The mid-range Voyager class Movie Optimus Prime toy transforms into an amalgamation of the Kenworth W900 and the Peterbilt 379, making this toy fairly inaccurate to the actual vehicle Optimus Prime turned into. Because of the smaller size and lessened complexity, the Voyager class Optimus Prime features a significantly different transformation sequence compared to the Leader class toy, and indeed, the actual CGI design. However, as the actual truck cabin no longer forms his chest, the cabin now features a small interior with opening doors and a non-removable cowboy-hat-bedecked driver figurine that flips out of the seat when the driver's side door is opened.
The main difference is an extensive redeco, rendering Prime in his traditional colours instead of the iPod-inspired white. (Yes, it actually had more to do with iPods than Magnus, believe it or not.) Reminiscent of the Kiss Players, iPod Optimus Prime's entire ABS/PVC structure is painted over, including his fists and the silver stripe that runs along his chest. His wind shield is colored blue like the one in the 2002 New Years Convoy reissue. The silver-grey trailer has a fairly elaborate deco, featuring detailing that resembles the outward appearance of the traditional Prime trailer, including the doglegging blue stripe and Autobot symbol, an effect somewhat marred by the large, visible gap on one side. When reconfigured into dock mode, the interior surfaces surrounding the speakers are decorated with black-on-silver techno-patterns as well as three, count 'em, three logos proclaiming the name "Optimus Prime". The recessed space also features a stylised, almost Frank Milleresque, high-contrast portrait of Prime's face, although this would be largely covered by the intended insertion of an iPod.

This figure was made available again, without any changes, in 2015, this time in new packaging resembling the then-concurrent packaging design for the Generations line, but replacing the name "Generations" with "Authentic Transformers". It was also given a new Hasbro product code number and UPC barcode, thereby technically making it a separate product. In 2017, it was re-released again, this time in a minor variant of the 2014 version's packaging (including the original product code number and barcode) that now lacked the reference to the non-existing "Reveal the Shield" gimmick.
Smallest Transforming Transformers Convoy is the smallest fully transforming Optimus Prime toy yet. He features an accurate transformation sequence based on the original full-sized toy, but understandably has no detachable hands, and has little articulation. His sculpt is based upon his cartoon appearances. He comes with a tiny version of his laser rifle.
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.
A Mega Super Collection Figure of Prime in his "normal mode" was released a few months after the first figure. He came with a translucent blue Star Saber, and a much larger version of the Convoy Gun accessory, creating a sense of comparative scale, even though he's the same height as the Super Mode figure. Like the Super Mode figure, only his right fist has a peg-hole in it, so he can't hold both weapons at once.
One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
On a version of Cybertron where Energon shortages have left many of the surviving Autobots and Decepticons all-but immobile, Hot Rod opted to be converted into a smaller and more efficient Micromaster, and thus retained his mobility. Detesting the corrupt system that has fallen into place, Hot Rod seeks to reform Cybertronian society from within the established government, while his former comrade Grimlock joined the resistance in an effort to bring down the old order. Feeling this approach to be no better than Megatron's rebellion that triggered the Great War, Hot Rod opposed Grimlock's efforts, particularly when his plans came to include using the G-Virus to turn a large number of "Builders" into immobile clones of Galvatron, unaware that the effects would also spread to a number of Maximals, Predacons, and Micromasters. Fortunately, Grimlock was betrayed by one of his own men, who destroyed most of the virus, though not before one Cybertronian was infected.
Transformers Siege Greenlight will be released sooner than later, especially compared to exclusives from previous years. We have our first preorder up on Amazon.ca revealing two important points: who the exclusive retailer is and what the price point will be. Now we know that it will be an Amazon exclusive. While we only know for sure that this will be the case in Canada, it stands to reason that it will be an Amazon exclusive elsewhere to, which is great news since those are always the - Read More
Prime's trailer opens up into his Combat Deck, containing the scout drone, Roller. The interior of the Combat Deck features three pegs that can accommodate Prime's laser rifle, fuel pump and nozzle accessories, and seating for two Diaclone drivers. As its central feature, the Combat Deck features a missile-armed repair drone pod mounted upon a boom lift arm (featuring another cockpit for a Diaclone driver), which can also be extended through holes in the trailer's roof and front-end when it is closed. Situated in the base of the boom arm is a spring-loaded launcher that can launch Roller out of the Combat Deck and into action. Roller himself has seating for four Diaclone passengers, and features a port that can accommodate either Prime's rifle or the fuel pump. The interior space of the trailer allows storage room for one standard Autobot car, which can also be shot forward by the launcher.

