For reasons unknown, his ion blaster was sculpted with a large, rectangular handle, requiring accommodating fists. In order to make use of the other weapons in the line (like his own rocket launcher and the solitarium weapons), he comes with an extra pair of replacement fists with smaller, circular peg-holes. This replacement-fist method is also used to plug in his clear-plastic energy axe.


Of particular note to Prime completists is that this otherwise traditional reissue of the Generation One Prime cab has a brand-new head sculpt which is essentially a miniaturisation of the Masterpiece/20th Anniversary Prime's noggin. Not only does this give the "classic" Prime toy a more show-accurate head, it's also the first iteration of this familiar mould in which the head is actually poseable. Being one of the better-articulated early Generation One toys, Prime can finally look in any direction he can aim.
Optimus Prime is also among the characters who appear in the flash game TRANSFORMERS CVBERVERSE Battle Builder Game.[21] Optimus Prime is one of the Autobots featured in Transformers: The Ride at Universal Studios theme parks. In the ride, Optimus fends off against the invading Decepticons at N.E.S.T. headquarters while telling Evac to escape with the AllSpark shard. He battles Megatron throughout the ride until Megatron is killed by Evac. Optimus then congratulates Evac and the riders for protecting the AllSpark.
This reissue of the original Generation 1 Optimus Prime figure comes in a two-pack with the Deluxe-Class Dark of the Moon Optimus Prime figure. Prime himself is almost identical to the Encore release, save for his trailer hitch which was retooled to allow a peg to be inserted within it while still being able to be inserted into the trailer itself (making it compatible with his G1 trailer and the new trailer included). Like the Encore release, he features lighter colors and tampographed shoulder symbols (which vary slightly from the Encore release).

In "Predacons Rising", Bumblebee, Jetfire, Jetstorm, Optimus, and Sentinel chase down the fugitive Wasp, but lose him to Swoop while bickering about what to do with him. They go after Wasp, only to find out that Blackarachnia has captured him and turned him into Waspinator. When Waspinator malfunctions and explodes due to the instability of the transwarp field that mutated him, Blackarachnia contains the blast with her webs, resulting in an explosion that consumes them both. Optimus is saddened by this, unaware that she and Waspinator are still alive on another planet inhabited by animals.
Hero Optimus Prime was the first new-mold Optimus Prime toy in the Generation 2 line. He transforms into a Kenworth truck of unknown model with a flatbed trailer. The truck and trailer form his robot mode, but cannot disconnect. His primary gimmick is an air-powered missile launcher that uses an air bellows attached by hose to launch his large, hollow, soft-rubber-tipped missiles. The bellows and missiles attach to his back in robot mode. His rifle plugs into the launcher's main body in truck mode.
Alternity Convoy transforms into a 1:32 scale Nissan GT-R, featuring die-cast metal parts, an opening hood, trunk and doors, as well as an interior, complete with his feet and thighs being sculpted to form the back seats. This complex figure stands at 6.5" tall, and is armed with a pair of blasters on each arm. In the hyper-dimensional world of the oft-confusing Alternity fiction, this figure specifically represents the Optimus Prime of universal stream Primax 903.0 Beta.
The First Edition Voyagers were never released in the US, forcing buyers to import him from Canada or Japan... at first. ToysЯUs later picked up this toy, along with most of the "First Edition" line, as part of a huge block of US market exclusives for holiday season 2012. This second run introduced a deco variant, in which the red paint on, beside, and below the truck side windows is omitted, revealing the patch of brown plastic underneath. As he is packaged in robot mode, with his front wheels and shoulders covering said patch, the only way to identify which version is which while in the box is by looking at the hinge joints beside his two painted torso lights, with the center portions of the hinges being unpainted brown on the variant. All releases of this mold also have a minor issue with the truck mode windvane/robot mode heels refusing to connect solidly to the truck cab in vehicle mode, leaving a visible gap above Prime's windshield.
Part of the fifth wave of Kabaya's revival of the Transformers Gum series, this snap-on transforming model kit of War for Cybertron Optimus Prime is sculpted from red, light blue, and gray plastics, and uses stickers for detail. He comes with a blue non-transforming version of his hand-held blaster rifle, which mounts at the rear in vehicle mode. He comes packed with a model kit of Tigerbreast, and a stick of gum.

