One peaceful day, Optimus decided it was too quiet, and sent Bumblebee and Mirage to find out what the Decepticons were up to. Sure enough, the Decepticons were looking for a factory, so Optimus had Mirage create a holographic factory as a trick, and ambushed the Decepticons. Optimus himself hurled Megatron into orbit. Decepticon Patrol Optimus and his Autobots rescued Sparkplug and Buster Witwicky when the pair were captured by Decepticons, and afterwards Prime was amazed when Sparkplug repaired Wheeljack and Prowl. After Bumblebee and Hound discovered that the Decepticons were attacking Hoover Dam, Optimus and his team defeated them. The Deadly Fuel Shortage
Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.
On Cybertron, Optimus Prime kicked back to do a little bit of paperwork and reminisce. With Shockwave defeated, Cybertron was enjoying a new era of peace. He was interrupted by Hot Rod, who reported that a group of "pesky humans with their peashooters" were giving an Autobot team on Earth a hard time. Prime suspected Cobra's involvement and counseled Hot Rod not to be so dismissive of the humans. The Art of War #1 When the team returned to Cybertron and mysteriously vanished in the Gladiator Zone, Prime was prepared to go search for them, but was convinced by Hot Rod to stay behind and organize a peace ceremony. The Art of War #2
During the period between December 26 2010 and January 31 2011, Hasbro ran their "Supercharge Your Holidays" promotion: for every $20 spent on Hasbro-branded product, customers could receive a free, random product from a list provided by Hasbro. Among the items on the list was "Transformers Activator & Speed Stars Mini Vehicle". According to this discussion thread on Allspark.com, Rally Rumble Optimus Prime (as the figure is listed in the thread) was one of the figures distributed.

Take note that the leg construction (thigh parts with legs consists of rear wheels/fifth wheel hitch & engine compartment/flip out legs combination) can become loose after a long time of play due to being used with transformation. Also, the legs did not seem to securely connect due to the hitch's shallow holes & the front half of the legs' small pegs. Also, attaching weapons with 3mm posts on the Battle Cannons' holes can cause some stress marks.
This set's Optimusses are based on the Prime incarnation. The larger Optimus is a smaller, simpler build than the first big kit, and makes use of ball-and-socket parts for increased articulation. It also carries a spring-loaded missile launcher. The Optimus Kreon's tampographs are based directly on the Prime cartoon model, though he carries an energon axe akin to the one from the War for Cybertron games. He also has a clear-blue extra "energon" torso piece.

