So as a MOC builder, I have found that I tend to design MOCs on LDD and acquire parts as needed for each MOC from bricklink. I now tend to pass on licensed themes. I am especially turned off by the rehashing of many of the Star Wars vehicles. Sets that I buy tend to be Creator sets for my kids or the occasional “special edition” set that appeals to me such as the Sopwith Camel set.

It should be noted that in the lead up to the premiere of the Japanese translation of this series, TakaraTomy marketing director Masahiko Yamazaki indicated changes would be made to place it as a prequel to the 2007 Transformers live-action film. This would have made this version of Optimus Prime an earlier version of the film character. In practice however, the only changes that were made consisted of trimming for time to allow additional promotional material to be added to the start and end, and the name change of Bulkhead into "Ironhide" (with Ironhide becoming "Armorhide"). The future 22nd century Detroit setting and characterizations of the cast remain as they were in the original production.
It may be that the price of an individual brick has gone down over time, but what does it matter if the size of the bricks has decreased overtime? Sure, the average number of pieces in a set has increased, but how many of those pieces are tiny details? To answer this question, I compiled all the weight data on brickset.com and compared the sets by their price per gram in a similar fashion to how I compared them by price of piece. Below is the chart of my results (prices are in US dollars).

An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.


Prime is loaded with a ridiculous number of features and accessories. The robot itself is highly poseable, and both the smokestacks on Prime's shoulders and the fuel tanks on his legs can be rotated forward to act as guns, even featuring sculpted detail to this effect. As ever, he comes with a trailer that opens up into his crazy-detailed Combat Deck, featuring more action features than ever before. In trailer mode alone, it features a flip-down support stand so it can stand alone, a spring-loaded pop-out ramp instead of a fold-down one, and when the trailer is split for transformation, the traditional support legs underneath automatically swing out into place. The trailer houses most of Prime's accessories, including his ion blaster (with a moveable ammo clip to allow for multiple poses) and energon-axe, as well as his classic gas pump accessory, now with a poseable wire instead of a rubber hose. Two fold-out compartments provide storage space for six of Prime's interchangeable fists, while the other two remain attached the robot: two clenched, two open, a pointing right fist, a tilted left fist (for holding the ion blaster's ammo clip), and two fists with slots to grip the miniscule Matrix of Leadership that fits in a tiny chamber in Prime's chest. The Combat Deck's artillery robot features two flip-out handles that Prime can grip as if aiming the drone's guns, and Roller is also included, with three different 3mm ports to hold Prime's gun and gas pump. Lastly, Prime comes with a rocket pack like those used by the Autobots in such Generation 1 cartoon episodes as "Dinobot Island", and a stand shaped like the Autobot insignia that allows him to be displayed in mid-air, as if in flight. The rocket pack also has 3mm ports for Prime's weapons, and stores on the front of the trailer in vehicle mode.
Several Autobots and Decepticons, including Optimus Prime, were reformatted into will-less war machines under the control of Cobra. During an initial attack on a human peace conference, Cobra's remote control of Optimus (whom they had nicknamed "HISS-14") mysteriously failed. G.I. Joe vs. the Transformers #1 Later at Cobra's island headquarters in the Caribbean, Cobra scientists pulled Optimus apart to find out what was impeding their commands. As this analysis took place, Optimus reverse hacked into Cobra computers until they shut him down in a panic. G.I. Joe vs. the Transformers #2 Despite this, Prime sent a viral message out to hundreds of email addresses that included the coordinates of Cobra's base. The message was intercepted by G.I. Joe who teamed up with Wheeljack and Bumblebee. After Wheeljack broke the remote control over the Transformers, Prime went after Cobra Commander. G.I. Joe vs. the Transformers #3 More than a bit frightened of a giant robot gunning for him, the human released Megatron, who was trapped in gun mode. Megatron transformed and fought Prime to a standstill until other Autobots came to back him up. G.I. Joe vs. the Transformers #4
Fellow Seibertronian Actar has written an in depth review on the new Transformers Studio Series Jetfire. He gave us great images of all modes including the combined mode and the giant cannon. We see how it scales with both SS ROTF Megatron and the ROTF Fallen. Enjoy! Alrighty! Just got my hands on the latest SS Voyagers and Leaders. However, the one that has won me over the most is Jetfire. So, I was rather hesitant and critical about Jetfire when I first saw him, but - Read More
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-Hobby in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
The figure has useful swivel joints at the shoulders and neck, and not-so-useful ones at the wrists and knees. It comes fully painted and pre-assembled, but true to his garage figure origins his Ion blaster must be cut free using a hobby knife, then assembled. His clear blue chest window piece is removable to allow the installation of his Matrix of Leadership, as is a Movie-style Matrix cover (not pictured). He also comes with an alternate hand that allow him to hold his accessories, as well as unpainted and uncut duplicates of his Matrix, hands and helmet, for some reason...
In yet another possible scenario, Beachcomber returned from his day off early to inform Optimus that Jessie had been taken prisoner by the Decepticons. Optimus deployed a team of Autobots to go to the girl’s rescue. Shortly before arriving at their destination, the Autobots had to choose their next course of action; they could either storm the Decepticon fortress by force, or try to sneak in through a secret passage Buster had previously discovered.

