These include two large guns, patterned after the new weapons included with the G2 version of the classic Optimus Prime toy, which can be attached to the trailer in a similar fashion to those of Powermaster Prime. Also included are two additional (blue) Prime heads, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger's interpretation of Prime, especially as seen on the cover of the first issue, one pristine and the other battle-damaged.
The "robot mode" of Optimus Prime is where the pullback motor and working wheels of the toys lie. Optimus is sculpted in blue plastic, pre-posed in an odd crouching pose with zero points of articulation. His right knee is bent back, with his right arm touching his knee, while the left side has the leg forward and the left hand holding onto his butt. The toy is as sparsely painted as the truck, with light blue eyes and chest windows, gray hands and feet among other parts, and red forearms. Two panels on his back have red flame tongues on them.

This release of Buster Optimus Prime was susceptible to a paint scraping issue on the silver painted slide-out barrel of his blaster. This problem was fixed for the DOTM Re-release by relocating the silver paint app from the barrel to the inside wall of an exposed gas tank that had been previously left as unpainted grey plastic. The black paint app on the barrel was left unchanged.
Throughout the first two seasons, Optimus Prime has led the Autobots to many victories, such as stopping Megatron from controlling the crystal of power, stopping the Dinobots' rebellion by saving Grimlock, defeating Devastator with his detach arm, helping capture Nightbird, rescuing Blaster and Cosmos from the Decepticons on the Moon with the help of Omega Supreme, and helping save Perceptor and the other Transformers from the cosmic rust disease.
Optimus Prime leads Bumblebee, Drift, Kup, Prowl, Ratchet, and Wheeljack in Las Vegas when a Cybertronian ship crashes, containing Galvatron, Cyclonus, Scourge, and an infestation of zombies from another universe. Galvatron attempts to take command of the Autobots and, after fighting them, explains his mission to stop an undead infestation. Wheeljack sets up an energy shield around the city to keep the infestation contained, but it only last for 24 hours. Despite the containment effort, Kup realizes that Bayonet, a Decepticon in Galvatron's command, is not all she seems. She turns out to be the extradimensional vampire Britt.[17]
The 1992 and 1993 European and Canadian releases make up what is often called "Generation 1.5", much to the annoyance of many UK fans. These toys are similar in design to the Generation 2 Transformers, having lightpipe eyes, and pastel colors. The 1993 European figures used the G2 faction symbols which Hasbro UK designed because their licence on the G1 symbols had expired. The 1993 figures were repackaged for European G2 release in 1994, and three subgroup molds got used in the US G2 line.
G1 Convoy comes with two sets of fists, each pair featuring differently-shaped fist holes: one pair with square holes to hold the figure's "Convoy Gun" (as his ion blaster is called), and the other with round 3mm-compatible holes to hold the spring-loaded translucent blue missile launcher (a generic accessory also available with Robotmasters Beast Megatron and Beast Convoy). The fists are swapped out by simply popping them out of the wrist-hinge that holds them in place; the figure also includes an energon-axe that can be inserted into the wrist instead of a fist.
All of the Tiny Titans were sold blindpacked. However: there's a tiny clear window in the back to peek at the item inside, making the task of getting the ones you want easier. Every collectible card included in Tiny Titans has a scannable insignia sticker on it. Scanning the badge unlocks a random amount of Energon "currency" and a randomized bonus power-up item, and can only be scanned once per day. It's honestly quicker and less redundant to say which toys don't have this feature.

He does not come with his Mini-Con partner Over-Run in this release; instead, Optimus Prime and his wave-mate Demolishor debuted a new brand of Cyber Key: retooled from the standard Cybertron style key, this version lacked a sculpted insignia, so that any symbol could be tampographed on to it, and featured a Mini-Con-style Powerlinx socket on the back, allowing it to operate the figure's formerly-Mini-Con-activated "punching" feature without the figure itself having to be retooled.

