A single-packed version of the battle damaged Voyager Optimus Prime toy from the Sam's Club exclusive three-pack. Although the assortment number and the general packaging style seemed to indicate that this might be a Best Buy exclusive, this has been confirmed to be an "international market" exclusive. It has been released in Asia, but will presumably not be available in the USA outside the Sam's Club three-pack.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
One reason that people perceive that the cost of Lego has gone up is that the cost of so many other toys has gone down. You can now buy so much crap for a buck or two that Lego seems like a luxury item in comparison. It’s interesting to look in toy catalogs from the early eighties and see that Lego didn’t seem as costly then because the other toys were all costly as well.
This set's Optimusses are based on the Prime incarnation. The larger Optimus is a smaller, simpler build than the first big kit, and makes use of ball-and-socket parts for increased articulation. It also carries a spring-loaded missile launcher. The Optimus Kreon's tampographs are based directly on the Prime cartoon model, though he carries an energon axe akin to the one from the War for Cybertron games. He also has a clear-blue extra "energon" torso piece.

Released to conclude the 10th Anniversary of the live-action film series, Masterpiece Movie Series Optimus Prime is a brand new mold that transforms from a 25cm-tall robot (a little taller than MP10 Convoy) resembling how the character appeared in the first live action movie into a Kenworth W900 modified Peterbilt 379, with many of the engineering cues being distinctively based and improved on the ROTF Leader Class mold. His transformation takes a whooping 43 steps, making it one of the most complex Masterpiece figures to date! (Although this pales in comparison to MP-36 Megatron's 107 steps.) .

Bumblebee, being the popular character he is, was one of the first five characters inducted into the Hall in 2010, during a ceremony at BotCon; the convention for all things Transformers. He was joined, not surprisingly, by other super-popular transformers: Optimus Prime, Megatron, Starscream, and the Dinobots. Humans enshrined in the Transformers Hall of Fame over the last few years include everyone from director Michael Bay to Peter Cullen (the iconic voice of Optimus).

In the wake of this incident, the transformers managed to reclaim much of Cybertron. Mindful of the dangers of allowing humans like Cobra access Cybertronian technology, Prime sent Perceptor, Grimlock, Arcee, and Bumblebee on a mission to Earth. As it turned out, Prime's fears were well founded. The U.S. government had used parts from Megatron to create Serpent O.R., a cyborg designed to be a perfect weapon. A raid by Cobra allowed it to escape and gather an army of Decepticons on Cybertron, killing Bumblebee in the process. Despite the grief of losing Bumblebee, Prime continued on and rallied his comrades to do the same. Attacking the Autobot capital city, Serpentor's forces proved overwhelming, and Prime surrendered to ensure the Decepticons would cease fire and not kill another comrade. Realizing that Serpentor wanted the Autobot Matrix of Leadership, Prime broke free as Serpentor was distracted, but was unable to kill him. He was promptly attacked and nearly beaten to death by Razorclaw and Motormaster. He was subsequently forced to watch as Serpentor opened the Matrix. In doing so, Serpentor was not only reformatted into a transformer-like mechanoid, but was also shown the futility of the fighting by the Matrix. At this point, Cobra Commander was able to take control of Serpentor's body. In an attempt to stop him, Hawk opened the Matrix and was transformed into a great leader, rendering Cobra Commander comatose. As the Joes prepared to head home, Prime promised to record the Hawk-led humans' future.


