The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco to Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.


Optimus was checking up on the Autobots' ongoing energy collecting campaign when Wheeljack informed him that a disturbance in Sector 33HM of space-time would eventually cause major problems in its time-stream. Optimus assigned the investigation of this disturbance to Bumblebee, then noted that Hot Rodimus had not completed his latest report, communications with the young Autobo having been lost while he was on his own mission. With a brief inspirational speech, he urged his subordinates to redouble their efforts in maintaining harmony throughout reality. Little did Optimus suspect that in his own universe, Megatron was planning a coup against the Autobots... Uprising
Arms Master Optimus's "Space Blaster Mode" is a mode designed for fighting in outer space, introduced in the Cybertron Satellite segment of "Infinite Transformation! Multiplying Enemies". He wears R.A. and Shining R.A. on his shoulders as wings, C.L. and C.L. GR on his back as thrusters, and B.H. and B.H. B on his feet as... more thrusters. His weapon of choice in this mode is the Matrix Blaster.
Standing only two-and-a-quarter inches tall, Smallest Transforming Transformers Optimus Prime was the smallest fully transforming G1 Optimus toy for a while, at least until the release of his chubby super-deformed Q-Transformers versions. He features an accurate transformation sequence based on the original full-sized toy, replacing the detachable hands with actual sculpted fists, and even including a tiny version of his laser rifle. Unsurprisingly, he also has little articulation and is only capable of moving his arms and legs.
General Optimus Prime hailed from Primax 096.0 Beta. Ask Vector Prime, 2015/09/06 During the third Cybertronian war, General Optimus Prime profile card he fought on Earth against Megatron: in the Battle of Sherman Dam, the two fought directly but the battle would have gone against the Autobots if not for the arrival of the Dinobots. Ask Vector Prime, 2015/09/06 In the latter stages of the war, he upgraded himself with heavier armor and weaponry in order to match Megatron's flight and combination upgrade.
Available exclusively from Japanese clothing company A Bathing Ape in 2014, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a green color scheme matching the Convoy Reissue BAPE Ver. of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
Marketed as a reissue of Powermaster Optimus Prime, this Toys R Us-exclusive Commemorative Series figure is in truth based on the Ginrai tooling on the toy that had previously been exclusive to Japan. It features a die-cast metal cab with translucent blue windows, and shortened, chrome smokestacks, and comes packaged with the drone Apex Bomber (formerly Ginrai's partner Godbomber), who splits into several components and combines with Prime to form "Apex Armor". As with all other Commemorative Series figures, Prime's new spring-loaded missile launcher featured an elongated missile.
The third United Optimus Prime toy is a redeco and slight retool of the Deluxe Class figure from Hasbro's 2010 Transformers toyline, itself an homage to Prime's Generation 2 "Laser" form. The toy features translucent blue plastic as opposed to Hasbro's orange, red paint is used on the biceps instead of blue paint, extra red paint applications on the knees like the original's sticker detail, and more broken-up red apps on the shoulders. Silver detailing was added to the cab mode on the grill, the bumper, and near the doors. The blue plastic in cab mode is now black plastic to make the figure more accurate to the Generation 2 original. The gray plastic is changed from the Hasbro version to more closely match the 2006 reissue of Laser Optimus Prime. Black paint was applied to the cab mode to mimic the fade from red to black on the original Laser Optimus, but still includes a flame deco like the Hasbro version, only in a different design. It lacks the roof-mounted rubsign of the Hasbro version, instead including Autobot insignias on the cab doors. (Disappointingly, they are Generation 1 insignias, rather than Generation 2 ones!) Additionally, a retool was made to the peg on the inside of his right shoulder, to make it shorter and wider than the Hasbro version, allowing it to move freely without hitting the torso, unlike the Hasbro release.

In "Reunification", Optimus is seen building his new ultimate weapon, Omega Doom. He learns that Megatron has supposedly been killed by watching a broadcast from the Autobot reporter Rook. When Kup leads the Autobots Camshaft, Hound, and Warpath, in an attempt to assassinate Optimus Prime, the Autobot leader easily defeats the four rebels. Alpha Trion then attempts to kill Optimus, but Optimus uses Omega Doom against the ancient robot. Prime then sends Doom against the Decepticons.

