They’ve been invaded by pop culture favorites, too. Robot Chicken turned the couch gag into stop-motion animation, they’ve parodied Breaking Bad and the Game of Thrones opening sequence, and the living room has gone all topsy-turvy M.C. Escher-style. But best of all, for our purposes, was when the five Simpsons drove into the living room as familiar vehicles, then transformed into robo-Simpsons. Baby Maggie was a blue Volkswagen Beetle, clearly as an homage to Bumblebee, despite the odd color choice. Perhaps it was it was switched to match her onesie.
Sold at the rather exorbitant price of $75, this re-release of the original Generation 1 Optimus Prime toy is actually one of the most visually different from the other "straight" reissues of the mold, despite Hasbro's assurance that this is the toy you had as a kid. Positively anemic in comparison with the original toy, this Prime's red parts are visibly paler than usual, while his blue parts are much lighter (although the version released at Canadian retail reportedly sports a deeper shade of red again). This shade of blue extends to both Roller (a lighter blue than his traditional dark shade, yet darker than the lightest the figure has been in its history) and the internal workings of his Combat Deck, which is itself a much flatter shade of light grey, compared to its normal dark, swirled metallic silver color. In addition, the toy features the now-customary shortened smokestacks, and the elongated missiles seen on the Commemorative Series release. While all reissues of the Prime mold since 2003 have used the original thick-barreled mold for his ion blaster, this version includes the slender sculpt instead.
Released as part of TakaraTomy's Welcome to Transformers 2010 campaign, the "Sons of Cybertron" set includes a redeco of the 2006 Classics "Ultimate Battle" pack Deluxe class Optimus Prime, cast mostly in translucent plastic (his shoulders remain opaque Polyoxymethylene (POM)). He comes packaged with a similarly translucent redeco of Classics Rodimus.
I had a transformers armada (ew) style Megatron with horns like a stag beetle that would turn into a tank. I actually liked the whole design and was upset when my sis broke it on purpose. She'd always tell on me for stupid shit so I saved this incident as a trap card for later. Too bad this sort of thing had a statute of limitations in our house lmao.
Optimus was made available as a mail-away toy in the "Digital Doom on the Highway to Destruction" offer in the US in 1986 to coincide with the Transformers movie in 1986. He cost $21.50 and 5 robot points, and came with a special Movie Edition Certificate and a round sticker that read " Movie . Edition . Transformer" with the Autobot symbol in the middle. (This item is considered rare.)
A redeco (or should that be de-deco?) of the Grand Convoy Super Mode Pla-Kit, Grand Convoy Super Mode White Version was available exclusively on July 17th and 18th at the Japanese convention, Kodansha Super Chara Festival 2004 ("K-Fest"). It is a solid white version of the normal model kit, possessing all the features of the normal figure, which was intended to be used in a customization/painting contest held at the convention. It lacks the comic of the normal release.
Part of the sixth wave of Custom Kreons, and the first (and only) Robots in Disguise-themed wave, Optimus Prime uses the new 2015 Kreon construction with the hollow waist-peg and "raised" hands.. He comes with a buildable parts rack on which to hang/store his extra pieces. Unlike the previous Custom Kreons, he no longer features a chromed helmet, and comes with an extra clear-plastic helmet, torso, legs, and his arms, plus a chromed Bazooka (originally from the Kre-O Battleship sets), and some kind of a dual pick-axe with a clear red staff.
Similar to the Activators toyline, One-Step Changer Optimus Prime features a spring-loaded transformation. He features swivel articulation in the head and both arms. He shares a similar (not identical) transformation with his fellow One-Step changer, Hound. Also, due to his transformation scheme, his shoulders can be pushed forward (the arms is pushed on the same time), which also allows him to wield a close ranged weapons with longer handles with both hands.