The original Hasbro stock photos depict him as having red paint operations on his kneecaps and the sunken ridges around his blue abs that the final product lacks. The photos on the cardback show him with a red Autobot symbol on his truck door and blue plastic instead of grey for the piece just in front of his rear tires. The back photo also depicts his side windows as being the same translucent orange as the front ones, when they are, in reality, a garish solid orange.
Universe Optimus Prime is a redeco of the Robots in Disguise Scourge Spy Changer toy. He replaces most of the black plastic with predominantly red and blue, with silver for detailing, with an overall deco making him resemble the original Optimus Prime. Like most Spychangers, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly.
The Joes discovered a cavern where the people of Cobra-La were growing metal-eating spores as a last defense against Unicron. Flint and Cosmos took a load of the spores into space just as Unicron appeared in Earth orbit. Prime, Hawk and Colton headed deeper into Cobra-La to rescue Firewall and kick butt. Prime was tackled and pinned by a giant bug creature, but made a dramatic recovery and tossed the bug aside. He then took the machine-hating Cobra-La leader Golobulus to task with a single punch. Flint and Cosmos released the spores, which devoured Unicron from the inside and defeated the giant Transformer before he could harm Earth.
1. Color diversity: Back in the 80s, most sets were comprised of a few basic colors; red, blue, yellow, white, gray, and black. It was much easier to acquire a “critical mass” of pieces in each color to start building one’s own creations in coherent color schemes. Space, Town, Castle sets all had the same basic colors. Today Lego uses a much wider array of colors in their sets. While this adds a lot of variety and visual appeal to today’s sets, this means that one has to buy a much larger number of sets (or scour bricklink) to get achieve a workable critical mass of pieces in each color. After buying some of the modern sets, I end up with a few dark-blue or lime-green pieces that I don’t really have enough to much with other than use as accent colors. They end up in my misc color bin in the event I decide to build the set they originally came with or sell them off on bricklink.

© Andrew Sielen and Reality Prose, 2013. Unauthorized use and/or duplication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Andrew Sielen and Reality Prose with appropriate and specific direction to the original content.


In the United Kingdom, this Optimus Prime was released as an Argos exclusive along with several other sets branded as part of the Reveal the Shield subline imprint. His United States release was initially claimed to be exclusive to Target by online retailers from Asia, but even though the other Reveal the Shield products eventually became available at Target, Voyager Class Optimus Prime was released as a Toys"R"Us exclusive in the United States instead, complete with a "Toys"R"Us exclusive" sticker. Also, both his United States and Asian releases lack the "Reveal the Shield" logo the United Kingdom release has (but still feature the "Reveal hidden images" call-out).
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]
As leader of the Autobots, Prime headed up their mission to search for new sources of energy to revitalize the depleted Cybertron. Optimus vowed to Elita that he would return from his mission for her, but just before the launch of the Ark, Optimus was mistakenly led to believe that Elita was killed. Shortly after its launch, the Autobots' craft was attacked by the Decepticons' space cruiser, the Nemesis, and boarded by Megatron and the Decepticons. In the ensuing struggle, the G-forces of a nearby planet pulled both craft down, and the Autobots' ship crashed into a volcano, thrusting all the occupants into emergency stasis. Four million years later, in the Earth year 1984, a volcanic eruption jarred the ship's computer, Teletraan I, back to life. The computer reactivated the Decepticons, programming them with new Earth-based disguise modes. As a parting gesture, Starscream fired upon the Autobot ship, creating a landslide. The vibrations from that landslide knocked Prime into the path of the computer's restoration beam, restoring him to life, thus beginning the war anew on Earth.
The Diaclone Powered Convoy figure had several additional features and modes which were mostly excised or left unmentioned for the Transformers release of Ultra Magnus. Principally, Powered Convoy came packaged with "Powered Buggy", who was left out of Magnus's release (see notes below for further details). Omitted from Magnus's instructions is the ability of his chestplate and super robot head to combine to form a small vehicle; the Powered Convoy version of the figure included small rolling wheels on the underside of the chestplate which were removed for Ultra Magnus. Additionally, three additional modes were included in the Diaclone instructions that Hasbro left out: a "preparation base" mode and an "Autobot base" mode were excluded entirely, while the third, a "catapult launcher" mode originally intended and proportioned to accommodate the Diaclone Jet Robo figure that became Starscream, was shown only on the front of his packaging, interacting with Silverbolt. The Japanese release of Ultra Magnus—released as part of the Scramble City sub-line—did include instructions for the preparation base and catapult launcher modes, but replaced the original Autobot base mode with a new configuration.
The Decepticons' initial strike came abruptly and brutally, devastating entire districts of Metropolis. Optimus was meeting with Hot Rodimus as this took place, and was nearly overcome with grief when Ratchet informed him of the carnage the Decepticons had wrought. Steeling himself, Optimus coordinated the city's defenses, ordering his troops to be dispatched where they were most needed to repel the invasion. Upon spotting an old enemy on one of the nearby monitors, Optimus geared up to go in the field himself. Arming himself with his favorite pistol, Optimus resolved to take down Megatron. Raid
Like many other modern toys, Optimus was designed with an alternate head sculpt (based on the mouthplate-less face as seen on the show) intended for a later retool, which was gang-molded with the original head. At least one specimen sporting the mouthplate-less head has been found at retail, although since this occurrence has seemingly been limited to an isolated incident, it can be assumed to be a manufacturing error rather than a genuine variant.[6] The mouthplate-less head sculpt was eventually used officially for a later-wave redeco, Nightwatch Optimus Prime (see below).

