Part of the first wave of Transformers: Robots in Disguise Hyperchange Heroes, Optimus Prime transforms from a futuristic trailer truck to robot in just 3 easy steps! His arms & legs serve as his trailer, while his chest serves as his truck front. He is also one of the few Robots in Disguise Optimus Prime toys which does not feature a faux window chest in robot mode. Both of his arms are articulated with 5mm holes in each hand.
With the acclaimed Studio Series line marching onward triumphantly into 2019, we have just received a new review of the line’s latest offering, Battle-Damaged Megatron, which most of us know emulates Megatron’s appearance following the climactic final showdown between him, Optimus Prime and the Fallen in the second film. The review comes courtesy of YouTuber PrimeVs.Prime, who has thus far extensively catalogued the line beyond today’s subject. He goes into detail regarding the detailing - Read More

On a version of Cybertron where Energon shortages have left many of the surviving Autobots and Decepticons all-but immobile, Hot Rod opted to be converted into a smaller and more efficient Micromaster, and thus retained his mobility. Detesting the corrupt system that has fallen into place, Hot Rod seeks to reform Cybertronian society from within the established government, while his former comrade Grimlock joined the resistance in an effort to bring down the old order. Feeling this approach to be no better than Megatron's rebellion that triggered the Great War, Hot Rod opposed Grimlock's efforts, particularly when his plans came to include using the G-Virus to turn a large number of "Builders" into immobile clones of Galvatron, unaware that the effects would also spread to a number of Maximals, Predacons, and Micromasters. Fortunately, Grimlock was betrayed by one of his own men, who destroyed most of the virus, though not before one Cybertronian was infected.


Categories: Art FeatherAstronBeelzeboss StudioBTS ToysCHMSDaCa ToysDMY StudiosDr. WuDream FactoryFansProjectFansToysGeneration ToyHeadrobotsHeerotoysmakerIGearImpossible ToysJunkion BlacksmithJustIToysKaziKOLDMaiden JapanMaketoysMastermind CreationsMasterShooter CollectiblesMech IDeasMGSPerfect EffectPlanet XPlay With This TooRenderformReprolabelsToyworldTransformersTFC ToysWarbotronX-TransbotsXovergenYom-GZenith Forge

After weeks of Decepticon silence, Optimus Prime decided to get proactive and sent out patrols all over the planet to try and flush the villains out. None of the patrols reported back with any success, however, and Prime realized that there was one area of the planet that his troops had deliberately ignored: the mysterious "Nebulos Triangle". Quickswitch, Scoop and Quickmix were sent into the Triangle, and they did indeed discover and foil the Decepticon plot going on in the area. Decepticons Underground
An undocumented aspect of his transformation is that his gun, which splits in two halves and secrets inside his kibble when transforming (much like Rattrap's) has two handle pegs on opposite sides, so that it can be held either at its far end or halfway along its length. The former position makes the weapon look (charitably) more like his traditional ion blaster—or Ultra Magnus' rifle. Additionally, the gun halves can be plugged together in two different ways, theoretically allowing you to create an infinitely long weapon (or at least one of ridiculous proportions).
In time-honored tradition, Prime's instructions depict the toy with an alternate "pretooled" head – in this case, a version with the faceplate deployed, used on the Platinum Edition and "Rusty" releases of the figure (see below). Additionally, his packaging stock photography depicts him with extra white/silver paint details, especially on his chest and wheel rims, as well as having gray upper arms with red details, among other differences.
This straight reissue of the original Optimus Prime figure was released in Hasbro's European markets in the early 1990s, at the same time as many other Generation 1 figures were being re-released as "Classics". Oddly, although he shares their golden packaging, Prime is not actually identified as a "Classics" figure anywhere on his box, but is generally considered to be part of the sub-line for simplicity's sake.

