This redeco of the Ginrai tooling of the Powermaster Optimus Prime figure (released concurrently with the 2001 reissue of the Ginrai figure) was a Toys R Us Japan exclusive black repaint, made to represent the original Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' color schemes.
A golden-chrome redeco of Cybertron Metroplex was offered as a contest prize in the December 2005 issue of TV Magazine, and came with an equally blinged-out Legends/EZ Collection Optimus Prime figure. Fifteen of this set were available as prizes in the initial contest; a single Metroplex was later offered as one of many prizes in a Takara website contest, but this version came only with the standard metallic paint version of Prime.
A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.
The set also includes a redeco of Generations War for Cybertron Optimus Prime figure, which changes the original figure's dark red plastic to a brighter, more vibrant red, changes the gray plastic to a darker charcoal tone, changes the "windows" from gray to nearly black, and replaces most of the original figure's pink-ish red paint details (which were yellow on the redeco from the "Rage over Cybertron" three-pack) to teal.
Optimus dueled Megatron atop of an overpass in a human city. Though he managed to knock Megatron's cannon loose early in the scuffle, Megatron managed to turn the tables on the Autobot leader, reattach his primary weapon, and blast his old foe. When Megatron moved in for the kill, Optimus got his second wind, and knocked Megatron clear off the overpass. They were always real to me.
This is a redeco of Ultimate Optimus Prime. While Prime himself only features a red grill, the trailer has been extensively redecoed, with an ornate golden Chinese dragon being painted on the trailer panels, and the various gray parts of the trailer panels, armor, and cannon being replaced by blue, red, gold, and burgundy. The toy was released as a "Year of the Dragon" Special Edition in 2012, since the Chinese Zodiac sign for that year is the Dragon.
A standard brick with two rows of four studs delivers a profit to LEGO that is orders of magnitude greater than any specialized element, all because the brick is what LEGO calls a “universal” or “evergreen” element that can be used in so many different sets. A one-of-a-kind, specialized piece, however, generally works in just one or a few sets. Moreover, the cost of molding a standard brick is orders of magnitude cheaper than producing a specialized piece.
This figure contains an unusual amount of sculpted detail on the inside of the plastic. The gorilla mode's chest has a ribcage, and the inside of the gorilla's face has a sculpted microphone, which lines up perfectly with the robot mode's head! Also, opening this toy's chest in robot mode reveals sculpted detail resembling the Key to Vector Sigma as it appeared in Beast Machines.
I have to disagree. Look at our planet. Jagged and rigid is an aspect of primitive technology. Smooth, compact, and protected is an aspect of futuristic technology. Transformers should look more advanced than what we hsve, nor technologically regressive. They have better scientists and millennia of knowledge compared to us. Smooth designs like Knight's are the only ones that make realistic sense in that context of technological progression, even as a life form.
The problem there is that Star Wars took over the Space theme and Harry Potter took over the Castle theme. Just keeping up with the kids- sign of the times. What’s a castle lover to do? Compare 6075 (Castle) with (7094 Kings Castle Siege) and 4757 (Hogwarts) and they all have their own fantastic attributes. Sell the Harry minifigs and buy some crownies- problem solved.
A K-Mart exclusive set released on "Black Friday" (the day after Thanksgiving, the most hellishly busy shopping day of the year), this set consists of Super Base Optimus Prime, Jetfire, their respective partner Mini-Cons Sparkplug and Comettor, the Adventure Mini-Con Team, and oddly enough, Longarm. Optimus Prime's red plastics and paint were replaced with gold, the only changes made to anyone in the set. It is this set from which the name of Optimus Prime's combined mode with Jetfire, Jet Prime, comes.
Hasbro's Toys R Us-exclusive 2003 reissue of Powermaster Optimus Prime was actually a modified version of Takara's then-recently reissued God Ginrai set. As such, the cab was partly constructed out of die-cast metal, vacuum-metalized plastic and had clear blue windows. The trailer was retooled so the super robot's fists could slide in and out of the arms. This set also included the originally Japanese-exclusive Apex Bomber drone trailer that attached onto the back of Optimus Prime's trailer in vehicle mode, and could become extra armour in super robot mode.The missiles where unchromed and lengthened due to safety issues as opposed to the Japanese release which were chromed and shorter.