Ralston marketed many breakfast cereals based on cartoons in the 80s and 90s. One of these was Transformers. The Transformers Chocolate Flavored Cereal was a chocolate-flavored concoction, not unlike Cocoa Puffs, manufactured by the Ralston Corporation. However, the cereal was sold only in some parts of the United States and was short lived. The cereal box had Optimus Prime on its cover. The box claims the cereal had "more taste than meets the eye" and also had the ability to "transform ordinary milk into chocolate flavored milk". There also was a mail-away offer for a Jazz toy. The few boxes that still exist are collectables,[5] (one of which went for $349 on eBay).
Prime was brought back to the Autobot base for treatment, but the Decepticons exploited the Autobots' lack of manpower and struck again before Prime recovered. With his men taking a pummeling, the unconscious Prime had a vision of Akira, who spurred him on to awaken and rejoin the battle. With another power boost from Wataru, Prime unleashed a super-charged shot from his ion blaster that took down the fleeing Decepticons. Time of Resurrection

Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He is love, in bed.
This. Is. Awesome. I remember running LEGO piece auctions ~1998/99 on RTL (rec.toys.lego) then later my own website. I’d buy sets at Walmart and other places on discount, break them out, and sell the pieces as lots. I knew I’d always make good money if I could average < $0.10/piece cost (ideally around $0.07) and sell for $0.15 – $0.20+ … fun times!
Chronicle "Movie Optimus Prime" is an e-Hobby exclusive redeco of the Deluxe-Class Dark of the Moon Optimus Prime figure, and comes in a two-pack with a reissue of the Generation 1 Optimus Prime figure. Instead of the blaster/axe MechTech weapon the original release of the figure came with, Prime is armed with a redeco of Dark of the Moon Jolt's Blaster/Hand Cannon weapon.

Part of the first wave of Prime: Beast Hunters Voyager Class toys, Optimus Prime is a larger, all-new mold. He also transforms into a monstrous, flat-nosed truck, but differs from his Cyberverse toy by having a faceplate-less mouth, and by being equipped with a large four-winged backpack in robot mode. He features a 5mm port for each of his hands, one on his backpack, one near each of his front wheels, and one on each of his two upper wings.
Transformers: Energon introduced several new concepts to the toy line. Two new sub-groups, the Omnicons and Terrorcons, joined the fray, representing smaller factions of the Autobots and Decepticons respectively. The smaller toys in these sub-groups came with Energon weapons that could be used by the larger Autobots and Decepticons, along with Energon chips that could be fastened to the larger figures to enhance their power. Energon weapons and chips came in a variety of colors of translucent plastic. Many Autobot figures in the line were able to combine with a partner to form a larger robot through the "Powerlinx" process. The Decepticons were designed instead with alternative "attack modes". While no longer the focus of the line, there were several Mini-Con releases in Energon as well.
An undocumented transformation step includes flipping Optimus Prime's knees out in vehicle mode to form a back bumper with tail lights. Oddly, the toy itself and the package art show Optimus Prime with four fingers on each hand, while he has 5 fingers in the video game. The vehicle mode pictured here is minimally mis-transformed: The exhaust pipes have not been rotated to hide the indentations against the vehicle body. The instructions show the rifle being plugged in by its shorter peg, but the packaging depicts the rifle stored by its grip, which keeps the weapon higher off Prime's body, but is also more secure.
Mission Racer Optimus Prime features a pull-back gimmick by using a rubber band: insert the rubber band onto the front and rear post, then place Optimus Prime onto the ramp and pull his trailer backwards, and release the trailer for allowing the truck to zoom forward. The rubber band also has Optimus Prime's name and the Autobot insignia tampographed oh it.
The most controversial line of this period was the Pretenders. Pretenders consisted of a Transformer contained inside an action figure shell who could "pretend" to be either a human or a monster. Complaints with this line were numerous, including the lack of articulation of the figures (the shells could only move their arms), the simple transformation of the robots within, and their increasing lack of resemblance to any sort of modern recognizable vehicle. Still, despite the complaints, the Pretender line continued through all but the final year of Generation One, with variations such as Beast Pretenders, Monster Pretenders, Classic Pretenders, Mega Pretenders and Ultra Pretenders, each with variations on the theme or increasing levels of complexity.
Compared to the Combiner Wars release of the mold, Convoy features additional paint operations on the thighs, truck bumpers, the details on the inner legs, the gestalt chest halves (which are now painted over due to being molded in grey plastic), and the gestalt torso's lower section. The stomach's deco is also minimized, and the silver paint operations on the lower legs are now replaced with gunmetal while the mute metallic blue is now shiny metallic. When it comes to unpaintable plastic; his leg joints and feet are now blue, while the gestalt skirt flap is now the same grey as the arms. In addition, his flip-up gestalt leg panels and thighs are now molded in black, with the latter being painted in silver with some yellow details.

