Alternators Optimus Prime transforms into an accurate, fully-licensed 1:24th scale Dodge Ram SRT-10. The vehicle mode features rubber tires, functional steering, opening hood, tail gate and doors with a detailed cabin interior. His robot mode body sculpt details are based upon the 20th Anniversary Optimus Prime toy. However, his headsculpt is based upon Powermaster Optimus Prime. He is armed with a small pistol that is formed from his engine.
On the day before the Transformers GT began, GT-R Prime found himself racing with GT-R Saber when they were both out for a test run. Though Misaki warned him not to get too invested in a practice race, Prime took the challenge seriously and won the race by briefly transforming into robot mode, thus tricking Saber into slowing down in anticipation of a fight. Test Run Battle! –Prelude– Prime earned the pole position for the Transformers GT, but this combined with his victory over Saber made him overconfident, and he was unprepared when Saber attacked him immediately as the race began and sent him flying. First Fast Attack! –Whoever Strikes First Wins– GT-R Megatron also targeted Prime during the course of the race, seeing him as his fated rival. One Shot and One Kill!! –Finishing Blow–
If Sparkplug suggested that the Autobots not worry about subtlety, the entire squad transformed and began prowling the streets in search of Decepticons. Oblivious to the panic they were causing, Optimus assumed that the Decepticons were spotted nearby when a police officer declared that the city was under siege by giant robots. Unable to restore order in time to halt the Decepticons’ plot, Optimus and the rest of his team were destroyed in the ensuing earthquake.

Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[38] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[39]
Optimus Prime was one of only two Armada-theme figures in the otherwise Generation 1-centric Q-Robo Collection line of super deformed PVC figurines, the other being Armada Megatron. Like all the figures in the series, Prime featured articulation in the neck and shoulders, and was also available in a translucent colored plastic: as an Autobot, Optimus came in translucent red, but was also uniquely available in a golden metallic "pewter" variant as the wave's solitary rare chase figure. All Q-Robo figures were sold in sets of two, one full-color figure and one translucent one, blindpacked in a plastic capsule.
Legion Class Optimus Prime has been found at Family Dollar and Dollar General stores in the United States. A later variant repleaced the red Autobot insignia with a black version. This later version was also released at general retail in Australia, New Zealand, Europe, and Russia. In Singapore it was released together with Bumblebee and Starscream as part of the promotion for Age of Extinction in selected cinemas.
Entertainment Pack Optimus Prime is a slight redeco of the SDCC figure, with some deco differences between the SDCC release; this version has gray windows instead of blue and is missing some of the silver deco on the helmet and roof/feet, as well as the yellow paint on his lights. His midriff is also darker. Optimus also comes with a similarly-scaled Megatron and PVC figurines of Jack Darby, Miko Nakadai, and Raf Esquivel.
An extremely simplified version of Optimus Prime, this McDonald's Happy Meal toy transforms into a trailer-less truck cab. He is formed out of a large percentage of translucent plastic, and can combine with the other Happy Meal Armada toys (Hot Shot, Red Alert, and Smokescreen) into a human (well, robot) pyramid-style configuration, notionally considered a "Mighty Robot".