Eject lamented that all the great and famous Cybertronians, including Optimus Prime, were long gone by the time Cybertron was controlled by the Builder Assembly. Broken Windshields The Maximal Overshoot experienced a series of visions from Cybertron's past after discovering the Oracle, including Optimus Prime launching the Ark during the Great War. Cultural Appropriation
He resembles previous Optimus characters in robot mode: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
Part of the fourth wave of Prime: Beast Hunters Cyberverse Commander Class toys, Beast Blade Optimus Prime is a jungle-themed green and blue redeco of his Series 3 Cyberverse Commander Class toy, coming with a new Battlewing Shield accessory in addition to retaining both the Thunder Lance and Star Saber. His shield can open up to form wings, and can be pegged onto the ridge on top of the vehicle's cage compartment, or mount onto the screw-hole on his, er, robot butt.
Another Hasbro release of the MP-10 mold, which is basically a reissue of the 2010 Transformers line's Masterpiece Optimus Prime, but with the Japanese release's ID Number. Surprisingly he is NOT mistransformed on the initial official photography... until secondary stock photos had the vehicle mode slightly mistransformed. Unlike the original, Hasbro version, this version features silver paint on the interior of the trailer. This version also removes the red paint on the die cast hinge piece in his body and replaces it with blue paint. Sadly, this figure doesn't come with the Key to Vector Sigma. Due to compact packaging, the trailer is prone to scuffing.
A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
During the Cybertronian Civil War, Sentinel Prime was killed. Prior to his destruction, he bestowed the Matrix of Leadership to Optimus Prime, who became the new leader of the Autobots. Despite being one of the youngest Cybertronian leaders, Optimus demonstrated extraordinary courage and wisdom in the war against the Decepticons. He: treated all lives with benevolence, fought for freedom and peace, and continues to fight to protect the weak and maintain their beliefs.
This redeco of Leader-class Optimus Prime replaced most of the plastics in the cab robot with colored translucent equivalents, with chromed silver wrist-pipes, a golden chrome Matrix, and red chrome window frames. His trailer remained opaque, but was cast in much deeper red plastic, with a more metallic silver used for his cannons. He was available only in a Toys"R"Us Japanese exclusive giftset released in October 2005, with a redeco of Wing Saber, and the Coby Sen'yō Rumble.
In the two-part episode "Megatron Rising", Optimus loses his composure over the recent numerous Decepticon attacks coupled with the fact that Prowl had secretly placed the Dinobots on an island off the coast of Detroit instead of destroying them. He has Ratchet confiscate the Allspark key from Sari, which he loses when he is ambushed by Blitzwing. Optimus also fails to stop a newly resurrected Megatron from acquiring the Allspark. He defeats Megatron by overloading the Allspark in his chest with Sari's key. In the process, the Allspark shatters into countless pieces, scattering all across Detroit.
Virtually every toy in this list has a scannable insignia sticker on it. For Hasbro releases, it temporarily unlocks that toy as a playable character in the Robots in Disguise mobile game, and can only be scanned once per day. TakaraTomy releases simply check that off on their mobile app's collection list. It's honestly quicker and less redundant to say which toys don't have this feature. Meanwhile, scanning the Combiner Force toys' insignia stickers gives the player Tickets, which can be spent by giving them to Cryostase via the main map menu.
After the film, in season three, Rodimus did not have time to rest on his laurels as commander, immediately finding himself and the Autobots targeted by the Quintessons, who lured him to their planet of Quintessa and detonated it in hopes of destroying the Matrix. Rodimus and the Autobots survived, however, and Rodimus proceeded to voluntarily short-circuit himself to allow his life-force to enter the Matrix, feeling that the answer to the mystery of the Quintessons' identity lay within it. His hunch proved correct – the Quintessons, he discovered, were the Transformers' creators, and Rodimus knew that the future would be a difficult time for the Autobots.
Prime was perpetually at the forefront of the action throughout the early years of the war on Earth, usually confronting Megatron, though in some rare instances, such as against the Insecticon-controlled Decepticons or the Combaticons, teaming up with him for the greater good. He has suffered his fair share of battlefield scrapes, almost meeting his end when his vital cosmotron component was critically damaged by the Decepticon jets and when Laserbeak had his body disassembled and turned into Decepticon trophies, such as a pet "alligaticon" and a defense laser.
In Transformers: Autobots, Optimus Prime meets up with the other Autobots to give further commands to his troops. Create-A-Bot, the new rookie, is eager to help in the cause, but Optimus tells him to sit back while the other Autobots fight the Decepticons. Create-A-Bot finally defies orders and completes a mission against Optimus's council. After nearly getting himself and the other Autobots killed, Create-A-Bot apologizes to Optimus personally. Taking pity on the newcomer, Optimus lets him off with a stern warning, and they move out together to face Megatron, who has absorbed the power of the Allspark. Optimus fights Megatron, but Megatron gains the upper-hand. Optimus is on the verge of defeat when Create-A-Bot takes the Allspark and drives to Megatron's chest, weakening Megatron but mortally wounding himself in the process. Optimus fights Megatron again, defeating him. As Megatron is on the ground, he tells Optimus that if he kills him, the Allspark will be destroyed and Cybertron will never be restored. Optimus says to Megatron that he will do what he must do, then he raises his sword and kills Megatron, destroying the Allspark in the process. Create-A-Bot also dies, but not before telling Optimus his final request to make Earth the new home of the Autobots and to protect the humans. The game ends with Optimus sending a message to all surviving Autobots taking refuge among the stars.
Part of the first wave of the "Mini-Con Weaponizers" subline imprint, this One-Step Changer figure of Optimus Prime is a new sculpt. In the Robots in Disguise mobile game, it was identified alternatively as an "Advanced One-Step" or "Evolved One-Step" figure depending on the user's region, but on the toy's packaging, no such modifiers are featured, and it is available as part of the regular One-Step Changer assortment. This figure shares most of its engineering with One-Step Fracture.
By the ‘90s, the genre had begun to fade, and boys' minds turned to more high-impact action, often centered around mutants, monsters, and karate. Hasbro saw potential in the embers of the Transformers brand, and turned it over to newly-acquired subsidiary Kenner for a jump-start. Kenner threw out all the old rules, and invented a line of Transformers that were more poseable, more feature-packed, and more exciting. Backed by a high-tech CGI cartoon, Beast Wars turned the brand around, making Transformers a bestseller again.

