Armada Built to Rule Optimus Prime transforms into a fair approximation of his vehicle mode, but the robot mode is quite inaccurate, due to the very broad, flat Trans-Skeleton with thin, stick-like limbs attached to it. The set came with a very simplistic "Mini-Con" Sparkplug partner kit that did have a more dedicated "Powerlinx" connector than the standard construction pegs, though these are a bit too thin to be used as attachment points for regular Mini-Cons (they stay, sort of, but it's a very loose connection). The 101-piece set also features pressure-launch missile-firing "smokestack" cannons.
Optimus took the mantle of leadership as the civil war against the Decepticons erupted, and would remain in that position for the next nine million years. Ariel was rebuilt into Elita One, the commander of the Autobot resistance on Cybertron. The fate of Dion is left unrevealed. It has been speculated by fans that Dion might have become Ironhide or Ultra Magnus just as Orion and Ariel became Optimus and Elita, but this remains fan speculation only, and, his close friendship with Optimus notwithstanding, there is no evidence to support the idea.
A (technically) unreleased "black" redeco of Henkei Voyager-sized Convoy using the same plastic layout and paint mask but replacing red and blue with black, silver with gray, leaving the previously vacuum-metalized grill/fender area unpainted, changing the blue tint for the windows to red and changing all silver and yellow paint operations to blue. The red Autobot insignias would have remained unchanged.[7]

In the Autobot Campaign, Optimus Prime provides intelligence and missions to Bumblebee in his search for the Allspark. Eventually, the clues lead the Autobot to Sam Witwicky. After saving Sam from Barricade, Bumblebee finally completes preparations for the Autobots to arrive on Earth. Once on Earth and having informed the two teenagers of their mission, Prime and the Autobots are discovered by Sector 7. Optimus sends Jazz on a high-speed destruction distraction mission, then sends Ironhide to rescue Jazz from a double-threat posed by the government agents and various Decepticon scouts. When Bumblebee is captured, Prime transforms and chases the chopper which from which the small Autobot is tied. After a lengthy chase, Prime manages to catch the net, only to be thrown off by another Cybertronian meteor. As Bumblebee is carried away, Optimus promises he will not fail him again. Jazz informs him that the meteor is not an Autobot. Prime confronts the new threat, who turns out to be the Decepticon triplechanger Shockwave. The two battle it out across Tranquility before Optimus finally destroys him. During the battle, Optimus overhears Starscream's transmission revealing the location of the Allspark. Optimus then returns to an intel role as he guides Bumblebee in his mission to retrieve the Allspark from Hoover Dam. Unfortunately, the Decepticons manage to free Megatron, leading to the final battle in Mission City. As the Autobots battle it out with the Decepticons to protect Sam and the Allspark, things seem to take a turn for the worse as Megatron finally arrives. Before he can claim the Allspark, Optimus attacks him. Optimus defeats Megatron and leaves him on the ground, seemingly devoid of life. However, just as Sam is giving the Allspark to Optimus, Megatron awakens, leaping at Optimus with his chain-flail out, making one last attempt at defeating his adversary. Optimus grabs the chain, pulling Megatron in closer, and, with the Allspark clutched in his fist, delivers a punch through Megatron's spark, killing him. Optimus reflects on the losses and rewards of this battle, as the Autobots have a new home, but many were killed in the battle. The story ends with Optimus and the Autobots choosing to remain in Earth, proclaiming it as their new home.

The smallest of the Energon Igniters, the 3-inch Speed series transforms between modes in 7 steps or less. Unlike previous small movie figures, this series has a lot of detailing and articulation. The bots don’t end up looking like carved blocks of plastic. They could use a few more paint apps, but that’s to be expected at this price point. They even interact with cores sold with the larger figures (though “interact” in this case seems to mean “tow behind”).
In "A Fistful of Energon", Optimus Prime is informed by Ultra Magnus about Starscream's escape from prison. He is quite upset when he has heard that Prowl set out in search for him on his own. He orders Prowl to return, but he disobeyed him. Later, Prowl is bound and abandoned by Lockdown, who wants to get the bounty that Megatron had set on Starscream. But Optimus Prime, together with Bulkhead and Ratchet, succeed in finding and releasing Prowl.