In one of his less impressive moments, after running out of ammo during a battle with Deathsaurus, Optimus Prime ordered his fellow Autobots to improvise and hurl everything that wasn't nailed down at their enemy. This included the Blackball, unfortunately. Catching it, Deathsaurus began to fantasize about his inevitable galactic conquest, all the while being pelted with rocks and litter. Frustrated, Deathsaurus accidentally hurled the Blackball back to the Autobots in a fit of rage. Good Job! Deathsaurus!!
The San Diego Comic-Con 2017 exclusive Optimus Prime figure is another redeco of the Premier Edition figure, which aims for a more movie accurate look than the original by still sharing the same paint masks, but replacing the chest's deco with flames and adding extra paint applications on the legs, arms, chest, head, tire rims, both sides of the engine compartment, and the sword and shield... but for some reason still sports the movie-inaccurate blue 'collar', as well as the smaller, less accurate vehicle flame tampographs instead of the more movie-accurate ones used on Dark Optimus Prime. His Autobot insignia is also moved on the upper back section of the air dam. He is packaged in a stylish, display-case-like-box similar to later Transformers: Alternators releases and the Hasbro Toy Shop/SDCC 2011 exclusive figure.
EZ Collection Gum Convoy is another redeco of Generations Legends Class Motorbreath, featuring the retooled parts, but this time omitting the sword. He is decoed once again in his Generation 2 colors (see above), with the black legs, but uses metallic red plastic, and is coated in metallic red, blue, and black paint. As per the toyline's name, he comes with a yellow candy-shelled piece of lemony-flavored gum.

Available exclusively at the Tokyo Toy Show 2012 (along with Prime Shining Optimus Prime), Black Optimus Prime is a very minor redeco of the previously unreleased Gentei! Gentei! black version of Henkei! Henkei! Convoy, itself a redeco of the Classics Voyager Class toy. As such, Black Optimus Prime is mostly cast in black plastic, with some gray parts, translucent red windows and teal paint operations.
The Jetwing jet pack attaches onto Optimus Prime via a part that hooks onto one of the hinges behind his neck, and a spring-loaded clamp that latches onto a recessed area under Optimus' back. The fuel tanks that form Optimus' Ion Blaster must be removed for this mode, and they can be stored inside the engines for the jet pack. The Jetwing can be used on previous Leader Optimus Primes from Revenge of the Fallen onwards, but due to the lack modifications seen in Jetwing Optimus Prime, the combination isn't as stable. The jet pack features four MechTech ports on the main wing articulation points, and two C joint mounting points on each wing. The Gatling Cannons both feature two MechTech ports and 2 C joint mounts on either side of each cannon.
A re-release of the Leader Class figure from the Revenge of the Fallen line, but with retractable forearm hooks (as seen in his battle with Grindor) in place of the blades.[113] In addition, the figure comes with the unmasked head of Buster Optimus Prime and is painted with battle damage effects. A recording of Peter Cullen saying, "We must stop the Decepticons!" is played when his chest is pushed upward via a lever on his waist.[114] Fans have nicknamed this figure "Battle Hooks Optimus Prime" to distinguish it from the other Prime figures.[115]
A Voyager class figure that transforms from semi-trailer truck to robot. Head features retractable face plate. The figure's main gimmick is a spring-loaded mechanism that spins the lower torso during transformation to robot mode. Trailer detaches and transforms into a giant Ion Axe or jet pack. Prime's gun can be filled with a small amount of water. Some variants of the figure come with the Autobot symbol printed on his left shoulder while others do not.
If they took the left passageway, the group happened upon Megatron’s lab. Though Megatron attempted to trick Optimus into activating the Fortress’s self-destruct sequence, Optimus was too clever to be duped. After deactivating both the Destruction beam and the Decepticons themselves, the Autobots found Jessie tied up in a cell. The Autobots then celebrated their victory by guzzling a few quarts of fine-grade oil.