Take note that the leg construction (thigh parts with legs consists of rear wheels/fifth wheel hitch & engine compartment/flip out legs combination) can become loose after a long time of play due to being used with transformation. Also, the legs did not seem to securely connect due to the hitch's shallow holes & the front half of the legs' small pegs. Also, attaching weapons with 3mm posts on the Battle Cannons' holes can cause some stress marks.
Dark of the Moon Voyager Class Optimus Prime is an all-new mold. He features heatshield details in his sculpting and translucent solar panels on various parts of his body, and huge gas tanks. Optimus himself is differently proportioned, having larger feet and a smaller torso and arms. He also features some faux-kibble/parts: His actual windshield chest is being covered by a sculpted panel featuring his characteristic deformed windshield-chest, and a pair of sculpted tires on his thighs. His pair of optics is designed to have a light-piping gimmick, but it was rendered useless since it was painted in smoke gray on top of the colorless transparent plastic.
Additionally, Star Convoy transforms into a large battle station that interacts with the Micromasters that made up the vast majority of the Transformer toyline at the time. His chest contains a peg that allows Micromaster figures to stand inside it in either robot or base modes, and he comes with a unique Micromaster version of Hot Rod not available on its own. He features storage space in his legs for two spring-loaded figure-launching Micro Trailers, and comes with one of his own, decorated in a unique black and orange color scheme. In this mode, two ramps are connected to the Microcarrier; when the carrier's treads are set rolling, they do not move the base, but instead act as conveyor belts that carry Micromaster figures down the ramps. The Microcarrier also spins a gun turret mounted between the conveyors, on which Micromaster figures can stand. Finally, a special connector packaged with Star Convoy allows the Microcarrier to be connected up to Grandus's base mode, powering his moving elevator.

Hey now, dont lump all geewunners together lol. Im all about g1, and love seeing g1 inspired, yet evolved designs. Such as the bee movie, and the recent toy lines. That said, I do respect others opinions. My son prefers bayverse on most and thats ok. I hate bayverse designs (except barricade and nitro zues in the last movie, badasses) but alot of people grew up on that, and it makes hasbro money, so no reason to hate it all together.


The First Edition Voyagers were never released in the US, forcing buyers to import him from Canada or Japan... at first. ToysЯUs later picked up this toy, along with most of the "First Edition" line, as part of a huge block of US market exclusives for holiday season 2012. This second run introduced a deco variant, in which the red paint on, beside, and below the truck side windows is omitted, revealing the patch of brown plastic underneath. As he is packaged in robot mode, with his front wheels and shoulders covering said patch, the only way to identify which version is which while in the box is by looking at the hinge joints beside his two painted torso lights, with the center portions of the hinges being unpainted brown on the variant. All releases of this mold also have a minor issue with the truck mode windvane/robot mode heels refusing to connect solidly to the truck cab in vehicle mode, leaving a visible gap above Prime's windshield.
Prime appeared again in the fourth crossover called "Black Horizon". When Hawk, who had been afflicted by the Matrix, began getting dire visions of a new threat, Prime journeyed to Earth. He took Hawk and Flint to Tibet to discover the source of the problem, only to encounter Bludgeon once again. Prime battled Bludgeon and only won due to intervention by Hawk. Fighting their way into a secret city beneath the Himalayas, the trio realized the extent of the threat. At stake was the impending destruction of humanity by Unicron and the world being taken over by Cobra-La. Optimus and Hawk were discovered by Bludgeon and a group of Cobra-La troops. Prime defeated Bludgeon, then, with Hawk and Joe Colton, gatecrashed the Cobra-La ceremony to sacrifice Firewall to Unicron. Prime was mobbed by Cobra-La warriors and pinned down by a monstrous insectoid creature. Prime demolished them in time to save Hawk from Golobulus. With Cobra-La arrested by G.I. Joe, Prime made sure his comrades were okay before sitting down to watch TV with Eject and Firewall.

Oh, also, I should add that I would like to see if this trend is the same for specific themes, or just over all themes. Although I would guess that the individual themes would show the same general trend you discuss here, one reason individuals might believe in the “price increase fallacy” might be because of the individual themes they support. But again, I think that if you do this, you will find the themes fit the trend as well. If you are looking to go into the numbers more, this might be an interesting area to investigate.

