The G.I. Joe line of toys has always been the definition of "action figures," featuring moving joints, changeable outfits and ripped man-bodies underneath. If this all sounds a bit gay on paper than it should be noted that G.I. Joe figures are all armed with a vast array of weaponry. Also, if you ever suggest that Snake Eyes might be gay, make no mistake, you will be dead before you even see the movement in the darkness.
Like some other Legends/Legion Class toys, several of the loose units were dumped in some Hobby Shop dealers in Asia, although this one is very likely to be an identical knockoff of the toy. While the paint applications are pretty much identical to the real deal, the pegs on the legs/trunk front can be a little too tight when attached. in some worst cases; it can break off if attempted to pull off by force.
In The Transformers: Devastation, Hot Rod is repaired and reformatted into a Dodge Viper. Dealer tried to convince him to pull some strings to get him to Earth, but Hot Rod and Wheeljack had the more important task of rescuing Ironhide. They ran into a bit of trouble with the Machination's Headmasters. They managed to escape temporarily, but were found and Wheeljack was incapacitated. Hot Rod easily held his own with the Headmasters, and noted that for some reason they had lost their "edge". He received a little help from Hardhead, who was mainly there to take Hot Rod and the others back to the Ark-32 for evacuation to Garrus-9. Hot Rod refused to go, wanting to see the Headmaster mystery through to the end. Hardhead reluctantly let him go.
Available exclusively from Japanese clothing company A Bathing Ape in March 2013, "Convoy Reissue BAPE VERSION RED CAMO" (コンボイ復刻版 BAPE® VERSION RED CAMO) is a redeco of the original Optimus Prime toy sporting a unique new red color scheme, along with a red trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
During the May 30 launch event for the Revenge of the Fallen toyline in Japan, Legends Optimus were given out to attendees. The only difference is a sticker on the packaging commemorating the event. Optimus also saw release as a blindpacked figure for the first wave of the Revenge of the Fallen EZ Collection sets. And like all first waves, he comes with a flyer advertising the TakaraTomy releases of the Revenge of the Fallen toyline. His pair of legs is also mistranformed to fit in the bubble.
As the number of sets released has increased, the harder it has been for stores to parcel out their shelving space. In order to make more sales, decisions have to be made as to which sets will be carried. Not every store can carry the whole product line (not even all official LEGO stores carry the whole product line). This process will favor the sets that drive sales the most, such as the licensed sets. The traditional boxes of bricks are pushed out of the way for the more profitable lines.
When Robotmasters G1 Convoy was turned into a Lucky Draw figure, the color scheme into which he was redecoed was chosen through a children's coloring contest held in the pages of the December 2004 issue of TV Magazine. The winning entry was a... startling mixture of blue, orange and two shades of green, earning the toy the fan-appointed nickname of "Crayola Convoy". As with all Lucky Draws, it is extremely rare, with only ten units produced.

The first Unicron Trilogy Optimus Prime toy transforms into a longnose truck cab of made-up model. His clear-plastic smokestacks can detach and form a double-barrelled pistol that he can hold in robot mode, and a button on top of his head causes his mouthplate to jiggle up and down as if he were talking (the irony being that while this was a familiar trait of G1 cartoon Optimus Prime, in the Armada animated series, this Prime's mouthplate remained static when he talked). He can also hold a large cannon that is stored within his trailer, and his chest flips down to reveal a (non-removable) Matrix of Leadership. He is packaged with his Mini-Con partner Sparkplug.


When the narrative begins, we’re taken to Cybertron, where a narrator tells us of the battle between the Autobots and Decepticons, a war fueled by the Decepticons’ desire for total domination. We’re told, “The Autobots, on the verge of extinction, battled valiantly to survive.” Then, two Autobots in robot form climb out from under a grate, armed with a bunch of energy conductor sticks: Wheeljack and Bumblebee. Wheeljack transforms into a Cybertronian vehicle, then Bumblebee loads the sticks inside him. Bumblebee is so relatively small that he remains in robot form and hops inside Wheeljack for a ride, rather than transform himself.
