Prime filled one of the chase figure slots for the tenth wave as well. This rare figure was the same as the regular Super Mode PVC, except instead of wielding his Convoy Gun, Prime was armed with the Star Saber sword. As with the previous chase figure, it could only be found in one out of every ten cases, and took the place of the full-colour Prime figure in that assortment.
Part of the first wave of Prime: Beast Hunters Series 3 Cyberverse Commander Class toys, Optimus Prime is an all-new mold. He now transforms into a monstrous, flat-nosed truck with spiky fenders at the front and a cage compartment at the back, and comes with the Thunder Lance and Star Saber. Each of the weapons features two differently-placed 3mm posts, allowing them to be held by his hands, or mount onto two ports on the rear vehicle sides, as well as allowing the lance to additionally be used as a pressure-fired missile launcher.
Another release of the Reveal the Shield Legends Class sculpt. The deco for its initial release is unchanged from the Transformers release from 2012, whereas the tooling is identical to the 2012 release's running change variant, with the retooled hands and a hole on the back of his head/top compatible with Cyberverse 3mm pegs. Bizarrely, the package art is lifted directly from the Generations Legends Class Optimus Prime/Autobot Roller two-pack's packaging, whereas the stock photos depicted on the back of the packaging are taken from Reveal the Shield Optimus Prime's packaging and only slightly altered, advertising a "Reveal the Shield" rubsign gimmick the toy doesn't actually have. Meanwhile, Hasbro's official stock photos provided to online retailers (including an in-packaging photo) depict the toy with the sword that came with the running change variant of the sculpt's 2012 release, even though the actual toy doesn't include the sword.
The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco from Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode, he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.
Optimus Prime led the Autobots to stop Megatron's attempt to cyberform Earth. After discovering that Megatron's new weapon was the Proudstar, Optimus initially tried to preserve the Cybertronian history contained on its Ferrotaxis supercomputer. Inside the Proudstar, he received a prophecy of his future death from Teletraan Alpha, but he merely expressed happiness that his friends would survive. After the Plasma Core was damaged and proved to be too great a threat to Earth, Optimus reluctantly decided to destroy it and the Ferrotaxis in order to preserve humanity's right to forge their own future. When Megatron shot shot the Ferrotaxis into space in one last spiteful effort to stop the Autobots, Prime rode an Insecticon swarm into Earth's orbit for a final showdown with Megatron, ultimately forced to destroy the Ferrotaxis. Once Megatron was again defeated, Optimus called upon the Autobots to stop merely living upon Earth and adopt the planet as their new home. Later, he and Wheeljack discussed plans for the Optimus Maximus project. Transformers: Devastation
The first Cybertron Optimus Prime toy transforms into a heavily-armed fire truck of made up origin, topped with two large cannons. The left fires a spring-loaded translucent blue missile, while the right features electronic sound effects and a flashing red LED. The cannons and the sides of the truck fold down to create an unlikely flight mode for the vehicle.
A slight redeco of Takara's Deluxe-size Optimus Prime was released as part of a special set commemorating both the 20th anniversary of Transformers and the 30th anniversary of its progenitor, Microman. Coming with an exclusive metallic redeco of Takara's Kicker, which was based on the Microman body, this Prime featured a chromed grill where the original had painted plastic, and supposedly slightly shinier plastics. Very slightly.
Released in the first wave of the Authentics toyline, "Autobot Optimus Prime" is a new mold the size of a 2015 Robots in Disguise Battle Pack toy. He changes from an evergreen-inspired robot into a more G1-based truck in just four steps. His instructions are incorrect; for truck mode, his legs must be folded in before the arms, otherwise the locking tabs on the arms will get in the way. Due to his transformation, he ends up with no elbows and a fake chest. He also has problems standing up due to hollow legs.
This Optimus Prime is a new Voyager-sized Triple Changer mold, which transforms from robot to tanker truck to plane and back. His robot mode is heavily based on Generation 2 Laser Optimus Prime, whilst the deco appears to draw from Star Convoy. His Titan Master partner Diac transforms into his head (but any Titan Master figure is compatible). Like all Titans Return Voyager class figures, he has built in mechanisms to "bulk up" his noggin. In his case these are spring-loaded pylons. His robot mode also features fake truck windows.
