The first reissue of the original Optimus Prime toy in North America since the Generation 1 toyline reached its end, this "Commemorative Series" edition of the figure was a Toys R Us exclusive. It was mostly identical to the original figure, save for some necessary modifications made for safety reasons: In the first instance of what would become a recognizable alteration to the mold, the toy's smokestacks were shortened, while the Combat Deck's firing missiles were elongated to prevent potential choking, as was the case with all other Commemorative Series figures' firing missiles. This release also had the trailer's launching feature removed.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.

Upon discovering that the Matrix was the key to destroying Unicron, Optimus Prime and Ultra Magnus went alone to face Unicron while the rest of the Autobots executed the plan to restore the original timeline. They hoped that at least one of these plans would be successful. Prime was injured in the confrontation with Unicron and, although his injuries were not mortal, he passed the Matrix to Magnus, who shed his outer armor and managed to complete the mission, destroying Unicron.
Another game was released for the Sony PlayStation 2 by Atari; simply titled as Transformers, it was based on The Transformers: Armada. The game's reception was mixed, particularly due to the popularity of a PS2 Transformers game released at the same time for a Japanese-exclusive market, though the Armada game was of a higher quality and featured much better gameplay. The game not released in America was based on the Generation 1 storylines.
This Turbo Change Series Optimus Prime toy is a slight redeco/retool of the Lost Age Series toy. Deco changes include omitting the flame tampos on his legs and shoulder, and added blue pinstripes on the Trailer/Wing Backpack to evoke his Generation 1 toy's trailer. This toy also features some new parts like the screen-accurate forearms, the command deck for the smaller Turbo Change Series toys, and the trailer's adapter. His usual Sword of Judgment is now replaced with a screen-accurate mold that is similar to the Armor Knight toy's sword, and he now features a new Vector Shield piece, which can convert into a battle axe.

One more thought: LEGO is a Danish company. The fluctuations in the price of LEGO such as the big bump around 1985-7 in Figures 1 and 2 could be because of a change in exchange rates. The conversion rate between the Danish Kronor and the US$ went from over 10 in 83 and 84 to less than 7 in 86 and 87. LEGO might have been slow to respond to changes in exchange rates, leading to the temporary bump. If you’d like to share data we can redo your graphs in DKK.

ROBOTKINGDOM.COM Newsletter #1462 Hi, Here is a quick update from www.robotkingdom.com.  #1 Hot Items! Flame Toys : Transformers Star Saber. Preorder. Available in May 2019. US359.90 http://www.robotkingdom.com/ftstarsaber.html Flame Toys [Furai Model] - Bumble Bee. Preorder. Available in May 2019. US44.90 http://www.robotkingdom.com/4897054512308.html Takara Transformers Masterpiece MP-34 Masterpiece - Read More


General Optimus Prime hailed from Primax 096.0 Beta. Ask Vector Prime, 2015/09/06 During the third Cybertronian war, General Optimus Prime profile card he fought on Earth against Megatron: in the Battle of Sherman Dam, the two fought directly but the battle would have gone against the Autobots if not for the arrival of the Dinobots. Ask Vector Prime, 2015/09/06 In the latter stages of the war, he upgraded himself with heavier armor and weaponry in order to match Megatron's flight and combination upgrade.
In "A Fistful of Energon", Optimus Prime is informed by Ultra Magnus about Starscream's escape from prison. He is quite upset when he has heard that Prowl set out in search for him on his own. He orders Prowl to return, but he disobeyed him. Later, Prowl is bound and abandoned by Lockdown, who wants to get the bounty that Megatron had set on Starscream. But Optimus Prime, together with Bulkhead and Ratchet, succeed in finding and releasing Prowl.
In the interim year, with the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.
The back story of the Transformers on ancient Cybertron is told in Transformers: Defiance. In this story, Starscream returns to Cybertron after encountering an enemy scout ship in the Eshems Nebula. After being repaired for minor damage by Ratchet, Starscream and Ironhide report to Optimus Prime and Megatron.[63] In issue #2, Optimus Prime is ordered by Megatron to counter-attack Cybertron's invaders, but instead, Optimus organizes a resistance to Megatron's decision. In issue #3, Optimus Prime, Jazz, and Prowl break into Megatron's quarters while he is away looking for clues to why he is acting so strangely. What they find is an ancient artifact that Megatron had restored.[64]

This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.

The instructions neglect to mention that the entire roof of the cab is on a concealed hinge which greatly eases the difficulty of Prime's transformation. For whatever reason, the instructions treat the toy as if the hinge does not exist, going so far as to show Prime's head magically clipping through his chest to transform. The instructions also neglect to mention that his heel/bumper pieces must be slid out until they click, making the figure just that bit more stable, and that the rotating truck door panels on his upper arms can be pulled further out (but not off) from their sockets, allowing more space for the panels to swing around his hood-arms during transformation.

Released as part of the Energon Igniters Power Plus Series subline, this Optimus Prime is a Scout-sized mold that converts from robot to truck based on his appearance in Age of Extinction in just a few steps. His only articulation is the swiveling upper arms & pivoting arm joints, and his fuel tanks also doubles as a flip-out cannons, activated in vehicle mode. As with all Nitro and Power Plus figures, Optimus also comes with an energon core, which allows his vehicle mode to propel forwards.
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.