Fire Blast Optimus Prime is a redeco of the previously released Power Hook Optimus Prime fast action battler. The color scheme is loosely based upon Generation One Rodimus Prime, explained rather oddly in the card bio as being the camouflage Optimus took while hunting Decepticons on Mars post-movie. ...Because there are so many longnose cabs driving around Mars. Yeah.


The use of a G1-based Orion Pax design and an Aligned-based Optimus Prime design with Movie Optimus Prime packaging art makes it hard to know where on the wiki this should go, but given the general movie-themed bent of the Tribute line, we're putting it here. Continuing the tradition, the 2-pack was first released in some Asian countries like Taiwan without any prior announcement from Hasbro itself. A few months after the 2-pack's release, Tribute Optimus Prime & Orion Pax saw worldwide release through Amazon, including an Amazon Japan listing bearing a The Last Knight ID number.

The figure features newly redesigned hip ratchets to make both robot and combiner mode stable, which were also installed in both TakaraTomy's Motormaster, Grand Scourge, and a revision wave of Hasbro's Motormaster. The pegs that Legends Class Rodimus (or Blackjack) attach to have also been slightly modified to provide a tighter fit, making the latter toy much less prone to falling out.
Alternatively, if Optimus chose to retreat either when initially confronted with the overwhelming Decepticon threat, or after realizing that his troops are too weak to fight after ordering them to concentrate their firepower equally amongst the intruding Decepticons, the ensuing underground adventure can have multiple outcomes; the Autobots become the captive of the Insecticons, forcing Optimus to either entrust Beachcomber with the fate of his troops, or to bargain with the Insecticons for the safe release of his Autobots; or dealing with the theft of the Sun-Pak by either duelling Megatron for the device's ownership, stealing the Sun-Pak back from the Decepticons or charging Mirage and Buster with the device's retrieval. If Optimus duels Megatron for the device, he either wins through brute force or by being more "cunning" than Megatron and destroying the device before the Decepticons can claim it as their victory prize. If Optimus attempts to steal the Sun-Pak under the Decepticons' noses, Optimus is shot by Megatron when the Decepticon leader notices Optimus and Smokescreen skulking towards the Sun-Pak. The Autobots nonetheless retrieve it when Smokescreen blots out the sun with his emission fumes, forcing Megatron to pass the Sun-Pak towards Buzzsaw in order to bypass the Autobots' smog cover, only for Optimus to intercept Megatron's pass and drive away with the Sun-Pak in Autobot possession. Finally, if Optimus has entrusted the Sun-Pak's retrieval to Mirage and Buster, the Autobot leader makes the duo swear not to engage the enemy for fear of their safety. If his Autobots keep their promise to him, Optimus is called in alongside the rest of the Autobots when the Insecticons are discovered, and Optimus leads a successful ambush towards the Insecticons, at the cost of the Sun-Pak itself. Attack of the Insecticons
The real selling point of the toy, however, is the colossal Omega Combat Armor. Optimus' trailer transforms into nearly two feet of limb extensions, armor, and wings. The armor remains completely integrated (except for the Ultimax Super Cannon) during transformation, with no partsforming, although this renders the final power-up robot mode somewhat limited in articulation, having no leg articulation whatsoever aside from swinging the hips out slightly and twisting at the ankles for maximum stability. The armor adds six more 5mm ports of dubious utility around the feet, retains the four from the cab robot and the eight from the trailer (on the backs of the wings), and has his own pair of 5mm fist holes. In trailer mode, it can support itself using folding blue landing gear, although the attached ball-jointed struts make it somewhat less than realistic.
Fellow Seibertronian Actar has written an in depth review on the new Transformers Studio Series Jetfire. He gave us great images of all modes including the combined mode and the giant cannon. We see how it scales with both SS ROTF Megatron and the ROTF Fallen. Enjoy! Alrighty! Just got my hands on the latest SS Voyagers and Leaders. However, the one that has won me over the most is Jetfire. So, I was rather hesitant and critical about Jetfire when I first saw him, but - Read More
Generations "Combat Hero Optimus Prime" is a metallic-blue, gunmetal, and red redeco of United Laser Optimus Prime, having the retooled tab, and being based on the canceled Generation 2 Combat Hero Optimus Prime figure, sporting a red mouthplate inspired by the official catalog image for the unreleased toy (packaged samples had featured a traditionally colored gray mouthplate). He comes packed with a (vaguely) Generation 2-styled Deluxe Class Autobot Jazz, as well as unchanged releases of Generations Legends Class Thundercracker and Motorbreath.
Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.

