After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.
In time-honored tradition, Prime's instructions depict the toy with an alternate "pretooled" head – in this case, a version with the faceplate deployed, used on the Platinum Edition and "Rusty" releases of the figure (see below). Additionally, his packaging stock photography depicts him with extra white/silver paint details, especially on his chest and wheel rims, as well as having gray upper arms with red details, among other differences.
This unusual iteration of Optimus Prime is a redeco of Beast Wars 10th Anniversary Optimus Primal, transforming into a robotic gorilla in the pseudo-technorganic-looking style of the other Jungle Planet toys. He comes with a Jungle Planet Cyber Key stamped with the code d7s9, which plugs into his flying surfboard accessory to reveal a spring-loaded missile launcher. His brown and cream deco seems inspired by Donkey Kong, while the scar over his beast mode eye seems intended to homage Peter Jackson's King Kong.
Released as part of the Bumblebee Energon Igniter's Speed Series line, this Optimus is a Legends/Legion-sized mold that transforms from robot into a Cab-over truck with the transformation scheme shared with the Transformers (2010) Reveal The Shield Legends Class toy, and he features 3mm compatible hands. Optimus' truck mode can also be attached with the Energon Igniters core, and due to the toy being lightweight, it can propel his vehicle mode forward very quickly, making him a fast-moving truck. Due to its simplified transformation, Optimus' robot shoulder parts ended up sticking out from his truck mode, and his upper cabin panel ends up being integrated with his head. Unlike most Speed Series toys, his Energon Igniter port is ends up under his right foot in robot mode rather than on his knee.
Or instead of adding a surface to the package, sell it with its own little plaque / platform. A really thin piece of hard plastic or something that is smooth as well as possibly having a graphic or something printed on it. And then market it as a collectible and only make so many of them. I'm thinking in the price range of $199-$299. I'm not sure the costs going into it, so I can't say.
Using the Spacebridge to travel to Earth, Prime was sidetracked when Megatron transported him to Unicron's body. Megatron attempted to cajole him into distracting Unicron long enough to transfer his consciousness into a new body. Prime refused until Megatron showed him what was happening on Earth. A massive Terrorcon invasion had devastated many of Earth's greatest cities, with the stalwart Autobot defenders nearly overwhelmed. Megatron offered to deal with the invasion if Prime would aid his rebirth. Out of options, Prime agreed, and battled Unicron's internal defences to disable a sensor, allowing Megatron's resurrection. As Megatron teleported to Earth to keep his end of the bargain, Prime, still inside Unicron, prepared to fight back.

Honestly, all the charts were done in Excel. I tried other methods but that was the easiest since all my data was in excel already. They are X,Y Scatter plots with sooth lines – heavily tweaked. Made the lines thicker which makes it look smoother and changed the layout a bit to make it clearer. The Excel defaults are ugly but if you spend enough time tweaking them you can get something passable.
The TakaraTomy version, part of the seventh wave of Japanese Prime toys, is dubbed Arms Master Optimus, uses darker, metallic plastics, casts the backs of his thighs in metallic red, replaces his metallic silver paint with glossy gray, and replaces a few of his paint operations with customer-applied foil stickers, such as his insignias, shins, headlamps, the tiny yellow lights on his torso, and the blue deco on his truck panel sides. He has also been retooled with additional 5mm pegs for his thighs, roof, and lower backpack, as well as ports for his forearms, shoulders, smokestacks, fuel tanks, and roof. Instead of the rifle, he comes with a very large Matrix which can tab onto his chest as armor or mount onto the back of the truck cab, with the Matrix also being covered in 5mm posts and holes so that Arms Microns can be attached to it. He additionally comes with a clear-blue "Shining" version of the Arms Micron, R.A., who can combine with the Matrix to form the colossal Matrix Saber.
Menasor cut off Prime's escape and handed him the Reflector trio, who confronted Prime with a hologram of Serpent O.R. The new Decepticon leader carried Megatron's memories and information downloaded from Soundwave, from which he learned of the Matrix of Leadership. Serpent O.R. offered Optimus a trade: hostages and peace if he handed over the Matrix. Optimus agreed.