Bumblebee had many adventures in his bizarre humanoid form. He wound up in the heart of Cybertron to find the resting place of the creator/god of all Transformers, Primus, and learn of their origin as a race. Later, he went on a quest to find the all-powerful Creation Matrix, also known as the Autobot Matrix of Leadership, but stumbled upon the Cybertronian Decepticon commander, Thunderwing, who blasted away Bumblebee’s Pretender shell.
After the events of Transformers Animated the Stunticons set up a Stunt Convoy show in the city of Kaon and use it as cover to attempt to break Megatron out of his detention at Trypticon. Their attempts are thwarted thanks to the efforts of Cheetor, Optimus Prime, and Sideswipe. The Stunticons are placed in detention with Megatron and an attempt to rescue them was made by the Decepticons Blot, Mindwipe, Oil Slick, Scalpel, Sky-Byte, and Strika.[143]
A heavy retool of Combiner Wars Ultra Magnus, this Optimus Prime is based on the Powermaster Optimus Prime toy from 1988. Despite this, Hi-Q (now renamed 'Autobot Apex', presumably for trademark reasons) doesn't form the engine on Prime's chest; instead, he transforms into a de-faceplated version of the original Powermaster Optimus Prime cab robot head, over which a helmet slides during transformation to complete the Powermaster Prime look. In all three of Optimus Prime's modes are various pegs and seats with which Titan Master figures can interact. Like other Leader Class figures, his base mode can connect to other Titan Returns figures with base modes.
During the May 30 launch event for the Revenge of the Fallen toyline in Japan, Legends Optimus were given out to attendees. The only difference is a sticker on the packaging commemorating the event. Optimus also saw release as a blindpacked figure for the first wave of the Revenge of the Fallen EZ Collection sets. And like all first waves, he comes with a flyer advertising the TakaraTomy releases of the Revenge of the Fallen toyline. His pair of legs is also mistranformed to fit in the bubble.
The largest Movie Optimus Prime toy (until Revenge of the Fallen, that is), Leader Class Optimus Prime features the most accurate representation yet of the CGI designs' complex transformation sequence, the only difference being the arms which are placed behind the cab while they constitute the hood in the CGI model. He transforms into a heavily-customized Peterbilt 379 conventional extended-hood, and unusually for a mainline figure, he has rubber tires on all his wheels. His Ion Blaster weapon is stored in the rear of the truck's bunk, exposed like an engine block. Though Optimus has no trailer, he has a hole where the fifth wheel (known among fans as a 'hitch') is sculpted in the rear of the truck, should owners find a suitable trailer to use. Due to safety reasons, the tips of his long smokestacks are made of rubber. A switch on top of the cab roof activates horn sounds and window lights.
According to an early Universe-style profile published in The Transformers Comics Magazine, Optimus Prime's "official" nicknames were at one point considered to be "Autobot Commander", "Chief", "Big Boss" and "Roller". As far as it is known, no piece of fiction has ever purposely addressed him using these nicknames, though it's a fair bet he's been called "chief" at least once or twice anyway. And technically part of him is called "Roller" with some frequency.
A redeco of the Wing Convoy Super Real Figure, Wing Convoy Original Figure (ウイングコンボイ オリジナルフィギュア) was available at JUSCO department stores starting on July 30th 2004. The figure was available with purchase of a Wing Saber figure, and came in a plastic baggie, rather unattractively scotch-taped inside the toy's packaging. A sticker was placed on Wing Saber's packaging to note the promotion.
The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco to Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.
When Vector Prime reminisced on some of the highlights of his multiversal career, he remembered many events involving Optimus Prime. Among these events was Optimus Prime using the Matrix of Leadership on the Hate Plague, Shockwave taunting a disembodied Optimus Prime, and Megatron firing on the head of Optimus Prime, creating a time storm that necessitated Vector Prime's intervention to ensure Optimus Prime's survival. Vector Prime: In the Beginning
In 1989, the entire line became limited to Pretenders and Micromasters. For the first time, the Transformers received a new design for their title logo. But many also regarded this as a time of a dearth in creativity and the lowest point in the toyline's history. The year 1990 saw the last American burst with the release of more Micromaster characters and the introduction of the Action Masters, non-transforming action figures who came with Transforming companions. Larger Action Master sets came with transforming vehicles and bases. The Action Master line was criticized for its perceived desperation for a gimmick, although it had a few defenders. The line predictably faded and would be the last Transformers output in the US until 1992.