Once combined, DaiKenzan has three new phrases (spoken in Kenzan's voice), while DaiGekisou has four (in Gekisoumaru's voice). In either combined form, pressing and holding the button activates an additional, longer phrase for their "final attack". DaiGekisou is armed with a scissors-esque "shuriken" made from combining Optimus Exprime's two swords, while DaiKenzan simply wields them separately.
Exclusive to Japanese ToysЯUs stores, this redeco of AM-01 Optimus features warmer, metallic shades of plastic, replaces the gray plastic around his windshield-chest with red, and replaces the clear-blue plastics with clear-black. He comes with the Hasbro version's battle sword, which is now a darker, warmer shade. For Arms Microns, he now comes with O.P. A, Pral G, Sais G, and Jayz G, and the latter three can combine to form a golden version of the Cosmotector shield (hence the name).
Optimus was one of the many soldiers fighting under the command of the Autobot leader, Jetfire. He was among the Autobots who launched in the Ark to clear a path through an asteroid belt. When the Decepticons attacked the ship, he fought a Seeker Decepticon while Jetfire sent the Ark crashing into Earth, knocking everyone aboard offline. Four million years later, they were repaired when the ship's systems were reactivated by a volcanic eruption. In the Transformers
Tomica Optimus Prime is a die-cast non-transforming toy of his truck mode from Prime. It was sold as part of the "Dream Tomica Series", a subline featuring exclusively fictional vehicles. Like all Tomica toys & all Generation 2 GoBots and Spychangers, Optimus Prime features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces. However, they do not convert into robot mode.
Transformers: Energon introduced several new concepts to the toy line. Two new sub-groups, the Omnicons and Terrorcons, joined the fray, representing smaller factions of the Autobots and Decepticons respectively. The smaller toys in these sub-groups came with Energon weapons that could be used by the larger Autobots and Decepticons, along with Energon chips that could be fastened to the larger figures to enhance their power. Energon weapons and chips came in a variety of colors of translucent plastic. Many Autobot figures in the line were able to combine with a partner to form a larger robot through the "Powerlinx" process. The Decepticons were designed instead with alternative "attack modes". While no longer the focus of the line, there were several Mini-Con releases in Energon as well.
The original Ultra Magnus figure has been reissued and redecoed several times down the years, and this article strives to list each edition of the figure under its own heading. The first alteration to Magnus, however, was a running change made while he was still on shelves: Originally, his tires were made of rubber and he sported paint on both his small and large robot heads, but this version was soon replaced with one featuring plastic tires and no paint on either head. In addition, the clear yellow plastic that formed his windows was removed from the cab, leaving just holes instead; and his thighs and fuel tanks were left white, as opposed to the vacuum metalized chrome ones of the original release.
When Jazz brought Steve Guymo to the Autobot base, Optimus and the other Autobots realized that the Decepticons were behind the abduction of humans from airports across the nation. They were able to find the captive humans, whom the Decepticons were intending to ransom to the US government, and free them before engaging Starscream and his squad in battle. With the Decepticons defeated, the Autobots returned to base where Optimus thanked Steve for his help. Sun Raid (Listen 'n Play)
The Autobots helped repair a Smitco Oil Refinery site which the Lazarus-controlled Transformers had attacked. Optimus had no answer for Spikes accusation that the Transformers' presence on Earth was responsible for the destruction. When Megatron's activities at Lazarus's base were spotted by the military, Optimus insisted on the Autobots going in without backup. They discovered Megatron in the middle of a plan to reformat Earth into a new Cybertron using a cyber-virus. Optimus rejected Megatron's suggestion he should just let it happen, but while the two factions fought, the human military unleashed Operation Clean-Up, dropping a bomb on them. Prime Directive #3
This set is a ToysЯUs Japan exclusive, consisting of Powerlinx Optimus Prime (dubbed "Convoy Final Battle Coloration" and redecoed with more show-accurate colours, principally a silver mouthplate instead of red and varying color saturation from the Hasbro version), a "crystal" version of Overload ("Ultra Magnus Special Clear Version") made out of transluscent plastics, and an exclusive X-Dimension redeco of the Street Action Mini-Con Team. This set is entirely "new" content not available in the normal mass-retail Micron Legend line, and is also the last release of "X-Dimension" Mini-Cons. Rather than come with individual bio cards for the various characters, the set came with only a single card for Magna Convoy.