"Cybertron Optimus Prime" new features a darker grey plastic, and mostly shares the same paint mask to the original Deluxe class figure, with added paint details on his head and the mesh-like pattern on the front of his "entry" mode. The silver paint on his chest was slightly changed from the original and he lacks the paint on his feet, his "headlights", and the top of his "entry" mode. Lastly, he features Cyberglyphics on his vehicle mode windows, and the rear sides of the vehicle. His flame attachment is now cast in translucent red plastic with orange sprays.
Back in the 60s, Hasbro was commissioned to play down the negative stigma surrounding US soldiers fighting in the Vietnam War. The result was four, 12-inch tall dress-up dolls featuring realistic camouflage fatigues and weapons of the time. The figurines represented the Army, Navy, Air Force and Marines. There was no real storyline at the time which limited the allure of the toys.
A younger version of Prime Optimus Prime is one of the playable Autobot characters in the 2010 video game Transformers: War for Cybertron. In the Autobot campaign, he starts off as Optimus, a warrior who rallies his fellow autobots against the Decepticons following the reported death of their leader Zeta Prime. He succeeds in defending the Autobots' home city of Iacon from Starscream and his forces. Optimus then receives a distress call from Zeta Prime. Knowing that this is most likely a trap set by Megatron, he proceeds anyway with a rescue mission. He lets himself, Bumblebee, and Sideswipe be captured by the Decepticons and is sent to a prison in Kaon, the decepticon capital, in an elaborate scheme to free Zeta Prime and all imprisoned Autobots. He frees all the other prisoners, and defeats Soundwave and his minions Frenzy, Rumble, and Laserbeak, but he is too late to save Zeta Prime. After taking Zeta Prime's body back to the Autobot high council, he is bestowed upon the well earned title of Prime.
Created with the specific purpose of producing an Optimus Prime as accurate to the original animated series as possible, the toy is exceptionally poseable, partially constructed from die-cast metal, features rubber tires and vacuum-metalized plastic and is heavily detailed, with sliding pistons in its joints and working spring-loaded suspension in vehicle mode. The figure also contains multiple non-intrusive gimmicks, such as a moving mouthplate to emulate Prime's traditional method of speech, flip-up communications panels on the forearms depicting images of Bumblebee and Starscream, and an opening, light-up Matrix chamber in the chest, which contains a removable vacuum-metalized Matrix of Leadership that can also be pulled open.
Optimus was eventually revived by the Autobots when they arrived to liberate Master from Decepticon hands. They found allies in the native Cyberdroids—those Optimus loyalists who had fought the Malignus insurgency. Autobots and Cyberdroids liberated the deposed triumvirate of Apex, Hi-Q, and Diac. Hoping to check the power-mad Galvatron and his three Cyberdroid allies, the Autobot leader was revived and binary-bonded himself to three Cyberdroids, including Surge, and Apex, who formed his head. Thus empowered, "Triple-Threat Prime" battled Galvatron and his forces across Master in a series of epic conflicts. The Autobots were unsuccessful and were forced to retreat. A Brush With Infamy–Prologue
If Optimus led his troops back to the Decepticons’ poison lab, the convoy happened upon the Decepticons hauling barrels of poison out of the poison lab. Windcharger and Ironhide suggested two different plans to Optimus: Windcharger wanted to use his magnetic powers to cause a confusion, while Ironhide wanted to simply go in for a full frontal assault.