Optimus Prime is the awe-inspiring leader of the Autobot forces. Selfless and endlessly courageous, he is the complete opposite of his mortal enemy Megatron. Originally a mere civilian known as Orion Pax or Optronix, he was chosen by the Matrix of Leadership to command, the first in a number of heavy burdens he has been forced to bear. Another is his bringing of the Transformers' conflict to Earth. Every casualty, human or Cybertronian weighs heavily on his spark. He does not show this side to his soldiers and never succumbs to despair. The Autobots need a decisive, charismatic leader and that is what he gives them. It was that leadership which turned the tide of the Great War.
Another Hasbro release of the MP-10 mold, which is basically a reissue of the 2010 Transformers line's Masterpiece Optimus Prime, but with the Japanese release's ID Number. Surprisingly he is NOT mistransformed on the initial official photography... until secondary stock photos had the vehicle mode slightly mistransformed. Unlike the original, Hasbro version, this version features silver paint on the interior of the trailer. This version also removes the red paint on the die cast hinge piece in his body and replaces it with blue paint. Sadly, this figure doesn't come with the Key to Vector Sigma. Due to compact packaging, the trailer is prone to scuffing.
Optimus foiled Megatron's attack on 21st century Tokyo after informing his old foe that wherever he would pop up, the Autobots would be there to thwart his evil intentions. Henkei! Henkei! volume 1 Optimus and Bumblebee later intervened when Astrotrain attacked Shinjuku Station, using their bodies to shield nearby humans from the destruction the triple-changer brought about. They were unaware that Astrotrain's rampage was really a distraction staged to keep their attention away from Megatron's gathering of energon cubes nearby. Henkei! Henkei! volume 2 Optimus continued to do battle against Astrotrain until Rodimus showed up to provide the Autobots with additional firepower. Henkei! Henkei! volume 3
The second Nightwatch Optimus Prime was released as part of the "AllSpark Power" second half of the Movie line. He is similar to the UK version of Nightwatch Prime, replacing most of his red and blue with different shades of blue and black, retaining his resemblance to Diaclone Powered Convoy in most respects. However, the subdued black and copper on the first Nightwatch Prime have been replaced with gold and a very bright blue, to signify the All Spark energy affecting the Transformers.
A non-transforming but highly articulated Optimus Prime action figure(ine), Revoltech Convoy uses the Revoltech "revolver joints" for maximum poseability. Convoy comes with a Matrix and ion blaster accessories, as well as a few alternate hands. His sculpting is explicitly in the style of Pat "serfdom" Lee's interpretation of Optimus Prime in the Dreamwave Generation One comics, but due to physical constraints has no lack of perspective.
This set is a ToysЯUs Japan exclusive, consisting of Powerlinx Optimus Prime (dubbed "Convoy Final Battle Coloration" and redecoed with more show-accurate colours, principally a silver mouthplate instead of red and varying color saturation from the Hasbro version), a "crystal" version of Overload ("Ultra Magnus Special Clear Version") made out of transluscent plastics, and an exclusive X-Dimension redeco of the Street Action Mini-Con Team. This set is entirely "new" content not available in the normal mass-retail Micron Legend line, and is also the last release of "X-Dimension" Mini-Cons. Rather than come with individual bio cards for the various characters, the set came with only a single card for Magna Convoy.
Two custom-made pieces (presented in robot and vehicle mode) by the Hasbro Transformers team as the grand prize for G4TV and Jumpcut's contest for fans to remix selected Transformers clips. Won by TFW2005.com member James Zahn, this one of a kind (well, two of a kind) piece is a almost fully vacuum-metallized Leader class Optimus Prime in red, silver and blue (based heavily upon Generation One Optimus Prime), presented with a custom display base with an embossed silver Autobot insignia and a perspex display case.