This Classics Optimus Prime is a smaller, deluxe-class toy bearing a greater resemblance to the original G1 toy. He was only available in a special Versus pack with a similarly unique Classics Megatron toy and later the FAB version of the 2007 movie Prime. Later releases of this toy had him individually packed in some European countries. His vehicle mode and robot mode is based upon the original toy, but due to limitations in design, budget and gimmick, does not succeed very well. His thighs cannot collapse into his lower legs, meaning they are exposed in vehicle mode, as is his head. Although to be fair, you wouldn't really notice the leg thing if he had a trailer. But, he is greatly articulated.

The Animated Tech Spec written by Derrick J. Wyatt in Hasbro Transformers Collectors' Club #24 states that Rodimus as having the rank of Prime and clearly being the leader of a team like Optimus and Sentinel. His toy is listed as "Rodimus Minor" which Hasbro explained at San Diego Comic-Con 2009, was because "there were already too many Primes in the toy line". Within the series, he is only ever called or credited as "Rodimus".

A Voyager-class two pack of Classics Optimus Prime, representing the Generation 1 version of the character, and a redeco of Age of Extinction Evasion Optimus Prime representing the Movie character (The deco patterns is most likely to emulate the character's design in 2007, with vague results). Like Rusty Optimus Prime (seen below), he features flames on his vehicle mode doors.


When a two-part race was being held with a massive supply of oil and gasoline as the prize, both the Decepticons and the Autobots badly wanted to win it. Megatron entered the race by hiding himself inside a hollowed-out car and harassed Cliffjumper all throughout the contest. When Prime discovered the car was being driven by his arch foe, he swiftly pulled a telephone pole out from the ground and used it to bash the mortal hell out of the cheating Decepticon. Thanks to Prime's violent intervention, Cliffjumper was able to win the race. Afterward, Optimus Prime celebrated the Minibot's victory with a gargantuan smile as all the Decepticons starved to death. The Great Car Rally
Revenge of the Fallen Legends class Optimus Prime is an all-new, much more accurate mold compared to the 2007 Legends class Prime, having a much greater accuracy in both robot and vehicle mode. In particular, his vehicle mode isn't inexplicably missing one smokestack like the 2007 toy. It should be noted that he was molded in only one paintable plastic color, with red and blue deco patterns decked on it. The top of the truck's bunk (ending up on his back in robot mode) has a slot to combine with Jetfire. For some reason, this isn't mentioned in the instructions, though they're hardly needed.
Offered as part of a Lucky Draw campaign in August 2004, this extremely rare version of Masterpiece Convoy is almost entirely vacuum-metalized gold, lacking any other painted detail or stickers. The parts which are not viable are molded in a flat golden plastic; the only exceptions are its rubber tires, the core of the Matrix and the energon-axe, which remain black, blue and orange, respectively. Whether or not the figure was intended to evoke Optimus Prime's entirely-golden appearance in the cartoon episode "The Golden Lagoon", when he was coated with electrum, is unknown; given that entirely chroming a figure gold is a fairly standard deco for Lucky Draw figures, it may just be happy coincidence more than anything else.
A redeco of the original Generation 1 Optimus Prime cab robot sporting an egregious number of Pepsi-themed paint masks and details, Pepsi Prime's differences from Pepsi Convoy are minimal: he features the shortened smokestacks previously seen on the Commemorative Series release of the mold, the blue pattern on his decals are different (matching the American Pepsi can/bottle look at the time rather than the one used in Japan), and also has a different layout for the Pepsi logo on his right shoulder. Like Pepsi Convoy, he comes with an entirely new trailer unit, specially designed to carry either a single 500ml (16.9 oz) size soft drink bottle, three 350ml cans, or 12 bottle caps (bottle cap figurines being a common and popular collectible item in Japan). In a first for the Prime mold, the figure's fists store in holes on the underside of the trailer while he is in vehicle mode. His ion blaster (which also stores under the trailer) is the first Hasbro reissue to feature the original, thick-barrel sculpt, which was reinstated to the mold by the Transformers Collection release of Prime a few years prior.
Released as part of TakaraTomy's Transformers Movie The Best toyline to conclude the 10th anniversary of the live-action film series, this Optimus Prime is an extensive redeco of his Evasion mode toy. He also uses the faceplated head and the dark gray-colored Ion Cannon used for the Evolution 2-pack/Platinum Edition 5-pack release. While his deco had taken cues from both the TakaraTomy release of Evasion Mode Optimus Prime and the Platinum Edition Breakout Battle figure, the weathering pattern bears a similar resemblance to his rusty version of the figure. Unfortunately, this release suffers from heavy mold degradation, particularly in the form of ill-fitting tabs around the truck front/shoulder area.