A (technically) unreleased "black" redeco of Henkei Voyager-sized Convoy using the same plastic layout and paint mask but replacing red and blue with black, silver with gray, leaving the previously vacuum-metalized grill/fender area unpainted, changing the blue tint for the windows to red and changing all silver and yellow paint operations to blue. The red Autobot insignias would have remained unchanged.[7]
This set is a ToysЯUs Japan exclusive, consisting of Powerlinx Optimus Prime (dubbed "Convoy Final Battle Coloration" and redecoed with more show-accurate colours, principally a silver mouthplate instead of red and varying color saturation from the Hasbro version), a "crystal" version of Overload ("Ultra Magnus Special Clear Version") made out of transluscent plastics, and an exclusive X-Dimension redeco of the Street Action Mini-Con Team. This set is entirely "new" content not available in the normal mass-retail Micron Legend line, and is also the last release of "X-Dimension" Mini-Cons. Rather than come with individual bio cards for the various characters, the set came with only a single card for Magna Convoy.

The 1992 and 1993 European and Canadian releases make up what is often called "Generation 1.5", much to the annoyance of many UK fans. These toys are similar in design to the Generation 2 Transformers, having lightpipe eyes, and pastel colors. The 1993 European figures used the G2 faction symbols which Hasbro UK designed because their licence on the G1 symbols had expired. The 1993 figures were repackaged for European G2 release in 1994, and three subgroup molds got used in the US G2 line.


In the third nexus, Optimus oversaw Ironhide testing Sparkplug's latest invention, the Sun-Pak, a miraculous device capable of fuelling a Transformer for an entire Earth day after being charged for only an hour in sunlight. As the trial-run wound down to an end, the Decepticons suddenly burst into the Autobots' secret underground testing facility, forcing Optimus to decide whether to order a tactical retreat, or have his Autobots fight the intruders despite his troops' low energy reserves. If he chose to stand and fight, he had the additional choice to either make the Autobots concentrate on Starscream, who is leading the charge against the Autobots, or divide his troops' attention onto all of the Decepticon assailants. If Optimus chose to attempt to eliminate Starscream once and for all, the Decepticon Seeker would beg for mercy, forcing Optimus into a choice yet again: accept the snivelling Decepticon's surrender, or continue his attempt to end Starscream's evil once and for all. Accepting Starscream's surrender spells victory for the Autobots, whereas ignoring Starscream pleas ultimately leads to Sparkplug being kidnapped by the Decepticons, necessitating Optimus to send Buster, Blaster and Bumblebee on a perilous retrieval mission while the other Autobots recharge at the Autobots' home base.


Jetwing Optimus Prime is a retool of Revenge of the Fallen Leader class Buster Optimus Prime, with an accompanying large jet pack and massive dual Gatling Cannons. The base Optimus Prime figure has several modifications including: a new stomach area and elbow flares to reflect the changes to Optimus Prime's CG model in Dark of the Moon, modified lower arms to incorporate MechTech ports and clips for the cannons, and a retooled area under his back so the jet pack can fit on more securely. The dual energon blades mounted on his arms have been removed. The toy retains Buster Optimus Prime's electronics, but batteries are not included.