The project was crowd-funded through Japanese crowd-funding site Makuake[11]. For 5,400 yen, contributors received an INFOBAR Optimus Prime, or for 16,200 yen, received INFOBAR Optimus Prime, INFOBAR Megatron and INFOBAR Bumblebee, the only way to obtain the last two items. The project received one million yen in the first 24 hours, ultimately topping out at over 32 million yen.
If Optimus ordered his troops to attack the Decepticon base, they soon reached an area free of the anti-gravity beam’s influence. They were then attacked by a small fleet of Decepticons. Optimus targeted their squad leader, Dirge, knowing that by downing him, the Decepticons would be significantly demoralized. Dirge was forced to break-off his attack when his back-up was taken out, knowing he wouldn’t be able to take Optimus on without it. Losing their advantage quickly, the Decepticons retreated. But with the battle over, the Autobots noticed a small human boy at their feet. The boy was Buddy, a stowaway from the nearby town, and though Optimus was displeased with the tag-along, the Autobots could not spare the time to bring him home. Arriving at the Decepticon base, Megatron delivered an ultimatum; if the Autobots did not surrender Optimus Prime to the Decepticons immediately, he would use his gravity beam to have the nearby humans float off into space.
Rodimus Prime/Minor is a character who appeared in season 3 of the Transformers Animated series. He is a homage to the Generation 1 version of the character Hot Rod.[17] He wields an energon bow-and-arrow weapon of his own design.[18] On March 31, 2009, Derrick J. Wyatt, lead Transformers Animated Character Designer posted an image of Rodimus' vehicle mode, which is described as a futuristic muscle car that is mostly based on a 2008 Dodge Challenger with some elements of a 1969 Ferrari Daytona. This was revealed at the 2009 BotCon where Hasbro released an action figure of Rodimus Minor. It showed that the 2008 Dodge Challenger parts of Rodimus' vehicle mode were mostly based on the back, top, and sides of the vehicle, while the 1969 Ferrari Daytona parts were found in the front of the vehicle, most notably, the headlights.
A redeco of the Generation 2 Go-Bot Firecracker, Go-Bots Optimus Prime transforms into a red Hot Wheels-sized Lamborghini Diablo. Like all Go-Bots, he features high speed axles and can roll very well across smooth surfaces, but lacks the weight to propel him quickly. He is armed with a small red laser rifle. The plastic colors are a "solid" version of Firecracker's color layout, substituting opaque red for transparent red plastic.
In Axiom Nexus, General Optimus Prime found himself inducted into the Convoy, a group of Optimus Primes and their kin dedicated to safeguarding the multiverse. While the other Convoy members tended to stay in the upper reaches of Axiom Nexus, the General was able to use his unusual appearance for an Optimus Prime to venture in the Offworlder zones without suspicion, a great help to Offworlder Zone Security Administration Commander Cheetor. The General was also assisted in his new mission by his longtime scout, Sergeant Hound. General Optimus Prime profile card Sgt. Hound profile card
Following this, Prime began to experience subconscious urgings, leading both the Autobots and the Decepticons to the Arctic Circle, where Shockwave arrived to greet them—and arrest them as war criminals. Shockwave had succeeded in ending the war on Cybertron, and brought a team of Triple Changers to apprehend them. As Optimus stared down Blitzwing's cannon barrel, he was saved by Grimlock, though he subsequently had to order a retreat. Prowl convinced him to let a small team stay as recon while the others returned to the Ark and discussed the change in situation. New World Order Though Optimus was puzzled by Ultra Magnus having fallen in with Shockwave, he had little other choice, and surrendered to Magnus. Despite being bound, he took the first opportunity he got to make his feelings clear. Prime and those of his Autobots who had also surrendered were put on a shuttle back to Cybertron, where Shockwave planned to have them deactivated. Brothers' Burden
The Autobots and the Decepticons came to a distant world in the grip of an ice age. Assuming alternate modes based upon the dominant (though doomed) indigenous creatures of this planet, they continued their ancient, unending war. However, the Autobots, with their energy levels dangerously low, withdrew from combat as the world grew colder. They sought refuge in a deep cavern and entered stasis lock, awaiting the day when surface conditions changed to better suit their operation. Hearts of Steel #1 Optimus lay under the Mare Rurek Glacier. Infestation 2: The Transformers #1 Millions of years later, Bumblebee was awoken by the hammering of humans working on a rail line. He briefly considered awakening Optimus Prime, but thought better of it. After discovering the world had changed significantly, Ratchet thought there was no reason to awaken Prime. Hearts of Steel #1 When Bumblebee discovered the Decepticons were once again active on this world, Ratchet and Prowl agreed that the Autobots must intervene, but again decided out of rousing Optimus from his slumber. Hearts of Steel #2
