In Transformers: Armada and Transformers: Energon, Optimus Prime shares the role of main protagonist with Rad, Alexis, Carlos, Starscream and Hot Shot. The Optimus of this universe shares many similarities with his parallel universe versions, including nobility of spirit and a strong desire to protect all humans on Earth. In this continuity, the two sides are not looking for energon, but a small race of power-enhancing Transformers known as Mini-Cons. Optimus led his small band of Autobots to stop Megatron from acquiring their power for himself.
A retool of Lockdown with a new head. He is a simplified toy that can auto-transforms from an unlicensed approximation of a Lamborghini Aventador rather than a Lamborghini Centenario LP770-4 into a Voyager-sized robot by pulling out the arms first, and then flip the figure over itself. He features articulation on his arms, and features 5mm compatible hands.
Using the Spacebridge to travel to Earth, Prime was sidetracked when Megatron transported him to Unicron's body. Megatron attempted to cajole him into distracting Unicron long enough to transfer his consciousness into a new body. Prime refused until Megatron showed him what was happening on Earth. A massive Terrorcon invasion had devastated many of Earth's greatest cities, with the stalwart Autobot defenders nearly overwhelmed. Megatron offered to deal with the invasion if Prime would aid his rebirth. Out of options, Prime agreed, and battled Unicron's internal defences to disable a sensor, allowing Megatron's resurrection. As Megatron teleported to Earth to keep his end of the bargain, Prime, still inside Unicron, prepared to fight back.
But around the mid-’90s, Hasbro let the trademark for a toy named “Bumblebee” lapse. At that point, the Generation 1 Transformers were almost passé, as they focused on the newfangled Beast Wars and Beast Machines lines. In fact the Unicron Trilogy continuity (mid-2000s) character called Hot Shot was originally going to be called Bumblebee, and in fact had a lot of Bee’s personality traits and yellow color, until they realized they couldn’t use the name. Fortunately, they got it back soon after.

A redeco of the Wing Convoy Super Real Figure, Wing Convoy Original Figure (ウイングコンボイ オリジナルフィギュア) was available at JUSCO department stores starting on July 30th 2004. The figure was available with purchase of a Wing Saber figure, and came in a plastic baggie, rather unattractively scotch-taped inside the toy's packaging. A sticker was placed on Wing Saber's packaging to note the promotion.

Originally, the Alternators Dodge Ram mold was intended by Hasbro to be a completely different character altogether than Optimus Prime (which character is unknown), but Takara reportedly demanded the Ram be made into Optimus out of fear that the toy (whose vehicle mode is scarce in Japan as a real vehicle) wouldn't sell as well in their market if it wasn't a popular and easily recognized figure; as the figure reportedly cost twice as much to build as the others, Hasbro had to agree in order for Takara to continue fronting part of the production cost. In an ironic turn of events, the Dodge Ram was prematurely solicited by Takara not as "Convoy" (Optimus Prime), but as his Masterforce look-alike Ginrai. As a matter of fact, the head sculpt for the Alternators Oprimus Prime toy is based on the Super Ginrai (Powermaster Optimus Prime's "super mode") toy's head sculpt. Ultimately, however, Ginrai was cancelled, with only Hasbro releasing Optimus Prime as originally planned. Eventually, Takara released the Dodge Ram as as part of the new Kiss Players line, now named "Convoy" (Optimus Prime), and he will be released in Binaltech this year.


On the rocky plains where practically every Transformer battle ever seems to happen, Prime arrived in his Powermaster body to back up three of his troops against Dreadwind and Darkwing. He combined with Hi-Q and transformed, attacking with his trailer's battle station mode. Optimus then combined with the trailer to become a "Super Powermaster" and continue the attack. Who won? Find out in Marvel Comics! Powermasters commercial