The second Nightwatch Optimus Prime was released as part of the "AllSpark Power" second half of the Movie line. He is similar to the UK version of Nightwatch Prime, replacing most of his red and blue with different shades of blue and black, retaining his resemblance to Diaclone Powered Convoy in most respects. However, the subdued black and copper on the first Nightwatch Prime have been replaced with gold and a very bright blue, to signify the All Spark energy affecting the Transformers.
"Cybertron Optimus Prime" new features a darker grey plastic, and mostly shares the same paint mask to the original Deluxe class figure, with added paint details on his head and the mesh-like pattern on the front of his "entry" mode. The silver paint on his chest was slightly changed from the original and he lacks the paint on his feet, his "headlights", and the top of his "entry" mode. Lastly, he features Cyberglyphics on his vehicle mode windows, and the rear sides of the vehicle. His flame attachment is now cast in translucent red plastic with orange sprays.
Optimus Prime is another redeco of Revenge of the Fallen Legends Class Optimus Prime, features gunmetal-stque grey plastic, and his paint operations being similar to the first Revenge of the Fallen Legends Class toy. He is also packaged with Grimlock, himself a redeco of none other than Energon Cruellock. Like other Legion-themed product, he is exclusive to Walmart in the US and Asda in the UK.
2. Piece diversity: Today the total range of piece types and the number of new piece types introduced every year has skyrocketed since the decade of the 80s. As a kid, the new pieces introduced every year were indeed one of the great answers to my parents’ pleas of “don’t you already have ENOUGH Legos?!?!” However, the quantity of new piece types again coupled with the broad color diversity again requires much more Lego to be purchased to attain that “critical mass”.
Oddly, he had a different plate in those films when in car mode: 900 STRA. In Dark of the Moon, they finally decided to keep his robot and car mode plates consistent. In robot mode in the Dark of the Moon and Revenge of the Fallen video games, he wears 5BBM2. 5LKZ213 was seen in some set photos of robot mode for the first film. Various models for promotional exhibits have featured KDM 0814, FXPERTS, and, of course, BUMBLBE.
A non-transforming model kit of Optimus Prime by Takara Tomy, sold exclusively in Japan. The kit comes with a pre-assembled inner frame that features a high rate of poseability similar to Master Grade Gundam model kits. The kit comes with two swords and two different sets of attachments for them: one set for the forearms and the other to replace the hands. Pre-ordered units of the first batch came with battle hooks.[138]
With the major threats taken care of, Optimus Prime turned his and the Autobots' attention to identifying and shutting down the rogue projects taking place across Earth using stolen Binaltech technology and secrets. It was during one of these missions that Optimus Prime faced off against Nemesis Prime, both in Binaltech Dodge Ram forms. Initially, things looked bad for Optimus Prime, as he was no match for his opponent's spectral armor. However, the Protector merged with Prime, and the enormous power that resulted allowed Prime to reflect Nemesis Prime's final attack, obliterating the evil Decepticon. Optimus Prime recalls the union of the two sparks being familiar, from an event in the distant past. Optimus Prime is reassured by the Protector about "the seeds of the future" and the Protector is revealed to be Optimus Primal.
How to Say Expensive and Mean It - The Seibertron.com Twincast / Podcast reaches episode #213, and the discussion begins with Takara Tomy's upcoming Masterpiece MP-44 Optimus Prime version 3. This toy has a substantial price tag that has caused controversy amongst Transformers fans. In-hand impressions of Transformers Generations War for Cybertron: Siege figures come next, with analysis starting for Deluxe Class figures Sideswipe, Hound, Cog, and Skytread/Flywheels. After that, Micromasters from the Race Car, Battle, and Air Strike Patrols get a look. Weaponizers Lionizer, Blowpipe, and Firedrive come next before the Generations discussion concludes with Voyager Class Megatron and Optimus Prime. A look at the upcoming Generations Select releases of Ricochet and Red Swoop is followed by a quick examination of the recently released Transformers: Botbots lineup. The endings of the long-running IDW Transformers comics continuity comes next, with the end of event book Unicron occurring first. Optimus Prime's namesake series is talked about next before the comics discussion concludes with Lost Light's finale. Bragging Rights close out another episode with early holiday season sales driving the cast's recent purchases.