In 1989, the entire line became limited to Pretenders and Micromasters. For the first time, the Transformers received a new design for their title logo. But many also regarded this as a time of a dearth in creativity and the lowest point in the toyline's history. The year 1990 saw the last American burst with the release of more Micromaster characters and the introduction of the Action Masters, non-transforming action figures who came with Transforming companions. Larger Action Master sets came with transforming vehicles and bases. The Action Master line was criticized for its perceived desperation for a gimmick, although it had a few defenders. The line predictably faded and would be the last Transformers output in the US until 1992.

Part of the first wave of the Combiner Force assortment, Optimus is a roughly Scout-class sized figure that changes from his futuristic truck with a combiner chest that doubles as his spoiler into a robot in three four extremely simple steps. His individual robot mode only has limited articulation on his shoulders. He also has a little green arrow above the connector on the truck bumper indicating where to crash him to combine with other figures. A 5mm post hole on top of his vehicle mode can accommodate a compatible accessory or Weaponizer Minicon, though he cannot use it in his individual robot mode.

Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.
A repaint of the Armada Supercon Optimus Prime, minus the Mini-Con, but instead had a Cyber Key with a Mini-Con port in it. Repainted to match Cybertron Galaxy Force Optimus Prime. This is supposed to be a drone which Optimus Prime controls to get into small places, built for him by Metroplex. Several paint variations of this toy exist, and early releases have the forearms swapped, just as had occurred with the last repaints of the mold.[61]
The subject of Bumblebee’s voice is a bit of a complicated matter. Just as he was the second Transformer ever seen on the original TV show, he was also the second to speak and did so in the loud and clear voice of Dan Gilvezan, who voiced him throughout the original series and animated movie. But by the time we get to the first live-action movie, he could only talk via audio clips because, according to a prequel comic, Megatron had destroyed his voice capacitor during a battle on Cybertron.
As one of the first Transform Jr toys, this version of Optimus Prime was released under the early name for the series, Transform Gōkin. As a smaller, simplified version of the original Generation 1 Prime figure intended as a low-cost alternative for younger children, Prime features a similar transformation, with a removable head in addition to fists, but lacks rubber tires and translucent windows. As with most other Transform Jr figures, he lacked any of his major accessories, coming only with his rifle and a cardboard replacement for his trailer that had to be assembled by the buyer.
In yet another possible scenario, Beachcomber returned from his day off early to inform Optimus that Jessie had been taken prisoner by the Decepticons. Optimus deployed a team of Autobots to go to the girl’s rescue. Shortly before arriving at their destination, the Autobots had to choose their next course of action; they could either storm the Decepticon fortress by force, or try to sneak in through a secret passage Buster had previously discovered.

Part of the first wave of Prime: First Edition Voyager-Class toys, Optimus Prime transforms into a truck, with a similar (but more complex) transformation to his previous Deluxe-Class toy, and features a faux-kibble window-chest panel as well as a detailed truck cab interior. He comes with a "Cybertronian battle sword" and a "plasma cannon", either of which can peg into his hands. The cannon also features a 5mm peg-hole on the underside of its barrel, allowing the sword (or any other compatible accessory) to mount there as a bayonet. They are stored in vehicle mode by pegging them onto either the 5mm-compatible trailer hitch, or onto each peg-hole beside it, although the instructions tell you to peg the sword facing forwards onto the hitch, with the cannon mounting backwards onto one of the side pegs. His trailer hitch ends up on his right robot leg, and he has a fake, sculpted, equally-usable trailer hitch on his left leg. He features a cardboard stand as with all "First Edition" toys, but the weak adhesive used for its flaps mean it often has trouble supporting the weight of a Voyager class figure for an extended amount of time, the top caving in as the glue gives way.
The earliest releases of Energon Optimus Prime have no ridges on the inside of the chest windows and a different head sculpt featuring an Optimus Primal-style mouth-slit in Prime's mouthplate. This was soon replaced with a full mouthplate, and it was this version of the toy which appeared in the Energon cartoon and was released by Takara. Other changes made to Takara's version of the toy involved a chromed front grill, more vibrant plastic colors on Digger-3 and Submarine-4, a darker blue plastic on Prime himself, and more intricate paint operations. Takara's release lacks the electronic sound effects seen in Hasbro's version, which were commonly gutted for the Japanese releases of any Autobot toys who had them, though Prime retains his light-up chest.
