Chronicle "Movie Optimus Prime" is an e-Hobby exclusive redeco of the Deluxe-Class Dark of the Moon Optimus Prime figure, and comes in a two-pack with a reissue of the Generation 1 Optimus Prime figure. Instead of the blaster/axe MechTech weapon the original release of the figure came with, Prime is armed with a redeco of Dark of the Moon Jolt's Blaster/Hand Cannon weapon.
The project was crowd-funded through Japanese crowd-funding site Makuake. For 5,400 yen, contributors received an INFOBAR Optimus Prime, or for 16,200 yen, received INFOBAR Optimus Prime, INFOBAR Megatron and INFOBAR Bumblebee, the only way to obtain the last two items. The project received one million yen in the first 24 hours, ultimately topping out at over 32 million yen.
Legion Class Optimus Prime has been found at Family Dollar and Dollar General stores in the United States. A later variant repleaced the red Autobot insignia with a black version. This later version was also released at general retail in Australia, New Zealand, Europe, and Russia. In Singapore it was released together with Bumblebee and Starscream as part of the promotion for Age of Extinction in selected cinemas.
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.
The mold suffers from a minor design oversight, wherein the rear Nissan badge collides with his left leg strut when the left foot is hinged over and pegged into a clear plastic socket during transformation, with the results being that the connection is slightly crooked, isn't very secure, and sometimes pops off, and that the crooked pegging often causes the socket to crack.
The single carded release of Optimus Prime is a redeco of Revenge of the Fallen Legends Class Optimus Prime, exclusive to Walmart in the US and Asda in the UK. Deco changes included in this toy are the top half of the knee armor's blue being omitted and an Autobot insignia tampographed on the left knee, and similar to the Legends Class Power Armor Optimus Prime: the red arms, and the abdomen was replaced into blue.
The two sides found themselves equally matched until the Constructicons merged into The Devastator. The tables were turned once more when the Dinobots appeared, and mercilessly slaughtered the Constructicons. The Decepticons' plan foiled, Optimus decided that the Autobot-Decepticon war had come to an end, despite Megatron's protests to the contrary. He and his Autobots then drove away victorious. Battle for Earth
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth, picking up one year after the events that saw Optimus Prime's return to life.
When the narrative begins, we’re taken to Cybertron, where a narrator tells us of the battle between the Autobots and Decepticons, a war fueled by the Decepticons’ desire for total domination. We’re told, “The Autobots, on the verge of extinction, battled valiantly to survive.” Then, two Autobots in robot form climb out from under a grate, armed with a bunch of energy conductor sticks: Wheeljack and Bumblebee. Wheeljack transforms into a Cybertronian vehicle, then Bumblebee loads the sticks inside him. Bumblebee is so relatively small that he remains in robot form and hops inside Wheeljack for a ride, rather than transform himself.
So as a MOC builder, I have found that I tend to design MOCs on LDD and acquire parts as needed for each MOC from bricklink. I now tend to pass on licensed themes. I am especially turned off by the rehashing of many of the Star Wars vehicles. Sets that I buy tend to be Creator sets for my kids or the occasional “special edition” set that appeals to me such as the Sopwith Camel set.
A standard brick with two rows of four studs delivers a profit to LEGO that is orders of magnitude greater than any specialized element, all because the brick is what LEGO calls a “universal” or “evergreen” element that can be used in so many different sets. A one-of-a-kind, specialized piece, however, generally works in just one or a few sets. Moreover, the cost of molding a standard brick is orders of magnitude cheaper than producing a specialized piece.
Transformers: Cybertron, named Galaxy Force in Japan, was a follow-up to the successful Armada and Energon lines. The companion anime series program was not originally conceived or produced as a continuation of the Armada/Energon storyline, and it was only later that it was retconned to be a continuation. Thus, several inconsistencies exist. Once again, a new feature was introduced for the line—Cyber Keys, which activated special functions on the figures in a manner similar to the Mini-Cons in Armada. Each figure came with a Cyber Key regardless of size, but there were several Cyber Keys crucial to the plot of the anime series which only came with certain figures. Again, many of the same characters were included but with entirely new figures from new molds.
This version of Ultimate Class Beast Hunter Optimus Prime is exclusive to Cybertron Con 2013. While Prime itself is unchanged, he has been packaged in the box with his backpack plugged into his back, allowing the cannons to rotate when his spiky stomach-fenders are pushed down. The box itself also has slightly different text and graphical layouts, is encased in a large, slip-on outer covering, and features a designated number as part of the Thrilling 30 line.
Towering at only barely over two inches, this was actually not just the smallest movie-verse Optimus but even the smallest transformable figure of Optimus Prime for a while - ironically enough, being even slightly tinier than the Smallest Transforming Transformers Optimus Prime - that is, until he was later "out-tinied" by two other cute super deformed versions.