Part of the first wave of the "Mini-Con Weaponizers" subline imprint, this One-Step Changer figure of Optimus Prime is a new sculpt. In the Robots in Disguise mobile game, it was identified alternatively as an "Advanced One-Step" or "Evolved One-Step" figure depending on the user's region, but on the toy's packaging, no such modifiers are featured, and it is available as part of the regular One-Step Changer assortment. This figure shares most of its engineering with One-Step Fracture.
In "Transwarped", after Sari realizes that she is not human, Optimus attempts to have Professor Isaac Sumdac and Sari reconcile with each other. Later, they encounter Masterson, who is piloting his headmaster unit on Starscream's decapitated body. He defeats Masterson by tricking him to transform into vehicle mode, which was impossible due to with the Headmaster unit on Starscream's body. Later still, during a melee with a rock creature that found its way to Earth when Bumblebee returned from his accidental transwarp, Optimus struggles to stop Sari, who goes out of control after using her key to upgrade herself.
This reissue of the original Generation 1 Optimus Prime figure comes in a two-pack with the Deluxe-Class Dark of the Moon Optimus Prime figure. Prime himself is almost identical to the Encore release, save for his trailer hitch which was retooled to allow a peg to be inserted within it while still being able to be inserted into the trailer itself (making it compatible with his G1 trailer and the new trailer included). Like the Encore release, he features lighter colors and tampographed shoulder symbols (which vary slightly from the Encore release).
Battle Blades Optimus Prime is a brand new sculpt that attempts to replicate his Leader Class design. He is much more movie accurate than the previous Voyager incarnations. He features two energon swords made of soft plastic, similar to his Leader Class incarnation, albeit not spring-loaded. They can be detached from the mushroom joints they're on, although doing this excessively may cause them to warp.
When Ultra Magnus, Rodimus, Arcee, and Spike took cover within the Autobot Mausoleum, retreating from an attack led by Galvatron, they found Optimus having risen from the dead! Rodimus returned the Matrix of Leadership to Optimus, only for Optimus to abandon his Autobots, and flee back to Cybertron. Optimus, it seems, has returned to the world of the living changed. Once on Cybertron, Optimus orders a full-scale assault on the Quintesson base. Thankfully, Optimus managed to come to his senses when his memories of being revived by the Quintessons reemerged. After returning the Matrix to Hot Rod and ordering the Autobots to retreat, sacrificed himself once more by guiding the ship he's piloting into the Quintesson's trap. Dark Awakening

Every two weeks, Seibertron.com brings you a Top 5 list related to all things Transformers written by me, your fellow editor. These are our opinions so what matters most is what you guys think of the topic or list, and I hope to see your own lists or comments on omissions and ranking. Let's have fun! All previous lists can be found here. Top 5 Best Cliffjumper toys With Cliffjumper having a surprise appearance in the Bumblebee movie I figured we were due for a rundown of the best - Read More


The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
In 1986 the Transformers animated movie had been released, and during the run of the movie, through a pamphlet that came with certain figures, you could order certain Transformers through the mail, such as Optimus Prime among other toys. The toys came in a standard brown mailer box, with items, booklet, and a limited Edition Movie certificate and sticker.
While I don’t think anyone should complain about the price of Lego, I have to say that I don’t think our nostalgia for the 80s/90s is at all misplaced -it really was a better time to be a yuppy/young parent. There were more and better jobs available with better pay, benefits, and less required prerequisites. Young adults today have to work a lot harder to maintain the same lifestyle our parents had..of course there are exceptions, if you are especially gifted you can still make it in today’s world.

I had a transformers armada (ew) style Megatron with horns like a stag beetle that would turn into a tank. I actually liked the whole design and was upset when my sis broke it on purpose. She'd always tell on me for stupid shit so I saved this incident as a trap card for later. Too bad this sort of thing had a statute of limitations in our house lmao.