As this is the Unicron Triogy we're talking about, it should come as no surprise that Prime can transform into a Super Mode by combining with his trailer, which becomes a massive winged backpack and a pair of large boots, generally evocative of God Ginrai. To complete his Super Mode look, a small lever of the back of Prime's head raises his traditional mouthplate into place, covering his Optimus Primal-style mouth slot, and two "crests" fold out from either side of his helmet. Hasbro's instructions and stock photography for the figure orient the wings so that the two cannons point over Prime's shoulders, but Takara's have wings arcing up past his shoulders, with the cannons slung under his arms. This was the way Prime appeared in the cartoon series, and was the way all subsequent Hasbro redecos of the toy were positioned. In Super Mode, Prime is a rather top-heavy robot, and his hip joints are not that tight, which makes standing him up a challenging prospect.
Smallest Transforming Transformers Convoy is the smallest fully transforming Optimus Prime toy yet. He features an accurate transformation sequence based on the original full-sized toy, but understandably has no detachable hands, and has little articulation. His sculpt is based upon his cartoon appearances. He comes with a tiny version of his laser rifle.
The main build of the set is a massive vehicle based on Optimus's truck cab, capable of seating a single Kreon in the driver's seat. Pushing the trailer-hitch on the back end towards the cab opens up the front grill, revealing a huge spring-loaded rocket launcher with rubber-tipped projectile. The cab can also stow the included stasis pod ussed to lock away the baddies.
At some point, Rodimus learned that the world known simply as Planet Q was under threat from the world-devourer, Unicron, but arrived too late to prevent its destruction. Years later, however, he encountered the planet's surviving ruler, Alpha Q, and sided with him in his plan to use Energon to regenerate and restore all the worlds consumed by Unicron – a plan that put him in opposition with Optimus Prime when they encountered each other once again. When Megatron succeeded in reactivating Unicron, however, Rodimus relented and submitted himself and his troops to Optimus Prime's command, and they were integrated into the main Autobot force as the battles continued to defend Alpha Q's successfully-regenerated worlds against the Decepticons.
Following our last article on in hand images of Studio Series 38 Voyager Class Optimus Prime (from the Bumblebee film), TonTon Reviews (who put up the in hand images), has come through on what they said and posted their review! This review allows us to get the best look at the toy yet, as well as its surprisingly complex transformation. We see the ion blaster included stores between his legs in truck mode to fill in the gap and hold it togethyer. The backpack in robot mode also has 5mm - Read More
A Japanese TV Magazine exclusive, this release of the Super-Con class Prime toy has almost all of his parts cast in translucent coloured plastics—hence the 'crystal' moniker—representing the character's disembodied spark after his destruction in the Armada cartoon episode "Crisis" and resurrection in "Miracle". What that means for poor Over-Run (or "Surge" in Japan), also cast in translucent plastic, we couldn't say! Available via mail-order, only 5000 pieces were distributed in October of 2003.
For this re-release of Masterpiece Convoy, Takara submitted to the biggest desire fans had for the figure and produced a full-size, fully transforming plastic and die-cast metal trailer. The trailer opens up into Convoy's Combat Deck, with storage for its accessories and a functional repair drone, though Roller is conspicuous by its absence. Like the original Combat Deck, the drone can extend through holes in the roof and front of the closed trailer, and the interior has enough room to accommodate one Alternators figure in vehicle mode. Some reports suggest that the paint on this figure's chest chips more easily than past editions.