Categories: Character stubs missing fictionStubCharacter stubs missing video gamesAction MastersAlternity AutobotsArmada AutobotsAutobot leadersBeast Machines AutobotsBeast Wars AutobotsBeast Wars: Uprising AutobotsCloud AutobotsCombinersConvoysDimension hoppersDreamwave Generation 1 AutobotsEmperors of DestructionGeneration 1 AutobotsGeneration 2 AutobotsGeneration 2 Go-BotsGhostsGladiatorsGT charactersHall of Fame charactersHenkei! Henkei! AutobotsMatrix bearersMulti-component TransformersPowermastersPrimesRevenge of the Fallen AutobotsRulers of CybertronTransformers with three modesTransTech AutobotsUnited AutobotsZombies
Prime comes with all the accessories of his previous release, although his ever-changing ion blaster is now somewhat confusingly cast in blue plastic. He features one major additional accessory: an electronic display base sculpted with the image of the Matrix and the Autobot insignia. Pressing the insignia's crest triggers a series of electronic soundbytes, mostly quotes from the movie recited not by original actor Peter Cullen, but by Hasbro's in-house actor, Ron Hayden: "Autobots, transform and roll out!", "I want you to make a special run to Autobot City," "Megatron must be stopped!", "All we need is a little energon, and a lot of luck," and two samples of the classic transformation sound effect, one ascending, one descending.
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.
The character of Optimus Prime first appears in Transformers (film) as the leader of the Autobots in the search for the Allspark. After arriving and scanning a Peterbilt truck, Optimus greeted Sam Witwicky and Mikaela Banes, introducing his men and explaining why they had come to Earth. They escorted the humans back to Sam's house to retrieve the pair of glasses that would lead them the Allspark. When Sam and Mikaela were captured by a Sector 7 agent named Simmons, Optimus intercepted their car and surrounded the Sector 7 agents, curious that Simmons was not afraid or surprised by their appearance. When backup arrived, Optimus took the teens on his back and ran, taking cover under a bridge. Though Sam, Mikaela, and Bumblebee were captured, Optimus retrieved the glasses and prepared to lead his other men to get the Allspark, pointing out that, if it came to it, he would sacrifice himself by shoving the cube into his chest to prevent he Decepticons from getting control of the Allspark. When they discovered Bumblebee and the humans were free and being escorted by the military with the Allspark, Optimus joined their convoy. Along the way they, are attacked by Bonecrusher. Optimus engages him, killing him by using his Energon blade. Arriving in the city, he briefly confronted Megatron, but was left stunned. When he recovered, he rescued Sam as he was falling from a building and warned him that if he could not defeat Megatron before going into battle, he needed to place the Allspark in his chest. Optimus is nearly defeated by Megatron before Sam kills the Decepticon by ramming the Allspark into his chest. Optimus is grateful to Sam for saving him, and he and the other surviving Autobots decide to remain on Earth since Cybertron cannot be restored without the cube. The film ends with Optimus sending out a deep-space signal, inviting other Autobots to join them on Earth.
Of course, while Bumblebee does a lot of serious action in the films, tumbling and punching and kicking, you don’t see McFly doing a whole lot of that in the Back to the Future films. In fact, McFly doesn’t get up to too much more hard-core physical action, aside from some skateboarding and wailing on the guitar. Nevertheless, Fox does have a distinctly bowlegged gait, and you can see some of that in Bumblebee, and you can maybe see some Fox mannerisms in his more casual interactions with Sam Witwicky.
Optimus confronted his archenemy on the battlefield, though he had to knock Starscream aside to get to him first. Due to a nearby explosion that rocked the battlefield, Optimus nearly lost both his stance and his head when Megatron took advantage of the opening. But Optimus's quick reflexes allowed him to shift to vehicle mode and back, dodging Megatron's attack and striking back in the process. As the battle raged on, both combatants found themselves evenly matched. Then Ratchet contacted Optimus with dire news; the Decepticons had managed to abduct SARA! Fate
When animating the scene in which Primal removes Prime's spark, Mainframe's animators consulted The Transformers: The Movie for reference on the interior of Prime's chest. Not realizing the importance of the Matrix of Leadership, they rendered it as a container for Prime's spark. Beast Wars writers Larry DiTillio and Bob Forward have since claimed that in their view, Prime had not received the Matrix from Alpha Trion at this point, but a later comic produced for Botcon indicated that the Matrix was in fact stored in a secondary compartment, hidden behind Prime's spark. In this particular comic, the alien Vok used the Matrix, the Transmetal Driver, and a control suit once piloted by the Predacon Quickstrike to create Primal Prime.
Convoy iPod Docking Bay pulls an all-white trailer of similar proportions to his vintage G1 load, with rear wheels and discreet propping feet so it can also stand alone. The trailer transforms (sorta), by rotating a substantial wedge of its full length 90 degrees, kinda like a rectangular Rubik's Cube. This exposes two small speakers and "reveals" an alcove (although a huge gap is still clearly evident in trailer mode) featuring an electronic port in which to plug an iPod or iPod nano, thus becoming a working iPod dock. The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer.
Part of the fourth wave of Prime: Beast Hunters Cyberverse Commander Class toys, Beast Blade Optimus Prime is a jungle-themed green and blue redeco of his Series 3 Cyberverse Commander Class toy, coming with a new Battlewing Shield accessory in addition to retaining both the Thunder Lance and Star Saber. His shield can open up to form wings, and can be pegged onto the ridge on top of the vehicle's cage compartment, or mount onto the screw-hole on his, er, robot butt.
Part of the third wave of Prime Cyberverse Commander Class toys, Nightwatch Optimus Prime is a redeco of Series 2 Cyberverse Optimus Prime, using the faceplate-less head sculpt that is gang-molded with the original head. His blue plastic is now gray, his smokestacks and thighs are left unpainted, he loses the Autobot insignia on his right forearm/door, and he gains yellow paint highlights for his eyes and lights, along with various other minor deco differences. Instead of the original release's cannons, he now comes with a pair of swords, which each have a pair of 3mm posts for wielding/mounting.

