Rodimus and Cyclonus appear together in the story Wreckers: Finale Part II from 2007. During the invasion of Cybertron, Cyclonus and Rodimus come to final blows, fighting each other to a stand-still. Both severely wounded, Cyclonus is about to kill Rodimus when the Predacon Rotorbolt arrives and kills Cyclonus for betraying him. Rodimus then helps Cheetor to drain the power of the Divine Light from Cryotek. When Rodimus is dying from wounds he received battling Cyclonus, Tigatron is unable to save the former Autobot leader, having given up the power of the Vok to save the Predacon Fractyl.
Produced as an action figure by the Japanese company Kaiyodo, the main selling point of the line is the 'Revolver' joint. This gives the figure a high degree of articulation, allowing for many dynamic and varied poses. Hot Rodimus is number 047 in the Yamaguchi series, and comes with extra sets of hands, a pair of pistols, an extra head (which is molded with his binocular vision, as seen in The Transformers: The Movie) and a display stand.
Part of the first wave of Mini-Con Battle Pack figures, this Optimus Prime figure is a new mold, about the size of a Scout Class figure (In Optimus' case, the size of Cyberverse Commander figure), and scaled with Legion Class figures. Its transformation scheme also takes some cues from the Legion Class figure. Battle Pack Optimus Prime also features a transparent orange battle axe & armor pieces, although the chest armor/flip-up mask piece is needed to be assembled first. The included pieces can be combined into a clawed battle axe, or attached to his body to form his armor (although the flip-up mask can restrict his head articulation). Optimus Prime can totally wield the axe dual-handed. As an undocumented feature, the axe can be stored on his truck mode with the tab featured on Prime's right shoulder.
Over twenty-plus years, there have been a bajillion releases of this mold, some identical to the original toy, and some featuring significant variants with notably different paint jobs, color schemes, accessories and other pack-ins. We have striven to list all these variants on this page under their respective series; for a quick-reference list of all variants and releases check here. The cab robot has also been used sparingly to represent different characters; outfitted with different trailers, it has become Generation 1 Ultra Magnus and Pepsi Convoy.
Classics Optimus Prime was initially intended to be Deluxe-sized. An alleged list of the tentative Classics line-up included a Deluxe-sized Optimus Prime without a trailer and a version with a trailer at the Voyager price point; however, it appears the decision was eventually made to upscale Optimus to Voyager size instead. Don Figueroa's control drawings for the Deluxe version were leaked before the Classics line was even released at retail. A gray model prototype was later shown as part of an interview with TakaraTomy's staff in Transformers Generations 2009 vol. 1. It's unclear whether the trailer ever made it past the early planning stage before the size of the figure was changed.
Of course, many voice actors have voiced him in different TV shows and video games over the years, in both English and Japanese. Most notably by a Power Rangers actor and a Batman voice actor. The latter is Will Friedle, who voiced Bee in the most recent series, Robots in Disguise, plus cameos in Rescue Bots, Transformers Prime, and the Predacons Rising TV movie. Friedle is well known as Batman’s voice in Batman Beyond. As for the Power Ranger, that would be Johnny Yong Bosch, who played Adam Park, the original Black Ranger. Bosch was Bumblebee’s voice in the video game Transformers: War for Cybertron.
After a thousand years of war on Cybertron, the planet was shaken from its orbit and risked being smashed to pieces by an asteroid field. Optimus decided to take a group of Autobots in the Ark and destroy the asteroids, but they were attacked by the Decepticons, and Optimus crashed the ship on Earth. Four million years later, the Ark repaired them, and they encountered Sparkplug and Spike Witwicky. Sparkplug suggested to Prime that the Autobots tap the volcano they'd crashed into for power. The two humans also warned the Autobots of an impending Decepticon attack, and Optimus laid a trap. Unfortunately the Decepticon forces attacked from all directions, and Starscream's null-ray put Optimus out of commission. Luckily Sparkplug easily fixed him, and his fast recovery inspired the Autobots to chase the Decepticons off. Optimus vowed to protect this new world. Battle for Cybertron
The Reveal the Shield Legends Prime mold was redecoed again for the inclusion in the second EZ Collection wave. This version of the figure replaces his blue on the head with black, and the blue paint on the legs is stripped off, revealing the black plastic underneath. and like the Megatron redeco in the same wave, features a Generation 2 Autobot symbol instead of a Generation 1 insignia.