Besides the inordinate number of Hogwarts Castles, we can draw similar conclusions from this chart as we can from the Pirate Ship Chart. The prices really have not changed that much in the measurable time-frame2. The weighted average for all the castles is 10.56 cents per piece. As with the Pirate Ships, there does seem to be a general increase in piece count, however.
Part of TakaraTomy's Movie Advanced Series lineup, Revenge Optimus Prime is redeco of the 2010 Transformers Battle Blades mold, featuring darker plastic, a pair of flip-out swords (the first release of this mold) from the Hasbro release, and chromed fuel tank-guns & sun visors. His shins & wheel joints are bronze from the Hasbro release as opposed to the grey of Takara's Autobot Alliance release.
A late-run extensive redeco of the Super Base Armada Optimus Prime toy, "Powerlinx" Optimus Prime sports the darker color scheme the character takes on in the Armada cartoon episode "Origin" following a Mini-Con power-up, but he is not precisely show-accurate—the deco would later be fine-tuned with more accurate details for release in Japan as the Magna Convoy DX giftset (see below). In addition to now sporting fully-mobile Super Mode arms without the movement-impeding tabs, Prime still comes with all his features and accessories, though for this release, his Mini-Con partner Sparkplug got retooled with a new rear chassis and a blinged-out golden chrome body as "Corona Sparkplug".
This silver-chromed redeco of the Leader-class Optimus Prime figure first saw the light of day as a prize in a TV Magazine mail-in, offered alongside a gold chrome version of the same toy (see above). Both figures were later made available again as prizes in a second contest in the September 2005 issue of TV Magazine, together with "Galaxy Convoy Custom Color Version" (see below). Despite being offered in equal quantities in these contests, this silver version is apparently much harder to come by.

The First Edition Voyagers were never released in the US, forcing buyers to import him from Canada or Japan... at first. ToysЯUs later picked up this toy, along with most of the "First Edition" line, as part of a huge block of US market exclusives for holiday season 2012. This second run introduced a deco variant, in which the red paint on, beside, and below the truck side windows is omitted, revealing the patch of brown plastic underneath. As he is packaged in robot mode, with his front wheels and shoulders covering said patch, the only way to identify which version is which while in the box is by looking at the hinge joints beside his two painted torso lights, with the center portions of the hinges being unpainted brown on the variant. All releases of this mold also have a minor issue with the truck mode windvane/robot mode heels refusing to connect solidly to the truck cab in vehicle mode, leaving a visible gap above Prime's windshield.


Take note that the leg construction (thigh parts with legs consists of rear wheels/fifth wheel hitch & engine compartment/flip out legs combination) can become loose after a long time of play due to being used with transformation. Also, the legs did not seem to securely connect due to the hitch's shallow holes & the front half of the legs' small pegs. Also, attaching weapons with 3mm posts on the Battle Cannons' holes can cause some stress marks.

We may be four days in 2019, but that certainly isn't too late to post a special New Year's message from everyone's favorite yellow Volkswagen Beetle, right? To promote the upcoming Bumblebee Movie premiere in Japan in March (that's right, March!) a New Year's video message from Bee himself has been posted to YouTube and Twitter. What the actual message says we don't know, but we'll update when we do. The message is then followed by a full scene clip (in English with Japanese subtitles) where - Read More