In order to comply with the FTC's endorsement guidelines, we hereby inform this site's viewers that we occasionally receive sample products, content, or other forms of media from various companies in order for us to provide content of interest to our readers. Some of the content on this site are sponsored posts for which we have been compensated. Some of the links to external sites posted on this site may automatically be converted to an affiliate link for which we may be compensated. We are a participant in several affiliate programs with retailers such as Amazon, Walmart, Target, eBay, and other affiliate programs. These affiliate advertising programs are designed to provide a means for us to earn fees by linking to those affiliated sites.
It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
Back in the 60s, Hasbro was commissioned to play down the negative stigma surrounding US soldiers fighting in the Vietnam War. The result was four, 12-inch tall dress-up dolls featuring realistic camouflage fatigues and weapons of the time. The figurines represented the Army, Navy, Air Force and Marines. There was no real storyline at the time which limited the allure of the toys.
The BK tie in toy of Optimus Prime is essentially two toys in one. The first part of the toy consists of two truck halves, which snap together around a sculpted robot mode Optimus Prime. The truck is squat, and primarily blue, with outbursts of chalk gray paint and red flames. Pulling back and letting go activates the gimmick: Prime "drives" forward and bursts from the truck mode, "transformed" to robot mode. This gimmick has marginal success.
Another thing different now from when I was a kid (70s/80s) is that the sets contain much fewer basic bricks. It seems the models are made out of all these exotic specialized pieces which are less useful for general building. Is this a business strategy to sell more sets by reducing the reusability, a marketing ploy to sell more pieces by making every set include unique collectable parts, or just trying to make the models look more realistic/slick? I think Lego was more fun when the majority of bricks were basic.
Once again Optimus Prime and Megatron were re-engineered, with Prime now a fire truck and Megatron a six changer, whose modes included a dragon, bat, jet, land-craft and a giant hand. Another G1 character to get a new toy for this line was Ultra Magnus, who could combine with Optimus Prime to form Omega Prime. Other combiners were created for the series too, such as Landfill and Rail Racer. Bruticus, a combiner from G1 was also recoloured and introduced into the series, with a coinciding toy re-release. The Combaticons that formed Bruticus were the first of the Decepticons to be introduced into the show along with Scourge, who as a toy was a black repaint of G2 Laser Prime. These were not the only toys to be re-released for this series, with many from past lines being repainted and packaged in RID boxes. Robots In Disguise was responsible for introducing a lot of concepts that would be re-used often in the next incarnations of Transformers.
In reorganizing the company, LEGO became more efficient. The data shows that they have been able to standardize costs and it is likely that they were able to hedge the price of plastic against future price fluctuations. In protecting their business, they have also been able to normalize prices for their customers. A stable price is good for everyone; it helps LEGO ensure that future production costs are budgeted for and it helps the consumer manage their budget. This allows LEGO to protect and grow its market share.
On a mission with the Triggerbots to stop Megatron from claiming the Underbase, Prime was forced to jettison the massive databank into space to prevent anyone from acquiring its power. With this action, he proved his wisdom and skill to the Autobot Council of Elders. He continued to move up in rank, eventually becoming the field command over the Autobot armies.
There may be two things you didn’t know in this one: 1) Bumblebee is in the Transformers Hall of Fame; and 2) There’s a Transformers Hall of Fame. The shrine to all things Transformers was the brainchild of Hasbro, the American toy company that worked with Japanese toy company Tomy to create the Transformers in 1984. Starting in 2010, they wanted to honor not just popular characters, but also the real people behind the toys, TV shows, comics, and films.