The original Optimus Prime toy started life as the Diaclone toy, "Battle Convoy", created by a team of Takara designers who came on board when the original designer fell behind. This team included Hiroyuki Obara (listed as the sole creator on the toy's patent) and famed mecha designer Shōji Kawamori. The toy transforms into two major components; the first component being a red and blue White Freightliner WFT-8664T cabover semi-trailer truck partially composed of die-cast metal, and the second component being a large silver trailer of currently-undetermined model.
Categories: Art FeatherAstronBeelzeboss StudioBTS ToysCHMSDaCa ToysDMY StudiosDr. WuDream FactoryFansProjectFansToysGeneration ToyHeadrobotsHeerotoysmakerIGearImpossible ToysJunkion BlacksmithJustIToysKaziKOLDMaiden JapanMaketoysMastermind CreationsMasterShooter CollectiblesMech IDeasMGSPerfect EffectPlanet XPlay With This TooRenderformReprolabelsToyworldTransformersTFC ToysWarbotronX-TransbotsXovergenYom-GZenith Forge
This version of Optimus Prime is an all new mold, being the most movie accurate so far — or at least he was until Buster Prime came out. It comes with his two energon blades, and does not have a large gap at the back of the cab like the previous Leader-class Optimus Prime. It can combine with Leader class Jetfire to form Jetpower Optimus Prime. He is also very hard to transform. The process involves unclipping his firewall from his chest in a fashion that harkens to dissecting toys that lack screws, rivets or glue. In the meantime, he keeps saying, "I am Optimus Prime," over and over due to an overly sensitive voice clip trigger. Even the most die-hard Peter Cullen fan will be sick of his voice after five minutes of playing with this toy. That aside, the quality and articulation is top-notch and the poseability is amazing. Spring-loaded panels feature in his legs as well as ratcheting ball-and-socket ankles, G1 "transforming" sound effects, and multiple "Mech Alive" features raise the bar on this figure. Of note, the fists cannot accomodate standard accessories, and on test-shots of "Power Up" mode Prime has articulated fingers, like the 2007 toy, but this feature was dropped. Also, trying to transform Optimus from robot to vehicle mode can be very difficult at first.
Part of the first wave of Generations: Combiner Wars Voyager Class toys, this is a bigger, bulkier incarnation of Optimus Prime with a striking resemblance to Ginrai. He comes with two blasters which he holds via 5mm post. One of the guns is based on his trademark Ion Blaster, and both weapons store on the back of his vehicle mode as a makeshift engine block. His torso mode has several details that appear to be influenced by Energon Optimus Prime's super mode, including the head, chest, and thighs. In particular, the chest details are modeled after the Spark of Combination. He also features two pair of fake windows on his robot and gestalt chest halves. The combiner head can be used as a robot mode head if you're feeling silly.
Only available at ToysЯUs, this Optimus Prime is a redeco of the Classics figure. He features a cartoon/toy accurate deco on his truck/robot parts, and vacuum-metallized upper legs & front grille to evoke his original Generation 1 toy. Like every Classics Optimus Prime mold, he still features all of his accessories. This Optimus was packaged along with the redecoed Age of Extinction Optimus Prime.
Part of the first wave of Prime: Robots in Disguise Weaponizer Class toys, Optimus Prime is a large toy, similar in size to Leader Class figures from previous Transformers toylines. He features a simpler transformation and design compared to previous Leader-sized figures, with him having fake chest windows (again) and a simplified, hollow truck rear where his feet, arms, and fake chest windows are plainly visible. He comes with a blaster which can mount onto his hands, shoulder-pads, and the sides of his legs/truck rear.
One of the Mini-Con limb-bots (Soundwave helmet) is based on the original movie version of Optimus. The main torso-bot is based on Generation 1 Optimus's original body. Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). And the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
In a rare move, there were no brick and mortar store exclusives in Western markets for the regular Prime line. The "Rust in Peace" special edition of Terrorcon Cliffjumper was available at San Diego Comic-Con and Hasbro Toy Shop, while the "Dark Energon" series of translucent redecos was sold by online retailer BigBadToyStore. All of the "Dark Energon" toys were available at general retail in Singapore and Malaysia, and the Voyager Class figures were also available at general retail in the Philippines.
Beast Wars: Transformers had to be renamed in some countries, particularly Canada, because of concern over the word "war" in the title. So, in some countries, it was released under the title Beasties. Long-time Transformers fans noticed the prominence of the words "Beast Wars" over "Transformers", the latter appearing in small type under the former. The Transformers' fan base splintered into two groups as a direct result, with the one enjoying Beast Wars for what it was and the other refusing to accept it as official canon in the Transformers mythology.