Rodimus Prime is a fictional robot superhero character from the Transformers robot superhero franchise. He was formerly known as Hot Rod and was first seen in The Transformers: The Movie but was reformatted into Rodimus Prime when he received the Autobot Matrix of Leadership from his mentor, Optimus Prime, the leader of the Autobots, and assumed the role of the movie's protagonist. Hasbro has used the names Autobot Hot Rod, Rodimus, and Hot Shot as replacements for later characters, due to trademark issues with the name Hot Rod. His alternate mode varies between depictions, but usually possesses a red, yellow, and silver paint job.
Hot Rod was then summoned to Earth by Optimus Prime, as revealed in The Transformers: Escalation. With typical bravado Hot Rod and Hardhead insisted on heading to assist Prime's unit in stopping Megatron. Hot Rod left Hardhead to assist the other Autobots while he captured the Decepticon facsimile. Unfortunately, he almost collided with Prowl, who had had the same idea. Despite some bickering between the two, they were able to eventually capture the facsimile, forcing the Russian troops to back down. When Hot Rod heard the battle between the Ore-13 powered Megatron and the rest of Prime's troops, Prowl forbade him from interfering, entrusting him with the safe return of the facsimile. Calling Nightbeat for transport out, he was jumped and severely damaged by Skywarp and Thundercracker. Nightbeat teleported him away, but Hot Rod had been badly damaged, and the facsimile reportedly killed.
This Walmart-exclusive redeco and retool of the 2010 Transformers toyline "Battle Blades" Optimus Prime toy features the Japanese release's hooks (instead of swords), plus an all-new mouthplate-less, mouthed face. As part of the set's lunar theme, reflections of stars are painted across his vehicle mode sides and on his windshield, with a sharp reflection of Earth's Moon in one of his windows. This time, his Matrix of Leadership is cast in orange plastic.
The SS-03 version of Takara's Deluxe-class Optimus figure, based on the Anniversary release, was released in Hasbro markets in a two pack with the smaller Japanese Megatron figure. There are some tiny but notable differences between this and the Anniversary figure; the Hasbro version uses a more neutral dark-gray for the main body as opposed to the Takara version's blue-tinted dark-gray, plain dark-blue plastic rather than dark-blue-with-sparkles, and plain yellow paint for the cab's lights rather than sparkly-yellow/gold.
Released as part of TakaraTomy's Welcome to Transformers 2010 campaign, the "Sons of Cybertron" set includes a redeco of the 2006 Classics "Ultimate Battle" pack Deluxe class Optimus Prime, cast mostly in translucent plastic (his shoulders remain opaque Polyoxymethylene (POM)). He comes packaged with a similarly translucent redeco of Classics Rodimus.
Late in 2008, this version of Optimus prime was one of four Classics figures repainted into HasbroToyShop.com exclusives (the other three being the Megatron from this set in G1 colors, Grimlock repainted into Overkill, and Mirage repainted into Dragstrip). Unlike those three, it's debatable just how much repainting went into Optimus, but he comes in a snazzy new box.
The 5-inch Power series is a little more complex (4-9 steps) and a little more spoilery, because it’s the first hint we’ve gotten that Megatron might be a part of the Transformers: Bumblebee movie. Sporting a similar form to previous versions, his alt mode is a 4-track Cybertronian tank (with the usual very conspicuous face…funny how a lazy toy design decision from the first movie has now become cannon). The Power series also has the only Dropkick Energon Igniters toy. You can use the cores sold with the Power Plus and Nitro toys to unlock special features. Camaro ‘Bee and Hot Rod round out this series.
Meanwhile, the U.K. offices of Marvel Comics were producing their own storylines. Writer Simon Furman offered a different take on Prime, that he was weary of the war he had been forced to fight. In the "Prey" storyline, Prime arranged for Wheeljack to build a copy of himself and destroy it to see how the Autobots could cope without him. Unfortunately, the plan was derailed by Megatron and the Predacons. During the battle, Prime, Megatron, and Ultra Magnus were transported to Earth. There, Prime accidentally interrupted his own funeral service. The theme of war-weariness would again come to the fore in the U.K. strips detailing Prime's U.S. death.
Prime got his own rap segment. He was seen in his "Combat" toy body, waiting for Megatron as he attacked a human subdivision. Prime converted to robot form, blew up Megatron's weapon at point blank range, and slugged it out with him. Apparently emerging victorious, he was next shown sitting next to an identical truck, which kid mistook for the real thing. The real Prime then transformed and picked up the kid, inspecting the human with his cold, lifeless, flashing red optics. Combat Heroes commercial
For some reason: unlike the stock photos (pictured from the right), This Custom Kreon had a slight QC issue to the opaque and transparent helmets: One had two sides sculpted, while the other one has the small flat square sculpt (similar to the details on Hound's helmet) on the right side. Several samples had two different "variants": One with the perfect transparent helmet & a differently-sculpted opaque helmet, while the other one has the opposite. However: later releases fixes the problem by a running change.

Following our last article on in hand images of Studio Series 38 Voyager Class Optimus Prime (from the Bumblebee film), TonTon Reviews (who put up the in hand images), has come through on what they said and posted their review! This review allows us to get the best look at the toy yet, as well as its surprisingly complex transformation. We see the ion blaster included stores between his legs in truck mode to fill in the gap and hold it togethyer. The backpack in robot mode also has 5mm - Read More
In the movie, he starts out as a 1976 Camaro before modernizing himself. But the 2007 version (the fifth generation of the model) was a concept car-- you couldn’t even buy a new Camaro until 2009. They later switched to the production version for the 2009 sequel Revenge of the Fallen and he was yet another updated model for Dark of the Moon in 2011 (the SS model). In Age of Extinction, he appears both as a 1967 model and another new model of the current version. Finally, back in June, Bay tweeted that in next year’s The Last Knight, Bee would be a custom-built 2016 Camaro. Over the first two years of the relaunch, Chevy sold an astounding 140,000 Camaros and saw a 10% spike in the yellow model, thanks largely to our friend Bumblebee.