This figure was only available in a two-pack with a Voyager Class Grimlock figure. The two-pack was exclusively available at Target stores in the United States, Canada and Australia, at Tesco stores in the United Kingdom and Hungary and at Galeria Kaufhof department stores in Germany. In Asia, most of the remaining stock are available in some hobby shops and some video stores like Speedy Video.
The 1984 and 1985 toy lines contained several figures of note. Megatron, the Decepticon leader, originally transformed into a realistic Walther P38 pistol with stock and barrel extensions and scope. The Megatron toy was delayed till 1985 for release in the UK. The Constructicons were the first "gestalt" team in the Transformers line, but were different from most subsequent gestalt teams in that they consisted of six members instead of five. The Autobot Jetfire was repainted from a Macross toy, specifically the VF-1 Valkyrie, and the character was renamed Skyfire in the animated television series program for copyright reasons.
During the war, Optimus was killed in battle by Megatron, but was eventually resurrected. The Fight Begins Coming to the dire realization that the war against the Decepticons had become a never-ending arms race, Optimus Prime challenged Megatron to single-combat, with their troops acting as witnesses to their terrible and final clash. The battle between both faction leaders ended with Megatron beaten down and goading Optimus into delivering the kill shot...
Once again Optimus Prime and Megatron were re-engineered, with Prime now a fire truck and Megatron a six changer, whose modes included a dragon, bat, jet, land-craft and a giant hand. Another G1 character to get a new toy for this line was Ultra Magnus, who could combine with Optimus Prime to form Omega Prime. Other combiners were created for the series too, such as Landfill and Rail Racer. Bruticus, a combiner from G1 was also recoloured and introduced into the series, with a coinciding toy re-release. The Combaticons that formed Bruticus were the first of the Decepticons to be introduced into the show along with Scourge, who as a toy was a black repaint of G2 Laser Prime. These were not the only toys to be re-released for this series, with many from past lines being repainted and packaged in RID boxes. Robots In Disguise was responsible for introducing a lot of concepts that would be re-used often in the next incarnations of Transformers.
Although the animated series ended in the U.S. after The Rebirth, Optimus Prime continued to appear in animated sequences of Transformers toy commercials, progressing from Powermaster to Action Master. He even made an appearance as a computer-generated Combat Hero. Many episodes of the series were re-aired to promote Transformers: Generation 2. During these sequences, computer-generated scenes featuring key G1 characters are borrowed from Generation 2 commercials to serve as opening, closing, and commercial bumpers. Optimus Prime is shown in the opening and closing fighting Generation 2's Ramjet.
Available exclusively from Japanese clothing company A Bathing Ape in March 2013, "Convoy Reissue BAPE VERSION RED CAMO" (コンボイ復刻版 BAPE® VERSION RED CAMO) is a redeco of the original Optimus Prime toy sporting a unique new red color scheme, along with a red trailer decorated with a camouflage pattern. Both trailer and Prime himself feature the A Bathing Ape logo in place of an Autobot symbol, while the floor of the trailer's Combat Deck mode features new Bathing Ape-themed labels. The figure comes in a recolored version of the original Japanese packaging.
Virtually every toy in this list has a scannable insignia sticker on it. For Hasbro releases, it temporarily unlocks that toy as a playable character in the Robots in Disguise mobile game, and can only be scanned once per day. TakaraTomy releases simply check that off on their mobile app's collection list. It's honestly quicker and less redundant to say which toys don't have this feature. Meanwhile, scanning the Combiner Force toys' insignia stickers gives the player Tickets, which can be spent by giving them to Cryostase via the main map menu.
However, Prime was encouraged to keep fighting by the cheers of a human boy named Junpei. Megatron, surprised at Prime's resilience, attempted to finish his foe off with his Tornado Axe attack. Prime countered with his Double Wheel-Torque Mega-Ton, which trumped Megatron's attack and injured the Decepticon badly. Megatron teleported back to his ship and left Earth's atmosphere, vowing to return.
In the two-part episode "Megatron Rising", Optimus loses his composure over the recent numerous Decepticon attacks coupled with the fact that Prowl had secretly placed the Dinobots on an island off the coast of Detroit instead of destroying them. He has Ratchet confiscate the Allspark key from Sari, which he loses when he is ambushed by Blitzwing. Optimus also fails to stop a newly resurrected Megatron from acquiring the Allspark. He defeats Megatron by overloading the Allspark in his chest with Sari's key. In the process, the Allspark shatters into countless pieces, scattering all across Detroit.
The mold suffers from a minor design oversight, wherein the rear Nissan badge collides with his left leg strut when the left foot is hinged over and pegged into a clear plastic socket during transformation, with the results being that the connection is slightly crooked, isn't very secure, and sometimes pops off, and that the crooked pegging often causes the socket to crack.
The price per minifigure has definitely gone up in the past 5 years. You used to be able to get 4 minifigs (along with some other stuff) at the $9.99 price point, now these are $12.99. And there are fewer minifigs in most $19.99, $29.99, etc. sets now. Lego Minifigures Series 1 was $1.99 each, subsequent series $2.99 each – I know it’s supply and demand, but it still feels kind of exploitative. I admit the cleverness of the builds keeps improving though.

