Early in this new series of encounters with Megatron, Red Alert contacted the Autobots on Earth and asked for Optimus Prime to join then on Velocitron. Ransack and Crumplezone tricked Hot Shot and Dirt Boss into believing that a race between them would determine which of them would be allowed to race Override for the Planet Cup. During the race, Ransack and Crumplezone caused a rockslide that buried Hot Shot. Hot Shot was saved when Optimus Prime, Vector Prime, and Landmine arrived, but Optimus was upset that Hot Shot had become involved with the locals. Clocker and Brakedown were eager to help the Autobots. After being unable to obtain the Planet Cup from Override herself, Optimus Prime endorsed Hot Shot's plan to win the cup in a race with the aide of the other Autobots. Ransack and Crumplezone were contacted by Megatron and were told to keep on eye on things. They also decided to enter the race, either to win the cup and cause as much damage as they could to the other racers. Override, Dirt Boss, Ransack, Crumplezone, Optimus Prime, Hot Shot, Red Alert, Landmine, Clocker and Brakedown participated in the qualification round. In the final episode of Transformers: Cybertron, Optimus Prime proposed a new Space Bridge project using the power of the four Cyber Planet Keys and the four great Cybertronian ships. Many Autobots and former Decepticons joined in the project. Jetfire was left in charge of Cybertron as Optimus Prime led the Atlantis with the Earth Cyber Planet Key, joined by Red Alert, Safeguard, Scattorshot, Leobreaker, Menasor, and Heavy Load.
The first Nightwatch Optimus Prime is an extensive redeco of the previously released Leader-class Optimus Prime, replacing most of his red and blue with different shades of blue and black. In fact, he resembles the original Diaclone Powered Convoy color scheme of Generation 1 Ultra Magnus's truck cab. The previously blue and red flames have been replaced with silver flames, while various other decos have been replaced by copper.
Part of the first wave of the Combiner Force assortment, Optimus is a roughly Scout-class sized figure that changes from his futuristic truck with a combiner chest that doubles as his spoiler into a robot in three four extremely simple steps. His individual robot mode only has limited articulation on his shoulders. He also has a little green arrow above the connector on the truck bumper indicating where to crash him to combine with other figures. A 5mm post hole on top of his vehicle mode can accommodate a compatible accessory or Weaponizer Minicon, though he cannot use it in his individual robot mode.
Partially constructed of die-cast metal, this small three inch figurine of Optimus Prime has a CGI-accurate sculpt compared to the larger toys, owing to the fact it does not need to transform at all. He is sculpted with his Ion Blaster in his right fist, and is articulated at the neck, shoulders and waist. He comes with a small movie-style Autobot sigil display stand.

This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.


What I find more interesting is who’s in this wave. Not only is there Hot Rod and Barricade in ’80s muscle car form, but Optimus Prime in his red G1 Peterbilt truck form (just with movie Optimus’ head! Maybe Bumblebee will explain the origin of his “rip off everyone’s face” fetish). Two versions of Bumblebee round out the wave, his traditional movie-verse Camaro and G1 VW Bug.
Released in the latter stages of the Cybertron toyline, this redeco of the Leader-class Optimus Prime figure introduced a new colour scheme that several other tail-end releases would emulate. Taking its name from the Japanese version of Cybertron and with a bio noting that this new body depicts Prime after he embarks on his galaxy-spanning mission at the end of the Cybertron cartoon, "Galaxy Force" Optimus Prime replaces the original toy's blue parts with black and the translucent blue with smokey clear, and moulds several—but not all—grey parts out of red plastic, including the toy's rifles, rail gun covers, missile launchers, and Super Mode leg guns. In the realm of new paint operations, Prime now sports all four Cyber Planet Key symbols on his shoulders, and his unique Matrix-shaped Cyber Key (now with the code lo9x) finally has a gold-painted border, as it had always had in Japan. Additionally, Prime's hip joints were tightened up with this release, making it easier to stand him up in Super Mode.

This Asian-exclusive redeco of AM-01 Optimus Prime features a sticker-less, extensive paint-job, coating his red parts and half-translucent arms in glossy metallic paint, painting his torso, shins, grille, fenders, and wheel rims silver, painting half of his feet in glossy black, having painted headlights, and featuring a unique "snake" insignia on his roof/right shoulder-pad, due to 2013 being the "Year of the Snake". O.P comes pre-assembled, lacks stickers, and features paint operations.

