A (technically) unreleased "black" redeco of Henkei Voyager-sized Convoy using the same plastic layout and paint mask but replacing red and blue with black, silver with gray, leaving the previously vacuum-metalized grill/fender area unpainted, changing the blue tint for the windows to red and changing all silver and yellow paint operations to blue. The red Autobot insignias would have remained unchanged.
Honestly, all the charts were done in Excel. I tried other methods but that was the easiest since all my data was in excel already. They are X,Y Scatter plots with sooth lines – heavily tweaked. Made the lines thicker which makes it look smoother and changed the layout a bit to make it clearer. The Excel defaults are ugly but if you spend enough time tweaking them you can get something passable.
A Supreme sized version of Optimus Prime, based on the Voyager class figure design. When pushed forward, the upper torso spins and transforms, with the transformation sound indicating the completion of the process. The right arm has an axe-swinging action while the left arm has a punching action. Includes show-accurate battle axe that features retractable blades and a spinning jet flame. Also features sound effects and pre-recorded dialogue ("My name is Optimus Prime!", "Let's go!" and "Bring it on!"), as voiced by David Kaye.
Separate from the retreading and cartoon accuracy and backpack stuff one persons comment hit home for me as to why I will buy this new Optimus. It likely has the hyper articulation that they did in Sunstreaker and Megatron. So I will buy it for that to match Megatron. Let’s face it. mP-10 has a lot of nice things but even when it first came out I thought it had gorilla arms compared to mp-01.
The TakaraTomy version, part of the seventh wave of Japanese Prime toys, is dubbed Arms Master Optimus, uses darker, metallic plastics, casts the backs of his thighs in metallic red, replaces his metallic silver paint with glossy gray, and replaces a few of his paint operations with customer-applied foil stickers, such as his insignias, shins, headlamps, the tiny yellow lights on his torso, and the blue deco on his truck panel sides. He has also been retooled with additional 5mm pegs for his thighs, roof, and lower backpack, as well as ports for his forearms, shoulders, smokestacks, fuel tanks, and roof. Instead of the rifle, he comes with a very large Matrix which can tab onto his chest as armor or mount onto the back of the truck cab, with the Matrix also being covered in 5mm posts and holes so that Arms Microns can be attached to it. He additionally comes with a clear-blue "Shining" version of the Arms Micron, R.A., who can combine with the Matrix to form the colossal Matrix Saber.
Featuring a complex transformation, the front and back ends of the truck essentially fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The halves of the rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his price point, he has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, as it is held in place by a simple clip.) Optimus's final Automorph, located in his torso, is activated by flipping the silver lever on his stomach, activating a series of spring-loaded actions where the truck windows are pushed apart and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point, yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
In an alternate version of this reality, Rodimus was forced to deal with a militant and aggressive Optimus Prime, and Cybertron was soon wracked by a three-way war between Optimus' Autobots, Rodimus' Omnicons, and Megatron's Decepticons. Unfortunately, the balance of the conflict tipped with the arrival of dimension-hopping tyrant Megazarak, whose Destructicons allied with the Decepticons, creating a force that soon annihilated Autobot and Omnicon alike. However, the Destructicons then turned upon their allies and destroyed them before being abducted by Unicron. This universe was then drained of all life and energy by Tornedron, whose creator Primacron was also destroyed.
As one of the first Transform Jr toys, this version of Optimus Prime was released under the early name for the series, Transform Gōkin. As a smaller, simplified version of the original Generation 1 Prime figure intended as a low-cost alternative for younger children, Prime features a similar transformation, with a removable head in addition to fists, but lacks rubber tires and translucent windows. As with most other Transform Jr figures, he lacked any of his major accessories, coming only with his rifle and a cardboard replacement for his trailer that had to be assembled by the buyer.
The new One-Step Optimus Prime toy transforms from a trailer truck into a robot in just one easy step! The toy features a similar transformation to the other One-Step Optimus Prime and One-Step Changer Movie Hound. The figure is only available as a "Special Edition Figure" in a 6-pack with the One-Step figures of Bumblebee, Steeljaw, Grimlock, Sideswipe, and Underbite, all of which are unchanged from their individual releases. This set was exclusive to Target stores in the United States and to Toys"R"Us stores in Canada.
The Transformers toyline was created from toy molds mostly produced by Japanese company Takara in the toylines Car-Robots (Diaclone) and Micro Change (Microman). Other toy molds from other companies such as Bandai were used as well. In 1984, Hasbro bought the distribution rights to the molds and rebranded them as the Transformers for distribution in North America. They approached Marvel Comics to create a backstory with names and short descriptions for each character, most of which were written by Bob Budiansky.