Nearly all the chrome is worn off, the tips of both smokestacks are broken, the fists and guns and voice box are long gone, there's a huge chip of plastic broken off one of the shoulders. I still have the trailer, but it's also broken in a few places. The door is gone. The spring-loaded gimmick doesn't work anymore. The repair drone broke off entirely near one of the joints on the main arm and was thrown away many years ago.
Created with the specific purpose of producing an Optimus Prime as accurate to the original animated series as possible, the toy is exceptionally poseable, partially constructed from die-cast metal, features rubber tires and vacuum-metalized plastic and is heavily detailed, with sliding pistons in its joints and working spring-loaded suspension in vehicle mode. The figure also contains multiple non-intrusive gimmicks, such as a moving mouthplate to emulate Prime's traditional method of speech, flip-up communications panels on the forearms depicting images of Bumblebee and Starscream, and an opening, light-up Matrix chamber in the chest, which contains a removable vacuum-metalized Matrix of Leadership that can also be pulled open.
Naturally, Optimus Prime got the biggest of the sets in the first year of Kre-O. The set can be built into a large long-nose tractor-trailer rig with a removable "sleeper" cab that hides a computer station, and a trailer that can carry the set's two motorcycles or open up to carry larger car builds. The robot mode build includes a huge Optimus, based largely on the live-action movie Optimus, though with a head based almost directly on the Classics Voyager Optimus. He is armed with a distressingly plain brick that fires pressure-launched missiles (aka his smokestacks). Most of the leftover parts in robot mode become a "headquarters" which is mostly just a random assemblage of mismatched-color panels and a pair of barricades. Both main builds leave numerous parts unused if you go expressly by the instructions, but hey, it's a building kit, surely you can find someplace to apply most of them.
Optimus Prime is then informed that Megatron has infected the core of Cybertron with dark energon and is given the task to undo the damage done. After rescuing Omega Supreme, Optimus, Ironhide, and Prowl fight their way to the core, but it's too late. The core informs Optimus that it is far too corrupted. It can repair itself by shutting down, but it will take millions of years. By that time, Cybertron will have to become cold, barren, and uninhabitable. The core gives Optimus a small piece of itself, saying it will still survive as long as the piece does. Optimus accepts the burden and the core relinquishes the Autobot Matrix of Leadership.
Something of a shellformer, Convoy Nike Free is colored primarily white and red in his alt mode of a realistic-looking, scaled-down Nike sneaker, complete with (gratuitously long) real fabric shoelaces. In robot mode he incorporates some additional blue and silver in predictable areas and has a somewhat uniquely-shaped yet instantly recognizable G1-inspired head.
In 2017, the Jazz action figure from the "Power of the Primes" line featured printed in Cybertronian alphabet "MAGA", an acronym for the phrase "Make America Great Again" most notably associated with Donald Trump and Alt-right. A spokesperson for Hasbro responded to io9 about the issue and stated that it was inserted onto the figure by one of their vendors and would address it with them.
While I don’t think anyone should complain about the price of Lego, I have to say that I don’t think our nostalgia for the 80s/90s is at all misplaced -it really was a better time to be a yuppy/young parent. There were more and better jobs available with better pay, benefits, and less required prerequisites. Young adults today have to work a lot harder to maintain the same lifestyle our parents had..of course there are exceptions, if you are especially gifted you can still make it in today’s world.
In "A Fistful of Energon", Optimus Prime is informed by Ultra Magnus about Starscream's escape from prison. He is quite upset when he has heard that Prowl set out in search for him on his own. He orders Prowl to return, but he disobeyed him. Later, Prowl is bound and abandoned by Lockdown, who wants to get the bounty that Megatron had set on Starscream. But Optimus Prime, together with Bulkhead and Ratchet, succeed in finding and releasing Prowl.
Optimus appeared in the 2008 BotCon voice actor play "Bee in the City", voiced by David Kaye. In this story, Professor Sumdac attempts to create a teleportation system to get the Autobots to Cybertron, but an interaction with Sari's key ends up transporting Optimus Prime, Bumblebee, and Sari to Transtech Cybertron. There, they met Flareup and are detained by Shockwave. Bumblebee teams up with Beast Wars Megatron to free his comrades, but must then stop Megatron from taking the key for himself. Afterward, the Autobots and Sari returned to their own dimension.
Optimus was one of the many soldiers fighting under the command of the Autobot leader, Jetfire. He was among the Autobots who launched in the Ark to clear a path through an asteroid belt. When the Decepticons attacked the ship, he fought a Seeker Decepticon while Jetfire sent the Ark crashing into Earth, knocking everyone aboard offline. Four million years later, they were repaired when the ship's systems were reactivated by a volcanic eruption. In the Transformers
Like some other Legends/Legion Class toys, several of the loose units were dumped in some Hobby Shop dealers in Asia, although this one is very likely to be an identical knockoff of the toy. While the paint applications are pretty much identical to the real deal, the pegs on the legs/trunk front can be a little too tight when attached. in some worst cases; it can break off if attempted to pull off by force.