An additional oddity is that unlike every other toy in the Go! toyline, Optimus Exprime came packaged in a box without a window. This is potentially because of the sheer amount of information TakaraTomy wanted to print on the box, or because they were unable to fit him into the box in robot mode with all of his accessories displayed. Whatever the reason, it left him with a smaller box than the other voyagers in the line, a substantially-altered box layout, and a much shorter profile.
Available exclusively from Japanese clothing company A Bathing Ape in 2014, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a green color scheme matching the Convoy Reissue BAPE Ver. of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
This Wal*Mart-exclusive two-pack pairs the deluxe-size Classics Optimus Prime figure with live-action movie line's Fast Action Battlers Power Hook Optimus Prime toy. Both toys are identical to their original releases, and together represent the Optimus Primes of the oldest and newest generations (at the time) of Transformers, respectively. The movie Prime is designated "2007 Optimus Prime", while the Classics figure is dubbed "1984 Optimus Prime" (referring not, of course, to the toy, which was produced in 2006, but to the character).

This release is another redeco of Cyberverse Optimus Prime, this time with a predominately navy scheme with black accents (which vaguely resembles his Generation 1 colors), and a pair of barrage cannons that can be either held or mounted on his smokestacks, as well as a pair of handheld swords. He is compatible with all his previously released Cyberverse accessories, but not all at once.

© 2019 Hasbro.com All rights reserved. All audio, visual and textual content on this site (including all names, characters, images, trademarks and logos) are protected by trademark, copyrights and other Intellectual Property rights owned by Hasbro or its subsidiaries, licensors, licensees, suppliers and accounts. By using this site, you agree to the Terms and Conditions of Use.
Part of the first wave of Age of Extinction: Generations Voyager Class toys, "Evasion Mode Optimus Prime" is an all-new figure based on the character's initial form in the film, transforming from a cab-over semi truck into a robot mostly similar to his previous movie design. The truck mode is heavily based on Generation 1 Optimus Prime's White Freightliner WFT alt mode in both sculpt and deco, although it draws a few details, such as the singular smokestack and wheel designs, from the heavily faded Marmon 97 seen on-screen. In robot mode, he sports faux-kibble windows and, amusingly, two false smokestacks. Unfortunately, due to being used with the transformation, he lacks the real elbow joint on the arm, which makes the lower section of the arm the only poseable section. Also, Optimus can wield weapons with longer posts while his arms are in a "default" 90° position.

Alternatively, if Optimus chose to retreat either when initially confronted with the overwhelming Decepticon threat, or after realizing that his troops are too weak to fight after ordering them to concentrate their firepower equally amongst the intruding Decepticons, the ensuing underground adventure can have multiple outcomes; the Autobots become the captive of the Insecticons, forcing Optimus to either entrust Beachcomber with the fate of his troops, or to bargain with the Insecticons for the safe release of his Autobots; or dealing with the theft of the Sun-Pak by either duelling Megatron for the device's ownership, stealing the Sun-Pak back from the Decepticons or charging Mirage and Buster with the device's retrieval. If Optimus duels Megatron for the device, he either wins through brute force or by being more "cunning" than Megatron and destroying the device before the Decepticons can claim it as their victory prize. If Optimus attempts to steal the Sun-Pak under the Decepticons' noses, Optimus is shot by Megatron when the Decepticon leader notices Optimus and Smokescreen skulking towards the Sun-Pak. The Autobots nonetheless retrieve it when Smokescreen blots out the sun with his emission fumes, forcing Megatron to pass the Sun-Pak towards Buzzsaw in order to bypass the Autobots' smog cover, only for Optimus to intercept Megatron's pass and drive away with the Sun-Pak in Autobot possession. Finally, if Optimus has entrusted the Sun-Pak's retrieval to Mirage and Buster, the Autobot leader makes the duo swear not to engage the enemy for fear of their safety. If his Autobots keep their promise to him, Optimus is called in alongside the rest of the Autobots when the Insecticons are discovered, and Optimus leads a successful ambush towards the Insecticons, at the cost of the Sun-Pak itself. Attack of the Insecticons