GT-R Prime was racing against GT-R Saber and GT-R Maximus when they were rudely interrupted by GT-R Megatron, a ruthless racer out to prove his worth by defeating all others. A fight broke out, but Prime interrupted it and convinced Megatron that they all shared the same need for speed, persuading him to settle things with a race instead. Transformers GT: Mission GT-R


Exclusive to LDH Shop, this redeco of the Music Label Convoy toy is utterly ridiculous and was created as a promotion for the Japanese pop band EXILE. While Convoy himself has EXILE written on his right forearm, his trailer sports the "Love Dream Happiness" tagline of LDH Inc.[1], as well as the "EXILE Perfect Year 2008" logo of the "EXILE Perfect Year 2008 Ultimate Best Box" boxset, which was released some months after he was.
Marissa and Prime are now on the run from the EDC and are also frequently attacked by the mysterious "Legion" Transformers. When faced with such foes, Marissa unleashes her "Kiss Player" ability by kissing Prime, fusing with him once again, increasing his power so that he can best their opponents. Prime is armed with the Surf Blade, a weapon formed out of Marissa's surfboard, wielded expertly thanks to the knife skills Marissa passes on to him when they merge.[18]

Optimus Prime comes with many accessories in addition to the aforementioned Matrix, including the character's traditional laser rifle, now termed (and henceforth known as) an ion blaster. The initial release of the figure cast the ion blaster in grey plastic, but later assortments recast it in its more familiar black coloration. Other accessories include a transparent orange energon-axe that plugs into either wrist when Prime's fist is retracted, and even a non-transforming gun mode Megatron weapon, with removable stock, silencer and scope accessories, in homage to several instances in the Generation 1 cartoon when Prime was forced to wield his enemy. Pack-in bonuses that came with the figure included an inner cardboard tray illustrated to resemble the interior of Prime's Combat Deck, and in later releases, a small poster drawn by Pat Lee.
Prime's firing missile and Mini-Con activated gimmicks remain accessible in this mode, but look a bit doofy if you deploy them. The initial Hasbro release of Prime had tabs in its Super Mode shoulders that prevented them from rotating above the horizontal default position, so as not to break the wires that run through the toy's right arm. Coupled with the limited elbow joints, this left Optimus Prime able only to point his weapons towards the ground, and the tabs were removed on subsequent editions of the figure.
When the warlord Shokaract, powered by Unicron's Dark Essence, traveled into the past to secure his own future, the occupants of J'nwan decided to act. Optimus Prime, Megatron, Soundwave, and Grimlock joined Sandstorm on prehistoric Earth during the time of the Beast Wars where the battle with Shokaract had already begun. When the Covenant arrived to vanquish the Dark Essence and defeat Shokaract, Optimus Prime and the others escaped through portals as that timeline was erased from existence. Terminus Departure

The "Unicron Trilogy" version of Optimus Prime is a fictional character of this branch of Transformers lore. Appearing in Transformers: Armada, Transformers: Energon and Transformers: Cybertron (known as the aforementioned trilogy), Optimus is the leader of the heroic Autobots. He often converted to his super combat mode. In all three series, Optimus' English voice actor is Garry Chalk, who previously voiced Optimus Primal in Beast Wars and Beast Machines.