Rodimus appeared in the text-based fiction Dungeons & Dinobots as one of the Autobots who attacked the Arch-Ayr fuel dump. Sent to capture rogue Dinobots for the Autobots, he was part of the group that captured Swoop. Together with Blurr, he then tracked Grimlock, but ran into competition with the Decepticon allies Sideswipe and Cliffjumper. After Grimlock bit off his left hand Ratchet replaced it with a circular saw (a reference to one of the original Rodimus' melee weapons in The Transformers: The Movie).
Unfortunately for both Takara and Hasbro, the Generation Two series of Transformers sold poorly, and Hasbro abandoned it after two years. There were toys planned that never saw release. Most of these were G1 combiner team recolors or recolors of recent figures. Four unreleased molds were released in the Machine Wars line, and four more resurfaced in the Robots In Disguise series.
He made it out of the building and ran into the real Sunstreaker, who blasted the 2 clones following Hot Rod. Sunstreaker ignored Hot Rod's warning about Scorponok's army and stormed into the building so Hot Rod painfully wired himself to send a distress signal. When Sunstreaker's real head was later disabled by Hunter, the Headmaster clones shut down, which Hot Rod explained to Grimlock. The group was surprised by the arrival of Shockwave, but Ultra Magnus had heard Hot Rod's distress call and was on his way to Earth. After Scorponok knocked out Sludge and Grimlock tended to him, the remaining Dynobots offered Hot Rod a lift aboard the Monsterbots' ship. He refused though, and made it back into Machination HQ to take care of something "personal". He eventually found Scorponok's real head. Hunter also showed up and let Hot Rod know how to disable it, but before he could do so, Scorponok grabbed him. Before Scorponok could crush Hot Rod's head, the Dynobots showed up and began to battle Scorponok. Hot Rod told Swoop which wires to sever, and he did just that, reducing Scorponok to a catatonic state. Ultra Magnus arrived took everyone back aboard his ship, which later docked with the Ark-32. Within 3 days, Hot Rod was fully repaired, with a new body form design.
This, of course, is all secondary to the main draw of the figure: it pulls an all-white trailer, which transforms into a working iPod speaker dock by rotating a substantial wedge of its full length 90 degrees . The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer. Although American importers shouldn't have too much trouble, those living in parts of the world using higher strength A/C current outlets should be warned NOT to simply plug the A/C adaptor in with only a socket adapter, as this will overload the device and fry it completely. Buying the appropriate kind of universal A/C adaptor with advice from an electronics specialty shop is recommended.
In "Endgame" 2-parter, Ratchet builds Optimus a jetpack attachment to help in the coming battle against the Decepticons. After some initial difficulty, Optimus is able to get the hang of the device, only to be shot down by Starscream's female clone, Slipstream. Though Ratchet urges Optimus to use the Magnus Hammer, he is reluctant to do so, given his past with Ultra Magnus. In the end, he wields the weapon as the Lugnut-controlled Omega Supreme clones land on Earth. During the fight, Optimus manages to master the Magus Hammer's power in order t overwhelms Megatron to the point of being acknowledged by name. After a devastating battle, the last remaining Omega clones self-destruct due to Starscream's intervention. With Prowl's sacrifice, the Allspark is rebuilt into one as it forms a barrier around the Omega clone, along with Optimus and Megatron. Prowl's spirit pulls Optimus from the bubble just as the clone self-destructs with Megatron still trapped inside. Prime laments Prowl's passing before defeating a heavily damaged Megatron and sparing him the deathblow, saying that Megatron does not deserve the "easy way out". He and his team return to Cybertron with Omega Supreme, the captured Decepticons, and Prowl's body and are greeted as the hero he had wished to be so long ago. The reconstructed Allspark, having a structure similar to the G1 incarnation of the Autobot Matrix of Leadership, is hung around his neck.