Surely one of the strangest examples of licensed Transformers products, Sports Label Convoy transforms into a shoe. Something of a shellformer, this baffling incarnation of Prime is colored primarily white and red in his alt mode of a realistic-looking (if notably undersized) Nike Free 7.0 sneaker, complete with gratuitously long real fabric shoelaces. In robot mode, he is made instantly recognizable by his incorporation of some additional blue and silver in predictable areas, and a traditionally Prime-styled head. Less traditionally, and somewhat perversely, Prime's feet are sculpted in the likeness of his own sneaker mode, making it seem like he's wearing himself!
If instead of all heading into the lab together, the Autobots had sent in Bumblebee alone, and Bumblebee subsequently managed to escape with the antidote to the Decepticons’ poison, the Autobots escaped from the Valley of Poison and returned to Autobot headquarters. Once the other Autobots were cured, they all drank a toast to Bumblebee, to celebrate his part in the mission Decepticon Poison
Armada Built to Rule Optimus Prime transforms into a fair approximation of his vehicle mode, but the robot mode is quite inaccurate, due to the very broad, flat Trans-Skeleton with thin, stick-like limbs attached to it. The set came with a very simplistic "Mini-Con" Sparkplug partner kit that did have a more dedicated "Powerlinx" connector than the standard construction pegs, though these are a bit too thin to be used as attachment points for regular Mini-Cons (they stay, sort of, but it's a very loose connection). The 101-piece set also features pressure-launch missile-firing "smokestack" cannons.
Released in the latter stages of the Cybertron toyline, this redeco of the Leader-class Optimus Prime figure introduced a new colour scheme that several other tail-end releases would emulate. Taking its name from the Japanese version of Cybertron and with a bio noting that this new body depicts Prime after he embarks on his galaxy-spanning mission at the end of the Cybertron cartoon, "Galaxy Force" Optimus Prime replaces the original toy's blue parts with black and the translucent blue with smokey clear, and moulds several—but not all—grey parts out of red plastic, including the toy's rifles, rail gun covers, missile launchers, and Super Mode leg guns. In the realm of new paint operations, Prime now sports all four Cyber Planet Key symbols on his shoulders, and his unique Matrix-shaped Cyber Key (now with the code lo9x) finally has a gold-painted border, as it had always had in Japan. Additionally, Prime's hip joints were tightened up with this release, making it easier to stand him up in Super Mode.
Cosmos warned Optimus about a fuel plant the Decepticons were building, so Optimus took the Dinobots in his trailer and, under the guise of having a delivery for Shockwave, invaded the construction site and defeated the Decepticons. After this victory, Optimus turned his gaze skywards, and thanked Cosmos for his contribution to the Autobot cause. The Autobot Spy in the Sky
When Sideswipe was accused and convicted of destroying the Nova Suspension Bridge, Optimus was infuriated that one of his own Autobots could commit such a heinous act. Optimus was tasked to hunt down and deactivate Sideswipe, though the task proved to be easy as Sideswipe did not run, hide or resist. After Optimus had deactivated Sideswipe, he was approached by Prowl, who pointed out that Sideswipe's actions made little sense, as he had committed the crime in broad daylight before many witnesses. Agreeing that the Decepticons might be behind the situation, Optimus allowed Prowl to take a team of Autobots to Carob Island to clear Sideswipe's name while Optimus and Jazz stayed behind to continue working on human/Autobot relations. Prowl returned with evidence that it was indeed a Decepticon-controlled clone of Sideswipe that had committed the crime. Optimus then presumably reactivated Sideswipe when his name was cleared. Deadly Paradise
Optimus Prime also appears in Transformers: Rescue Bots, stated to take place in the same universe as Prime, as the leader of the Autobots who transforms into a semi-trailer truck, though unlike his Prime appearance, it's flatnosed like his G1 counterpart. He gave the Rescue Bots their mission and mainly appears mainly via view-screen, appearing physically in the first episode and then in the first-season finale, where his truck mode is seen for the first time on screen. He then returns, with or without Bumblebee, many times throughout the second and third seasons as a recurring character. In the episode "Land Before Prime," Optimus Prime arrives on Wayward Island to help the Rescue Bots. He scans Trex as a secondary form where gains a Tyrannosaurus form, making him a Triple Changer, though he states that scanning anything techno-organic might have unpredictable results. While he loses control of this "Primal Mode" at first, the Rescue Bots determine that his loss of control is due to low Energon reserves, and are able to replenish his energies and restore him to normal using an energon patch. At the conclusion of the third season, Optimus helps his old friend, High Tide, along with the new recruits, Blurr and Salvage, save Griffin Rock and subsequently sends Heatwave and his team on a new mission to use the island as "testing place" to reveal their true identities as aliens.
Optimus Prime can also combine with Leader-class Jetfire to form Jetpower Optimus Prime by slightly transforming his backpack and feet. Sadly, this takes away from his leg articulation, because otherwise he could never support the massive backpack he has in this mode. However, fans have created alternate configurations that increase leg articulation and movie-accuracy.