The Hot Rod from the future animated movie continuity would also appear. Target: 2006 had Hot Rod, Kup and Blurr timejump from 2006 (specifically partway through the Transformers movie) to 1986 to thwart Galvatron's scheme, under the influence of Unicron; later post-movie stories revealed that Firebolt had died on Earth years before 2007, and Space Pirates had Rodimus Prime briefly reverting to Hot Rod during the Quintesson attack on Autobot City. This Hot Rod also appeared in several of the "Aspects of Evil" stories. Told from the flashbacks of an aged Rodimus Prime, these had Hot Rod come up against some of the greatest Decepticon villains. He accepted the surrender of Scorponok - only to wind up defending him and a human town against the Micromaster Air Strike Patrol: defending Autobot City from a full-scale attack by Shockwave: and being captured and used as a pawn by Megatron to flush out an Autobot spy in his ranks. (Marvel UK #223-227)
Optimus Prime has a wide range of articulation for a relatively bulky figure. He has ratcheting joints in his shoulders, elbows, hips and knees, with swivel joints and ball joints supporting them in his biceps, lower knee joints and ankles. Again, unusually for a mainline figure, especially at the Leader pricepoint, his hands have individually articulated fingers and thumbs, but no wrists.
Oddly, he had a different plate in those films when in car mode: 900 STRA. In Dark of the Moon, they finally decided to keep his robot and car mode plates consistent. In robot mode in the Dark of the Moon and Revenge of the Fallen video games, he wears 5BBM2. 5LKZ213 was seen in some set photos of robot mode for the first film. Various models for promotional exhibits have featured KDM 0814, FXPERTS, and, of course, BUMBLBE.
Simon Furman's "Alignment", a text story available through Transforce, a British Transformers convention, mentions Prime falling during what was intended to be the final conflict with the Decepticons at Pinea Omicron, long after the events of the Generation 2 comic book. He managed to defeat Galvatron II, but in doing so, was damaged such that Grimlock had to engage a stasis field around him to save his flickering Spark, making Prime a living war monument.

If Sparkplug suggested that the Autobots not worry about subtlety, the entire squad transformed and began prowling the streets in search of Decepticons. Oblivious to the panic they were causing, Optimus assumed that the Decepticons were spotted nearby when a police officer declared that the city was under siege by giant robots. Unable to restore order in time to halt the Decepticons’ plot, Optimus and the rest of his team were destroyed in the ensuing earthquake.
One peaceful day, Optimus decided it was too quiet, and sent Bumblebee and Mirage to find out what the Decepticons were up to. Sure enough, the Decepticons were looking for a factory, so Optimus had Mirage create a holographic factory as a trick, and ambushed the Decepticons. Optimus himself hurled Megatron into orbit. Decepticon Patrol Optimus and his Autobots rescued Sparkplug and Buster Witwicky when the pair were captured by Decepticons, and afterwards Prime was amazed when Sparkplug repaired Wheeljack and Prowl. After Bumblebee and Hound discovered that the Decepticons were attacking Hoover Dam, Optimus and his team defeated them. The Deadly Fuel Shortage

Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster stored in the form of the fuel tanks on his back, and a shell cannon stored on his back, two retractable energon blades that extend from both forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, two retractable energon hooks on both of his forearms, and bladed knuckles. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.

Optimus Prime can also combine with Leader-class Jetfire to form Jetpower Optimus Prime by slightly transforming his backpack and feet. Sadly, this takes away from his leg articulation, because otherwise he could never support the massive backpack he has in this mode. However, fans have created alternate configurations that increase leg articulation and movie-accuracy.