At about 2/3 the size of the Smallest Transforming Transformers, this diminutive version of the original Generation 1 Optimus Prime toy is the smallest figure of the Autobot leader made to date. It was sold as part of Takara's blindpacked Mini Toy Shop Collection line, a series of miniaturized figures from numerous classic Takara toylines, including Transformers, Microman, Licca-chan, Choro-Q and others. Both of Prime's modes are represented by non-transforming individual figures, which come together in a two-pack. In-box, his truck form is even packed in a miniature recreation of his original Japanese packaging, which also includes a shrunken version of his sticker sheet. A tiny version of the original Takara Transformers catalog completes the set.
Thanks to Hasbro on their official site, which can be accessed by clicking any of the images below, we have news of 2 new members of the Energon Igniters class of figures, along with new images of 3 more! Up first, we have the 2 new reveals: Power Plus Soundwave and Ironhide! Soundwave looks a lot like he did in the movie, with a G1-esque robot mode, and a new van mode that is very Animated-esque, complete with a totally metal image of a jaguar and bird of prey on the side, evoking - Read More

Optimus Prime comes with many accessories in addition to the aforementioned Matrix, including the character's traditional laser rifle, now termed (and henceforth known as) an ion blaster. The initial release of the figure cast the ion blaster in grey plastic, but later assortments recast it in its more familiar black coloration. Other accessories include a transparent orange energon-axe that plugs into either wrist when Prime's fist is retracted, and even a non-transforming gun mode Megatron weapon, with removable stock, silencer and scope accessories, in homage to several instances in the Generation 1 cartoon when Prime was forced to wield his enemy. Pack-in bonuses that came with the figure included an inner cardboard tray illustrated to resemble the interior of Prime's Combat Deck, and in later releases, a small poster drawn by Pat Lee.

Released as part of a new line called Transformers: Tribute, Orion Pax is a redeco of Titans Return Sergeant Kup, and transforms from a red-and-blue Cybertronic pickup truck which is also an homage to Generation 1 Crosshairs's vehicle mode G1 Optimus's e-HOBBY toy. His Titan Master, retooled from Flintlock, features a new face that is based on the Thrilling 30 Orion Pax toy. As a redeco of the Kup mold, Orion Pax still suffers the leg panel misassembly.