INFOBAR Optimus Prime (ANNIN) is a redeco of INFOBAR Optimus Prime (NISHIKIGOI), transforming into a recreation of the ANNIN edition of the INFOBAR cellphone. All-white in cellphone mode, he sports additional blue and red detailing in robot mode. Like the other figures in this line, he is not a working cellphone but can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.


Hot Rod first appeared in the Headmasters limited series as one of the Autobot crew led by Fortress Maximus. He became a Targetmaster in the fourth and final issue of the series. However, his Targetmaster partner is called Sparks, instead of Firebolt (though the UK comic would occasionally call him Firebolt). Hot Rod made sporadic appearances, with a few UK stories starring him as the lead, but most of those were set in the past or future. Kup's Story revealed the first meeting between Kup and Hot Rod, and how Hot Rod's influence shook Kup out of depression; and Ark Duty starred Hot Rod and set up the creation of Autobot City. Hot Rod debuted in the main continuity after the loss of many wars to the Underbase powered Starscream, as part of Fortress Maximus' group. He served as an eager soldier who idolized Optimus. However, he was killed during the Decepticon ambush on Klo in the last issue of the Marvel G1 comic, only to be resurrected by Prime and the Last Autobot.
It should be noted that in the lead up to the premiere of the Japanese translation of this series, TakaraTomy marketing director Masahiko Yamazaki indicated changes would be made to place it as a prequel to the 2007 Transformers live-action film. This would have made this version of Optimus Prime an earlier version of the film character. In practice however, the only changes that were made consisted of trimming for time to allow additional promotional material to be added to the start and end, and the name change of Bulkhead into "Ironhide" (with Ironhide becoming "Armorhide"). The future 22nd century Detroit setting and characterizations of the cast remain as they were in the original production.

A non-transforming model kit of Optimus Prime by Takara Tomy, sold exclusively in Japan. The kit comes with a pre-assembled inner frame that features a high rate of poseability similar to Master Grade Gundam model kits. The kit comes with two swords and two different sets of attachments for them: one set for the forearms and the other to replace the hands. Pre-ordered units of the first batch came with battle hooks.[138]

Convoy iPod Docking Bay pulls an all-white trailer of similar proportions to his vintage G1 load, with rear wheels and discreet propping feet so it can also stand alone. The trailer transforms (sorta), by rotating a substantial wedge of its full length 90 degrees, kinda like a rectangular Rubik's Cube. This exposes two small speakers and "reveals" an alcove (although a huge gap is still clearly evident in trailer mode) featuring an electronic port in which to plug an iPod or iPod nano, thus becoming a working iPod dock. The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer.
A mold for a standard LEGO piece costs anywhere from $50,000 to $80,000; over its lifetime, it will spit out some sixty million bricks. The cost of making the mold, spread out over all those bricks, is essentially zero. But when designers concoct a specialized piece and LEGO manufactures just fifty thousand of them, the molding cost rises to as high as $1 per piece. Including just a few of these specialized pieces, as LEGO did with unrelenting frequency during the Plougmann era, can potentially kill a LEGO set’s profit potential.
Available only via mail-order through Dengeki Hobby magazine, the "Limited Black Version" of G1 Convoy is just that: a straight black repaint of the G1 Convoy toy. He comes with all his original accessories, appropriately redecoed (including a silver version of his axe), as well as a gold-chromed version of the "Calamity Defenser" Solitarium weapon that came with Psycho-Orb.
Marissa and Prime are now on the run from the EDC and are also frequently attacked by the mysterious "Legion" Transformers. When faced with such foes, Marissa unleashes her "Kiss Player" ability by kissing Prime, fusing with him once again, increasing his power so that he can best their opponents. Prime is armed with the Surf Blade, a weapon formed out of Marissa's surfboard, wielded expertly thanks to the knife skills Marissa passes on to him when they merge.[18]
Like many other modern toys, Optimus was designed with an alternate head sculpt (based on the mouthplate-less face as seen on the show) intended for a later retool, which was gang-molded with the original head. At least one specimen sporting the mouthplate-less head has been found at retail, although since this occurrence has seemingly been limited to an isolated incident, it can be assumed to be a manufacturing error rather than a genuine variant.[6] The mouthplate-less head sculpt was eventually used officially for a later-wave redeco, Nightwatch Optimus Prime (see below).
Part of the first wave of Bot Shots Series 1 launchers, this repaint of Optimus Prime comes with a large trailer that pops open to form a battle station with a spring-loaded launching platform. He appears to have the same plastic colors as the single release, and the same set of paint operations, but his paint is done in different shades, having glossy dark blue paint and glossy bright red paint. The black part of his launcher is sculpted to look vaguely like the repair done that is part of Generation 1 Optimus Prime's repair bay.