The stickers may not be cut right, my copy has them off-center, they're probably using an 80's type bladed stamp with little QC to rush them out. The cab will not have the stripes applied, those are included on a strip of mylar/foil/whatever silver but you have to measure and cut them to fit. Every KO can be identified easily by these missing stickers in the box. Older releases also had the trailer's stickers separate but those have not been made in some time.
A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.[61]
Distant Thunder was ultimately unsuccessful, but as the universe started to rip apart, a black Optimus Prime clone appeared. The Binaltech universe was split into its own separate continuity, while the original timeline was also restored, stabilizing the multiverse. The clone, friendly to the transformers, proclaimed that the Binaltech universe must be allowed to continue, as it was important to the future. Optimus Prime questioned the black doppelganger, who explained only that he carried "the Protector's" spark, but refused to reveal any more detailed information. Soon after, the clone, who was originally developed by Dr. Archeville as a weapon of evil, ejected the spark that had invaded and taken over the black figure, reverting to its original evil programming. The malevolent Nemesis Prime, no longer just a black version of Optimus, escaped.
Realizing that the planet is dying, Optimus orders a mass evacuation of all Autobot cities, but many transport ships are destroyed by the Decepticon satellite Trypticon, under orders from Megatron that no one shall leave the planet. He orders the Aerialbots Jetfire, Silverbolt and Air Raid to fly and destroy Trypticon. The aerial trio manages to destroy Trypticon's jet pack and send the Decepticon behemoth crashing into Cybertron, where Optimus Prime and the Autobots band together to narrowly defeat him, sending him plunging into a pool of raw energon. Optimus and the remaining Autobots volunteer to stay and defend Cybertron from Megatron for as long as possible while the rest evacuate the planet. He commissions a massive vessel known as "the Ark" to transport the remaining Autobots into space when the time comes.
A movie tie-in game for the sequel to the 2011 movie Transformers: Dark of the Moon was released a few weeks prior to the movie on June 14, 2011 (the movie is set to be first screened on July 1, 2011). It has similar gameplay and features as that of the War for Cybertron game as it's made by the same developers, High Moon Studios. The game takes place on Earth just two years after the events of Revenge of the Fallen and will focus on both factions in their "final battle". Adjustments to the previous concept of the game had been made, including the online multiplayer where you can customize iconic characters appearance, abilities and weapons rather than the unknown transformers that were in the game prior to this one by High Moon Studios where you could only customize the appearance, abilities and choose the weapons.
On a version of Cybertron where Energon shortages have left many of the surviving Autobots and Decepticons all-but immobile, Hot Rod opted to be converted into a smaller and more efficient Micromaster, and thus retained his mobility. Detesting the corrupt system that has fallen into place, Hot Rod seeks to reform Cybertronian society from within the established government, while his former comrade Grimlock joined the resistance in an effort to bring down the old order. Feeling this approach to be no better than Megatron's rebellion that triggered the Great War, Hot Rod opposed Grimlock's efforts, particularly when his plans came to include using the G-Virus to turn a large number of "Builders" into immobile clones of Galvatron, unaware that the effects would also spread to a number of Maximals, Predacons, and Micromasters. Fortunately, Grimlock was betrayed by one of his own men, who destroyed most of the virus, though not before one Cybertronian was infected.
With Season One of Cyberverse drawn to a close, we have word of a newly-listed Cyberverse DVD currently available for pre-order. Titled ‘Transformers Cyberverse: The Journey’, the anthology consists of 66 minutes of product, which can only be assumed to consist of the first six episodes, given the DVD’s plot synopsis and the title of the collection corresponding to the show’s fourth episode, ‘The Journey’. The DVD itself is listed here by New Zealand based online retailer - Read More

A re-release of the Leader Class figure from the Revenge of the Fallen line, but with retractable forearm hooks (as seen in his battle with Grindor) in place of the blades.[113] In addition, the figure comes with the unmasked head of Buster Optimus Prime and is painted with battle damage effects. A recording of Peter Cullen saying, "We must stop the Decepticons!" is played when his chest is pushed upward via a lever on his waist.[114] Fans have nicknamed this figure "Battle Hooks Optimus Prime" to distinguish it from the other Prime figures.[115]


"Vibrant Red" Alternity Convoy is a redeco of the "Ultimate Silver" figure in the much more traditional red and blue Prime color scheme, representing the Optimus Prime of universal stream Primax 109.0 Beta. The figure was available simultaneously with the Ultimate Silver version, sharing the same packaging and pack-in materials, save for the color of the illustration on the front of the box, and a sticker that identified the figure within.