With Season One of Cyberverse drawn to a close, we have word of a newly-listed Cyberverse DVD currently available for pre-order. Titled ‘Transformers Cyberverse: The Journey’, the anthology consists of 66 minutes of product, which can only be assumed to consist of the first six episodes, given the DVD’s plot synopsis and the title of the collection corresponding to the show’s fourth episode, ‘The Journey’. The DVD itself is listed here by New Zealand based online retailer - Read More
Smallest Transforming Transformers Convoy is the smallest fully transforming Optimus Prime toy yet. He features an accurate transformation sequence based on the original full-sized toy, but understandably has no detachable hands, and has little articulation. His sculpt is based upon his cartoon appearances. He comes with a tiny version of his laser rifle.
In this universe, Optimus Prime transforms into a fire engine. The front section of the vehicle detaches and becomes Prime himself, armed with "Blaze Blaster" cannons. To attack, he is able to use his headlights, known as the "Fire Flash" attack, and leg wheels, known as the "Gyro-Strike". The rest of the vehicle transforms into a mobile battle station/refueling port/communications array and can combine with Prime as additional weapons and armor, forming his super mode referred to as "Super Fire Convoy". The ladder/hose section houses Prime's Power Stream water cannon, capable of shooting freezing streams of water, called his Blizzard Storm attack. It also contains a quartet of rocket launchers. In super mode, his feet contain missile launchers than can mount to the shoulders of his regular robot mode. In this mode, he can fire his fists for his "Flying Fist" attack.
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is a extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation One and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
Certainly the most iconic, and most common, leader of the Autobots is Optimus Prime. But the thing about Optimus Prime is that he dies... a lot. And every time he dies, someone has to take his place-- until he’s invariably resurrected in one way or another, that is. In many storylines, including the original animated Transformers: The Movie, it’s Hot Rod who takes over as Rodimus Prime.
Optimus Prime appears as leader of the Autobot forces in the Transformers: Timelines story "Shattered Glass" by Fun Publications. When Cliffjumper, the Generation 1 character from a parallel universe, is seemingly discovered alive, Optimus welcomes his old friend back to the Autobot fold. After learning that Clffjumper is not the evil Autobot he remembers, he shoots Cliffjumper and leaves him to fend for himself in the Rad Zone. Optimus plans to launch his new warship, the Ark, to conquer Earth, but Cliffjumper aids Megatron's heroic Decepticon forces in a successful attack on the Ark's launch platform.[175]
Part of the eighth wave of TakaraTomy Go! toys, Optimus Exprime is capable of changing from a robot to either a train or (something resembling) a dragon and back again. He can also form the torso of either DaiKenzan (with Kenzan forming the upper torso, head, and arms and Gekisoumaru forming the legs) or DaiGekisou (With Kenzan and Gekisoumaru reversed from their roles in DaiKenzan).
This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.

A black and red version of the First Edition deluxe Optimus Prime could be seen in the San Diego Comic-Con 2011 Transformers slide show, inside a mock-up of the wearable Matrix of Leadership package done for the convention that year. This figure was presumably a test-shot, as it seems to share plastic colors with Generations Sky Shadow (who was, coincidentally, first revealed at that same Comic-Con).
It uses the 1985 post-rub mold, no metal plates, and the trailer's launcher fires short(this can be modded with some disassembly, Toy Polloi has a video showing how). The wheels roll a bit iffy, this is a common documented issue. Personally I believe there is a slight molding error in the robot, the legs do not seem to fold down quite as far as an official cab's legs do, causing a very slight lean backwards.
The percentage in the title is not a turn of phrase nor something inferred in any way, it comes from a quote by Bumblebee movie producer Lorenzo Di Bonventura. Whether Bumblebee is a prequel or reboot (or anything in between) has been a hot topic for fans , especially those who want to distance themselves as much as possible from the previous films made by Michael Bay. These debates have reached Bonaventura who sat down with Metro and explained why to him, the Bumblebee film was 100% a prequel - Read More

Optimus has the ability to change any part of his robotic body into a tool or gadget. He has swing lines in his wrists. His wrists can also fire capture bolas. His arsenal includes a grappler, fire extinguisher and a negative friction spray. Unlike in all the previous series, his face can almost always be seen, because his mouthplate is retractable like in the 2007 live action film.

Replacing the weapons of the Hasbro releases, these new Mini-Cons transform into their larger parnter's signature weapons. They came as unassembled, unpainted model kits, similarly using stickers to fill in details. Several Arms Microns also came by themselves in bagged kits, plus there was a metric ton of promotional Microns throughout the line, possibly more than any prior line (even Micron Legend!), and that's not counting the ones that were released during the First Edition series. The Arms Microns also had multiple 5 mm posts and holes, and could be combined into super weapons, plus the larger toys were retooled to have new Arms Micron mounting points.


Although peacetime in the decade that followed the apparent deaths of Unicron and Galvatron afforded Prime the opportunity to train his own elite squadron of Autobots the martial art of Kumite. The re-emergence of the war, however, forced him to return to his role as commander. The conflict for control of the Mini-Cons and the truths he was forced to face in his confrontation with Unicron seems to have changed him. Optimus Prime, Grand Convoy' in the Japanese version, was now a stern, more direct commander and shows little of the conflict that held him back before. Despite this, he is still known to make the same kind of decisions, which include an emphasis on team work and the foundation of the Autobot values.
Optimus led the search for the AllSpark through space, but he and his troops were unable to locate the artifact. Though the search seemed hopeless, Optimus assured the others that they would not give up until Cybertron's last hope for survival was found... At that moment, a strange green pig crashed through one of the ship's windows, with the AllSpark in tow. Optimus stared in bewilderment at the strange creature as it asked for a ride back home. Hard Boiled

A golden-chrome redeco of Cybertron Metroplex was offered as a contest prize in the December 2005 issue of TV Magazine, and came with an equally blinged-out Legends/EZ Collection Optimus Prime figure. Fifteen of this set were available as prizes in the initial contest; a single Metroplex was later offered as one of many prizes in a Takara website contest, but this version came only with the standard metallic paint version of Prime.

