Bumblebee to infiltrate the Nemesis to find a cure for the virus Megatron himself created. As Optimus grows weaker, he learns of Megatron's survival of the space bridge explosion. It was Bumblebee entering Megatron's mind via cortical psychic patch and retrieving the cure that saved Optimus. In the next episode, "Out of His Head", Optimus is, surprisingly, saved by the revived Megatron when he intercepted Starscream's attempted nosedive to kill him.
×