The final scraping was done in Python. A long time ago when I started it, the prototype was in a language called DM or byond. This is a language created for the purpose of writing 2d online rpgs. It was my first language and was easy to pick up but this was pushing its limits a bit. I actually ran the first scrapping on my other post (the Politics one) in this language. The results were not what I used in the article but it was a good proof of concept.
Optimus Prime is among the three Autobot figures available to play in the Monopoly Transformers Collectors Edition game.[28] As the figurehead of the entire Transformers franchise, Optimus Prime has been on more pieces of merchandise than can be stated here. Several statues and busts of Optimus Prime as well as Optimus Prime themed objects have been released by various companies since the return of Transformers to prominence, such as the "Optimus Prime Oral Care Station". Other figures released include various PVCs as part of Takara's "Super Collection Figure" line, which were later imported as part of Hasbro's "Heroes of Cybertron" series. Larger "Mega Collection Figure" PVCs were articulated and came with energy axe and gun figures. As part of the merchandising wave for the first Transformers film in 2007, Hasbro's Playskool line released a Transformers-themed version of Mr. Potato Head based on Optimus Prime. To keep with the potato theme, the toy was labeled "Optimash Prime" and the packaging included the slogan "More than meets the fry", a potato-oriented version of the Transformers slogan "More than meets the eye".
A redeco of of the Cyber Commander toy above, this Prime features grey plastic replacing the original blue, some deco differences on the arms, body & legs. He also features a flame tampograph on the sides of his vehicle front. He comes in an altered packaging that replaces the first version's painted prototype stock photos with CG renders depicting the new deco, and also features a new Hasbro product code number, thus making him officially a separate product rather than a drastic running change variant.
If Optimus instead followed Prowl’s plan, he instructed his troops to transform into vehicle mode and play dead. The Decepticons, believing the Autobots’ ruse, disarmed themselves in order to carry out the Autobots’ “carcasses.” Now with the element of surprise against unarmed opponent, the Autobots Transformed and were able to easily defeat the evil robots.
For the 1987 and 1988 lines, Hasbro introduced even more radical ideas through new sub-groups. The Headmasters and Targetmasters came with partners who transformed into the figure's head or weapon, respectively. Powermasters, including the new version of fan favorite Optimus Prime, came with partners that transformed into engines. Each line would see various permutations over the two-year span, including smaller Headmasters, Double Targetmasters, and a Powermaster with two engines.
Prime suffered a severe, though unfair, defeat when Megatron challenged him to one-on-one combat while imbued with the different abilities of all the Decepticons. Teletraan I, the Ark's computer, discovered the deception in time, and the Autobots were able to drive off the Decepticons. In "Prime Problem", Megatron created a clone of Optimus, which caused confusion with the other Autobots. Windcharger and Spike, however, were able to identify the clone before it led the Autobots into their demise.

Part of the first wave of Transformers: Robots in Disguise Hyperchange Heroes, Optimus Prime transforms from a futuristic trailer truck to robot in just 3 easy steps! His arms & legs serve as his trailer, while his chest serves as his truck front. He is also one of the few Robots in Disguise Optimus Prime toys which does not feature a faux window chest in robot mode. Both of his arms are articulated with 5mm holes in each hand.
Transformers: War for Cybertron was released in June 2010 for the PlayStation 3, Xbox 360, and Nintendo DS. The game takes on Cybertron during the Great War between the Autobots, led first by Zeta Prime and then Optimus Prime, and the Decepticons, led by Megatron. Transformers: Cybertron Adventures was released alongside War For Cybertron for the Wii and utilizes the same characters and setting.