After the Combiner Wars, Optimus watched the reconstruction efforts. Not wanting to overstay his welcome and preferring to leave Cybertron's leadership in its existing hands, he bid farewell to the Mistress of Flame and Windblade and departed for parts unknown. Aftermath and Rebirth On the way, he received a vision of future events from the Matrix and headed back towards Metroplex City. There, he met up with Megatron and told him of his vision, believing that the Combiner Wars and Trypticon's attack were signs of a greater threat, one that would lead to their ultimate destruction. Megatron laughed off his concerns, and the two parted ways. The Fight Begins


Naturally, Optimus Prime got the biggest of the sets in the first year of Kre-O. The set can be built into a large long-nose tractor-trailer rig with a removable "sleeper" cab that hides a computer station, and a trailer that can carry the set's two motorcycles or open up to carry larger car builds. The robot mode build includes a huge Optimus, based largely on the live-action movie Optimus, though with a head based almost directly on the Classics Voyager Optimus. He is armed with a distressingly plain brick that fires pressure-launched missiles (aka his smokestacks). Most of the leftover parts in robot mode become a "headquarters" which is mostly just a random assemblage of mismatched-color panels and a pair of barricades. Both main builds leave numerous parts unused if you go expressly by the instructions, but hey, it's a building kit, surely you can find someplace to apply most of them.