General Hawk stated in an interview that his typical transportation in Axiom Nexus was his Convoy colleagues. As the seats of General Optimus Prime's vehicle mode were manufactured at the same location as the VAMPs of his universe, Hawk was able to find a degree of familiarity in the strange world of Axiom Nexus. Andromeda - Axiom Nexus News, 2016/05/01
Optimus and Prowl secretly guarded a shipment of microchips that could be used to imbue sentience onto robots. Posing as the lorry transporting the precious cargo across the Yorkshire Dales, he was attacked by Megatron and Rumble who sought the microchips to create an army of Decepticons. With your help, Optimus may or may not have been successful in keeping the microchips out of the Decepticons' hands. Highway Clash
A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
Two custom-made pieces (presented in robot and vehicle mode) by the Hasbro Transformers team as the grand prize for G4TV and Jumpcut's contest for fans to remix selected Transformers clips. Won by TFW2005.com member James Zahn, this one of a kind (well, two of a kind) piece is a almost fully vacuum-metallized Leader class Optimus Prime in red, silver and blue (based heavily upon Generation One Optimus Prime), presented with a custom display base with an embossed silver Autobot insignia and a perspex display case.
Epic Optimus Prime is a 22 inches tall, non-transforming Optimus Prime figure, featuring limited articulation in the waist, shoulders and wrists. His chest can be opened to reveal a command center with a seat and room to display at least three figures. His arms also feature one seat each to accommodate more figurines. The back of his arms and legs are hollow with "shelves" that allow even more figurines to be displayed.
Available in the Timelines "Generation 2" 2-pack alongside Sgt. Hound at BotCon 2015, General Optimus Prime is a redeco of Generations Voyager Class Roadbuster based on the cancelled Generation 2 General Optimus Prime toy. He transforms into an off-road vehicle and comes with numerous weapons, all of which peg via 5mm post onto his vehicle rear/legs, shoulders, upper & lower arms, and hands: a spring-loaded, missile-firing launcher, a pistol, a rifle, and two small cannons that respectively form the scope and stock of the rifle. All of his weapons can combine to form an unwieldy superweapon. It was unknown if this figure has the loose ratcheted shoulder joints from the Legends release of the mold.
In just seven years, from 1997 to 2004, the number of elements in the company’s inventory exploded, ascending from slightly more than 6,000 to more than 14,200. So did its range of colors, which climbed from the original six (red, yellow, blue, green, black, and white) to more than fifty. As the number of components and colors mounted, soaring supply and production costs plundered the company’s bottom line. Here’s why.
For all the positive aspects, these changes are not without their drawbacks. The LEGO community has been crying foul over the perceived decline in quality of the bricks5. While nowhere as bad as their competitor, any decline in quality reflects poorly on a company known for quality control. The LEGO group has been expanding its manufacturing base to places outside of Denmark, into Mexico, the Czech Republic, and China (although so far it seems only their “signature brand” non-set items are made in China). LEGO claims that this has not changed their dedication to the quality of standards by which they abide. However, it seems that the molds have changed to reduce plastic6.  Whether or not this affects the durability of the bricks is yet to be seen.

The all new 2006-2007 Classics line featured characters from the original series in updated forms. Hot Rod (now called Rodimus due to trademark reasons) was in the first wave of Autobots along with Optimus Prime and Bumblebee. Due to most of the Classics lacking visible Autobot and Decepticon insignias, this figure lacks the distinctive Autobot symbol seen on the chest of all other versions of Hot Rod/Rodimus, to which fan companies have responded to with alternative stickers. His vehicle mode is based on an obscure Japanese Supercar, the Dome Zero, manufactured by DOME Co. Ltd in 1978.[citation needed]
4. Collectability/Internet/Ebay: While Lego has always been a somewhat collectible product, the age of the internet has increased the collectability of Lego. Nostalgic adults came together on the internet to trackdown and re-acquire sets from their child hood. I think Lego has embraced this as evidenced by large limited edition sets aimed at the adult market. This is also evident in the increase in tempo of development of sets and themes that drive the collector to want to buy more and more; which overall is good for Lego. In the past, an individual set and theme seemed to have more life than they do now.

Hero Optimus Prime was the first new-mold Optimus Prime toy created for the Generation 2 line. He transforms into a Kenworth truck of unknown model which defies Optimus convention by being one continuous unit, rather than the traditional cab-and-trailer combo. Decals form the windows of a faux truck face to represent his chest, featuring both his name and what appears to be a life support readout coming alive towards the end. In addition to a small gun, he is armed with a large missile launcher, which can fire a rubber-tipped rocket by means of a bellows which you slam your fist down on to produce a puff of air. The launcher is accessible in both modes, ending up mounted on his right forearm in robot mode; the bellows is attached via a rubber hose and cannot be disconnected, but stores on the figures's back when not in use, as do the rockets. A similar air-launching system with identical missiles was used by the simultaneously-released Hero Megatron, and by Laser Optimus Prime the following year (see below).
QT-M Optimus Prime is a redeco of the GT-R Optimus Prime mold in the colors of the Transformers-sponsored Nissan GT-R used by the Team Mach racing team (a vehicle previously used as the base for non-toy character Mach Five Racing Prime). Like Transformers GT's Safety Prime, this toy was a collaboration with the Super GT racing series and was given away free to young children who attended TakaraTomy-sponsored "Kids Walk" events held by Super GT in the fall season of 2015.
Part of the first wave of Prime Series 2 Cyberverse Commander Class toys, Optimus Prime is a smaller-scale toy, and features translucent plastic for his torso so that the toy can be illuminated using the electronic lights featured in the larger playsets. He comes with two translucent "battle cannon" weapons which feature multiple 3mm posts and ports, allowing them to be held by his hands, or store/mount onto numerous ports on his person. Additionally, he features a 5mm port for a trailer hitch.
This unusual iteration of Optimus Prime is a redeco of Beast Wars 10th Anniversary Optimus Primal, transforming into a robotic gorilla in the pseudo-technorganic-looking style of the other Jungle Planet toys. He comes with a Jungle Planet Cyber Key stamped with the code d7s9, which plugs into his flying surfboard accessory to reveal a spring-loaded missile launcher. His brown and cream deco seems inspired by Donkey Kong, while the scar over his beast mode eye seems intended to homage Peter Jackson's King Kong.
While exploring Cybertron's hemisphere of darkness, Optimus Prime became severly damaged, and unable to return to the hemisphere of light. Having been able to send out one last message before his memory was badly damaged, Optimus found himself unable to distinguish friend from foe, and would join (or rejoin) whichever faction found him first. Optimus Prime Is Back
The "Unicron Trilogy" version of Optimus Prime is a fictional character of this branch of Transformers lore. Appearing in Transformers: Armada, Transformers: Energon and Transformers: Cybertron (known as the aforementioned trilogy), Optimus is the leader of the heroic Autobots. He often converted to his super combat mode. In all three series, Optimus' English voice actor is Gary Chalk, who previously voiced Optimus Primal in Beast Wars and Beast Machines.