The line was released as "The Transformers" in the United States, Canada and the UK in 1984 (One year after the Gobots) but Takara was still marketing Diaclone at least during 1984. Hence in Japan "The Transformers" did not debut under that brand till 1985, when the line was also rolled out to the majority of the rest of the world between Takara and Hasbro. Hasbro Europe still will not accept, however, that the range was released in the UK in 1984, not even with evidence such as Argos 1984 catalogues containing the range, the UK comic launching in September 1984 or even the 1984 Transformers product catalogue produced by "Hasbro Industries (UK) Ltd, Wokingham". It is thought that Hasbro Europe as it now stands did not come into existence till 1985, hence no records of Transformers sales in 1984. UK Transformers toys were sold in boxes identical to those of their American counterparts until around 1998/9 when the range started to have UK exclusives.
Take note that the leg construction (thigh parts with legs consists of rear wheels/fifth wheel hitch & engine compartment/flip out legs combination) can become loose after a long time of play due to being used with transformation. Also, the legs did not seem to securely connect due to the hitch's shallow holes & the front half of the legs' small pegs. Also, attaching weapons with 3mm posts on the Battle Cannons' holes can cause some stress marks.
Thanks to Hasbro on their official site, which can be accessed by clicking any of the images below, we have news of 2 new members of the Energon Igniters class of figures, along with new images of 3 more! Up first, we have the 2 new reveals: Power Plus Soundwave and Ironhide! Soundwave looks a lot like he did in the movie, with a G1-esque robot mode, and a new van mode that is very Animated-esque, complete with a totally metal image of a jaguar and bird of prey on the side, evoking - Read More
Part of the seventh wave of Robots in Disguise Warrior class lineup, and the first of the Mini-Con Weaponizers subline, Power Surge Optimus Prime is a retool of the original Warrior Class Optimus Prime figure, now transforming into a 6-wheeled futuristic trailer truck. Optimus now also comes with a pair of swords, which can be attached to his 5mm-compatible hands or the top of the truck/back port to serve as the robot's wings. Most notably, Power Surge Optimus Prime features retooled truck hood/shoulder parts to makes the hands more evident. As a retool of the original Warrior Class Optimus Prime toy, he retains his axe accessory, albeit unpainted just like the Clash of the Transformers Warrior Class toy's. His light blue-colored Launcher can be attached onto his collar.
This Optimus Prime is a new mold that matches the character's more cartoony and simplified appearance in the Q-Transformers: Mystery of Convoy Returns cartoon. The "Watashi ni ii kangae ga aru" added to his name means "I have a good idea" (私にいい考えがある). A line originally spoken by G1 Optimus Prime at various times in the Japanese dub of the original cartoon, it has a reputation as a catchphrase of his among Japanese fans and has been reused by many Optimus Primes since, including the Prime in the Q-Transformers cartoon.
Like all Predacons Rising releases, the Optimus Prime/Predaking two-pack was exclusive to Target stores in the United States and Canada and to Tesco stores in the UK, and is also supposed to be exclusive to Carrefour elsewhere in Europe (presumably in France and/or Spain, though there have been no sightings as of yet). It has also been found at Rossmann drug stores in Germany and Ripley stores in Chile and popped up at BigW stores in Australia much later, in mid-2014. Also, like all Predacons Rising multi-pack redecos of Beast Hunters Cyberverse figures, the Cyberverse logo is nowhere to be found on the packaging.
A BotCon 2012 exclusive purple redeco of the Deluxe "Generation 2" Optimus Prime figure from the Generations toy line, with the sword's blade molded in clear yellow. Much like the 2008 Voyager figure, this figure has painted-in "battle damage" effects. The right side of the hood has the words, "I shall stand...", while the left side says, "The rest shall fall."
A Walmart exclusive set featuring a redeco of the first Cyberverse Commander Optimus Prime figure, featuring moderately brighter colors and paint, while his jetpack and rifles are now black, with the jetpack's wings having silver flames. He also lacks the flame pattern on top of his hood, and features different flame patterns on the sides of the hood.
Unlike the other Swordbot toys, Optimus Exprime's kabuto helmets form an integral part of one of his alternate modes. The kabuto helmet designed for use with his DaiGekisou combination forms the head of his dragon form, while the kabuto helmet designed for use with his DaiKenzan combination forms the "tail" of the same. He comes with two HUGE swords (with 5mm handles) which can be attached to several places on his kabuto helmets or either alternate form, held separately in his hands, or held both in the same hand (with one held in reverse-grip).