On Cybertron, Optimus Prime kicked back to do a little bit of paperwork and reminisce. With Shockwave defeated, Cybertron was enjoying a new era of peace. He was interrupted by Hot Rod, who reported that a group of "pesky humans with their peashooters" were giving an Autobot team on Earth a hard time. Prime suspected Cobra's involvement and counseled Hot Rod not to be so dismissive of the humans. The Art of War #1 When the team returned to Cybertron and mysteriously vanished in the Gladiator Zone, Prime was prepared to go search for them, but was convinced by Hot Rod to stay behind and organize a peace ceremony. The Art of War #2
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More
Hot Rod was then summoned to Earth by Optimus Prime, as revealed in The Transformers: Escalation. With typical bravado Hot Rod and Hardhead insisted on heading to assist Prime's unit in stopping Megatron. Hot Rod left Hardhead to assist the other Autobots while he captured the Decepticon facsimile. Unfortunately, he almost collided with Prowl, who had had the same idea. Despite some bickering between the two, they were able to eventually capture the facsimile, forcing the Russian troops to back down. When Hot Rod heard the battle between the Ore-13 powered Megatron and the rest of Prime's troops, Prowl forbade him from interfering, entrusting him with the safe return of the facsimile. Calling Nightbeat for transport out, he was jumped and severely damaged by Skywarp and Thundercracker. Nightbeat teleported him away, but Hot Rod had been badly damaged, and the facsimile reportedly killed.
Instead of his trailer, Prime can alternately combine with Armada Jetfire, who forms a pair of legs, as "Jet Prime" (Jet Optimus on the cartoon, or "Jet Convoy" if you own the Japanese version). In addition to this, Armada Overload can form a pair of massive cannons that attach to either Prime's base mode, or mount over the shoulders of his super robot torso (with either his trailer or Jetfire as legs), forming Optimus Prime Megaweapon (or Magna Convoy).
This Optimus Prime is a minor redeco of the One-Step Changer figure, omitting the paint apps on the knees, the flames on his shoulders, and changing the robot mode chest's deco. Along with his wavemate Bumblebee, Optimus Prime loses his pin on his leg, which is used to activate Stomp & Chomp Grimlock's pop-out weapons and gimmicks. As with the first wave of the Turbo Changers, Optimus features a nearly invisible tampograph on his vehicle front, which can be revealed with Mega Turbo Changer Dragonstorm's UV-powered Cyberfire gimmick.
The first Transformers toys were created from two different transforming robot toylines from Takara, the Car-Robots and Micro Change, from the Diaclone and Microman series, respectively. Hasbro acquired the rights to sell them in the United States but, instead of selling them under their original names, they were rebranded as "The Transformers". The first two years consisted primarily of reusing the Car-Robots/Micro Change molds. The earliest toys had some parts made of die-cast metal, which were eventually phased out.
In 1984, a volcanic eruption re-activated the Ark, which, in turn, brought the Transformers back on-line. Prime led the Autobots in their opening battles to prevent the Decepticons from plundering Earth's resources, but, following their initial victory, the Transformers were all deactivated by Shockwave. Shockwave killed Prime and leeched the energy of the Creation Matrix from his mind. He used this energy to give life to his creations, the Constructicons. Shockwave was unaware that the Matrix was not just a program in Prime's mind, but a physical object in his chest. Before Shockwave could give life to Jetfire, his next Decepticon, Prime transferred the Matrix energy into the mind of Buster Witwicky. Buster used the energy to turn Jetfire on Shockwave, allowing Prime to reclaim his body and retake leadership of the Autobots. As a reward, he gave Jetfire true life.
Best IDW Transformers Comics Stories - The IDW timeline/universe/story that started in 2005 has ended and I personally believe it includes the best Transformers fiction involving our favourite G1 characters. Of course comics can be daunting to get into and I won't pretend every single story was a gem. But there was some stellar storytelling here, the best these characters ever got and I will go through the 5 best stories from this 13 year run that any Transformers fan should check out asap. The titles link to the comics on comixology in case you want to check them out.