Kiss Players Convoy is a redeco of Alternators Optimus Prime. Unlike the Alternators version's bare red plastic, he is covered in a deeper red paint. Some of his body parts are cast in different colours, such as his shins, and has a much more intricate paint deco based upon Masterpiece Convoy. He is armed with his small engine pistol and a pink surfboard that can be reconfigured into either two small blades or a large double-bladed sword.
The TakaraTomy version of Premium Series Optimus Prime has a considerably different deco to Hasbro's release. Similar to the unique chrome Optimus Prime, Optimus Prime Battle Mode features vacuum-metallized parts for nearly all of the silver truck parts, for a greater resemblance to the polished chrome on the real prop trucks. Unfortunately, as his feet are the front fenders and grill, this will likely lead to chipping. In robot mode he retains several decos that were removed from Hasbro's Premium Optimus Prime for cost reasons, such as the blue and gold decos on his thighs. Finally, the flip-out energy sword is coloured gold to reflect its "powered up" appearance.
Mission Racer Optimus Prime features a pull-back gimmick by using a rubber band: insert the rubber band onto the front and rear post, then place Optimus Prime onto the ramp and pull his trailer backwards, and release the trailer for allowing the truck to zoom forward. The rubber band also has Optimus Prime's name and the Autobot insignia tampographed oh it.
Created with the specific purpose of producing an Optimus Prime as accurate to the original animated series as possible, the toy is exceptionally poseable, partially constructed from die-cast metal, features rubber tires and vacuum-metalized plastic and is heavily detailed, with sliding pistons in its joints and working spring-loaded suspension in vehicle mode. The figure also contains multiple non-intrusive gimmicks, such as a moving mouthplate to emulate Prime's traditional method of speech, flip-up communications panels on the forearms depicting images of Bumblebee and Starscream, and an opening, light-up Matrix chamber in the chest, which contains a removable vacuum-metalized Matrix of Leadership that can also be pulled open.
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth. With the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.
As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures.
He comes with the Star Saber, which has a 5mm handle and a post on its hilt, as well as two spring-loaded, missile-firing "Ionic Pulse Launchers" (which are called "Eaglefire Missile Launchers" in the instructions). The launchers each feature a 5mm post, have flip open prods, and can peg onto the ports near the wheels on his robot back, giving him a pair of back-mounted rocket engines.
Released exclusively in Asia, Shadow Spark Optimus Prime is a redeco of the Age of Extinction Leader Class Optimus Prime, featuring dark grey plastics, weathered deco patterns, and some opaque plastic which was recasted from transparent plastics. He features a scratched Autobot insignia on the right side of his sleeper-cab, and a Cyberglyphic on the left side of the front hood. Some weathered parts does not match well with some other parts (the fenders, for example).
Optimus Prime is then informed that Megatron has infected the core of Cybertron with dark energon and is given the task to undo the damage done. After rescuing Omega Supreme, Optimus, Ironhide, and Prowl fight their way to the core, but it's too late. The core informs Optimus that it is far too corrupted. It can repair itself by shuting down, but it will take millions of years. By that time, Cybertron will have to become cold, barren, and uninhabitable. The core gives Optimus a small piece of itself, saying it will still survive as long as the piece does. Optimus accepts the burden and the core relinquishes the Autobot Matrix of Leadership.
The Transformers toy-line is typically divided into two main factions: the heroic Autobots and their opponents, the evil Decepticons (traditionally known in Japan as the Cybertrons and Destrons, respectively, although more recent releases often using the English terms). Transformers toys are sold at a number of price points, and various Transformers series utilize unique play features.
An all-new Leader class figure of Optimus Prime, featuring a robot design and transformation that is closer to its film counterpart than the 2007 toy version. Features retractable blades on both forearms. New "MechAlive" feature consists of visible moving gears in the chest behind the cab windows. At the push of a button on the back of the cab, the truck mode emits an engine idling sound. The transformation sound is played when the upper torso and lower torso are connected. A recording of Peter Cullen saying, "I am Optimus Prime!" is played when his chest is pushed upward via a lever on his waist.[97]
Prime was brought back to the Autobot base for treatment, but the Decepticons exploited the Autobots' lack of manpower and struck again before Prime recovered. With his men taking a pummeling, the unconscious Prime had a vision of Akira, who spurred him on to awaken and rejoin the battle. With another power boost from Wataru, Prime unleashed a super-charged shot from his ion blaster that took down the fleeing Decepticons. Time of Resurrection