The first Generation 2 Optimus Prime toy was largely identical in sculpt to the original Generation 1 figure release. While his cab robot retained his original red and blue color scheme, his trailer was recast in black, with the original blue and silver striped sticker replaced with a red and silver one displaying Optimus's name. On the first release of the trailer, the internal components and Roller matched the blue of the cab robot. Later, the internal components were changed to a lighter blue, as was Roller. Another running change followed, making the dark blue of the cab robot match this lighter shade. A bright yellow "Autobot" tampograph was also added to the back of his right leg.
Bumblebee - The Transformers live action film franchise's latest installment is out, with Bumblebee hitting theaters last week. The Seibertron.com Twincast / Podcast brings you its review of the movie, with one of its regular podcasters Jon Bailey bringing his insights after providing the voice acting talents for Soundwave and Shockwave in the film. Along with this insider perspective, the cast discusses each significant part of the movie itself, beginning with the "Generation One" inspired opening scene on Cybertron. The new human and robot characters presented in the Earth based adventures are also reflected on, with the cast agreeing that this latest movie is a measurable tonal departure from the approach of previous films in the franchise. After talking through the entire movie's plot and characterizations, speculation about what comes next for Travis Knight, Michael Bay, and the Transformers live action movies comes next. A quick chat about the movie's tie-in toyline follows, and the show concludes with a quick round of holiday season bragging rights about the cast's Transformers related gifts.
Entertainment Pack Optimus Prime is a slight redeco of the SDCC figure, with some deco differences between the SDCC release; this version has gray windows instead of blue and is missing some of the silver deco on the helmet and roof/feet, as well as the yellow paint on his lights. His midriff is also darker. Optimus also comes with a similarly-scaled Megatron and PVC figurines of Jack Darby, Miko Nakadai, and Raf Esquivel.
The figure's transformation scheme is based on the original G1 figure, the only differences being that the fists are not removed but become the headlights, and instead of flipping backwards inside the chest, Diablock Convoy's noggin flips forwards with the aid of sideways-opening windows, akin to Masterpiece Prime. A "laser rifle" in the shape of his ion cannon can be built from black bricks, and stickers bearing the Autobot faction symbol can be placed on Diablock Convoy's shoulders, although this is not recommended as it is designed to permanently stick to multiple tiles which dislodge easily and may damage the sticker.
This sculpt was redecoed from the Generation 2 Gobot Firecracker. The plastic colors are a "solid" version of Firecracker's color layout, substituting opaque red for transparent red plastic. It was redecoed again for the third wave of Go-Bots to become Sideswipe (who Prime really looks a lot like), and would later be used to created Robots in Disguise R.E.V..
He includes the Sword of Judgment and Sentinel Shield accessories, which he can respectively wield and mount on his left forearm, all via 6mm post. In truck mode, the sword is stored underneath, while the shield mounts onto the trailer hitch. The sword also features a 5mm post on its hilt. Interestingly, the truck mode is able to pull G1 Optimus Prime's trailer.
Based on Optimus Prime's Cybertronian form as seen in the Dreamwave comic book "The War Within", this version of Prime transforms into Cybertronian truck. The figure was personally designed by comic artist Don Figueroa, who created the original comic design in the first place, and his signature is left on the figure in the most literal way: the word "DON" can be seen sculpted into the barrel of his silver ion blaster.
A redeco of Legends Optimus Prime replacing his red plastic with more blue and silver, but sprucing things up a bit with red flame paint operations. Defender Optimus Prime (ディフェンダーオプティマスプライム) was only available in Japan as part of their Transformers Animated promotion in March 2010. It was given away for free to customers who purchased Animated merchandise at Edion, Bic Camera and Yodobashi Camera stores.

Part of the first wave of Prime: Robots in Disguise Weaponizer Class toys, Optimus Prime is a large toy, similar in size to Leader Class figures from previous Transformers toylines. He features a simpler transformation and design compared to previous Leader-sized figures, with him having fake chest windows (again) and a simplified, hollow truck rear where his feet, arms, and fake chest windows are plainly visible. He comes with a blaster which can mount onto his hands, shoulder-pads, and the sides of his legs/truck rear.