Optimus Prime is primarily voiced by Peter Cullen in most of his incarnations, who voiced him in the original series. Following the production of the 2007 film, Cullen reprised his role for the sequels and supporting media and would even voice Optimus in later series such as Transformers: Prime. Optimus has been voiced by a number of other voice actors in other series such as Neil Kaplan, Garry Chalk, and David Kaye in the series Transformers: Robots in Disguise, Unicron Trilogy, and Transformers Animated, respectively.
So as a MOC builder, I have found that I tend to design MOCs on LDD and acquire parts as needed for each MOC from bricklink. I now tend to pass on licensed themes. I am especially turned off by the rehashing of many of the Star Wars vehicles. Sets that I buy tend to be Creator sets for my kids or the occasional “special edition” set that appeals to me such as the Sopwith Camel set.
He and Metroplex were soon rescued by Bumblebee and Ratchet and they promptly escaped back to Earth, just in time to rescue Grimlock from a Decepticon hit squad. After being misled by a phony distress call, Optimus and his team had to face an assault on the Ark. They repelled the Decepticon attack, but Prime decided that the time was right to go to Cybertron and liberate the Autobots whom Shockwave had enslaved. The Autobots again used the space bridge to reach Cybertron, and mounted an assault of their own on the Decepticon fortress. After fighting their way through the defenses, Optimus and Bumblebee faced down Shockwave himself, defeating the Decepticon with some help from Grimlock. Transformers G1: Awakening
In "Human Error" Parts 1 and 2, Soundwave captures the Autobots with the help of his minions, Laserbeak and Ratbat, in order to brainwash them. Part of Soundwave's elaborate scheme consists of tricking the Autobots into thinking they have turned human. Optimus Prime's human form is a male caucasian in his early 20s wearing a red jacket. Sari forms a group of "Substitute Autobots" which consists of Scrapper, Wreck-Gar, and Snarl, to rescue them. They free the Autobots from Soundwave's control and Optimus grabbes Laserbeak to engage in a guitar vs. keytar battle with Soundwave, who used Ratbat. Optimus smashes Soundwave and Ratbat into pieces using Laserbeak in guitar mode, but Laserbeak grabs Soundwave's surviving components and flees.
A Bic Camera and Joshin Kids' Land exclusive, this redeco is the first release of the Prime: First Edition Deluxe class Optimus Prime figure in Japan, featuring a slightly lighter hue of red (the stock photography provided by TakaraTomy, showed Orion Pax's red plastic features more pink than its original toy, this seems to have been a trick of the lighting or a photoshop), and greyish blue plastic. He features several customer-applied foil stickers, including Decepticon insignias of varying sizes. He comes with a gold vac-metal version of the Arms Micron, R.A., as well as the normal blaster-cannon.
Interesting work but I would like to know whether you would find the amount of new sets offered in toto has changed over the survey period. Is there an economy of scale at work? This seems to have two implications: first, the number of units for a particular set may have increased thereby affecting the price of all sets belonging to that class (but doubtful you could find exactly how many Death Star sets were produced in relation to, say, hogwarts castles); second, the popularity of certain set classes may affect what kinds of sets are available. Like with language, we are all confined to use the words we know. And so with Lego, set designers are confined to use what’s economical, unless, of course, the design calls for new styled pieces. These relations are difficult to grasp in statistical analyses, but would seem to play a role in price steering.
A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.[61]
Battle Blades Optimus Prime is a brand new sculpt that attempts to replicate his Leader Class design. He is much more movie accurate than the previous Voyager incarnations. He features two energon swords made of soft plastic, similar to his Leader Class incarnation, albeit not spring-loaded. They can be detached from the mushroom joints they're on, although doing this excessively may cause them to warp.
After the successful Armada toy line, Hasbro/Takara introduced Transformers: Energon. The accompanying television series program was a direct continuation of the events of Transformers: Armada and featured many of the same characters in new forms. This was reflected in the toy line, as characters such as Hot Shot, Jetfire, Optimus Prime and Megatron were all released with entirely new molds.
Optimus Prime was the central figure of Kabaya's final Cybertron candy toy series, Change Galaxy, which was themed around his combinations with Leobreaker and Wing Saber. In addition to being transformable (again, through partial disassembly), this figure of Prime combines with the Change Galaxy versions of his partners, forming Savage Claw Mode and Sonic Wing Mode. Prime himself came packaged with an alternate Super Mode head and his leg armour in order to complete his appearance in each of these forms. Additional Super Mode pieces were not created for this line, as that wasn't the point.
In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.
This Classics Optimus Prime is a smaller, deluxe-class toy bearing a greater resemblance to the original G1 toy. He was only available in a special Versus pack with a similarly unique Classics Megatron toy and later the FAB version of the 2007 movie Prime. Later releases of this toy had him individually packed in some European countries. His vehicle mode and robot mode is based upon the original toy, but due to limitations in design, budget and gimmick, does not succeed very well. His thighs cannot collapse into his lower legs, meaning they are exposed in vehicle mode, as is his head. Although to be fair, you wouldn't really notice the leg thing if he had a trailer. But, he is greatly articulated.
Optimus suffers from a design flaw that many other Voyager Class figures in the Combiner Wars line experience: the detents, or "click points", on the heavily-ratcheted outward motion of his hips (which also form the hips of his torso mode) are few in number and very far apart. As a result, Prime's legs have great difficulty assuming the natural "A-stance" formation that the angled design of his foot sculpt seems to have been meant to accommodate. Likewise, when forming the torso of Ultra Prime, the interactions of the knee-lock mechanism and the hip detents almost always force Ultra Prime's legs into either an awkwardly knock-kneed arrangement or an equally awkward, and often unstable, bow-legged posture (as seen in the image to the right) that prevents Ultra Prime from standing flat-footed. Unlike Motormaster, this version of Optimus was the only one to not receive the improved hip ratchets implemented in its future releases in some shape or form by Hasbro, though they would be used for the Battle Core redeco later in the line. However, there are third party ratchet replacements for the hips.
Prime is armed with a spring-loaded missile launcher that stores on the rear of his truck mode (which becomes the backpack of his robot mode) when not in use. Like most of the weapons of the Energon line, it sports a 5mm post, allowing it to be held by most every Enegon figure, to combine with assorted other weapons and Energon weapons released in the series, and to peg into numerous compatible ports shared by many figures, like the hole in the radar of Prime's own trailer, or even conveniently placed 5mm screw holes like those of the Prime Force.
Commander class figures all come with translucent weaponry, and feature some amount of translucent plastic in their bodies (blue for Autobots, but a variety of colors for Decepticons), a feature designed around interacting with the line's vehicles (see below). Each vehicle is equipped with an "Energon Booster", a light-up accessory that can plug into the Commanders' weapons or into the posts and ports on the figures' backs to illuminate them with "glowing energon power".
In true Prime style, forward portion of the vehicle mode detaches to become Prime himself, while the rear "trailer" transforms into a gun emplacement. In robot mode, the barrel of the truck's left cannon detaches to become a hand-held rifle for Prime, and the figure features an opening chest compartment concealing a removable Matrix of Leadership accessory. Prime's gigantic hands mean that he can't hold it especially neatly, but he can certainly grip hold of it. Atypical of both most Unicron Trilogy figures and indeed, Optimus Primes in general, Prime's hands are not designed to accommodate weapons with 5mm posts, instead featuring a small peg-hole in his palm that allows him to tightly grip objects designed to fit there, like his own rifle, Leobreaker's whip, Cybertron Wing Saber's swords, and Cybertron Metroplex's axe. However Cybertron Wing Saber's sword hilts will also act as adaptors allowing Prime to hold and use 5mm weapons.