In the final episode of Transformers: Cybertron, Optimus Prime proposed a new Space Bridge project using the power of the four Cyber Planet Keys and the four great Cybertronian ships. Many Autobots and former Decepticons joined in the project. Jetfire was left in charge of Cybertron as Optimus Prime led the Atlantis with the Earth Cyber Planet Key, joined by Red Alert, Safeguard, Scattorshot, Leobreaker, Menasor, and Heavy Load.
So as a MOC builder, I have found that I tend to design MOCs on LDD and acquire parts as needed for each MOC from bricklink. I now tend to pass on licensed themes. I am especially turned off by the rehashing of many of the Star Wars vehicles. Sets that I buy tend to be Creator sets for my kids or the occasional “special edition” set that appeals to me such as the Sopwith Camel set.
1· To calculate the average price per piece in a year, I took the price per piece of each set made that year, multiplied it by the number of pieces in the set and then averaged all the weighted prices. I used a weighted average because when we are looking at the price per piece we are essentially saying we could buy x number of pieces for y dollars. Larger sets tend to have a lower price per piece so in effect you could get more pieces at that lower price that year. Note: this was done using US retail price data from Brickset.

Meanwhile, the U.K. offices of Marvel Comics were producing their own storylines. Writer Simon Furman offered a different take on Prime, that he was weary of the war he had been forced to fight. In the "Prey" storyline, Prime arranged for Wheeljack to build a copy of himself and destroy it to see how the Autobots could cope without him. Unfortunately, the plan was derailed by Megatron and the Predacons. During the battle, Prime, Megatron, and Ultra Magnus were transported to Earth. There, Prime accidentally interrupted his own funeral service. The theme of war-weariness would again come to the fore in the U.K. strips detailing Prime's U.S. death.

But it is scary to think that there is a strong possibility they will look at redoing almost every Masterpiece now if this is a success. The MP+ releases have me feeling tired. I don’t have to get them but I have a completionist mentality. But a redo... I’m almost ready to check out of MP completely. I waited so long to get six seekers done pretty well to me. Now there’s a chance they will redo them. And soundwave. I sure hope I’m just being a worry wart.


Classics Optimus Prime was initially intended to be Deluxe-sized. An alleged list of the tentative Classics line-up[20] included a Deluxe-sized Optimus Prime without a trailer and a version with a trailer at the Voyager price point; however, it appears the decision was eventually made to upscale Optimus to Voyager size instead.[21] Don Figueroa's control drawings for the Deluxe version were leaked before the Classics line was even released at retail.[22] A gray model prototype was later shown as part of an interview with TakaraTomy's staff in Transformers Generations 2009 vol. 1.[23] It's unclear whether the trailer ever made it past the early planning stage before the size of the figure was changed.

1· To calculate the average price per piece in a year, I took the price per piece of each set made that year, multiplied it by the number of pieces in the set and then averaged all the weighted prices. I used a weighted average because when we are looking at the price per piece we are essentially saying we could buy x number of pieces for y dollars. Larger sets tend to have a lower price per piece so in effect you could get more pieces at that lower price that year. Note: this was done using US retail price data from Brickset.
Ultra Magnus is a redeco of the Diaclone "Powered Convoy" figure, itself a redeco and slight retool of "Battle Convoy", the toy that became the original Optimus Prime figure, sporting a new trailer. One of the last few Diaclone toys to be released in the Transformers toyline, Magnus was recolored from the original toy's dark blue, red and black color scheme into a more patriotic red, white and blue, though his chestplate, which was rendered white in his package art followed a more the blue color scheme of his shoulders. He transforms into a Freightliner COE, towing a car-carrier trailer capable of transporting up to four normal-sized Autobot cars. As with Optimus Prime, his cab transforms into a small robot, which can then combine with the trailer to form a "super robot", although all original Generation 1 fiction prior to the 21st century ignored this and simply rendered the super robot as Magnus's default robot form. To facilitate this combination, Magnus sports a slightly longer front axle than Prime, thereby creating tabs on either side of the cab that slide into grooves in the trailer to help lock the small robot into place. He is armed with a rifle sporting two handles that allow either of his robot modes to hold it, and two shoulder-mounted missile launchers, whose spring-loaded firing mechanism was removed for the Hasbro release of the figure.
×