The smallest of the Energon Igniters, the 3-inch Speed series transforms between modes in 7 steps or less. Unlike previous small movie figures, this series has a lot of detailing and articulation. The bots don’t end up looking like carved blocks of plastic. They could use a few more paint apps, but that’s to be expected at this price point. They even interact with cores sold with the larger figures (though “interact” in this case seems to mean “tow behind”).
Leaving his home universe, the Optimus Prime of Primax 895.0 Gamma was gathered in Axiom Nexus by its Optimus Prime, along with a roster of other Optimus Primes and their kin in a group known as the Convoy, in which he was redubbed "Hero Prime". Optimus Prime bio in Club magazine #49 A multiversal cataclysm in a universe seeded with Rarified Energon and an invasion by natives from the negative polarity universe had called them into action. Since Matrix bearers were usually never allowed into Axiom Nexus, this was a grave threat indeed! Invasion Prologue
This release is another redeco of Cyberverse Optimus Prime, this time with a predominately navy scheme with black accents (which vaguely resembles his Generation 1 colors), and a pair of barrage cannons that can be either held or mounted on his smokestacks, as well as a pair of handheld swords. He is compatible with all his previously released Cyberverse accessories, but not all at once.
Reissued in 2003 as part of Takara's Transformers Collection line of reissues. This version (#13 in the Collection series) was retooled from the 2000/2002 Rodimus Major tooling in order to make the fists and engine block hole wide enough to equip Firebolt. In addition, the original 2 guns had their posts modified so that a Targetmaster Hot Rod could still use them, if the owner chose to.
In true Prime style, forward portion of the vehicle mode detaches to become Prime himself, while the rear "trailer" transforms into a gun emplacement. In robot mode, the barrel of the truck's left cannon detaches to become a hand-held rifle for Prime, and the figure features an opening chest compartment concealing a removable Matrix of Leadership accessory. Prime's gigantic hands mean that he can't hold it especially neatly, but he can certainly grip hold of it. Atypical of both most Unicron Trilogy figures and indeed, Optimus Primes in general, Prime's hands are not designed to accommodate weapons with 5mm posts, instead featuring a small peg-hole in his palm that allows him to tightly grip objects designed to fit there, like his own rifle, Leobreaker's whip, Cybertron Wing Saber's swords, and Cybertron Metroplex's axe. However Cybertron Wing Saber's sword hilts will also act as adaptors allowing Prime to hold and use 5mm weapons.
Calibur Optimus Prime is a retool of the Armor Knight Optimus Prime figure, who is a retool of the original Age of Extinction Leader Class figure, with the fifth wheel hitch now forming his handheld shield based on the one used in Dark of the Moon, which results in a backpack-less robot mode. He also comes with an axe based on the one used in the third film.
This figure was designed by Yūki Ōshima and produced by KT Figure Collection. The figure is actually a mini bust of Optimus Prime, which includes the head and the upper body without arms. The chest design comes with translucent blue windows and a grill on the midsection. There is also a button in the back. Pushing the button will open the chest and cause the Matrix to emerge, similar to the scene in The Transformers: The Movie.
Multiple reports suggest that the toy suffers from a design flaw, inferior plastic quality, or both: Due to his hands having peg-holes that are a bit too small to accommodate 5mm posts, they have a tendency to show stress marks on the inside after pegging his sword handle (or most other pegs) inside. Stress marks also tend to appear near his tiny hinged wrists. Fortunately, there have been no reports of the hands actually breaking on either location thus far.
Transported to a parallel Universe, as the walls of reality began to crumble, foretelling the coming of Unicron to the Armada universe, Optimus Prime and Jetfire were reformatted by their Mini-Con companions using the Mini-Con Matrix into new "Powerlinx" forms. Optimus Prime and Jetfire combined to hold the chaos-bringer at bay. Unicron was eventually defeated by the united power of the Mini-Cons.