Towering at only barely over two inches, this was actually not just the smallest movie-verse Optimus but even the smallest transformable figure of Optimus Prime for a while - ironically enough, being even slightly tinier than the Smallest Transforming Transformers Optimus Prime - that is, until he was later "out-tinied" by two other cute super deformed versions.
Available exclusively from Japanese clothing company A Bathing Ape in July 2011, concurrently with a range of exclusive Transformers t-shirts, "Convoy Reissue BAPE Ver." (コンボイ復刻版 BAPE® Ver.) is a redeco of the original Optimus Prime toy sporting a unique new green color scheme, along with a tan trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese Optimus Prime packaging.
Battle Blades Optimus Prime is a brand new sculpt that attempts to replicate his Leader Class design. He is much more movie accurate than the previous Voyager incarnations. He features two energon swords made of soft plastic, similar to his Leader Class incarnation, albeit not spring-loaded. They can be detached from the mushroom joints they're on, although doing this excessively may cause them to warp.
Similar to the Activators toyline, One-Step Changer Optimus Prime features a spring-loaded transformation. He features swivel articulation in the head and both arms. He shares a similar (not identical) transformation with his fellow One-Step changer, Hound. Also, due to his transformation scheme, his shoulders can be pushed forward (the arms is pushed on the same time), which also allows him to wield a close ranged weapons with longer handles with both hands.
He comes with a shield with a fold-out handle, allowing Optimus to hold onto it with either hand in robot mode. It has a simple transformation gimmick for vehicle mode which is activated by pressing a button at the top of the shield, causing the sides to spring outwards. In vehicle mode, the shield can be laid flat across the bed of the truck, attaching via a post on the back onto the truck’s trailer hitch. Alternatively, the bumpers on the shield can be rotated outwards, and the front can be bent down in order to form a new front end and hood for "battle vehicle mode", resembling the Stealth Force vehicle modes seen in Dark of the Moon.
A non-transforming but highly articulated Optimus Prime action figure(ine), Revoltech Convoy uses the Revoltech "revolver joints" for maximum poseability. Convoy comes with a Matrix and ion blaster accessories, as well as a few alternate hands. His sculpting is explicitly in the style of Pat "serfdom" Lee's interpretation of Optimus Prime in the Dreamwave Generation One comics, but due to physical constraints has no lack of perspective.
He and Metroplex were soon rescued by Bumblebee and Ratchet and they promptly escaped back to Earth, just in time to rescue Grimlock from a Decepticon hit squad. After being misled by a phony distress call, Optimus and his team had to face an assault on the Ark. They repelled the Decepticon attack, but Prime decided that the time was right to go to Cybertron and liberate the Autobots whom Shockwave had enslaved. The Autobots again used the space bridge to reach Cybertron, and mounted an assault of their own on the Decepticon fortress. After fighting their way through the defenses, Optimus and Bumblebee faced down Shockwave himself, defeating the Decepticon with some help from Grimlock. Transformers G1: Awakening

Hasbro executives, high off the revival of G.I. Joe through the same marketing concept, decided to acquire rights to toys from a variety of Japanese “Super Robot” series. Transformers didn't introduce the concept of super robots to the United States, but for the first time, the genre became widely recognized and popular outside of Japan. As the Transformers brand grew throughout G1, it began to define the genre, and all other super robots were measured competitively to Transformers' standard.