Available only with the Bot Shots Dragon Track set, this version of Optimus Prime is a new mold, changing from a robot form resembling Generation 1 Optimus Prime, into a truck with a rocket exhaust molded into the back of its trailer. As a Flip Shot, he, er, flips up when auto-transforming. He comes with a launcher that can be connected to the track, as well as Flip Shot Megatron and his launcher.


Early in the war, when he was still known by the name Orion Pax, the Autobot who would one day be known as Optimus Prime was ordered by Zeta Prime to escort the Decepticon Prisoners Wrack'n'Ruin in a prisoner exchange, while accompanied by Nightbeat and Alpha Trion. As the group made their way through the Rust Spot, they encounter Slicers and had to fend them off. Orion Pax and his group eventually made it to their meeting spot with the Decepticon Bludgeon, only to be ambushed by the Decepticons. In the confusion, Alpha Trion was taken prisonner, and Orion Pax set off to rescue the elderly Autobot. He and Nightbeat succeeded in returning Alpha Trion under the protective custody of Zeta Prime, but Orion was himself captured in turn. Strapped to a shuttle aimed to crash into Iacon, Orion's fate seemed uncertain. Orion's Gambit

While they wandered through the tunnels, the Joes and Prime found cave paintings that described the last visit to Earth by the planet-eating god Unicron. They were attacked again by Bludgeon and Cobra-La minions, but were led away by a ragged Joe Colton, prisoner of Cobra-La for the last 25 years. Black Horizon, Part 1 of 2 Bludgeon managed to find them again and during a second battle Prime tore open the Pretender's shell, revealing Bludgeon's robot form inside. Bludgeon tripped and dangled dangerously over a chasm, but rather than let Optimus Prime save him, Bludgeon forced Prime to drop him to his death laughing all the way down.


The Goldbug change happens in many different continuities, but in the original animated series, it happens like this: while trying to rescue the body of the dead Optimus Prime, which was being held by evil humans, Bumblebee’s damaged by Superion so badly that they have to rebuild him as a more powerful Throttlebot. His new body is much shinier, so a restored Optimus Prime dubs him Goldbug. In the Shattered Glass continuity, he goes evil as Goldbug. And in the IDW comics, confusingly, Goldbug was never affiliated with Bumblebee, but is the leader of the Throttlebots.
Late in 2008, this version of Optimus prime was one of four Classics figures repainted into HasbroToyShop.com exclusives (the other three being the Megatron from this set in G1 colors, Grimlock repainted into Overkill, and Mirage repainted into Dragstrip). Unlike those three, it's debatable just how much repainting went into Optimus, but he comes in a snazzy new box.

The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.

×