The series begins when Optimus and his crew, after picking up a disillusioned ninja named Prowl, are sent to clear rubble from a space bridge passage. There, the Autobots stumbled upon the Allspark and are immediately attacked by Megatron's battle cruiser, the Nemesis. Through treachery by Megatron's second-in-command, Starscream, Megatron was fragged and the Autobots crashed on Earth in the early 21st century. After being in stasis under Lake Erie for 50 years, the Autobots awaken in Detroit of the near future, where they immediately discovered humans in need and became heroes of the city. During the battle for the possession of the Allspark, Optimus goes offline after defeating Starscream, only to be revived by Sari Sumdac and her Allspark-infused key.
Rodimus and Cyclonus appear together in the story Wreckers: Finale Part II from 2007. During the invasion of Cybertron, Cyclonus and Rodimus come to final blows, fighting each other to a stand-still. Both severely wounded, Cyclonus is about to kill Rodimus when the Predacon Rotorbolt arrives and kills Cyclonus for betraying him. Rodimus then helps Cheetor to drain the power of the Divine Light from Cryotek. When Rodimus is dying from wounds he received battling Cyclonus, Tigatron is unable to save the former Autobot leader, having given up the power of the Vok to save the Predacon Fractyl.
During the promotion of the Transformers films, Optimus Prime appeared in several commercials. Optimus Prime, along with other Transformers, were featured in several commercials for General Motors. Scenes with Optimus Prime were used in several General Motors commercials. A commercial for the Discovery Channel featured Optimus Prime singing part of a promotional song.
The Premium Series Optimus Prime is both a retool and a redeco of the Leader Class Optimus Prime toy. The major selling point is a more movie-accurate head sculpt with longer ears and detailing based on the final CG head design, and a flip-out energy sword to replace the ion blaster that was included with previous versions of the toy. This energy sword is detachable and attaches where the Ion Blaster did, compatible with non-premium Optimus Prime Leader-class-based releases. Because his ears are much longer, the truck roof panel that hides his head now has two holes cut into so the head can fit inside the cabin.
Micromasters teams have teamwork ratings instead of ranks. Unlike the other ratings, teamwork seems to be split along faction lines, with Autobots typically holding higher teamwork ratings than Decepticons. A second unique spec value, Cooperation, replaced the Firepower rating used on individuals' cards. The traditional order (as above) was also abandoned for the Micromaster team specifications.
The first Generation 2 Optimus Prime toy was largely identical in sculpt to the original release. However, his trailer was cast in black plastic, with the original blue and silver striped sticker replaced with a red and silver one that had "Optimus" in large block letters on it. The trailer also featured a soundbox attachment with a sculpted Autobot symbol on the front. The soundbox could activate a truck engine noise, a laser gun sound effect and a (badly) garbled voice that said "I am Optimus Prime!". This soundbox could also be attached onto Optimus Prime's back and be used as a sort of backpack.
The instruction manual for the MP-04S Convoy Sleep Version reveals a hidden message saying that Rodimus will be the next installment in the Masterpiece series. Concept sketches of the figure were released online in July 2010. The figure is a faithful modern recreation of the original G1 toy. Gimmicks include retractable binoculars, spinning saw blade and the Matrix of Leadership, but the figure's main feature is the ability to transform into both Hot Rod and Rodimus Prime. The transition between the two incarnations involves rotating the face, extending the legs and adjusting the spoiler on the back.
Optimus and Bumblebee snuck into the Decepticons' base, and found their enemies upgrading themselves with Autobot parts. The pair took offense to this, and Bumblebee set about sabotaging the process. Megatron wound up tripping on some gumballs thanks to the Autobot's mucking about, and Optimus congratulated his fellow Autobot on a prank well done! Intro!
The main difference is an extensive redeco, rendering Prime in his traditional colours instead of the iPod-inspired white. (Yes, it actually had more to do with iPods than Magnus, believe it or not.) Reminiscent of the Kiss Players, iPod Optimus Prime's entire ABS/PVC structure is painted over, including his fists and the silver stripe that runs along his chest. His wind shield is colored blue like the one in the 2002 New Years Convoy reissue. The silver-grey trailer has a fairly elaborate deco, featuring detailing that resembles the outward appearance of the traditional Prime trailer, including the doglegging blue stripe and Autobot symbol, an effect somewhat marred by the large, visible gap on one side. When reconfigured into dock mode, the interior surfaces surrounding the speakers are decorated with black-on-silver techno-patterns as well as three, count 'em, three logos proclaiming the name "Optimus Prime". The recessed space also features a stylised, almost Frank Milleresque, high-contrast portrait of Prime's face, although this would be largely covered by the intended insertion of an iPod.