In a rare move, there were no brick and mortar store exclusives in Western markets for the regular Prime line. The "Rust in Peace" special edition of Terrorcon Cliffjumper was available at San Diego Comic-Con and Hasbro Toy Shop, while the "Dark Energon" series of translucent redecos was sold by online retailer BigBadToyStore. All of the "Dark Energon" toys were available at general retail in Singapore and Malaysia, and the Voyager Class figures were also available at general retail in the Philippines.
Optimus Prime has appeared in numerous video games since the introduction of the Transformers series. He makes a cameo in the 1999 Beast Wars Transmetals video game for Nintendo 64, where he is killed by Megatron at the end of the campaign, showing what would have happened in the Beast Wars series with a Predacon victory. Prime is also one of the playable characters in the 2003 Japan-only Transformers game for the PlayStation 2 and the 2010 Transformers: War for Cybertron. Optimus Prime is also playable in the Hasbro Net Jet Transformers fighting game Transformers Battle Universe. Three versions of Optimus Prime are playable characters, including the first generation incarnation, his incarnations from the 2007 live-action film, and the incarnation from Transformers Animated. In this game, Optimus Primal is also a playable character. He is a regular character in the Nintendo GameCube and PlayStation 2 2003 fighting game DreamMix TV World Fighters. He appeared as a boss in a simple Flash-based video game on the Hasbro web site.[25]
This small version of Energon Optimus Prime was released by Kabaya as part of their DX Transformers line of candy toys. Prime transforms in the same manner as the larger Energon figures do, though his arms have to be removed at the shoulder and reinserted into his back to form truck mode. The Prime Force were sold in a separate set in the DX Transformers series, and can combine with Prime to form his Super Mode. Optimus came with a stick of gum.
MATTY COLLECTOR SPECIAL SALE If you missed out on the original Matty Collector figures, you’re in luck; many items are back in limited quantities! https://www.bigbadtoystore.com/Search?T ... geSize=100 ------------- NEW PREORDERS ------------- TRANSFORMERS STUDIO SERIES Reach past the big screen and build the ultimate Transformers collection with Studio Series figures, inspired by iconic movie scenes and designed with specs and details to reflect the Transformers movie - Read More
Commander class figures all come with translucent weaponry, and feature some amount of translucent plastic in their bodies (blue for Autobots, but a variety of colors for Decepticons), a feature designed around interacting with the line's vehicles (see below). Each vehicle is equipped with an "Energon Booster", a light-up accessory that can plug into the Commanders' weapons or into the posts and ports on the figures' backs to illuminate them with "glowing energon power".
This occurs in a Japanese toy line, animated series, and mobile video game called Q-Transformers. Specifically, the video game is called Q-Transformers: Mystery of Convoy Returns. Both Bumblebee and Optimus Prime are able to switch between their Generation 1 and movie modes in the series and game-- specifically Q-Transformers: Mystery of Convoy Returns. Strangely, though, when he’s in Generation 1 mode, he’s not a Volkswagen but another small, quirky car: a Daihatsu Copen. The show is pretty meta, with the characters being aware that they’re toys and they even talk about the Mystery of Convoy video game that they’re in.
According to the bio printed in the Transformers Collectors Club magazine, Optimus Prime was a member of the Cybertron Dimensional Patrol, but was abducted by Unicron. It is unknown whether he repainted himself yellow before being abducted or if the recoloration was due to the radiation emanating from Unicron, which has a tendency to recolor Cybertronians.
When the narrative begins, we’re taken to Cybertron, where a narrator tells us of the battle between the Autobots and Decepticons, a war fueled by the Decepticons’ desire for total domination. We’re told, “The Autobots, on the verge of extinction, battled valiantly to survive.” Then, two Autobots in robot form climb out from under a grate, armed with a bunch of energy conductor sticks: Wheeljack and Bumblebee. Wheeljack transforms into a Cybertronian vehicle, then Bumblebee loads the sticks inside him. Bumblebee is so relatively small that he remains in robot form and hops inside Wheeljack for a ride, rather than transform himself.

Multiple reports suggest that the toy suffers from a design flaw, inferior plastic quality, or both: Due to his hands having peg-holes that are a bit too small to accommodate 5mm posts, they have a tendency to show stress marks on the inside after pegging his sword handle (or most other pegs) inside. Stress marks also tend to appear near his tiny hinged wrists. Fortunately, there have been no reports of the hands actually breaking on either location thus far.