A large, non-transforming toy that features light & sound effects and voice tracks by Peter Cullen. The figure itself is a representation of Optimus Prime combined with Jetfire's parts - only designed for younger children. A lever on his waist extends his wings, and flying sounds are emitted when he is moved around off the ground. The Power Bots line replaces the 2007 Cyber Stompin' line of the first film.
Studio Series Optimus Prime is an all new Voyager Class mold that transforms from robot into a Peterbilt 379 semi-truck. He comes with a pair of Energon Swords, which can be mounted onto his arms or store on the back of his robot mode or truck mode. The figure combines engineering concepts from his Age of Extinction Voyager Class figure with techniques previously used on Prime: First Edition Optimus Prime. He also features a more subdued color scheme compared to other Optimus Prime figures. Like the rest of the Studio Series figures, the figure prioritizes robot mode scale and thus stands shorter than his Voyager Class wavemate Starscream. The CG renders depict him possessing long smokestacks, but the final product has them shortened... again. He also comes with a cardboard backdrop display depicting the climatic forest battle from Revenge of the Fallen.
On the day before the Transformers GT began, GT-R Prime found himself racing with GT-R Saber when they were both out for a test run. Though Misaki warned him not to get too invested in a practice race, Prime took the challenge seriously and won the race by briefly transforming into robot mode, thus tricking Saber into slowing down in anticipation of a fight. Test Run Battle! –Prelude– Prime earned the pole position for the Transformers GT, but this combined with his victory over Saber made him overconfident, and he was unprepared when Saber attacked him immediately as the race began and sent him flying. First Fast Attack! –Whoever Strikes First Wins– GT-R Megatron also targeted Prime during the course of the race, seeing him as his fated rival. One Shot and One Kill!! –Finishing Blow–
The set also includes a redeco of Generations War for Cybertron Optimus Prime figure, which changes the original figure's dark red plastic to a brighter, more vibrant red, changes the gray plastic to a darker charcoal tone, changes the "windows" from gray to nearly black, and replaces most of the original figure's pink-ish red paint details (which were yellow on the redeco from the "Rage over Cybertron" three-pack) to teal.
Optimus Prime features a MechTech Blaster that can convert into an Energon Battle Axe reminiscent of the Generation 1 character's iconic weapon, though the weapon cannot be locked in battle axe mode. There is also a pair of C joint rods on the underside of both forearms. His MechTech blaster can plug into the port on each of his arms or be held in either hand in robot mode, or plug into one of two holes on his truck roof/robot shoulders.
When a new threat, the Elder Gods, appeared, a group of Autobots acquired the help of Tobias Muldoon and Nikola Tesla to travel to the glacier and waken Prime. Infestation 2: The Transformers #1 Tesla's Tesla tower wasn't enough on its own, so Wheeljack, Ratchet, Trailblazer, and Hound gave energy necessary to recharge Optimus Prime. Optimus awoke and revived the other Autobots with his energon reserves, before traveling to Port Cenotaph, Nova Scotia where an Elder God had risen from the sea. Diving into the ocean, Optimus cleaved parts off the Elder God until it and its followers returned to the depths. Though Tobias asked if the creature was dead, Optimus wasn't sure, but promised the Autobots would be there to defend Earth if it ever returned. Infestation 2: The Transformers #2 Infestation 2 #1

Part of the first wave of Mini-Con Battle Pack figures, this Optimus Prime figure is a new mold, about the size of a Scout Class figure (In Optimus' case, the size of Cyberverse Commander figure), and scaled with Legion Class figures. Its transformation scheme also takes some cues from the Legion Class figure. Battle Pack Optimus Prime also features a transparent orange battle axe & armor pieces, although the chest armor/flip-up mask piece is needed to be assembled first. The included pieces can be combined into a clawed battle axe, or attached to his body to form his armor (although the flip-up mask can restrict his head articulation). Optimus Prime can totally wield the axe dual-handed. As an undocumented feature, the axe can be stored on his truck mode with the tab featured on Prime's right shoulder.
Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[50] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.

In Super Mode, Optimus Prime can combine with Leobreaker to form "Savage Claw Mode", which sees the feline Autobot become a gigantic clawed arm for his leader. Alternately, if Prime's backpack is removed, he can merge with Wing Saber into "Sonic Wing Mode", with the aerial ace forming a new winged backpack and chestplate for Optimus, and providing him with new hand-held sword weapons and firing missile launchers that connect to his Super Mode boots. The nature of the combination means that the two partners cannot combine with Prime at once—at least, not without physically removing one of Prime's own arms.