Main event time! Nitro figures are more like your traditional Generations/Power of the Primes deluxe bots. Standing at 7-inches, they feature increased detail, additional paint applications and all come with a core to unlock additional features. In addition to Barricade, Optimus Prime, and VW Bumblebee (this one’s my favorite of the entire line), the Nitro series will also have a Camaro ‘Bee.
the one the left was a design that i hated from the start. just doesnt look like what a Transformer is supposed be. the one on the right is almost there but not quite. a very welcoming design though. its what Prime should have looked like from the start. To say it is too 80s, well the first film should have taken place in the 80s, not present day. The Transformers are icons of the 80s. You make Cybertron in the future tense all futuristic and alien-ish and whatnot, but on earth you make it in the 80s.

Early versions of this storyline featured Rodimus returning as "Rodimus Primal," a techno-organic Maximal with a form similar to Optimal Optimus'. This concept was discarded in favor of Rodimus working alongside Primal Prime, but was later adapted for a storyline feature in "Ask Vector Prime." In an alternate reality where Starscream had possessed Waspinator and brought a premature end to the Beast Wars, Rodimus Primal led the Wreckers as one of several resistance group's to Megatron's rule over Cybertron. Eventually, Megatron was overthrown by his rebellious generals Obsidian and Tankor, splintering the Vehicon force prior to the pair being abducted by Unicron. Without Obsidian's leadership, the Vehicons crumbled, and Rodimus Primal became part of a new Cybertronian ruling council that also included "Waspscream," Magmatron, and Mutant leader Icebird.
After the Great War, Optimus Prime disappeared with other legends into the mysterious location on Cybertron dubbed J'nwan, where Optimus himself became the "Authority" who spoke on behalf of the others. Sandstorm, the leader of a rebellion in a 32nd-century firmly under the heel of the tyrannical Shokaract, entered J'nwan to plead with the heroes of Cybertron's past for aid. He hoped to convince them to join the fight against the Predacon warlord. After a mind-crushing journey which left all of his companions dead or deranged, Sandstorm finally found an audience with the Authority and his brethren, but they declined to help, with the Authority stating that their time was past and the war was no longer their war. The Authority then in some way manipulated Sandstorm's trip out of J'nwan such that it was comparatively short and simple. Paradox
Surprisingly, this was also the first Hasbro exclusive transforming Movie Optimus Prime figure to be based on the final design seen in Age of Extinction. He even features the forearms that Prime had before obtaining the Sword of Judgement, which unfortunately means that he is inaccurate to his appearance in the battle of Hong Kong and the entirety of The Last Knight. The sword's blade is still painted as the heated-up version from the concept art.
Based on the Classics toy line, the Timelines 2007 story is set 15 years after the end of the Marvel Comics story (ignoring all events of the Marvel UK and Generation 2 comics). According to exclusive bio information in the Transformers Collectors' Club magazine #15, Hot Rod followed Optimus Prime back to Cybertron from the Planet Klo. Once back, Hot Rod took up racing, but after a while found it pointless. Optimus Prime assigned to help organize the millions of Cybertronian refugees who returned to their home world. Hot Rod chaired the Cybertron Grand Challenge race, a race which featyred combined Autobot/Decepticon teams. With his maturing Hot Rod changed his name to Rodimus and was chosen to return with Optimus Prime to Earth to stop Megatron. Optimus Prime returned to Earth commanding Bumblebee, Cliffjumper, Grimlock, Jetfire, Mirage and Rodimus. When the Cybertronians Skyfall and Landquake arrive on Earth unexpectedly, Megatron attempts to destroy them, but Optimus Prime and his Autobots are able to drive Megatron away. Rodimus is wounded on a mission with Optimus Prime, before being brought back to the Autobot base.