The seldom seen 5th season re-airing of the show featured the G1 episodes retold by a stop-motion Powermaster Optimus Prime to the live-action youngster Tommy Kennedy. Although no back story was ever provided for how Prime became a Powermaster, the new sequences are said to take place after the four previous seasons. This indicates that Prime became a Powermaster in the original Sunbow continuity.
Optimus Prime grew concerned when Hound picked up a communication from Laserbeak that indicated the Decepticons had grown interested in a mysterious structure near a human village. Prime and a team of Autobots headed out to investigate, and they battled the Decepticons over the structure, which turned out to be a harmless windmill. Laserbeak's Fury
He and Metroplex were soon rescued by Bumblebee and Ratchet and they promptly escaped back to Earth, just in time to rescue Grimlock from a Decepticon hit squad. After being misled by a phony distress call, Optimus and his team had to face an assault on the Ark. They repelled the Decepticon attack, but Prime decided that the time was right to go to Cybertron and liberate the Autobots whom Shockwave had enslaved. The Autobots again used the space bridge to reach Cybertron, and mounted an assault of their own on the Decepticon fortress. After fighting their way through the defenses, Optimus and Bumblebee faced down Shockwave himself, defeating the Decepticon with some help from Grimlock. Transformers G1: Awakening
The largest Movie Optimus Prime toy (until Revenge of the Fallen, that is), Leader Class Optimus Prime features the most accurate representation yet of the CGI designs' complex transformation sequence, the only difference being the arms which are placed behind the cab while they constitute the hood in the CGI model. He transforms into a heavily-customized Peterbilt 379 conventional extended-hood, and unusually for a mainline figure, he has rubber tires on all his wheels. His Ion Blaster weapon is stored in the rear of the truck's bunk, exposed like an engine block. Though Optimus has no trailer, he has a hole where the fifth wheel (known among fans as a 'hitch') is sculpted in the rear of the truck, should owners find a suitable trailer to use. Due to safety reasons, the tips of his long smokestacks are made of rubber. A switch on top of the cab roof activates horn sounds and window lights.
This military-colors redeco of the Auto Roller Dirtbag was planned for late Generation 2 and widely solicited alongside fellow redeco Sargent Hound, but never saw release. Transforming into an "earth mover" dump truck, he has an auto-transforming gimmick activated by rolling his rear wheels; roll forward to go to robot mode, and back to dump truck. A switch on his back end separates the gears of the gimmick, allowing him to roll freely in either mode. In vehicle mode, his missiles can peg onto the front end of the dump-bed for storage. In robot mode, he has a twin spring-loaded missile launcher in his right arm, and a clamping "stun gun" claw on the left.
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More
The set also includes a redeco of Generations War for Cybertron Optimus Prime figure, which changes the original figure's dark red plastic to a brighter, more vibrant red, changes the gray plastic to a darker charcoal tone, changes the "windows" from gray to nearly black, and replaces most of the original figure's pink-ish red paint details (which were yellow on the redeco from the "Rage over Cybertron" three-pack) to teal.
On the rocky plains where practically every Transformer battle ever seems to happen, Prime arrived in his Powermaster body to back up three of his troops against Dreadwind and Darkwing. He combined with Hi-Q and transformed, attacking with his trailer's battle station mode. Optimus then combined with the trailer to become a "Super Powermaster" and continue the attack. Who won? Find out in Marvel Comics! Powermasters commercial