In addition to the small engine-pistol of his Alternators figure, Prime comes with the "Surfblade", a pink surfboard that can be reconfigured into either two small knives or a large double-bladed sword. As with all the Kiss Players figures, Prime also comes with a PVC figurine of a cute girl: in this case, Marissa Faireborn, who can perch upon his shoulder or sit in his driver's seat, and comes with two pairs of interchangeable arms and legs. Additionally, the set includes a CD featuring the first five episodes of the Kiss Players radio drama, as well as the exclusive bonus audio adventure, "Someday, Under the Sun."


Two custom-made pieces (presented in robot and vehicle mode) by the Hasbro Transformers team as the grand prize for G4TV and Jumpcut's contest for fans to remix selected Transformers clips. Won by TFW2005.com member James Zahn, this one-of-a-kind (well, two-of-a-kind) piece is an almost fully vacuum-metallized Leader-class Optimus Prime in red, silver and blue (based heavily upon Generation 1 Optimus Prime), presented with a custom display base with an embossed silver Autobot insignia and a perspex display case.

The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot[3]. The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.

An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
The Autobots subsequently returned to Cybertron aboard a refueled and repaired Ark with the defeated Decepticons, taking the Decepticons on Cybertron unawares and quickly capturing control Cybertron. Peace reigned for a time until a series of natural disasters began, the source of which was determined to be the planet Moebius in a parallel universe. The Autobots assembled a team to travel to this alternate universe and stop the threat; Optimus Prime personally led the team, unwilling to put anyone in more danger than himself. Wheeljack, Hoist, Jazz, Prowl, and Silverstreak constituted the rest of the team; they dubbed themselves Spy Changers because they aimed to achieve their goal with stealth and diplomacy. The team modified their bodies to match the native cyborgs using data acquired from the Sky Spy and traveled to the 22nd Strata but were soon attacked by the local Guardians, who mistakenly presumed them to be Renegades. The Spy Changers were then rescued by the real Renegades, who presumed them to be potential allies and took them back to their flagship, the Rogue Star. Renegade leader Cy-Kill attempted to court the Spy Changers as allies, but Optimus saw through Cy-Kill's deception. Eventually, the Autobots formed a secret alliance with the Guardians as well as discovered the cause of Cybertron's troubles: Renegade bases on Moebius were draining the planet's energy. The planet's geometry had turned it into a crude Dimensional Interfacer, and Moebius was tapping into Cybertron to sustain itself. Hoist was able to end the crisis by triggering the bases' remote detonation sequence. Cy-Kill was furious, but in the ensuing battle, the Autobot-Guardian alliance triumphed over the Renegades. Optimus Prime and Leader-1 shook hands as a symbol of the transdimensional friendship, and the Autobots returned to their home reality, secure in the knowledge that they had allies in places as distant as alternate realities. Ask Vector Prime, 2015/09/30
Standing only two-and-a-quarter inches tall, Smallest Transforming Transformers Optimus Prime was the smallest fully transforming G1 Optimus toy for a while, at least until the release of his chubby super-deformed Q-Transformers versions. He features an accurate transformation sequence based on the original full-sized toy, replacing the detachable hands with actual sculpted fists, and even including a tiny version of his laser rifle. Unsurprisingly, he also has little articulation and is only capable of moving his arms and legs.

The term Generation 1 is a retronym; the series was simply known as "Transformers" until the release of the Generation 2 series. However, the term has become semi-official, as both Hasbro and Takara have referred to this era as "Generation 1". New characters are still occasionally added to the line, primarily by E-hobby. (Examples: Sunstorm, Hauler, Detritus, and the like.) Large-scale production of new characters in this line ended with the onset of Generation 2. Transformers fans often are very upheld with the G1 community. This has led to controversy among fans who consider G1 to be the only "pure" form of Transformers.
As battles between numerous different Primes and Megatrons erupted quite literally all across time and space, another member of the Convoy Aggregate was later seen battling Starscream, who had been empowered by Megatron to serve as leader of his Questors. This Prime was so surprised by Starscream's uncharacteristic sports car alternate mode that he left himself open for a blast from Starscream's Retroactive Nullifer cannon, which erased him from the timestream. As he faded out of existence, Prime responded to Starscream's taunts about the death of the Alternity by telling him that they were already well aware of their prophesied end and were well prepared. Foreshadows

How to Say Expensive and Mean It - The Seibertron.com Twincast / Podcast reaches episode #213, and the discussion begins with Takara Tomy's upcoming Masterpiece MP-44 Optimus Prime version 3. This toy has a substantial price tag that has caused controversy amongst Transformers fans. In-hand impressions of Transformers Generations War for Cybertron: Siege figures come next, with analysis starting for Deluxe Class figures Sideswipe, Hound, Cog, and Skytread/Flywheels. After that, Micromasters from the Race Car, Battle, and Air Strike Patrols get a look. Weaponizers Lionizer, Blowpipe, and Firedrive come next before the Generations discussion concludes with Voyager Class Megatron and Optimus Prime. A look at the upcoming Generations Select releases of Ricochet and Red Swoop is followed by a quick examination of the recently released Transformers: Botbots lineup. The endings of the long-running IDW Transformers comics continuity comes next, with the end of event book Unicron occurring first. Optimus Prime's namesake series is talked about next before the comics discussion concludes with Lost Light's finale. Bragging Rights close out another episode with early holiday season sales driving the cast's recent purchases.
Through the years, there have been many action figures made in the likeness of the original incarnation of Optimus Prime, some of which have been featured in fiction, others of which have not. Additionally, some toy makers have made unlicensed toys in his image or accessories for the existing toys. The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[23] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the Transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original Transformers toy line.
Available exclusively from Japanese clothing company A Bathing Ape in July 2011, concurrently with a range of exclusive Transformers t-shirts, "Convoy Reissue BAPE Ver." (コンボイ復刻版 BAPE® Ver.) is a redeco of the original Optimus Prime toy sporting a unique new green color scheme, along with a tan trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese Optimus Prime packaging.
×