This release is another redeco of Cyberverse Optimus Prime, this time with a predominately navy scheme with black accents (which vaguely resembles his Generation 1 colors), and a pair of barrage cannons that can be either held or mounted on his smokestacks, as well as a pair of handheld swords. He is compatible with all his previously released Cyberverse accessories, but not all at once.
The first Nightwatch Optimus Prime is an extensive redeco of the previously released Leader-class Optimus Prime, replacing most of his red and blue with different shades of blue and black. In fact, he resembles the original Diaclone Powered Convoy color scheme of Generation One Ultra Magnus's truck cab. The previously blue and red flames have been replaced with silver flames, as has various other decos, replaced by copper.
Takara's iteration of Combiner Wars Optimus Maximus is sold in a gift set including all five Autobots (minus the Rodimus mold). This version of Convoy has numerous changes in deco to better match his look in the Generation 1 cartoon. Like Unite Warriors Menasor, the set also features some minor improvements to the original sculpts, such as improved hip-ratchets for Convoy for increased stability. He also had the slightly modified pegs that Legends Class Rodimus (or Blackjack, Runabout, and Runamuck) can securely attach to, which was previously used for Battle Core Optimus Prime. While he features foil insignia stickers on his robot mode shoulders, he also features tampographed Autobot symbols on his side truck panels.
Optimus Prime's body was hauled out of the Arctic Ocean by the US military. While a terrorist organization run by the enigmatic Lazarus was able to seize control of several of the other Transformers that fell back to Earth, the military worked unsuccessfully to reactivate Prime. They eventually called in Spike Witwicky. Prime Directive #1 Spike was forced by the project chief, General Robert Hallo, to use his piece of the Matrix to reactivate Prime. Functional again, Prime used the Matrix to reactivate more of his fallen comrades. Prime Directive #2
The Power Plus series are similar to the Power series, except these come with the core that unlocks extra features. The Bumblebee figures in this series are nearly the same as the Power series versions (Camaro ‘Bee’s Power Plus figure has his unmasked head), so if you’re going to get them, and you want the cores, go with these versions. If you want Optimus Prime at this size, though, you’ll have to go with this version.