The original Optimus Prime toy started life as the Diaclone toy, "Battle Convoy", created by a team of Takara designers who came on board when the original designer fell behind. This team included Hiroyuki Obara (listed as the sole creator on the toy's patent) and famed mecha designer Shōji Kawamori. The toy transforms into two major components; the first component being a red and blue White Freightliner WFT-8664T cabover semi-trailer truck partially composed of die-cast metal, and the second component being a large silver trailer of currently-undetermined model.
A giant statue of Optimus Prime in front of the Cybertron Archives holding two Golden Disks appeared on Cybertron in the Beast Machines series, but was destroyed by the Vehicons in the episode Fires of the Past. When show writer Bob Skir was asked what these two disks were he said that neither the statue nor disks were in the script, but he suggested that they were either the disks from Voyager 1 and Voyager 2 probes or that Optimus won them in the 2,395,989th Annual Cybertronian spelling bee.[7]
He reappeared in the third crossover, where he apparently acted as Optimus Prime's right-hand man. Putting a team together to look for the missing team that had journeyed to Earth (who had been captured by Serpentor and the Decepticons), he would later lead the combined G.I. Joe/Autobot force that rescued Optimus Prime. In contrast to his usual "youthful rookie" portrayal here Hot Rod seems to be in a high command position, outranking Ultra Magnus, Prowl and Ironhide among others. However, by the fourth crossover Hot Rod is forced to wait on Cybertron under Magnus's command as Optimus Prime journeys to Earth.
In one possible scenario, Optimus was surprised to see Beachcomber return to Autobot headquarters soon after his departure. Beachcomber informed Optimus that he had uncovered the Decepticon's newest hidden fortress, and he suspected that the Decepticons were up to something big. Optimus sent out Beachcomber once more, this time along with Powerglide and Windcharger to investigate the Decepticons' plot further.
Released in conjunction with Japanese cellphone maker au[10], au x Transformers INFOBAR Optimus Prime celebrates 15 years since the 2002 au Design Project that resulted in the INFOBAR cellphone, as well as the 10th anniversary of the live-action films. He transforms into a (non-functional) scaled-down replica of the 2002 au INFOBAR, and in lieu of cellphone functions, the figure can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is also non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
GT-R Prime was racing against GT-R Saber and GT-R Maximus when they were rudely interrupted by GT-R Megatron, a ruthless racer out to prove his worth by defeating all others. A fight broke out, but Prime interrupted it and convinced Megatron that they all shared the same need for speed, persuading him to settle things with a race instead. Transformers GT: Mission GT-R
Leader class figure, this is his form used in the Cybertron television series. Can combine with Leobreaker (or Nemesis Breaker) and/or Cybertron Wing Saber, and can use Metroplex's axe or Vector Prime's sword. At first, Optimus Prime's (Galaxy Convoy in the Japanese version) alt-mode is a futuristic firetruck, although some believe it to be some sort of mobile weapons platform (the show itself treats it as a firetruck). This can also transform into a wing mode, with wings and cannons on each side of the truck. In addition to his standard robot mode, he can combine with his rear 'trailer' section to form a heavily armed super mode. That trailer section can also form an independent weapons platform, usable by anyone. His face, designed in the classic Prime style, merges the two mouth-plate elements - a slitted version to expose his mouth, like Beast Wars Optimus Primal did on the television series and a full mouth-plate which can rise to cover it.[60]
The paint deco is... unfocused, to say the least. In vehicle mode, the grill, headlights, bumps (thus his feet) are painted silver, yet the red in the small Autobot insignia has been removed. There is silver paint on the fuel tanks (toy battery cover), but not on the other tool boxes and equipment in the same location. There is also silver paint on all 6 wheel rims, the air cleaners and the windscreen visor. In robot mode the silver paint is mainly located on his thighs and crotch, though in order to save on costs, the dark blue and gold paint on his thighs and knee joints have been sacrificed.
Two custom-made pieces (presented in robot and vehicle mode) by the Hasbro Transformers team as the grand prize for G4TV and Jumpcut's contest for fans to remix selected Transformers clips. Won by TFW2005.com member James Zahn, this one of a kind (well, two of a kind) piece is a almost fully vacuum-metallized Leader class Optimus Prime in red, silver and blue (based heavily upon Generation One Optimus Prime), presented with a custom display base with an embossed silver Autobot insignia and a perspex display case.