Instead of his trailer, Prime can alternately combine with Armada Jetfire, who forms a pair of legs, as "Jet Prime" (Jet Optimus on the cartoon, or "Jet Convoy" if you own the Japanese version). In addition to this, Armada Overload can form a pair of massive cannons that attach to either Prime's base mode, or mount over the shoulders of his super robot torso (with either his trailer or Jetfire as legs), forming Optimus Prime Megaweapon (or Magna Convoy).
As with other Dark of the Moon Activators toys, this Optimus Prime (released under the Robo Power subline) is a very simple one-step transformation toy. You simply slam him down on the big blue button on the back end of his truck mode and he transforms thanks to spring-loaded mechanisms. To transform him back, just slam him down again on the same blue button.
Apparently, early plans for the shield were to have it colored gold and silver, but it was later changed to gray and red. When a hand-painted prototype of the toy was first displayed at the 2013 New York Comic Con, the shield was colored yellow and silver; in addition, the original versions of the official Hasbro stock photos also depict the gold color, but the versions featured on the back of the toy's packaging were edited so they would accurately depict the final toy's colors for the shield. Meanwhile, the versions of the stock photos provided to websites and online retailers depict the shield in its final colors for the robot mode, whereas the vehicle mode photo is the unedited version featuring the shield's original colors. Furthermore, UK-based retailer Argos also featured unedited versions of the stock photos for both modes in one of its catalogs, causing some confusion among fans. Sometimes, the spring loaded "Automorph" feature in his head is too strong and causes the head to fly off...
Although MechTech Optimus Prime's deco is similar to the first Deluxe Class figure, some of his parts (robot shoulder flaps, chest piece/truck front) were recast in blue plastic (with the chest being painted red), and his paint applications on the pelvis, headlights & thighs are omitted. His front truck hood/backpack's deco is altered: the truck steps and the fenders were painted blue, and the gold sprays on the flame tampographs are removed, while he features additional flame tampos on both sides of his front hood, and an Autobot Insignia on his left robot shoulder. He still retains the light-piping gimmick, but cast in clear plastic, with the eyeballs being (halfheartedly) painted with clear blue. His MechTech weapon is cast in transparent orange plastic, with the exception of the scope/lever and the gun barrel, which remained opaque silver plastic due to being cast with unpaintable plastic. He also features Cyberglyphics on the left side of his vehicle mode front hood.
Back in the 60s, Hasbro was commissioned to play down the negative stigma surrounding US soldiers fighting in the Vietnam War. The result was four, 12-inch tall dress-up dolls featuring realistic camouflage fatigues and weapons of the time. The figurines represented the Army, Navy, Air Force and Marines. There was no real storyline at the time which limited the allure of the toys.
Part of the first wave of Age of Extinction: Generations Voyager Class toys, "Evasion Mode Optimus Prime" is an all-new figure based on the character's initial form in the film, transforming from a cab-over semi truck into a robot mostly similar to his previous movie design. The truck mode is heavily based on Generation 1 Optimus Prime's White Freightliner WFT alt mode in both sculpt and deco, although it draws a few details, such as the singular smokestack and wheel designs, from the heavily faded Marmon 97 seen on-screen. In robot mode, he sports faux-kibble windows and, amusingly, two false smokestacks. Unfortunately, due to being used with the transformation, he lacks the real elbow joint on the arm, which makes the lower section of the arm the only poseable section. Also, Optimus can wield weapons with longer posts while his arms are in a "default" 90° position.
Sometime after the Autobots and Decepticons awoke in the 1980s, the original Megatron gained access to one of Earth's Voyager spacecraft and inscribed a message on the disk on board. In the event that he lost the War, Megatron left instructions for the descendants of the Decepticons to use transwarp technology to travel to Prehistoric Earth, locate the Ark, and change history by killing Optimus Prime. The Agenda (Part 2)