Jazz and Ironhide reported to Optimus that the Decepticons were stealing gas, and Optimus was able to use Roller to find out the Decepticons were using a molecular transfer device. The Autobots assaulted the Decepticon stronghold so they could take care of the device. Summertime Coloring Book After a rain storm, Optimus and most of the other Autobots went out on patrol. When the Decepticons used a fake message to lure Bumblebee out of the Ark so they could take it over, Optimus used the same gambit to retake the ship. A Message From Outer Space
The figure was released in Japan along with Legends Megatron and Starscream, under the "EZ Collection" banner, in the same packaging as the Hasbro release but with a small card insert featuring the Japanese logo and nomenclature, similar to a USA Edition. As with all the EZ Collection figures, this release features a substantially greater number of paint operations that increase Optimus's resemblance to his larger figure.
Mega Optimus Prime is a new larger-sized mold with the similar transformation scheme from the 3-Step Changer toy. It transforms from truck to robot in just 3 easy steps! His deco is based on his appearance in the season finale "Battlegrounds". He also obtains additional articulation on the arms, and sports connector ports for any Robots in Disguise (2015) Mini-Con figures.
Available exclusively at Hasbro Toy Shop and their booth at San Diego Comic-Con 2011, this version of Ultimate Optimus Prime is presented in vehicle mode, packaged into a large, foil-embossed bubble packaging (similar to late Alternators packaging) styled after Optimus Prime's trailer, with an additional foil-embossed sleeve styled after the hood of Optimus Prime's truck. Exclusive to this release is a set of stickers one can apply to the trailer. The toy itself is otherwise identical to the regular retail release.
Forming a roughly 11-inch figure when fully assembled, Diablock Convoy is highly articulated, save for his head, which is only able to move up and down. Said head is also by far the most stylised aspect of the figure, with no real attempt to approximate Prime's face or mouthplate, instead featuring only a reversed block that gives the odd impression of a cycloptic eye. It is possibly intended to actually represent his forehead grill, as a yellow block inside his head construction remains barely-visible through a slit in his face, possibly intended to represent the classic toy's yellow eyes.
The voice actor drama was written for OFTCC 2004 by Simon Furman, set after the events in the comics. Among those taken from their world via teleportation beam by Unicron and his Decepticon minions were Spy Changers Optimus Prime, Prowl, Ultra Magnus, and Ironhide. The Autobot forces opposing Unicron attempted to deflect a beam, leaving them all trapped on an uninhabited ice-world. The Autobot forces teamed up to overcome the Decepticons led by Reptilion. The Autobots were then, presumably, returned to their own worlds.
The final waves of this line, released in early 2014, really pushed towards younger kids, with incredibly simplified designs based on the characters' Cyberverse releases, which actually allowed the toys to be larger than most others in their size class. Unfortunately, as they were tail-enders, their US releases were nearly nonexistant: only the Voyagers made it out at US retail, and only through discount chains like Ross and TJ Maxx. The rest ended up released only overseas (not even Canada got them!).
The "Breakout Battle" set includes another take on a screen-accurate "Scrapyard Optimus Prime", featuring a brown paint wash on tan plastic. The set was a shared exclusive between Toys "R" Us, online retailers such as Big Bad Toy Store, and Myer in Australia. The set was released in Australia, Singapore, and Canada but never actually made it to retail in the U.S. The set also includes Rollbar and a Vehicon.