All of the Tiny Titans were sold blindpacked. However: there's a tiny clear window in the back to peek at the item inside, making the task of getting the ones you want easier. Every collectible card included in Tiny Titans has a scannable insignia sticker on it. Scanning the badge unlocks a random amount of Energon "currency" and a randomized bonus power-up item, and can only be scanned once per day. It's honestly quicker and less redundant to say which toys don't have this feature.
The original Optimus Prime toy was a re-deco of the Diaclone Battle Convoy toy and transforms into a late 1970s red Freightliner FL86 Cab-over-Engine triple-axle semi trailer truck. The truck mode features rubber tires, and the cab is partially constructed of die cast metal. The windscreen section can open to reveal ultimately-unused seats that were originally designed for driver figures part of the Diaclone line. His trailer opens up into his Combat Deck, which features a missile-armed repair drone pod (with seating for one) mounted upon a boom lift arm. Situated in the base of this boom is a spring-loaded launcher that can be used to launch Roller out of the Combat Deck. Roller himself has seating for 4 passengers, and can be equipped to carry Optimus Prime's rifle or a fuel pump. The interior space of the trailer allows storage room for one Autobot car. In robot mode, he is armed with a black laser rifle, that, due to design, cannot be held straight. His fists are separate pieces which must be stored elsewhere in vehicle mode; there are pegs to store them in the trailer.
A K-Mart exclusive set released on "Black Friday" (the day after Thanksgiving, the most hellishly busy shopping day of the year), this set consists of Super Base Optimus Prime, Jetfire, their respective partner Mini-Cons Sparkplug and Comettor, the Adventure Mini-Con Team, and oddly enough, Longarm. Optimus Prime's red plastics and paint were replaced with gold, the only changes made to anyone in the set. It is this set from which the name of Optimus Prime's combined mode with Jetfire, Jet Prime, comes.
In late 2014, twelve Kreons were sold through TakaraTomy's "TakaraTomy A.R.T.S" Gacha capsule-toy machines in Japan. Thankfully for the rest of the world, these Kreons are all basically identical to previously-released ones in the Hasbro lines. The Gacha release of Optimus Prime is basically the base Custom Kreon Optimus using his clear-plastic helmet and carrying the small ray pistol, lacking his leg-wheels, smokestacks and backpack (and of course all those other parts and accessories).
Part of the first wave of Transformers: Robots in Disguise Hyperchange Heroes, Optimus Prime transforms from a futuristic trailer truck to robot in just 3 easy steps! His arms & legs serve as his trailer, while his chest serves as his truck front. He is also one of the few Robots in Disguise Optimus Prime toys which does not feature a faux window chest in robot mode. Both of his arms are articulated with 5mm holes in each hand.
Now I'm 30, so I don't know exactly what transformer toys you grew up with, but I had a bunch of the "Beast Wars" toys. Which with my nostalgia glasses on seemed much more detailed in my memory than what these new Transformers toys look like they are advertising on their website. However searching for a picture of my Optimus Primal toy... it isn't quite as detailed as I remembered. So my point is that it is probably a bit of nostalgia making you think yours were so much better than what they have now.
Available exclusively from Japanese clothing company A Bathing Ape in 2015, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique deep red color scheme matching the Convoy Reissue BAPE Ver. RED of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
This Turbo Change Series Optimus Prime toy is a slight redeco/retool of the Lost Age Series toy. Deco changes include omitting the flame tampos on his legs and shoulder, and added blue pinstripes on the Trailer/Wing Backpack to evoke his Generation 1 toy's trailer. This toy also features some new parts like the screen-accurate forearms, the command deck for the smaller Turbo Change Series toys, and the trailer's adapter. His usual Sword of Judgment is now replaced with a screen-accurate mold that is similar to the Armor Knight toy's sword, and he now features a new Vector Shield piece, which can convert into a battle axe.
The second Nightwatch Optimus Prime was released as part of the "AllSpark Power" second half of the Movie line. He is similar to the UK version of Nightwatch Prime, replacing most of his red and blue with different shades of blue and black, retaining his resemblance to Diaclone Powered Convoy in most respects. However, the subdued black and copper on the first Nightwatch Prime have been replaced with gold and a very bright blue, to signify the All Spark energy affecting the Transformers. The translucent parts were also cast in purple translucent plastic instead of black translucent plastic.
This gold vacuum metallized (save for his black joints, which they were made out of unpaintable plastic) Protoform Optimus Prime figure was featured as a Lucky Draw giveaway (along side similarly gold vac-metal versions of Voyager class Optimus Prime and Protoform Starscream) in the December 2007 issue of TV Magazine. Released in 2008, only 5 pieces were made, making it one of the rarest Lucky Draw figures; the images at right represent the only known photographs of it.