Available with Grimlock, this Optimus Prime is a redeco (or possibly a repaint) of the figure above, featuring extra paint applications on the chest and thighs, and he features a different flame pattern on his side doors. His Autobot insignia is now tampographed on his right arm. The cyberglyphs on his front hood is confusingly translated as "PRIME". The 2-pack also comes with a card, which the glyphs being decoded as "DINOBOTS". Optimus Prime and Grimlock also saw release as a Toys"R"Us Japan exclusive, making this Optimus Prime redeco/slight retool to be first sold at Japanese markets.
Laser Optimus Prime transforms into a mid-1990s Western Star 4964EX, pulling a grey and black fuel tank trailer. The sides of the trailer are decorated with a sticker depicting Prime using a flamethrower to burn down a banner with the words "Optimus Prime Octane" on it. The truck is armed with a disc launcher on the roof of its trailer, which launches five blue discs bearing the Generation 2 Autobot insignia as a knob is turned. Like the other "Laser" toys released this year, Prime features electronics powered by two button-cell batteries; in truck mode, pressing the button on the cab's roof causes his headlight to light up with yellow LEDs.
The Optimus Prime Battle Rig Blaster transforms from a superdeformed amalgamation of his Movie truck and G1 Optimus Prime's truck (indeed pulling G1 Prime's trailer) to a fully G1 robotic forearm and hand with a built in Nerf style gun. By simply placing your hand inside the back of the trailer (I need an adult!) and pulling back on the front of the truck, the gun transforms and folds back into a weapon. It comes with three Nerf N-Strike size whistle darts which can be stored inside the trailer. Although not shown in the image, the truck front splits in half in gun-mode, while the grille acts as a sight. This toy was marketed as 'Optimus Prime Big Rig Blaster' overseas.
Take one part bicycle, two pages out of the Flintstones automobile design book and one hard-spoiled child and you have a pedal car. It seems like a really fun idea in theory but, in actuality, the single-speed gearing of a bike mixed with the weight of the metal shell, seats and wheels meant operation of the thing bordered on child labor. Still, the pedal car remained very sought after for generations to come.
Transformers: Energon introduced several new concepts to the toy line. Two new sub-groups, the Omnicons and Terrorcons, joined the fray, representing smaller factions of the Autobots and Decepticons respectively. The smaller toys in these sub-groups came with Energon weapons that could be used by the larger Autobots and Decepticons, along with Energon chips that could be fastened to the larger figures to enhance their power. Energon weapons and chips came in a variety of colors of translucent plastic. Many Autobot figures in the line were able to combine with a partner to form a larger robot through the "Powerlinx" process. The Decepticons were designed instead with alternative "attack modes". While no longer the focus of the line, there were several Mini-Con releases in Energon as well.
By the ‘90s, the genre had begun to fade, and boys' minds turned to more high-impact action, often centered around mutants, monsters, and karate. Hasbro saw potential in the embers of the Transformers brand, and turned it over to newly-acquired subsidiary Kenner for a jump-start. Kenner threw out all the old rules, and invented a line of Transformers that were more poseable, more feature-packed, and more exciting. Backed by a high-tech CGI cartoon, Beast Wars turned the brand around, making Transformers a bestseller again.
Optimus later led a convoy in search for a building site for Autobot City, which ran into a Decepticon ambush. Rodimus Prime remembers the Transformers greatest battle on Earth. He sent off several Autobots to get help, knowing this was the only chance of victory. Transformers Combat Data Those several Autobots were seen again, but Prime... wasn't.
In "The Elite Guard", the Autobot Elite Guard, composed of Ultra Magnus, Jazz, and Sentinel Prime, arrive on Earth to reclaim the Allspark. They don't believe Optimus' story about the Decepticons and Sentinel Prime wishes to have him court-martialled. When a fragment of the Allspark causes a production line to go haywire, Optimus finally stands up to Sentinel, retrieving the fragment, and earning praise from Ultra Magnus.
Optimus Exprime's electronics are slightly less complex than those of Kenzan and Gekisoumaru. In robot, dragon, and train modes, pressing a button sets off red flashing LEDs and causes him to play one of seven sounds or phrases (which do not change depending on the mode). Pressing and holding the button activates a combination mode similar to the ones found in Kenzan and Gekisoumaru. Optimus Exprime calls on Kenzan and Gekisoumaru to combine with him, and then combination music plays as the LEDs flash blue, purple, and red (with the two halves of his Autobot insignia showing different colors!). Completing either combination by snapping the correct kabuto helmet into place ends the combination mode and triggers another phrase.
I have to disagree. Look at our planet. Jagged and rigid is an aspect of primitive technology. Smooth, compact, and protected is an aspect of futuristic technology. Transformers should look more advanced than what we hsve, nor technologically regressive. They have better scientists and millennia of knowledge compared to us. Smooth designs like Knight's are the only ones that make realistic sense in that context of technological progression, even as a life form.
A limited edition of the Optimus Prime toy sold as a mail-away exclusive by PepsiCo was made available in North America in 1985. This version of the figure came with a small fold-out leaflet glued to the top-right of the packaging, which contained two Pepsi logo stickers for the buyer to attach to Prime, mid-way through the traditional silver-and-blue stripe on his trailer. Canada also got a version of this promotional figure, but with much larger stickers that were the full length and height of the trailer. This promotion would go on to serve as the inspiration for the Japanese character of Pepsi Convoy, who would in turn be released by Hasbro as a new "Pepsi Optimus Prime" in 2007.
×