According to the bio printed in the Transformers Collectors Club magazine, Optimus Prime was a member of the Cybertron Dimensional Patrol, but was abducted by Unicron. It is unknown whether he repainted himself yellow before being abducted or if the recoloration was due to the radiation emanating from Unicron, which has a tendency to recolor Cybertronians.
So as a MOC builder, I have found that I tend to design MOCs on LDD and acquire parts as needed for each MOC from bricklink. I now tend to pass on licensed themes. I am especially turned off by the rehashing of many of the Star Wars vehicles. Sets that I buy tend to be Creator sets for my kids or the occasional “special edition” set that appeals to me such as the Sopwith Camel set.
"Cybertron Optimus Prime" new features a darker grey plastic, and mostly shares the same paint mask to the original Deluxe class figure, with added paint details on his head and the mesh-like pattern on the front of his "entry" mode. The silver paint on his chest was slightly changed from the original and he lacks the paint on his feet, his "headlights", and the top of his "entry" mode. Lastly, he features Cyberglyphics on his vehicle mode windows, and the rear sides of the vehicle. His flame attachment is now cast in translucent red plastic with orange sprays.
Through the years, there have been many action figures made in the likeness of the original incarnation of Optimus Prime, some of which have been featured in fiction, others of which have not. Additionally, some toy makers have made unlicensed toys in his image or accessories for the existing toys. The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno. The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the Transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original Transformers toy line.
Alerted by Bumblebee of Megatron's latest plan, Optimus Prime led the mission on Wheeljack's ship to foil them. He sent Bumblebee on an underwater scouting mission, and took part in a pitched battle that ended in the Decepticon's being defeated. Search for Treasure Under the Sea When Rumble dropped rocks on the Autobots, Optimus used Roller to eliminate most of them. Unfortunately he was forced to surrender when he saw the other Autobots had been captured by the Decepticons, and was placed in a special Autobot prison. Luckily Bumblebee remained free, and after he'd rescued the others, Optimus wrapped Megatron up with an iron bar. Bumblebee to the Rescue!
Released as part of the Target-exclusive Reveal The Shield subline, this Tiny Turbo Changer 3-pack contains a redecoed Optimus Prime and Bumblebee (in their first non-blindpacked release) and a new Steelbane figure. This version of Optimus features red wheels & Tech Spec-esque patterns on his robot mode chest and... groin-flaps, though the real decoding is on his vehicle mode roof, which when seen through the attached clear-red weapons (or similar plastic device) reveals... an Autobot symbol. Surprise.
Get ready to turn heads with TRANSFORMERS MIGHTY MUGGS Figures. Call it a moodswing, or call it a moodSPIN, these TRANSFORMERS MIGHTY MUGGS figures feature a push-and-turn mechanism that lets fans change the figure’s facial expression by pushing down on the head. With 3 different expressions and classic character designs, these figures will have fans doing a triple take. Characters include BUMBLEBEE, OPTIMUS PRIME, MEGATRON and more. Each sold separately. Available at most major retailers and on HasbroToyShop.com.
I have to disagree. Look at our planet. Jagged and rigid is an aspect of primitive technology. Smooth, compact, and protected is an aspect of futuristic technology. Transformers should look more advanced than what we hsve, nor technologically regressive. They have better scientists and millennia of knowledge compared to us. Smooth designs like Knight's are the only ones that make realistic sense in that context of technological progression, even as a life form.
A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
LEGO® sets are not cheap toys. They are made to the highest standards and have the price to go along with it. However, in the past couple decades it seems that the price of LEGO sets has become outrageous. New sets can sell for up to $500 retail and old sets can sell for twice that in a secondary market. This is a children’s toy, right? There is no way LEGO sets have always been this expensive; it is just molded plastic. Let’s take a look at the history of LEGO pricing and try to figure out what is going on.
© Andrew Sielen and Reality Prose, 2013. Unauthorized use and/or duplication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Andrew Sielen and Reality Prose with appropriate and specific direction to the original content.
This Classics Optimus Prime is a smaller, deluxe-class toy bearing a greater resemblance to the original G1 toy. He was only available in a special Versus pack with a similarly unique Classics Megatron toy and later the FAB version of the 2007 movie Prime. Later releases of this toy had him individually packed in some European countries. His vehicle mode and robot mode is based upon the original toy, but due to limitations in design, budget and gimmick, does not succeed very well. His thighs cannot collapse into his lower legs, meaning they are exposed in vehicle mode, as is his head. Although to be fair, you wouldn't really notice the leg thing if he had a trailer. But, he is greatly articulated.
Available exclusively from Japanese clothing company A Bathing Ape in July 2011, concurrently with a range of exclusive Transformers t-shirts, "Convoy Reissue BAPE Ver." (コンボイ復刻版 BAPE® Ver.) is a redeco of the original Optimus Prime toy sporting a unique new green color scheme, along with a tan trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese Optimus Prime packaging.