Rodimus Prime/Minor is a character who appeared in season 3 of the Transformers Animated series. He is a homage to the Generation 1 version of the character Hot Rod.[17] He wields an energon bow-and-arrow weapon of his own design.[18] On March 31, 2009, Derrick J. Wyatt, lead Transformers Animated Character Designer posted an image of Rodimus' vehicle mode, which is described as a futuristic muscle car that is mostly based on a 2008 Dodge Challenger with some elements of a 1969 Ferrari Daytona. This was revealed at the 2009 BotCon where Hasbro released an action figure of Rodimus Minor. It showed that the 2008 Dodge Challenger parts of Rodimus' vehicle mode were mostly based on the back, top, and sides of the vehicle, while the 1969 Ferrari Daytona parts were found in the front of the vehicle, most notably, the headlights.
The series begins when Optimus and his crew, after picking up a disillusioned ninja named Prowl, are sent to clear rubble from a space bridge passage. There, the Autobots stumbled upon the Allspark and are immediately attacked by Megatron's battle cruiser, the Nemesis. Through treachery by Megatron's second-in-command, Starscream, Megatron was fragged and the Autobots crashed on Earth in the early 21st century. After being in stasis under Lake Erie for 50 years, the Autobots awaken in Detroit of the near future, where they immediately discovered humans in need and became heroes of the city after stopping a Sumdac Industries experiment gone wrong. During the battle for the possession of the Allspark, Optimus goes offline after defeating Starscream, only to be revived by Sari Sumdac and her Allspark-infused key.
A Toys "R" Us exclusive, the U.S. release of Masterpiece Rodimus Convoy by Hasbro does not come with the detachable trailer, but is offered with his Targetmaster partner Offshoot (renamed from Firebolt due to trademark issues) and a remold of Optimus Prime's Matrix of Leadership, which does not fit in his chest. Like the Takara Tomy version, a smaller Matrix that fits in his chest is included. While the Japanese version is based on the animation design, the Hasbro redeco bears a closer resemblance to the original G1 toy. Parts of the figure's legs have been re-engineered after owners of the Japanese version complained that the hinges of the leg armor easily broke off. Masterpiece Rodimus Prime was first offered at the 2011 San Diego Comic-Con International.
If Optimus instead followed Prowl’s plan, he instructed his troops to transform into vehicle mode and play dead. The Decepticons, believing the Autobots’ ruse, disarmed themselves in order to carry out the Autobots’ “carcasses.” Now with the element of surprise against unarmed opponent, the Autobots Transformed and were able to easily defeat the evil robots.
© Andrew Sielen and Reality Prose, 2013. Unauthorized use and/or duplication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Andrew Sielen and Reality Prose with appropriate and specific direction to the original content.
During the Cybertronian Civil War, Sentinel Prime was killed. Prior to his destruction, he bestowed the Matrix of Leadership to Optimus Prime, who became the new leader of the Autobots. Despite being one of the youngest Cybertronian leaders, Optimus demonstrated extraordinary courage and wisdom in the war against the Decepticons. He: treated all lives with benevolence, fought for freedom and peace, and continues to fight to protect the weak and maintain their beliefs.
Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). The main torso-bot is based on Generation 1 Optimus's original body. Another limb-bot is based on live-action Optimus (Soundwave helmet), and the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
The subject of Bumblebee’s voice is a bit of a complicated matter. Just as he was the second Transformer ever seen on the original TV show, he was also the second to speak and did so in the loud and clear voice of Dan Gilvezan, who voiced him throughout the original series and animated movie. But by the time we get to the first live-action movie, he could only talk via audio clips because, according to a prequel comic, Megatron had destroyed his voice capacitor during a battle on Cybertron.
During the promotion of the Transformers films, Optimus Prime appeared in several commercials. Optimus Prime, along with other Transformers, were featured in several commercials for General Motors. Scenes with Optimus Prime were used in several General Motors commercials.[48] A commercial for the Discovery Channel featured Optimus Prime singing part of a promotional song.[49]

A large, non-transforming toy that features light & sound effects and voice tracks by Peter Cullen. The figure itself is a representation of Optimus Prime combined with Jetfire's parts - only designed for younger children. A lever on his waist extends his wings, and flying sounds are emitted when he is moved around off the ground. The Power Bots line replaces the 2007 Cyber Stompin' line of the first film.
This redeco of the Ginrai tooling of the Powermaster Optimus Prime figure (released concurrently with the 2001 reissue of the Ginrai figure) was a Toys R Us Japan exclusive black repaint, made to represent the original Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' color schemes.
×