When Optimus transforms, his cab becomes an ion blaster and his trailer disconnects, forming a combat deck. The combat deck supports a mobile battle-station and command headquarters armed with assorted artillery and beam weapons that fire automatically. The combat deck can also serve as a radio antenna for battlefield communications between the autobots. The combat deck also included "Roller", a mobile scout buggy meant to scout behind enemy lines. When Roller is deployed, Optimus can see and hear what Roller sees and hears.[4] Injury to one component is felt by each of the others. If the combat deck or Roller were to be destroyed, Prime could survive. However, despite the slight degree of autonomy they possess, the combat deck and Roller would not be able to survive without Optimus.


Somewhere along the line, G.I. Joe picked up the familiar storyline that we all best associate with the toys: G.I. Joe Team vs. the Evil Cobra Organization. A classic tale of good vs. evil. Well guess what. Somewhere else along the line the franchise picked up a very different storyline and a new look to boot, highlighted by the newest figurine: The DARK NINJA MASTER.


Legends Class Optimus Prime is based on his original Generation 1 appearance. He features a fake grill for his robot mode, and his large legs result in a fairly thick and compact truck bed. He is part of "Reveal the Shield", a subline that outfits all its toys with rubsigns, and in this case, it's located on the left side of the truck/his left elbow.

Hasbro's Toys R Us-exclusive 2003 reissue of Powermaster Optimus Prime was actually a modified version of Takara's then-recently reissued God Ginrai set. As such, the cab was partly constructed out of die-cast metal, vacuum-metalized plastic and had clear blue windows. The trailer was retooled so the super robot's fists could slide in and out of the arms. This set also included the originally Japanese-exclusive Apex Bomber drone trailer that attached onto the back of Optimus Prime's trailer in vehicle mode, and could become extra armour in super robot mode.The missiles where unchromed and lengthened due to safety issues as opposed to the Japanese release which were chromed and shorter.

Reissued in 2003 as part of Takara's Transformers Collection line of reissues. This version (#13 in the Collection series) was retooled from the 2000/2002 Rodimus Major tooling in order to make the fists and engine block hole wide enough to equip Firebolt. In addition, the original 2 guns had their posts modified so that a Targetmaster Hot Rod could still use them, if the owner chose to.
In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.
Part of the first wave of Age of Extinction Custom Kreons, this Optimus comes with a buildable parts rack on which to hang/store his many many extra pieces. His "normal" helmet and blaster are chromed, plus he comes with an extra clear-plastic helmet, torso and legs. He also has a pair of extra arms (originally from the Kre-O Battleship aliens) plus a spare hand, as well as a buildable battle-axe, a buildable smokestack-pack, and an extra Wheeljack-style wing-pack.
In this universe, Optimus Prime transforms into a fire engine. The front section of the vehicle detaches and becomes Prime himself, armed with "Blaze Blaster" cannons. To attack, he is able to use his headlights, known as the "Fire Flash" attack, and leg wheels, known as the "Gyro-Strike". The rest of the vehicle transforms into a mobile battle station/refueling port/communications array and can combine with Prime as additional weapons and armor, forming his super mode referred to as "Super Fire Convoy". The ladder/hose section houses Prime's Power Stream water cannon, capable of shooting freezing streams of water, called his Blizzard Storm attack. It also contains a quartet of rocket launchers. In super mode, his feet contain missile launchers than can mount to the shoulders of his regular robot mode. In this mode, he can fire his fists for his "Flying Fist" attack.
Legion Class Optimus Prime has been found at Family Dollar and Dollar General stores in the United States. A later variant repleaced the red Autobot insignia with a black version. This later version was also released at general retail in Australia, New Zealand, Europe, and Russia. In Singapore it was released together with Bumblebee and Starscream as part of the promotion for Age of Extinction in selected cinemas.
 This is an arbitrary line but it is a line that needed to be drawn. There have been many promotional sets over the years which have very few pieces but carry a higher price because of their promotional status. These can range from keychains to individual minifigs to seasonal items. They are not representative of the typical price of a LEGO brick and therefore should not be included in the evaluation.
Hero Optimus Prime was the first new-mold Optimus Prime toy created for the Generation 2 line. He transforms into a Kenworth truck of unknown model which defies Optimus convention by being one continuous unit, rather than the traditional cab-and-trailer combo. Decals form the windows of a faux truck face to represent his chest, featuring both his name and what appears to be a life support readout coming alive towards the end. In addition to a small gun, he is armed with a large missile launcher, which can fire a rubber-tipped rocket by means of a bellows which you slam your fist down on to produce a puff of air. The launcher is accessible in both modes, ending up mounted on his right forearm in robot mode; the bellows is attached via a rubber hose and cannot be disconnected, but stores on the figures's back when not in use, as do the rockets. A similar air-launching system with identical missiles was used by the simultaneously-released Hero Megatron, and by Laser Optimus Prime the following year (see below).
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-Hobby in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.

In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.

×