Later, Optimus pursued Megatron to Earth to stop him from pillaging the planet's energy resources. Prime's loyal team of Autobots clashed with Megatron's Predacons on many occasions, stopping their schemes with the aid of Koji, a human whose father had been abducted by the Predacons. Prime and Koji went on to form a strong friendship, although Prime blamed himself for Koji's father's abduction. Optimus proved his bravery on many occasions, battling and defeating Sky-Byte in an underwater duel and personally rescuing Side Burn from a Predacon trap. Later, when Megatron targeted a tanker truck to scan as the alternate mode of the final protoform, Optimus Prime leapt into action in order to save the truck's human driver and, as a result, the tanker, Prime and the human were all scanned. With an infusion of Megatron's spark energy to complete the concoction, Scourge was born, emerging from his pod as a dark twin of Optimus Prime. Prime's pleas to make Scourge remember his original Autobot loyalties fell on deaf ears.
A giant-sized transforming Optimus Prime figure is set to be released for the third film. The set comes with a Leader Class-sized Optimus Prime figure and a trailer that transforms into his Omega Combat Armor - both of which combine to form Prime's Ultimate mode. This set will be released on August 1st, 2011, a month after the film's premiere.
If Cosmos radioed his findings to Optimus immediately, Optimus’s convoy moved in to investigate a nearby Decepticon base. En route, the Autobots passed near a human town, but began floating in mid-air before being able to reach it. Optimus quickly deduced that this phenomenon was caused by an anti-gravity beam, courtesy of the Decepticons. Worried about the nearby humans also being affected by the lapse in gravity, Optimus had to decide whether he would order his troops to stop and help the townspeople, or to continue forward and attack the Decepticon base.
Rodimus and Cyclonus appear together in the story Wreckers: Finale Part II from 2007. During the invasion of Cybertron, Cyclonus and Rodimus come to final blows, fighting each other to a stand-still. Both severely wounded, Cyclonus is about to kill Rodimus when the Predacon Rotorbolt arrives and kills Cyclonus for betraying him. Rodimus then helps Cheetor to drain the power of the Divine Light from Cryotek. When Rodimus is dying from wounds he received battling Cyclonus, Tigatron is unable to save the former Autobot leader, having given up the power of the Vok to save the Predacon Fractyl.
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt. However, due to the aforementioned lessened complexity, significant sacrifices had to be made, such as "cheats" to the transformation sequence to achieve this. He is thus less accurate overall than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. Nevertheless, he maintains a superb level of articulation and posability.
The final scraping was done in Python. A long time ago when I started it, the prototype was in a language called DM or byond. This is a language created for the purpose of writing 2d online rpgs. It was my first language and was easy to pick up but this was pushing its limits a bit. I actually ran the first scrapping on my other post (the Politics one) in this language. The results were not what I used in the article but it was a good proof of concept.
Available exclusively at the Tokyo Toy Show 2012 (along with Prime Shining Optimus Prime), Black Optimus Prime is a very minor redeco of the previously unreleased Gentei! Gentei! black version of Henkei! Henkei! Convoy, itself a redeco of the Classics Voyager Class toy. As such, Black Optimus Prime is mostly cast in black plastic, with some gray parts, translucent red windows and teal paint operations.
A redeco of Legends Optimus Prime replacing his red plastic with more blue and silver, but sprucing things up a bit with red flame paint operations. Defender Optimus Prime (ディフェンダーオプティマスプライム) was only available in Japan as part of their Transformers Animated promotion in March 2010. It was given away for free to customers who purchased Animated merchandise at Edion, Bic Camera and Yodobashi Camera stores.
Prime's personality had been copied onto a floppy disk by Ethan Zachary, the technician running the game. He employed Prime in various video game scenarios he developed. Prime's damaged mind led him to believe that he himself was a video game character and, in an attempt to bring him back to life, Goldbug, Joyride, Slapdash, and Getaway took the disk to the planet Nebulos. They built a new body for Optimus Prime and upgraded it with the ability to combine with the trailer to form a larger robot. In an effort to keep Transformers off their planet, the Nebulans had poisoned their fuel. The sensation of dying, however, convinced Prime that he was truly alive and not a game character. To save his life, the Nebulan scientist Hi-Q bonded with him, creating Powermaster Optimus Prime. A UK story set around the same time in UK #198, Prime returned to Earth and tried to rekindle his feeling for the planet. After a battle between his forces and an advance force from Cybertron ruined a small town's Christmas festivities, he realized that bringing the Transformers to Earth was far worse than anything his troops could have done and vowed to protect its inhabitants from Decepticon aggression.