Instead of his trailer, Prime can alternately combine with Armada Jetfire, who forms a pair of legs, as "Jet Prime" (Jet Optimus on the cartoon, or "Jet Convoy" if you own the Japanese version). In addition to this, Armada Overload can form a pair of massive cannons that attach to either Prime's base mode, or mount over the shoulders of his super robot torso (with either his trailer or Jetfire as legs), forming Optimus Prime Megaweapon (or Magna Convoy).
Optimus Prime features a MechTech Blaster that can convert into an Energon Battle Axe reminiscent of the Generation 1 character's iconic weapon, though the weapon cannot be locked in battle axe mode. There is also a pair of C joint rods on the underside of both forearms. His MechTech blaster can plug into the port on each of his arms or be held in either hand in robot mode, or plug into one of two holes on his truck roof/robot shoulders.
Generation 2 Optimus Prime comes with all his original accessories, as well as two major new play features. To increase his arsenal, he is armed with a pair of black missile launchers that fit in his fists and fire red spring-loaded missiles; these launchers were retooled from the G.I. Joe figure Barricade. Secondly, he comes with an electronic "sound and lights module" that can either plug into the front of the trailer (where it resembles the air conditioners used on refrigerated trailers), or hook onto Optimus's back in robot mode (via a new slot sculpted into the cab robot). Unfortunately, the soundbox is heavy enough that doing so can easily overpower Prime's hip joints, causing him to topple backward. The soundbox features a large, vacuum metalized Autobot symbol on its front, and three grey buttons which trigger two flashing red LEDs on either side of the module, and a trio of sound effects: a truck engine noise, a laser gun sound effect and a garbled voice that said "I am Optimus Prime!". The module also features ports on either side into which the missile launchers can peg.
Categories: Art FeatherAstronBeelzeboss StudioBTS ToysCHMSDaCa ToysDMY StudiosDr. WuDream FactoryFansProjectFansToysGeneration ToyHeadrobotsHeerotoysmakerIGearImpossible ToysJunkion BlacksmithJustIToysKaziKOLDMaiden JapanMaketoysMastermind CreationsMasterShooter CollectiblesMech IDeasMGSPerfect EffectPlanet XPlay With This TooRenderformReprolabelsToyworldTransformersTFC ToysWarbotronX-TransbotsXovergenYom-GZenith Forge

It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
The largest Action Master set, this incarnation of Optimus Prime is a non-transforming action figure which comes with the "Armored Convoy", a large, heavily armed tractor trailer. The cab of the truck transforms into a small jet that can seat one Action Master figure, while the trailer itself converts into a larger battle station with turrets that several Action Masters can man. The sculpt of the Prime figure itself is closely based on his character model, albeit with a coloration that seems to have been based at least partially on the small robot form of his Powermaster body.
This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.
Legion Class Optimus Prime is a redeco/retool of the first Revenge of the Fallen Legends Class figure, with the deco resembling the paint job from Optimus Prime's Western Star "5700 OP" concept truck. While the main body is identical to the figure, the arms and legs are newly tooled, with simple assemblies for the wheels. The retooled legs now features a more solid stopping point, which prevents the center front grill/legs to swing back further. It should be noted that his flame decals are painted over the side windows.
A re-release of the Leader Class figure from the Revenge of the Fallen line, but with retractable forearm hooks (as seen in his battle with Grindor) in place of the blades.[113] In addition, the figure comes with the unmasked head of Buster Optimus Prime and is painted with battle damage effects. A recording of Peter Cullen saying, "We must stop the Decepticons!" is played when his chest is pushed upward via a lever on his waist.[114] Fans have nicknamed this figure "Battle Hooks Optimus Prime" to distinguish it from the other Prime figures.[115]
Available exclusively at the Tokyo Toy Show 2012 (along with Prime Shining Optimus Prime), Black Optimus Prime is a very minor redeco of the previously unreleased Gentei! Gentei! black version of Henkei! Henkei! Convoy, itself a redeco of the Classics Voyager Class toy. As such, Black Optimus Prime is mostly cast in black plastic, with some gray parts, translucent red windows and teal paint operations.