Once again Optimus Prime and Megatron were re-engineered, with Prime now a fire truck and Megatron a six changer, whose modes included a dragon, bat, jet, land-craft and a giant hand. Another G1 character to get a new toy for this line was Ultra Magnus, who could combine with Optimus Prime to form Omega Prime. Other combiners were created for the series too, such as Landfill and Rail Racer. Bruticus, a combiner from G1 was also recoloured and introduced into the series, with a coinciding toy re-release. The Combaticons that formed Bruticus were the first of the Decepticons to be introduced into the show along with Scourge, who as a toy was a black repaint of G2 Laser Prime. These were not the only toys to be re-released for this series, with many from past lines being repainted and packaged in RID boxes. Robots In Disguise was responsible for introducing a lot of concepts that would be re-used often in the next incarnations of Transformers.
Another Hasbro release of the MP-10 mold, which is basically a reissue of the 2010 Transformers line's Masterpiece Optimus Prime, but with the Japanese release's ID Number. Surprisingly he is NOT mistransformed on the initial official photography... until secondary stock photos had the vehicle mode slightly mistransformed. Unlike the original, Hasbro version, this version features silver paint on the interior of the trailer. This version also removes the red paint on the die cast hinge piece in his body and replaces it with blue paint. Sadly, this figure doesn't come with the Key to Vector Sigma. Due to compact packaging, the trailer is prone to scuffing.
The second known version [4] ditched the triplechanging gimmick on the cab and simplified things a good bit. This Powermaster Prime has several distinct characteristics only seen in the second design, such as the wider "block head" and two faux smokestacks on top of either shoulder as opposed to one. Also, in a rather odd twist, this design features a black head and fists for both super and regular modes rather than the traditional blue. It also had yellow eyes in either mode a la the original Optimus Prime.
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.
He comes with the Star Saber, which has a 5mm handle and a post on its hilt, as well as two spring-loaded, missile-firing "Ionic Pulse Launchers" (which are called "Eaglefire Missile Launchers" in the instructions). The launchers each feature a 5mm post, have flip open prods, and can peg onto the ports near the wheels on his robot back, giving him a pair of back-mounted rocket engines.
A retool and repaint, including really shiny chrome, of Revenge of the Fallen Leader class Optimus Prime. In this version, his dark-blue is replaced with a more purplish color and his orange blades have become translucent with some silver. Also, his fuel tanks detach and combine to form his Ion Blaster and his mouth is now visible. Unfourtanetly, all that chrome makes it even harder for him to transform than the last prime. All of these new things make him even more accurate to the movie than his predecessor. Like the picture on the right says, Buster Optimus Prime was rereleased, this time with his mouthplate, in an exclusive set with a redecoed Jetfire.
I you can get an official reissue for around the same price, do it. I lucked out and got an opened but mint Encore for $50 last week but you'll be getting lucky that way. All Hasbro reissues have short smokestacks and long stacks are harder to get separate to swap out. Average price for a Japanese reissue is around $100 opened. If you are on a budget and the kid doens't care about slight issues, the $40 KO would be the better option.
Walmart have uploaded a very nice commercial via their YouTube Channel that we are sure will please your optics. What is it about? This video features several famous and iconic cars like KITT from “Knight Rider”, Ecto-1 from “Ghostbusters”, Lightning McQueen from “Cars”, the Mystery Machine from “Scooby Doo” and even Fred Flintstone’s footmobile. As some of you should expect, our small yellow hero is present here in his Bumblebee Movie VW Beetle design, and with an impressive entrance emulating Ironhide’s jump from the 2007 live action movie.
The Transformers: Prime toyline hit shelves in November 2011. Originally, Hasbro played coy with the series receiving a toyline at all, emphasizing that it was a television series first and foremost. There were initial plans to release a small assortment of three Deluxe figures (Bumblebee, Arcee, and Starscream) in the Generations line before they were moved into the expanded "First Edition" launch line.
Towering at only barely over two inches, this was actually not just the smallest movie-verse Optimus but even the smallest transformable figure of Optimus Prime for a while - ironically enough, being even slightly tinier than the Smallest Transforming Transformers Optimus Prime - that is, until he was later "out-tinied" by two other cute super deformed versions.
For the 1987 and 1988 lines, Hasbro introduced even more radical ideas through new sub-groups. The Headmasters and Targetmasters came with partners who transformed into the figure's head or weapon, respectively. Powermasters, including the new version of fan favorite Optimus Prime, came with partners that transformed into engines. Each line would see various permutations over the two-year span, including smaller Headmasters, Double Targetmasters, and a Powermaster with two engines.
Optimus Prime is a redeco of Revenge of the Fallen Optimus Prime with predominately red forearms and red/silver thighs, which it was meant to be a Generation 1-inspired deco. He comes bundled with redecos of The Fallen, Megatron, Jetfire, and Starscream in a Kmart-exclusive five-pack. To date, this is the only Hasbro release of this figure that acknowledges the combining feature between Jetfire and Optimus Prime.
One of the single rarest Lucky Draw Figures in existence, this "Custom Color" redeco of Super Optimus Prime was limited to only one in the world. It was the grand prize of a coloring contest held in Septemeber 2005's TV Magazine, in which entrants colored in lineart of Prime with the deco they wanted to see. The winning entry was in green, blue and gold, while ten runners-up received one of five gold or five silver Lucky Draw versions of Prime.
I am so not in for this, it will still look arguably better then MP-01. But the true MP Optimus Prime is MP-10. This new one is all about animation, and the backpack is pretty huge. MP-10 has a built in part for weapon storage... it was not actually needed. Idk about this new direction. I’ve been pretty much exclusively 3rd party and older MP’s. This new style of lavishly G1 animation is not for me. MP-10 was the standard and the perfect blend. For whatever reason Takara is/has been pushing a new direction that a good majority don’t really want to go in on. See Transformers 3rd party market. If there wasn’t a itch that needed scratching it wouldn’t exist.
Or instead of adding a surface to the package, sell it with its own little plaque / platform. A really thin piece of hard plastic or something that is smooth as well as possibly having a graphic or something printed on it. And then market it as a collectible and only make so many of them. I'm thinking in the price range of $199-$299. I'm not sure the costs going into it, so I can't say.
This redeco of the Ginrai tooling of the Powermaster Optimus Prime figure (released concurrently with the 2001 reissue of the Ginrai figure) was a Toys R Us Japan exclusive black repaint, made to represent the original Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' color schemes.
×