Unite for the Universe Optimus Prime would have been a redeco of the 2007 Optimus Prime Voyager-Class mold in a similar style to the Leader-Class Buster Optimus Prime (see below), with a much more accurate and detailed paint scheme, including white stenciled flames. He would have come with a set of Jetfire armour parts to form the powered-up Optimus Prime seen at end of Revenge of the Fallen, and due to not having to form Jetfire's robot mode or his jet mode, the armour parts are far more accurate to the movie's design of them than the leader class Jetfire toy could manage. While not combined to Optimus Prime, the armour can be arranged to form a sort of weapon emplacement mode or a jet engine on the back of Optimus's vehicle mode.
One of the Mini-Con limb-bots (Soundwave helmet) is based on the original movie version of Optimus. The main torso-bot is based on Generation 1 Optimus's original body. Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). And the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
Late in 2008, this version of Optimus prime was one of four Classics figures repainted into HasbroToyShop.com exclusives (the other three being the Megatron from this set in G1 colors, Grimlock repainted into Overkill, and Mirage repainted into Dragstrip). Unlike those three, it's debatable just how much repainting went into Optimus, but he comes in a snazzy new box.
After his attack on Optimus Prime, Megatron was thrown out of the Ark when Blackarachnia activated the ship's defense systems. However, he was not thrown far enough and the Predacon managed to reenter the Ark and blast the Autobot leader, decisively erasing the Maximals from the timeline. A Change to the Agenda This had the effect of producing a wildly different timeline.

Prime comes with all the accessories of his previous release, although his ever-changing ion blaster is now somewhat confusingly cast in blue plastic. He features one major additional accessory: an electronic display base sculpted with the image of the Matrix and the Autobot insignia. Pressing the insignia's crest triggers a series of electronic soundbytes, mostly quotes from the movie recited not by original actor Peter Cullen, but by Hasbro's in-house actor, Ron Hayden: "Autobots, transform and roll out!", "I want you to make a special run to Autobot City," "Megatron must be stopped!", "All we need is a little energon, and a lot of luck," and two samples of the classic transformation sound effect, one ascending, one descending.
This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.

Hot Rod was then summoned to Earth by Optimus Prime, as revealed in The Transformers: Escalation. With typical bravado Hot Rod and Hardhead insisted on heading to assist Prime's unit in stopping Megatron. Hot Rod left Hardhead to assist the other Autobots while he captured the Decepticon facsimile. Unfortunately, he almost collided with Prowl, who had had the same idea. Despite some bickering between the two, they were able to eventually capture the facsimile, forcing the Russian troops to back down. When Hot Rod heard the battle between the Ore-13 powered Megatron and the rest of Prime's troops, Prowl forbade him from interfering, entrusting him with the safe return of the facsimile. Calling Nightbeat for transport out, he was jumped and severely damaged by Skywarp and Thundercracker. Nightbeat teleported him away, but Hot Rod had been badly damaged, and the facsimile reportedly killed.


If Optimus ordered his troops to come to the humans’ aid, they found themselves taking part in a struggle in futility, as the entire town was near-weightless, meaning they couldn’t put the humans anywhere where they wouldn’t float away once more. Then, the Autobots heard Decepticons approaching. Helpless in their current position, the Autobots were quickly eradicated by the Decepticons.
×