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt. However, due to the aforementioned lessened complexity, significant sacrifices had to be made, such as "cheats" to the transformation sequence to achieve this. He is thus less accurate overall than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. Nevertheless, he maintains a superb level of articulation and posability.
If Sparkplug suggested that the Autobots not worry about subtlety, the entire squad transformed and began prowling the streets in search of Decepticons. Oblivious to the panic they were causing, Optimus assumed that the Decepticons were spotted nearby when a police officer declared that the city was under siege by giant robots. Unable to restore order in time to halt the Decepticons’ plot, Optimus and the rest of his team were destroyed in the ensuing earthquake.
The Transformers Adventure Easy Dynamic Series release, titled "Big Optimus Prime", features extra paint details and has two additional Autobot symbols on his shoulders. He also includes a different scannable badge, which is compatible with TakaraTomy's Transformers Adventures app. Scanning this will unlock Big Optimus Prime in the collection list. Unlike the American release, Big Optimus Prime is packaged in a windowed box, instead of an an open package.
"Bot Shots" Optimus Prime had many confrontations with his Megatron counterpart, crashing into each other in vehicle mode and then slugging it out in robot mode. Battle for the Matrix Bot Shots commercial Bot Shots Dragon Track Commercial One Bot Shot Optimus and Megatron belonged to neighbours, and taunted one another when their owners left for school. They both burst out of their respective houses, destroying the windows on the way out and colliding in mid-air. Battle for the Matrix Bot Shots commercial
An enormous statue of Optimus Prime, bearing two Golden Disks, could be seen on Cybertron in front of the Hall of Archives. The statue was subsequently blown to pieces by the Vehicon forces. Fires of the Past Later, Megatron beamed a hologram of Optimus Prime down to the ruins of Iacon to confront Optimus Primal, claiming to contain the "essence" of the real Prime that had been stored here since the Final Battle. Primal was conned by this and was tricked by the hologram into accessing the Oracle. Megatron seized control of the Oracle code and quickly revealed his ruse. Primal explained to his Maximals that he knew the image was fake, but he needed the location of the missing sparks from Megatron's mind. The Search
Part of the first wave of Transformers: Robots in Disguise Hyperchange Heroes, Optimus Prime transforms from a futuristic trailer truck to robot in just 3 easy steps! His arms & legs serve as his trailer, while his chest serves as his truck front. He is also one of the few Robots in Disguise Optimus Prime toys which does not feature a faux window chest in robot mode. Both of his arms are articulated with 5mm holes in each hand.
Due to the interference of Ravage, the same as the one who appears in the Beast Wars, most of the events of the original animated feature do not transpire. The most influential of these events is the Battle of Autobot City. Because this battle did not occur, Optimus Prime and Megatron do not have their final showdown. This means that, for this continuity, Optimus Prime does not die and Megatron is never reformatted into Galvatron. As a result, Optimus Prime is able to lead the Autobots during the Binaltech saga.
The problem there is that Star Wars took over the Space theme and Harry Potter took over the Castle theme. Just keeping up with the kids- sign of the times. What’s a castle lover to do? Compare 6075 (Castle) with (7094 Kings Castle Siege) and 4757 (Hogwarts) and they all have their own fantastic attributes. Sell the Harry minifigs and buy some crownies- problem solved.

Softimus Prime is, as his name suggests, a plush G1 Optimus Prime toy. Obviously, he has no problems with articulation and passes the drop test with flying colors. His main draw is the ability to "transform" into his Freightliner FL86 vehicle mode by turning the plush toy inside out, his transformation roughly similar to the Powermaster cab Prime's. He is love, in bed.