In 2016, the figure saw re-release with the Combiner Force packaging. Being the tenth use of the sculpt at this point, some instances of mold deterioration have affected the figure, including: the vehicle front's bumper (which affects the space on the head/front bumper transformation), the headlights, and/or the legs, and the hole on the left shoulder is also prone to develop a stress mark due to the right shoulder's slightly "thickened" peg. Although the re-released badge didn't seem to unlock Optimus Prime after it was scanned, a later update to the game amended this.
A extensive retool of Lockdown, transforming into a Lamborghini Centenario. An exclusive to Walmart stores and part of the "Autobots Unite" subline, While almost the entire figure has been remolded, the lower legs and feet remain unchanged. The figure is overall a bit taller in stature than the base mold and includes extra steps in the transformation which further differentiate the two. Uncommon for deluxe class toys, the figure does not include any weapons or accessories.
First Edition Optimus Prime is, as his title suggests, the first toy available to the public from the Age of Extinction toy line. Prime is an all-new Leader Class-sized figure, featuring his new Western Star "5700 OP" concept truck vehicle mode and his updated robot mode from the film (well, mostly based on his initial design rather than the final design in the movie). His transformation is much simpler than his counterparts from the previous three movie lines, being billed as transforming in "15 easy steps." His torso, shoulders, upper legs, and the vehicle mode grill are all completely chrome with the exception of minor blue and red details painted on his chest. However, this comes at the expense of his smokestacks and wheels being bare gray plastic, whereas they are chromed in the film. His simplified transformation also comes at the expense of having a very bulky "backpack" of kibble composed of the rear of the truck cab and the fuel tanks, limiting his shoulder and hip articulation. However, his Truck kibble can be detached from the main figure to form the majority of his vehicle mode on its own.
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More
Part of the second wave of Warrior class figures, this Deluxe-sized Optimus Prime transforms into a futuristic trailer truck. Due to his simple transformation scheme, he has a faux window chest in robot mode, while the end of the front trailer kibble has extra toes. Optimus Prime also comes with an axe, which was based on the Energon Axe weapon from the War for Cybertron game. Undocumented in the instructions, Prime's axe can store between his trailer, or plug into ports on either of his shoulders. His scannable Autobot insignia is on his robot mode left shoulder and is easily scannable while still in-package.
Part of the first wave of Age of Extinction: Generations Voyager Class toys, "Evasion Mode Optimus Prime" is an all-new figure based on the character's initial form in the film, transforming from a cab-over semi truck into a robot mostly similar to his previous movie design. The truck mode is heavily based on Generation 1 Optimus Prime's White Freightliner WFT alt mode in both sculpt and deco, although it draws a few details, such as the singular smokestack and wheel designs, from the heavily faded Marmon 97 seen on-screen. In robot mode, he sports faux-kibble windows and, amusingly, two false smokestacks. Unfortunately, due to being used with the transformation, he lacks the real elbow joint on the arm, which makes the lower section of the arm the only poseable section. Also, Optimus can wield weapons with longer posts while his arms are in a "default" 90° position.
Released as part of the first wave of the Energon Igniters Nitro Series, this Optimus Prime is a new Voyager-sized mold that converts from a robot based on his Age of Extinction body into a truck in 11 steps, and he features 5mm-compatible hands & articulation on his head, arms, and only his upper legs. He also features built-in Ion Cannons in this lower leg panels, activated in vehicle mode. He also comes with his own energon core, which is a different mold from his Power Plus toy.