A redeco of the Dark of the Moon Deluxe Class toy, this Optimus Prime has large portions of his body, mostly his truck parts, vacuum metallized silver, and his light-piped eyes were neutered by blue paint. He comes with a redeco of Generation 1 Rampage's sword, which can be wield by his 5mm-compatible hands (Although not shown in the instructions). As his body, legs, and front truck kibble were chromed, care must be taken while transforming, especially with the shoulder kibble & the bottom leg's posts (This can be amended if you slightly widen the holes with 3mm hand drills). As with the original Dark of the Moon Deluxe Class figure, the instructions did not mention about forming the sleeper part until step 10, the pinky finger prevented the sword to peg down through his hands, and of course: his truck mode can attach with the Armored Weapons Platform included in the Chronicle or the Movie Trilogy Series figure. This figure has slightly loose shoulder joints.
Optimus and his Autobots were aboard the Ark, on the run from the Decepticons. With him, Optimus had what Megatron was forever seeking; the AllSpark! With the ship taking heavy damage from the Autobots' pursuers, Optimus ordered Jazz to take them into an emergency quantum jump. Jazz informed Prime that the jump would take longer to initiate than the time the Decepticons would need to board their vessel. As such, Optimus entrusted the AllSpark to Bumblebee while he and the rest of the bridge crew steeled themselves to hold off their enemies. Thanks to Starscream breaking rank in the Decepticons' formation, Optimus was able to hold back Megatron, and with Heatwave's help, repel them from the ship just as it initiated the quantum jump. However, at that moment the AllSpark tumbled off-ship, falling into the quantum tunnel and seemingly being lost for good... Angry Birds Transformers #1
Part of the new Generations Cyber Battalion series, Optimus Prime is a new mold which stands 7 inches tall, and transforms from a truck (which is based on the Generations Thrilling 30 Legends Class Optimus Prime figure) into a robot in just 7 simple steps. The figure's transformation engineering had taken cues from the Reveal the Shield Legends Class Optimus Prime figure, while it still retains the same ol' articulation.
When they could not reanimate him, they used his body as a lure instead, bringing the Autobots to their lab, where they are infected. As this "Hate Plague" began to spread across the galaxy, Sky Lynx retrieved a Quintesson, who fully restored Optimus Prime to life. Coating himself in Morgan's heat-resistant alloy, Prime reclaimed the Matrix from Rodimus and unleashed its concentrated wisdom to destroy the Hate Plague.
Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is an extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation 1 and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
Part of a cross-promotion between Toyota and TakaraTomy, the deluxe-sized FJ Optimus Prime transforms into an FJ Cruiser, with his axe weapon becoming the vehicle's spare tire. The vehicle mode's body panels come packaged on the sprue, and can then be clipped onto the core figure. The mass retail release of FJ Optimus includes yellow and white panels, whilst further color variations were available when purchasing an FJ Cruiser at Japanese Toyota dealerships. As is typical of TakaraTomy exclusives, these variants came in grayscale packaging.

Part of the first wave of Bot Shots Series 2 launchers, this new-mold Optimus Prime transforms into a very boxy Generation 1-styled truck with trailer. As a Spin Shot, one manually winds up his upper body beforehand when transforming him into vehicle mode, where striking the front of the vehicle will cause him to burst open and spin while auto-transforming. He comes with a launcher used to propel him to great speeds, as well as four cube targets for him to knock over.
In Super Mode, Optimus Prime can combine with Leobreaker to form "Savage Claw Mode", which sees the feline Autobot become a gigantic clawed arm for his leader. Alternately, if Prime's backpack is removed, he can merge with Wing Saber into "Sonic Wing Mode", with the aerial ace forming a new winged backpack and chestplate for Optimus, and providing him with new hand-held sword weapons and firing missile launchers that connect to his Super Mode boots. The nature of the combination means that the two partners cannot combine with Prime at once—at least, not without physically removing one of Prime's own arms.
One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
Nonetheless, I remain a big fan of Lego and although I think they have somewhat moved away from their roots with the excess of licensed products (and the earlier licensed products were, in my opinion, not very good because they contained too many specialized non-generic pieces that weren’t useful for generic building. But that situation is improved and in particular we have found the Star Wars sets to be of most value for generic building, because they generally have very few really specialized pieces (although to be fair the sets are most useful for building other spaceships, etc).
×