Hot Rodimus also appeared in the Japanese exclusive Kiss Players storyline. In the alternate timeline of Kiss Players, Hot Rodimus has given up the Matrix to Ultra Magnus after his actions in hurling Galvatron out of Unicron's body resulted in the Decepticon leader crashing into and devastating Tokyo, rather than landing on Thrull, as seen in the original continuity. He subsequently came to Earth to try to repair relations with the humans, but was instead attacked and nearly killed by a Legion Creature, a hybrid created from Galvatron's Unicron-corrupted cells fusing with local creatures. He was saved by a kiss from the human Li Shao-Shao and reformatted into a body resembling a Ford GT. He went on to battle the Earth Defense Command (an anti-Transformer organization), the Legion - and Optimus Prime himself. Prime had been resurrected in a Kiss Player body, but Hot Rodimus, believing his commander to be dead, thought it was a trick.
Seibertron member, carytheone, has directed us to CarScoops.com, which has revealed that General Motors are to be auctioning off four of its Transformers Movie Camaros from Transformers: Revenge of the Fallen, Transformers: Dark of the Moon, Transformers: Age of Extinction and Transformers: The Last Knight. The car itself was as much of a star as the Transformers themselves and even the actors, so the interest is bound to be high. These are surely the auctions for “big bucks” Car - Read More
Part of the Legend Commander Collection sold at Transformers Expo, Convoy is a redeco of Robotmasters G1 Convoy. While most of the paint masks are identical to the original mold, other changes includes replacing the transparent parts into clear blue plastic, and the panel-lining on the grill is stripped off. Unlike the first toy, he does not include a pair of swappable 3mm fists, his missile launcher, or his Calamity Defenser weapon.
Released to commemorate the 10th anniversary of Revenge of the Fallen, this Studio Series Optimus Prime is a retool of the figure above, featuring many new parts, namely a new backpack, chest piece, and a pair of non-transforming fenders/legs, to better resemble his appearance in the first two movies. These new parts allow him to combine with Studio Series Jetfire to form "Jetwing Optimus Prime." His color scheme features a much higher contrast than the previous release. Instead of Energon Swords, he now comes with an ion blaster like that used in the battle of Mission City. He also comes with a cardboard backdrop display depicting the highway fight with Bonecrusher from the first Transformers film.
Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.
He now comes with a half-translucent gun which lights up and expands MechTech-style when the lever is pulled. Bizarrely, the main section of the weapon is sculpted to resemble Prime's forearm, with the unfolding part being his in-show gun. Additionally, he comes with an opaque sword resembling the Star Saber, which he can wield two-handed. The gun features a peg on its underside and a port on each side, while the sword features a peg and peg-hole on its hilt in addition to its 5mm handle. In robot mode, either accessory can mount on his hands, on either of his shoulders, or be pegged into either of his half-translucent forearms. In vehicle mode, the top of the vehicle mode cab can also fold back to reveal two additional peg holes, and there are three peg holes (including the fifth wheel hitch) on the back section, although the hitch tends to open up and not hold very well.
Long before the internet came along and ruined life as we knew it, Children amused themselves with the most primitive of toys. At the top of the food chain was the yo-yo. Believed to date back to around 500 B.C. in Greece, and even believed to have been used as a crude weapon in the Philippines, the yo-yo (pronounced yo-yo) made a roaring comeback in the 1920s as a toy, and to a lesser extent as a weapon.
Part of the first wave of TakaraTomy Lost Age: Movie Advanced toys, this Japanese-exclusive redeco of 2007 Transformers Protoform Optimus Prime is given a Generation 1-styled color scheme (which is also based on his appearances in IDW's Transformers: Foundation comic-book mini-series). Protoform Optimus Prime transforms into his "entry" mode. This mode somewhat resembles a cybertronic truck, with false wheels sculpted onto the sides, and Optimus Prime's trademark windows in front. His now-blue flame decoration piece fits to the back of the "vehicle", creating the illusion of a flaming comet's tail (Not sure if this was mean to represent his jetpack blast effect or his atmospheric entry heat effect, which is for no reason: entirely blue instead of hot red). The bottom of the vehicle has small wheels to roll the toy across smooth surfaces.
×