Millions of years later, Optimus was one of the thirty-five Autobots rebuilt into modern machines by the ship"s computer. Some time later, Jazz reported that he had spotted Decepticon activity at a nearby construction site. Optimus decided to take a proactive angle to their war with the Decepticons, and led the entirety of his troops to the Decepticon base. Once there, they found themselves allowed in by Megatron, feigning a friendly demeanor. Not fooled by Megatron's claims that he was making an honest living heading a construction company, Optimus engaged the evil robots in combat, before being blasted out of the Decepticon base. Optimus and his troops were sent tumbling down the cliffside beneath their feet. The Autobots suffered only minor damage from the fall, and after getting patched up, moved out once more to stop Megatron's plan, now well under way. Megatron was holding millions of humans hostage in a bid to get the Earth to surrender unconditionally to the Decepticons.


The third United Optimus Prime toy is a redeco and slight retool of the Deluxe Class figure from Hasbro's 2010 Transformers toyline, itself an homage to Prime's Generation 2 "Laser" form. The toy features translucent blue plastic as opposed to Hasbro's orange, red paint is used on the biceps instead of blue paint, extra red paint applications on the knees like the original's sticker detail, and more broken-up red apps on the shoulders. Silver detailing was added to the cab mode on the grill, the bumper, and near the doors. The blue plastic in cab mode is now black plastic to make the figure more accurate to the Generation 2 original. The gray plastic is changed from the Hasbro version to more closely match the 2006 reissue of Laser Optimus Prime. Black paint was applied to the cab mode to mimic the fade from red to black on the original Laser Optimus, but still includes a flame deco like the Hasbro version, only in a different design. It lacks the roof-mounted rubsign of the Hasbro version, instead including Autobot insignias on the cab doors. (Disappointingly, they are Generation 1 insignias, rather than Generation 2 ones!) Additionally, a retool was made to the peg on the inside of his right shoulder, to make it shorter and wider than the Hasbro version, allowing it to move freely without hitting the torso, unlike the Hasbro release.
Part of the first wave of Age of Extinction: Generations Voyager Class toys, "Evasion Mode Optimus Prime" is an all-new figure based on the character's initial form in the film, transforming from a cab-over semi truck into a robot mostly similar to his previous movie design. The truck mode is heavily based on Generation 1 Optimus Prime's White Freightliner WFT alt mode in both sculpt and deco, although it draws a few details, such as the singular smokestack and wheel designs, from the heavily faded Marmon 97 seen on-screen. In robot mode, he sports faux-kibble windows and, amusingly, two false smokestacks. Unfortunately, due to being used with the transformation, he lacks the real elbow joint on the arm, which makes the lower section of the arm the only poseable section. Also, Optimus can wield weapons with longer posts while his arms are in a "default" 90° position.

In an amusing (but glaring) example of poor quality control in a Takara product, the back of the packaging features a small amount of Engrish, notably the word "kinetic" being written as "Kinetick". The bio also mentions the elemental metal as the "Cyber-Matter" living metal, which is used for the Aligned continuity family. Oddly, TakaraTomy's stock photo of the robot mode figure was later used as a cutout "battle figure" included with Telebi Magazine's Burning Megatron.
I wish I could FIND more of the toys - for some reason my area is a toy desert and it seems to be hard to find good TFs. Of the ones I've been able to find, my favorites are all CHUGs, because I end up wanting to get things that look closest to G1. (Sorry. I'm old, poor, and sentimental.) I have more luck at thrift stores than I do at mainstream stores, so I have a ragtag fleet of oddballs with missing parts/untranformables locked into robot mode, etc.
The main build of the set is a massive vehicle based on Optimus's truck cab, capable of seating a single Kreon in the driver's seat. Pushing the trailer-hitch on the back end towards the cab opens up the front grill, revealing a huge spring-loaded rocket launcher with rubber-tipped projectile. The cab can also stow the included stasis pod ussed to lock away the baddies.
A highly CG-accurate sculpt of Optimus Prime's head with a built in voice-changer. It also has several sound effects and quotes from the movie. The voice-changer has three settings, giving more accurate alteration of the user's voice (though this is still debatable; most voice changing technology is pretty crummy, at least in toys). Much like the Ultimate Bumblebee figure, this toy will hate your wallet too. While it only costs 30 bucks, if it's anything like another Hasbro voice changer, it will suck batteries up like they were some kind of square candy holder.
His trailer opens up into his Combat Deck, which features a missile-armed repair drone pod (with seating for one) mounted upon a boom lift arm. Situated in the base of this boom is a spring-loaded launcher that can be used to launch Roller out of the Combat Deck. Roller himself has seating for 4 passengers, and can be equipped to carry Optimus Prime's rifle or a fuel pump. The interior space of the trailer allows storage room for one Autobot car.

Like the previous Prime, it is loaded with features, though it ditches the first movie's Automorphing for the new Mech Alive gimmick. When a grey tab on his midriff is pressed, Prime's entire pectoral region "flexes", lights in his chest and eyes glow, and he declares "I am Optimus Prime" in Peter Cullen's voice. For the European release of the figure, to get past the language barrier, the Cullen sound clip is abbreviated to just "Optimus Prime"; in some regions, including Quebec and the UK (but only after a month or two), both versions were made available. A transformation sound effect activates when his torso is transformed, and once Prime is in truck mode, an almost unnoticeable button (a small square located beside the screw for the battery compartment, undocumented in his instructions) is revealed, which activates engine-idling noises.


Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[38] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[39]
×