Following a battle which left him grievously wounded, Optimus Prime's entire structural integrity and circuitry processors were reprogrammed into a sleeker, stronger, combat-ready configuration. With a new giant laser-targeting rocket launcher, ripple-fire missile blaster and armor-piercing discs, Optimus was ready to immobilize Megatron once and for all.

A redeco of of the Cyber Commander toy above, this Prime features grey plastic replacing the original blue, some deco differences on the arms, body & legs. He also features a flame tampograph on the sides of his vehicle front. He comes in an altered packaging that replaces the first version's painted prototype stock photos with CG renders depicting the new deco, and also features a new Hasbro product code number, thus making him officially a separate product rather than a drastic running change variant.
A younger version of Prime Optimus Prime is one of the playable Autobot characters in the 2010 video game Transformers: War for Cybertron. In the Autobot campaign, he starts off as Optimus, a warrior who rallies his fellow autobots against the Decepticons following the reported death of their leader Zeta Prime. He succeeds in defending the Autobots' home city of Iacon from Starscream and his forces. Optimus then receives a distress call from Zeta Prime. Knowing that this is most likely a trap set by Megatron, he proceeds anyway with a rescue mission. He lets himself, Bumblebee, and Sideswipe be captured by the Decepticons and is sent to a prison in Kaon, the decepticon capital, in an elaborate scheme to free Zeta Prime and all imprisoned Autobots. He frees all the other prisoners, and defeats Soundwave and his minions Frenzy, Rumble, and Laserbeak, but he is too late to save Zeta Prime. After taking Zeta Prime's body back to the Autobot high council, he is bestowed upon the well earned title of Prime.
Great read. I have noticed an absolute drop in quality myself. My sets in my youth range from 83 to 90. My sons are from 2011 and there is a clear distinction. Aside from the weight of identical bricks being different, the older bricks stay together in a much more durable way than the new bricks. To test this, I created the same models using all old bricks and all new bricks and the difference was marked. I understand doing certain things to reduce costs, but not at the expense of quality…
We know that despite starting his fictional life as a lovable, horn-headed robot who could turn into a Volkswagen in Generation 1, Bumblebee's most well-known these days as a round-headed robot who turns into a Camaro. In fact, younger viewers might not even realize he was ever anything but the Chevy muscle car. But there’s one quirky continuity where he’s able to switch between original and movie modes at will.

This series introduced the dangerous Predacon faction, robotic dragons and mythical creatures that posed a threat to Autobot and Decepticon alike. In response, the 'Bots and 'Cons don new armor (the Autobots in spiky, over-weaponized armor reminiscent of Mad Max, while the Decepticons take on more beastly traits) and are armed with new gimmick-laden launching/spinning weapons. On-package bios were reduced in length to just a sentence or two, and the instruction sheets instead feature facts about one of the figure's main weapons, as well as a chapter of the Tales of the Beast Hunters prose story.


The earliest releases of Energon Optimus Prime have no ridges on the inside of the chest windows and a different head sculpt featuring an Optimus Primal-style mouth-slit in Prime's mouthplate. This was soon replaced with a full mouthplate, and it was this version of the toy which appeared in the Energon cartoon and was released by Takara. Other changes made to Takara's version of the toy involved a chromed front grill, more vibrant plastic colors on Digger-3 and Submarine-4, a darker blue plastic on Prime himself, and more intricate paint operations. Takara's release lacks the electronic sound effects seen in Hasbro's version, which were commonly gutted for the Japanese releases of any Autobot toys who had them, though Prime retains his light-up chest.
Through the years, there have been many action figures made in the likeness of the original incarnation of Optimus Prime, some of which have been featured in fiction, others of which have not. Additionally, some toy makers have made unlicensed toys in his image or accessories for the existing toys. The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[23] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the Transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original Transformers toy line.