Rodimus appeared in the text-based fiction Dungeons & Dinobots as one of the Autobots who attacked the Arch-Ayr fuel dump. Sent to capture rogue Dinobots for the Autobots, he was part of the group that captured Swoop. Together with Blurr, he then tracked Grimlock, but ran into competition with the Decepticon allies Sideswipe and Cliffjumper. After Grimlock bit off his left hand Ratchet replaced it with a circular saw (a reference to one of the original Rodimus' melee weapons in The Transformers: The Movie).
This Japanese e-Hobby exclusive is a redeco of Targetmaster Kup, made to represent the character Orion Pax from the cartoon episode War Dawn. He transforms into a Cybertronic pickup-truck thing. His truck bed has a peg-hole to mount his partner Barrelroller, who also serves as a hand-held weapon. The set also came with a re-deco of Wheelie as Dion.
In "Transwarped", after Sari realizes that she is not human, Optimus attempts to have Professor Isaac Sumdac and Sari reconcile with each other. Later, they encounter Masterson, who is piloting his headmaster unit on Starscream's decapitated body. He defeats Masterson by tricking him to transform into vehicle mode, which was impossible due to with the Headmaster unit on Starscream's body. Later still, during a melee with a rock creature that found its way to Earth when Bumblebee returned from his accidental transwarp, Optimus struggles to stop Sari, who goes out of control after using her key to upgrade herself.
The original Optimus Prime toy was a re-deco of the Diaclone Battle Convoy toy and transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for driver figures part of the Diaclone line. His trailer opens up into his Combat Deck, which features a missile-armed repair drone pod (with seating for one) mounted upon a boom lift arm. Situated in the base of this boom is a spring-loaded launcher that can be used to launch Roller out of the Combat Deck. Roller himself has seating for 4 passengers, and can be equipped to carry Optimus Prime's rifle or a fuel pump. The interior space of the trailer allows storage room for one Autobot car. In robot mode, he is armed with a black laser rifle, that, due to design, cannot be held straight. His fists are separate pieces which must be stored elsewhere in vehicle mode; there are pegs to store them in the trailer.

Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[8] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[9]

Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .
The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
In a later scene, Hot Rod fled the city with Kup and the Dinobots when Galvatron, a recreated Megatron, attacked the city again, this time only smaller, after being reformatted by Unicron and taking revenge on Starscream. After meeting up with the other Autobots after a series of adventures on the planets Quintessa and Junk, Hot Rod returned to the other Autobots and rushed to Cybertron to save it from being eaten by Unicron. Facing Galvatron inside Unicron's body, Hot Rod was able to get his hands on the Autobot Matrix of Leadership in the confrontation, as the voice of Optimus Prime was heard saying, "Arise, Rodimus Prime". The power of the Matrix reformatted Hot Rod into Rodimus Prime, maturing him, giving him a larger body, deeper voice, and different vehicle mode. It also destroyed Unicron's body, bringing the events of the film to a close with Rodimus Prime as the new Autobot leader.
Optimus includes an spring-loaded missile firing "ion cannon" modeled after Megatron's shotgun from Dark of the Moon, with the missile features a sculpted shotgun nozzle on the front section. It can be held in his hand or attached to the top of the truck cab or truck bed via 5mm post, and, in an unadvertised feature, sports tabs on the rear-most handle that allow the Dark of the Moon Voyager Class Megatron toy to wield it. Also undocumented is the fact that the weapon can be stored under either of Optimus' shoulders.
The figure would have come in a monochrome version of the standard Henkei! Henkei! Convoy's packaging, still named "Convoy" but now labeled as part of the Gentei! Gentei range of exclusives.[8] Reportedly, this figure was intended as a Wonderfest exclusive, but was canceled because, according too TakaraTomy designer Shogo Hasui, it was too similar to Universe Nemesis Prime. Knockoffs were later made available, so buyers beware!
1.) MP 10 EVA. Its arguably the best mold of any figure, and that color scheme! 2.) MP 12 Lambor. My fav transformer aand my fav car as a kid, cant beat it. 3.) MP Grimlock. Robot mode just looks like be dominates the shelf, regardless of who be is next to. 4.) MP Exhaust, mostly bc of the novelty factor as he is a pain to get in the States, plus his back story is cool. If not for that, MP 11 Skywarp would take this spot. 5.) MP Soundwave w/ cassettes. Duh!