Here is another thing, people complain about the presence of stickers in a LEGO set. I have news for them, stickers keep down the cost of a set. The latest modular building will have stickers with it, but it isn’t the last time a set geared toward adults will have stickers with it. At least LEGO listened to our wishes and got rid of STAMPS (Stickers across multiple pieces). Still that modular will be the only set that will have a red baseplate and printed golden star tiles. Translation, that set will be very hot on the secondary market when it is retired. It is going to be very hard to source out the baseplate if people try to build Palace Cinema by sourcing its parts. (Which is a project some are doing with Cafe Corner and the UCS Falcon)
Golden Lagoon Convoy is a gold and gold chrome redeco of MP-10 in homage of the original cartoon episode of the same name. He retains his energon axe, ion blaster, and Matrix of Leadership. Part of TakaraTomy's 35th anniversary celebration, he was initially released at Summer Wonder Festival 2018, then later through Cybertron Satellite stores across Japan and TakaraTomy Mall.
Just as Marvel Comics produced a companion comic to the original Transformers toyline that differed from its animated counterpart, so did Dreamwave produce a comic to go along with the Transformers: Armada and Energon lines that owed little to their animated fellows. This incarnation of Optimus Prime, however, is not particularly different from his animated counterpart in personality.
This redeco of Leader-class Optimus Prime replaced most of the plastics in the cab robot with colored translucent equivalents, with chromed silver wrist-pipes, a golden chrome Matrix, and red chrome window frames. His trailer remained opaque, but was cast in much deeper red plastic, with a more metallic silver used for his cannons. He was available only in a Toys"R"Us Japanese exclusive giftset released in October 2005, with a redeco of Wing Saber, and the Coby Sen'yō Rumble.
Part of the first wave of the "Mini-Con Weaponizers" subline imprint, this One-Step Changer figure of Optimus Prime is a new sculpt. In the Robots in Disguise mobile game, it was identified alternatively as an "Advanced One-Step" or "Evolved One-Step" figure depending on the user's region, but on the toy's packaging, no such modifiers are featured, and it is available as part of the regular One-Step Changer assortment. This figure shares most of its engineering with One-Step Fracture.
This reissue of the original Generation 2 Laser Optimus Prime figure was made using the modified version of the mold created for Robots in Disguise Scourge, lacking the sculpted Generation 2 Autobot insignias on the disks featured on the original. It sported a modified deco, with the flat grey plastic on both the trailer and Prime's chest now replaced with silver chrome; additionally, new Autobot symbol tampographs were added to the doors of Prime's cab mode and the front end of his trailer, and a pair of new chest-window stickers featuring an illustration of the Matrix of Leadership replaced the original decals.
This mold was redecoed into Universe Optimus Primal and Beast Wars Telemocha Series DX Convoy, and retooled into Beast Wars Reborn/Beast Wars Tenth Anniversary versus pack Optimus Primal. Takara also created multiple special variants, including all-gold (from Tele-V Magazine, only ten awarded), red and gray (Tele-V again, but only one awarded), and blue-fur (a Comics Bom Bom design-contest prize, only five awarded).
A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.
The original Ultra Magnus figure has been reissued and redecoed several times down the years, and this article strives to list each edition of the figure under its own heading. The first alteration to Magnus, however, was a running change made while he was still on shelves: Originally, his tires were made of rubber and he sported paint on both his small and large robot heads, but this version was soon replaced with one featuring plastic tires and no paint on either head. In addition, the clear yellow plastic that formed his windows was removed from the cab, leaving just holes instead; and his thighs and fuel tanks were left white, as opposed to the vacuum metalized chrome ones of the original release.