When they could not reanimate him, they used his body as a lure instead, bringing the Autobots to their lab, where they are infected. As this "Hate Plague" began to spread across the galaxy, Sky Lynx retrieved a Quintesson, who fully restored Optimus Prime to life. Coating himself in Morgan's heat-resistant alloy, Prime reclaimed the Matrix from Rodimus and unleashed its concentrated wisdom to destroy the Hate Plague.
Great read. I have noticed an absolute drop in quality myself. My sets in my youth range from 83 to 90. My sons are from 2011 and there is a clear distinction. Aside from the weight of identical bricks being different, the older bricks stay together in a much more durable way than the new bricks. To test this, I created the same models using all old bricks and all new bricks and the difference was marked. I understand doing certain things to reduce costs, but not at the expense of quality…
When IDW Publishing received the rights to the series, author Simon Furman was hired to oversee the line. Furman decided that the Generation 1 continuity "was in need of ... a contemporary restart" so that the comic could retain a modern audience. Furman's revised continuity establishes Optimus Prime as the present-day leader of an Autobot army spread across the galaxy in small units, waging a covert war against teams of Decepticon infiltrators over resource-rich worlds. The Stormbringer miniseries explains that the Transformer homeworld of Cybertron is a dead planet, ravaged by an ancient cataclysm caused by the Autobot-Decepticon War. Prime had been forced to ally with his arch-rival Megatron to end the destruction. In the series, the interference of Jetfire and the Technobots, in a plot organized by the Decepticon Bludgeon, alerts Prime to the possibility that the Cybertronian cataclysm might be re-ignited and spread to other planets. Prime calls in the Wreckers, meeting them on the surface of Cybertron in time to witness the return of the being called Thunderwing, the focal point of the apocalypse. The combined efforts of Prime, the Wreckers, Jetfire, the Predacon-led Decepticons, and a unit of aging Centurion drones are barely enough to render Thunderwing inert.
Megatron is captured by the Autobot Targetmasters in the episode "Do Over". When Optimus learns Megatron has been captured, he rushes to be the one who kills his old enemy, despite the closing launch window of the Ark. When confronted by Optimus Prime, Megatron attempts to use the Autobot Targetmaster Nightstick to shoot the Autobot leader, but Nightstick takes control of Megatron's arm. Megatron then tricks Optimus into using Megatron's own sword to cut his hand off, freeing him from Nightstick. Optimus fails to kill his foe and misses the launching of the Ark, which has been taken over by Rodimus. He then takes out his anger on Blurr.
Honestly, all the charts were done in Excel. I tried other methods but that was the easiest since all my data was in excel already. They are X,Y Scatter plots with sooth lines – heavily tweaked. Made the lines thicker which makes it look smoother and changed the layout a bit to make it clearer. The Excel defaults are ugly but if you spend enough time tweaking them you can get something passable.
In one possible scenario, Optimus was surprised to see Beachcomber return to Autobot headquarters soon after his departure. Beachcomber informed Optimus that he had uncovered the Decepticon's newest hidden fortress, and he suspected that the Decepticons were up to something big. Optimus sent out Beachcomber once more, this time along with Powerglide and Windcharger to investigate the Decepticons' plot further.
This gold vacuum metallized (save for his black joints, which they were made out of unpaintable plastic) Protoform Optimus Prime figure was featured as a Lucky Draw giveaway (along side similarly gold vac-metal versions of Voyager class Optimus Prime and Protoform Starscream) in the December 2007 issue of TV Magazine. Released in 2008, only 5 pieces were made, making it one of the rarest Lucky Draw figures; the images at right represent the only known photographs of it.