After having spent an extended period of time lost on Quintessa, Optimus was returned to Cybertron by the Turbomasters during their efforts to retrieve the similarly lost Flash, who he had been drawn into Perceptor's Dimensional Interface Assembly. The Age of Wrath Pt.5 Though badly damaged, Optimus led an insurrection against the then Megatron-controlled Cybertron, and successfully overthrew his enemy from power, all the while thwarting a Quintesson invasion. The Age of Wrath Pt.6


Like the larger First Edition figure, you can actually separate the robot mode from his vehicle shell, displaying both of his modes at once... albeit unlike the First Edition figure, this tweak could sacrifice the even stability between those two separated figures. Some of the pieces like the legs/rear wheels are particularly difficult to separate.
Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster stored in the form of the fuel tanks on his back, and a shell cannon stored on his back, two retractable energon blades that extend from both forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, two retractable energon hooks on both of his forearms, and bladed knuckles. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.

But it is scary to think that there is a strong possibility they will look at redoing almost every Masterpiece now if this is a success. The MP+ releases have me feeling tired. I don’t have to get them but I have a completionist mentality. But a redo... I’m almost ready to check out of MP completely. I waited so long to get six seekers done pretty well to me. Now there’s a chance they will redo them. And soundwave. I sure hope I’m just being a worry wart.
After the rise of the Decepticons and the death of the merciless Zeta Prime, he became the Prime, and entered what would become a millions-of-years-long war of attrition with the Decepticons, which would lead to the death of Cybertron and the spreading of the Cybertronian civil war far beyond their homeworld in a push for resources. With the end of the war and the emptying of the Matrix of Leadership to restart Vector Sigma and rebirth Cybertron, he found himself rejected by the returning civilian population, and - secretly gladly - abdicated his rank and returned to his original name of Orion Pax as he travelled through the galaxy.
He made it out of the building and ran into the real Sunstreaker, who blasted the 2 clones following Hot Rod. Sunstreaker ignored Hot Rod's warning about Scorponok's army and stormed into the building so Hot Rod painfully wired himself to send a distress signal. When Sunstreaker's real head was later disabled by Hunter, the Headmaster clones shut down, which Hot Rod explained to Grimlock. The group was surprised by the arrival of Shockwave, but Ultra Magnus had heard Hot Rod's distress call and was on his way to Earth. After Scorponok knocked out Sludge and Grimlock tended to him, the remaining Dynobots offered Hot Rod a lift aboard the Monsterbots' ship. He refused though, and made it back into Machination HQ to take care of something "personal". He eventually found Scorponok's real head. Hunter also showed up and let Hot Rod know how to disable it, but before he could do so, Scorponok grabbed him. Before Scorponok could crush Hot Rod's head, the Dynobots showed up and began to battle Scorponok. Hot Rod told Swoop which wires to sever, and he did just that, reducing Scorponok to a catatonic state. Ultra Magnus arrived took everyone back aboard his ship, which later docked with the Ark-32. Within 3 days, Hot Rod was fully repaired, with a new body form design.
There is one aspect not looked at in the price and that is the shift to model building vs. creation leading to a change in the utility of the pieces. I seem to need many more sets to get a useful variety of pieces these days as many of the sets contain a lot of pieces that are very specific to the needs of the set and are less useful when one wants to create their own designs. It would be a fascinating addition to rate each of the block types on its utility, perhaps by its prevalence in other sets, and then assess each set on its total utility score. So then the question is how many sets would you need to by to achieve different levels of utility and how has this changed over time.