Later, at the peace celebration, Prime was watching a procession of Autobots when Decepticons attacked. Optimus ordered Omega Supreme into action but the huge Autobot was quickly overcome by Menasor, Piranacon and Predaking. The Art of War #3 Prime hopped into the fray, saved a civilian from getting smushed by the falling Omega, rode Sixshot into Piranacon's face, smashed Astrotrain into the ground, and carried a wounded civilian out of danger.
In some continuities, though, it’s our lovable pal Bee who takes the leadership reigns. In the animated series Transformers: Robots in Disguise, with Optimus having died at the end of the previous series, Bumblebee starts off as the Autobot leader, but he’s apprehensive about it. And he even takes the leadership mantle in the live-action film series; taking over for Optimus, who leaves the Autobots behind to head into space to search for the Seed at the end of the last movie, Age of Extinction.
Transformers: Energon introduced several new concepts to the toy line. Two new sub-groups, the Omnicons and Terrorcons, joined the fray, representing smaller factions of the Autobots and Decepticons respectively. The smaller toys in these sub-groups came with Energon weapons that could be used by the larger Autobots and Decepticons, along with Energon chips that could be fastened to the larger figures to enhance their power. Energon weapons and chips came in a variety of colors of translucent plastic. Many Autobot figures in the line were able to combine with a partner to form a larger robot through the "Powerlinx" process. The Decepticons were designed instead with alternative "attack modes". While no longer the focus of the line, there were several Mini-Con releases in Energon as well.
This retool of Revenge of the Fallen Leader-Class Optimus Prime features the head from Buster Optimus Prime and has had his blades replaced with semi-articulated Battle Hooks for face-destroying action! He has a darker paint job and sports black splotches on his body and head to signify battle damage. However, due to these extra "battle damage" paint applications, some other paint applications that were present on the Revenge of the Fallen release were omitted. He also sports a new voice box in robot mode, replacing the infamous "I am Optimus Prime!" with "We must stop the Decepticons!" The international release, however, retains the same abbreviated "Optimus Prime" sound clip as the original release. To the annoyance of many fans, this version was the main version released just about anywhere outside the United States (all of Canada, Latin America, Europe, and Asia). The box also mentions racing sounds, which may or may not be referring to the button-activated diesel engine noises carried over from the Revenge of the Fallen version of the figure.
A Deluxe sized version of Energon Optimus Prime. Looks like a smaller version of the Leader class toy, without any trailer or drones. Can Powerlinx with other Energon Autobot toys. This toy was a Toys-R-Us store exclusive in the U.S. and was packaged together with a downsized Energon Megatron. In Japan this toy was packaged together with Kicker and a Star Saber accessory.
I agree with Aidan but would expand on his point. It’s not just that the sets seemed bigger; they were. As the relative complexity of sets has increased, so too has the piece count, but there has been an overall decline in the size of the models due to increased build complexity and a corresponding reduction in size of the pieces required to create such detail. The negative affect on perceived value in this is apparent, though I would argue, misguided when one considers the build quality and detail of new and recent sets.
Each arm features flip-out blades that trigger when a button on the forearm is pressed. Each of these blades has a Cyberglyphic symbol on it. The blades severely restrict Prime's arm articulation when retracted, as they get in the way of the kibble, but as there is very little one can do with Prime's arms without causing the blades to deploy, this is hardly noticeable.

Categories: Articles in need of imagesUnreleased toysCharacter stubs missing toysAge of Extinction AutobotsBattle Masters AutobotsBumblebee AutobotsConstruct-Bots AutobotsCostco exclusivesDark of the Moon AutobotsKmart exclusivesMasterpieceMovie AutobotsNESTPlatinum EditionQ-Transformers charactersRevenge of the Fallen AutobotsSam's Club exclusivesStudio SeriesTarget exclusivesThe Last Knight AutobotsTitanium SeriesToys "R" Us exclusivesTransformers (2010) AutobotsTriple ChangersWal-Mart exclusives
Surprisingly, this was also the first Hasbro exclusive transforming Movie Optimus Prime figure to be based on the final design seen in Age of Extinction. He even features the forearms that Prime had before obtaining the Sword of Judgement, which unfortunately means that he is inaccurate to his appearance in the battle of Hong Kong and the entirety of The Last Knight. The sword's blade is still painted as the heated-up version from the concept art.
The cab transforms into the robot mode of Optimus Prime himself, with the addition of a pair of removable blue fists that plug into his headlights. The fists themselves do not store anywhere in vehicle mode, but can fit easily in Prime's opening chest compartment (originally designed to accommodate two Diaclone driver figures). Prime is armed with a black laser rifle that, due to design, he cannot hold straight.
×