This Japanese series, told through radio plays using the Transformers: Alternators Optimus Prime toy mold, branches off from the original animated series. It is set in a different universe than both the original G1 and Binaltech continuities. Set in the year 2006, one year after Prime's death in The Transformers: The Movie and four years before the third season, it sees Prime's corpse covertly transported to Japan by the Earth Defense Command, a government organization. The convoy transporting his body was attacked by a group of female commandos, led by Marissa Faireborn, who had known Prime years ago as a child. Believing they had secured Prime's body, the commandos were taken by surprise by EDC "Kiss Player" operative Ringo and her Autrooper mechanoid partner, who killed them all except Marissa. Marissa went to Prime's body just as an Autrooper began to fuse with it and, reflecting on her childhood memories of Prime, she gave his faceplate a final kiss. This initiated a transformation where Marissa and Prime were fused together and Prime was reborn with a new body, capable of transforming into a Dodge Ram SRT-10.


This reissue of the original Generation 1 Optimus Prime figure comes in a two-pack with the Deluxe-Class Dark of the Moon Optimus Prime figure. Prime himself is almost identical to the Encore release, save for his trailer hitch which was retooled to allow a peg to be inserted within it while still being able to be inserted into the trailer itself (making it compatible with his G1 trailer and the new trailer included). Like the Encore release, he features lighter colors and tampographed shoulder symbols (which vary slightly from the Encore release).
Super class Energon Optimus Prime transforms into a Cybertronic short-nosed truck cab. A switch on his back offers four selectable sound effects, each one corresponding to one member of the Prime Force, the four drone vehicles contained within Prime's parallelogram-shaped trailer. A tiny, slightly recessed button above the switch activates the sounds. When Prime transforms to robot mode, the trailer stands upright to become a launch base of sorts for the Prime Force, with three of the trailer's four storage compartments featuring launching mechanisms that propel the vehicles into action. The Prime Force consists of Fire-1, a fire truck with an extending ladder and rotating turret; Copter-2, a helicopter with spinning rotors; Digger-3, a drill tank with a gear-wheel-activated spinning drill; and Submarine-4, a submarine with opening capture claws beneath its bow. The four interchangeable drones can combine with Prime to create his Super Mode; any drone is capable of forming any limb. When in Super Mode, Prime's chest panels are opened, in turn pressing a button on his side that creates more electronic sounds and lights up a red LED in his chest, representing the Spark of Combination.
He resembles previous Optimus characters in robot mode: his angular chest windows are reminiscent of Cybertron Optimus Prime, while his near-animalistic limbs and color scheme are evocative of Beast Wars Optimus Primal. He has excellent articulation due to his many ball joints, and is armed with a rifle. The flame attachment can fit onto the end of the (non-firing) gun barrel.
This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.

A figure of Prime combined with Jetfire was released as part of the second Big Transformers wave, which came with no accessories of its own, but could hold any of the weapons released with the other second wave figures, including Jetfire's gun, the Star Saber, the Skyboom, and the Requiem Blaster. As with the first wave figures, he came packaged with Ramune candy.
Universe Optimus Prime is a redeco of the Robots in Disguise Scourge Spy Changer toy. He replaces most of the black plastic with predominantly red and blue, with silver for detailing, with an overall deco making him resemble the original Optimus Prime. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
A limited edition of the Optimus Prime toy sold as a mail-away exclusive by PepsiCo was made available in North America in 1985. This version of the figure came with a small fold-out leaflet glued to the top-right of the packaging, which contained two Pepsi logo stickers for the buyer to attach to Prime, mid-way through the traditional silver-and-blue stripe on his trailer. Canada also got a version of this promotional figure, but with much larger stickers that were the full length and height of the trailer. This promotion would go on to serve as the inspiration for the Japanese character of Pepsi Convoy, who would in turn be released by Hasbro as a new "Pepsi Optimus Prime" in 2007.
×