3. Licensed themes: In the 80’s the Lego sets were more generic and interchangeable among themes. There were the basic Space, Town, Castle themes. The color schemes within a theme were more homogeneous (i.e. Blacktron sets or Mtron sets all had a common color scheme). Since there was no “fictional” real life object being copied, piece selection tended to emphasize versatility over “realism”. Almost every Lego set of the past had pictures of alternate models featured on the boxes and instructions that was meant to inspire a child to not just build the model featured in the instructions, but to embark on the mental challenge of making their own creations.
There is one aspect not looked at in the price and that is the shift to model building vs. creation leading to a change in the utility of the pieces. I seem to need many more sets to get a useful variety of pieces these days as many of the sets contain a lot of pieces that are very specific to the needs of the set and are less useful when one wants to create their own designs. It would be a fascinating addition to rate each of the block types on its utility, perhaps by its prevalence in other sets, and then assess each set on its total utility score. So then the question is how many sets would you need to by to achieve different levels of utility and how has this changed over time.
A Japanese exclusive, this is a new line of Transformers toys shaped from Disney characters that were first introduced in 2009. Originally revealed in the November 2008 issue of Figure Oh! Magazine in Japan, it was a collaboration project between Takara Tomy and the Walt Disney Company. The first line of the toy series is the Mickey Mouse Transformer which was modeled after Optimus Prime with the same colors as its Transformer counterpart and can transform into a cartoonish trailer truck like the original version. The toy was released on February 26, 2009 following with the Black and White Version a month later on March 26, 2009. A figure of Donald Duck based on both Bumblebee and Herbie the Love Bug, and a second repaint of the Mickey Mouse trailer in Halloween colors, are also planned for release.

Optimus was checking up on the Autobots' ongoing energy collecting campaign when Wheeljack informed him that a disturbance in Sector 33HM of space-time would eventually cause major problems in its time-stream. Optimus assigned the investigation of this disturbance to Bumblebee, then noted that Hot Rodimus had not completed his latest report, communications with the young Autobo having been lost while he was on his own mission. With a brief inspirational speech, he urged his subordinates to redouble their efforts in maintaining harmony throughout reality. Little did Optimus suspect that in his own universe, Megatron was planning a coup against the Autobots... Uprising
Available exclusively through e-Hobby, this black and teal repaint of Hybrid Style Convoy features the traditional "Nemesis Prime" color scheme, but represents a version of Optimus Prime himself. In addition to all the original accessories, the toys also includes several more deliciously metatextual goodies, themed around the Generation 2 toy and comics: two new large guns patterned after the new weapons wielded by the Generation 2 Optimus Prime toy, and two additional (blue) Prime heads that can be swapped with the figure's regular noggin, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger. One head is pristine, the other decorated to match the battle damage seen on the cover of the first Generation 2 issue.
In time-honored tradition, Prime's instructions depict the toy with an alternate "pretooled" head – in this case, a version with the faceplate deployed, used on the Platinum Edition and "Rusty" releases of the figure (see below). Additionally, his packaging stock photography depicts him with extra white/silver paint details, especially on his chest and wheel rims, as well as having gray upper arms with red details, among other differences.
When Jazz brought Steve Guymo to the Autobot base, Optimus and the other Autobots realized that the Decepticons were behind the abduction of humans from airports across the nation. They were able to find the captive humans, whom the Decepticons were intending to ransom to the US government, and free them before engaging Starscream and his squad in battle. With the Decepticons defeated, the Autobots returned to base where Optimus thanked Steve for his help. Sun Raid (Listen 'n Play)
In "Human Error" Parts 1 and 2, Soundwave captures the Autobots with the help of his minions, Laserbeak and Ratbat, in order to brainwash them. Part of Soundwave's elaborate scheme consists of tricking the Autobots into thinking they have turned human. Optimus Prime's human form is a male caucasian in his early 20s wearing a red jacket. Sari forms a group of "Substitute Autobots" which consists of Scrapper, Wreck-Gar, and Snarl, to rescue them. They free the Autobots from Soundwave's control and Optimus grabbes Laserbeak to engage in a guitar vs. keytar battle with Soundwave, who used Ratbat. Optimus smashes Soundwave and Ratbat into pieces using Laserbeak in guitar mode, but Laserbeak grabs Soundwave's surviving components and flees.
Optimus & Shreddicus were initially exclusive to San Diego Comic-Con 2017, where they sold out. A small portion of the run had been held for future sales: Hasbro Toy Shop put the set up for sale for about five minutes on August 14 before selling out. The remainder was available at HasCon 2017's exclusives booth, but again they burned through the stock very quickly.
Hot Rod has a youthful attitude, and serves as an older brother figure to Daniel Witwicky, son of Autobot ally Spike Witwicky. He has a sort of mentor-student relationship with the veteran Autobot Kup. He was also good friends with Springer and Arcee. Later in life, he temporarily bears the Autobot Matrix of Leadership and becomes Rodimus Prime (Rodimus Convoy in Japan), and new leader of the Autobots.
The color scheme of this special redeco of Super class Optimus Prime was decided through a colouring contest held in the December 2004 issue of TV Magazine, in which entrants coloured in lineart of Prime in the scheme they wanted to see. The winning entry rendered Prime in a... distinct palette of grey, cream, dark red, and purple chrome, with blue, white, and yellow drones. It was limited to only ten pieces, making it one of the rarer Transformers toys in existence.