Something of a shellformer, Convoy Nike Free is colored primarily white and red in his alt mode of a realistic-looking, scaled-down Nike sneaker, complete with (gratuitously long) real fabric shoelaces. In robot mode he incorporates some additional blue and silver in predictable areas and has a somewhat uniquely-shaped yet instantly recognizable G1-inspired head.
A redeco of the Super Optimus Prime mold with a primarily red cab, much deeper blue, and a Prime Force uniformly colored in black was planned to be released with Smallest Transforming Transformers Generation 1 Optimus Prime as a Target exclusive. The toy got far enough along in development to have package artwork created by Dan Khanna, which was later revealed online, but it was canceled shortly before making it to full production. Its red, white, and black coloration earned it the festive nickname of "Santa Prime" among fans online.
Apart from this, Optimus Prime is also the weakest link of the gestalt combination, due to a number of design failures attributed to his torso mode. The square holes-and-tabs used to secure the arms together when in torso mode are too weak to remain locked in place (though a very small amount of copies can secure the arm well), and are prone to falling out of position should an attached arm be moved. The torso mode's skirt plate is also attached to the stomach rather than the pelvis, rendering the waist swivel nearly worthless due to the skirt obstructing articulation.
He next appears in Transformers: Energon, the only time during the Unicorn Trilogy where Prime is not the main protagonist. In Energon, set ten years after Armada, he is no longer able to combine with his trailer. Instead, he has been gifted with the Spark of Combination by Primus, allowing him to combine with the quartet of vehicular drones in his trailer. Fire One, Copter Two, Digger Three, and Submarine Four, can each form either an arm or a leg when they combine with Prime, creating his super mode. Later, Prime gained the ability to combine with fellow Autobots Wing Saber and Omega Supreme, the latter case creating Optimus Supreme.
A standard brick with two rows of four studs delivers a profit to LEGO that is orders of magnitude greater than any specialized element, all because the brick is what LEGO calls a “universal” or “evergreen” element that can be used in so many different sets. A one-of-a-kind, specialized piece, however, generally works in just one or a few sets. Moreover, the cost of molding a standard brick is orders of magnitude cheaper than producing a specialized piece.
After their own Optimus Prime disappeared, Scavenger and Smokescreen discovered an alternate version of Optimus Prime lying unconscious and barely alive in Autobase Earth. Though Red Alert did what he could, the mysterious Prime reactivated only long enough to utter a cryptic statement about the walls crumbling and the coming of chaos, then died. Worlds Collide, Part 1 of 4
Prime was perpetually at the forefront of the action throughout the early years of the war on Earth, usually confronting Megatron, though in some rare instances, such as against the Insecticon-controlled Decepticons or the Combaticons, teaming up with him for the greater good. He has suffered his fair share of battlefield scrapes, almost meeting his end when his vital cosmotron component was critically damaged by the Decepticon jets and when Laserbeak had his body disassembled and turned into Decepticon trophies, such as a pet "alligaticon" and a defense laser.
Minor note: Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
"Special Edition" Optimus Prime is a redeco of the Classics multi-pack toy, featuring some minor paint detail changes, bluer translucent plastic, darker and cooler gray plastic, and darker metallic flake red and blue plastic, with his (previously black-only) rifle body most notably now being cast in both blue and black plastic. He came in special "book box" style packaging with black-and-white boxart, and was only available at retail in Australian and Asian markets. North American customers could later buy him via Hasbro Toy Shop.
This figure was released during the short-lived period when Hasbro was treating the Beast Wars as an extension of the Autobot/Decepticon war, and Optimus Primal was presented as being the same character as Optimus Prime. This was soon relegated to the realms of micro-continuity when the Beast Wars animated series began and clearly established that the two Optimuses were different characters, but the toy remains one that was officially branded as Prime, and is consequently listed here.
×