This deluxe-size, highly-poseable version of Armada Optimus Prime is an entirely new mold, retaining the ability to tow Super Base Prime's trailer, though he cannot combine with it. He comes with the Mini-Con Over-Run, who can transform into a gun for him, or can peg onto the Powerlinx plug on Optimus's back to activate a double-fisted "punching" action (that looks more like hyperactive shrugging). Like the Super Base figure, Prime has a flip down chestplate, but lacks a molded-in Matrix, and his smokestacks can be removed (and in many cases will simply fall off), but cannot peg together as a gun. Shipping in a great many waves throughout most of the later run of the line, Super-Con Optimus became a notorious pegwarmer.
A retool of Crash Combiner Optimus Prime available in a two-pack with Grimlock, featuring a new Optimus Prime-ish Combiner head and new arm parts with a green dinosaur-themed front shoulder pads, and he features a lighter shade of red plastic. Like the previous versions, Optimus Prime can become the top half of any Crash Combiner gestalt, though his official combination is with Grimlock as Primelock.
Back in the 60s, Hasbro was commissioned to play down the negative stigma surrounding US soldiers fighting in the Vietnam War. The result was four, 12-inch tall dress-up dolls featuring realistic camouflage fatigues and weapons of the time. The figurines represented the Army, Navy, Air Force and Marines. There was no real storyline at the time which limited the allure of the toys.
A non-transforming but highly articulated Optimus Prime action figure(ine), Revoltech Convoy uses the Revoltech "revolver joints" for maximum poseability. Convoy comes with a Matrix and ion blaster accessories, as well as a few alternate hands. His sculpting is explicitly in the style of Pat "serfdom" Lee's interpretation of Optimus Prime in the Dreamwave Generation One comics, but due to physical constraints has no lack of perspective.

The use of a G1-based Orion Pax design and an Aligned-based Optimus Prime design with Movie Optimus Prime packaging art makes it hard to know where on the wiki this should go, but given the general movie-themed bent of the Tribute line, we're putting it here. Continuing the tradition, the 2-pack was first released in some Asian countries like Taiwan without any prior announcement from Hasbro itself. A few months after the 2-pack's release, Tribute Optimus Prime & Orion Pax saw worldwide release through Amazon, including an Amazon Japan listing bearing a The Last Knight ID number.

While stock photos and renders show the figure with a faceplate, this image posted by the Transformers Facebook page shows him with his mouth exposed. This was later found as a variant at least once. A running change was made, changing the blades to be more translucent. The semi-translucent blades release features a date code "73461", whereas the translucent orange blades version features a date code written as "80171".
Optimus made his way to the Primal Basilica, where he found Perceptor standing over the Mistress of Flame's battered corpse. Unable to do anything for her, Prime activated the Basilica's defenses as a means of stalling Trypticon. Learning from Perceptor that Rodimus had given up the Matrix, the two entered the chamber of the Chorus of the Primes to have the Matrix returned to him. Desperate Actions However, Optimus revealed the Matrix was not for him, but rather for Perceptor, as he wanted to make sure it would be taken as far away from Trypticon's grasp as possible. He guided Perceptor to a secret exit from the Basilica and sent the scientist on his way. Run for Our Lives Warned by the Chorus to "beware the power of the Primes", Optimus charged back towards the battlefield and began attacking Trypticon, rescuing Victorion. Optimus led the Combiners in battle against Trypticon, but the Titan managed to hit him, sending him hurtling towards some sharp rubble. Thankfully, he was caught at the last moment by Fortress Maximus. In Good Hands
The first reissue of the original Optimus Prime toy in North America since the Generation 1 toyline reached its end, this "Commemorative Series" edition of the figure was a Toys R Us exclusive. It was mostly identical to the original figure, save for some necessary modifications made for safety reasons: In the first instance of what would become a recognizable alteration to the mold, the toy's smokestacks were shortened, while the Combat Deck's firing missiles were elongated to prevent potential choking, as was the case with all other Commemorative Series figures' firing missiles. This release also had the trailer's launching feature removed.
×