In lieu of combining with the Prime Force, Optimus Prime can also merge with Energon Wing Saber in a similar fashion, with Wing Saber splitting into four components that connect to Prime as limbs. Wing Saber's red and white torso components can become arms for Prime while his legs attach to Prime's own, creating Prime's "Flight Mode", but the parts can also be swapped around, with Wing Saber's legs deploying large missile launchers and becoming arms to make Prime's "Fight Mode". Alternately, Prime can combine with Energon Omega Supreme to form what his packaging calls "Powerlinx Omega Supreme", but which the cartoon named "Optimus Supreme". The Prime Force drones can attach to four connectors on Optimus Supreme's body.
Part of the third wave of 2012-onwards Generations Legends Class toys, Thrilling 30 Optimus Prime is a new mold that is roughly the same size as a Cyberverse Commander Class toy. Both his truck and robot mode are based on his Don Figueroa-designed body from IDW's ongoing series, and features 5mm-compatible hands and roof. He comes with an Ion Blaster which has both 5mm and 3mm posts.
But it is scary to think that there is a strong possibility they will look at redoing almost every Masterpiece now if this is a success. The MP+ releases have me feeling tired. I don’t have to get them but I have a completionist mentality. But a redo... I’m almost ready to check out of MP completely. I waited so long to get six seekers done pretty well to me. Now there’s a chance they will redo them. And soundwave. I sure hope I’m just being a worry wart.
In 2007, the Optimus Prime of universal stream Primax 109.0 Beta encountered a mysterious messenger from another world: another incarnation of himself from a parallel dimension who left him with a warning. Two years hence, Megatron would bring the terrifying super-dimensional lifeform known as the "Beast of Time", the Hytherion, into their dimension to destroy Earth. The only thing that could battle the Hytherion was the power of the super-evolved multi-dimensional race of Cybertronians known as the Alternity. Prime agreed that when the danger appeared, he would join the Alternity in the fight.

This figure contains an unusual amount of sculpted detail on the inside of the plastic. The gorilla mode's chest has a ribcage, and the inside of the gorilla's face has a sculpted microphone, which lines up perfectly with the robot mode's head! Also, opening this toy's chest in robot mode reveals sculpted detail resembling the Key to Vector Sigma as it appeared in Beast Machines.
Part of the first wave of battle upgrade Hero Mashers toys, Optimus is a non-transforming robot who can swap any of his parts out with other Hero Mashers figure to create many combinations. He includes his iconic Energon axe, a large projectile-launching gun, another large gun, two missile packs, and an arm for Ultra Magnus. Optimus Prime also has a pointing right hand, which allows you to do a certain Optimus Prime pose in a Dreamwave Productions comic.
He comes with the Star Saber, which has a 5mm handle and a post on its hilt, as well as two spring-loaded, missile-firing "Ionic Pulse Launchers" (which are called "Eaglefire Missile Launchers" in the instructions). The launchers each feature a 5mm post, have flip open prods, and can peg onto the ports near the wheels on his robot back, giving him a pair of back-mounted rocket engines.
In lieu of combining with the Prime Force, Optimus Prime can also merge with Energon Wing Saber in a similar fashion, with Wing Saber splitting into four components that connect to Prime as limbs. Wing Saber's red and white torso components can become arms for Prime while his legs attach to Prime's own, creating Prime's "Flight Mode", but the parts can also be swapped around, with Wing Saber's legs deploying large missile launchers and becoming arms to make Prime's "Fight Mode". Alternately, Prime can combine with Energon Omega Supreme to form what his packaging calls "Powerlinx Omega Supreme", but which the cartoon named "Optimus Supreme". The Prime Force drones can attach to four connectors on Optimus Supreme's body.
These include two large guns, patterned after the new weapons included with the G2 version of the classic Optimus Prime toy, which can be attached to the trailer in a similar fashion to those of Powermaster Prime. Also included are two additional (blue) Prime heads, sculpted explicitly in the style of Generation 2 comic artist Derek Yaniger's interpretation of Prime, especially as seen on the cover of the first issue, one pristine and the other battle-damaged.

The success of Beast Wars and the change in storyline resulted in its second phase: Beast Machines. Like Beast Wars, the name Transformers was used only as a secondary title. While still a success, the storyline and direction borne by Beast Machines was questioned and criticized by the most ardent fans who knew the previous history of the Transformers. Also, there was a clamor for a return to the original idea of the Transformers, that of their being protean robots with nearly humanlike artificial intelligences who transformed into vehicles or devices.
Prime's trailer opens up into his Combat Deck, containing the scout drone, Roller. The interior of the Combat Deck features three pegs that can accommodate Prime's laser rifle, fuel pump and nozzle accessories, and seating for two Diaclone drivers. As its central feature, the Combat Deck features a missile-armed repair drone pod mounted upon a boom lift arm (featuring another cockpit for a Diaclone driver), which can also be extended through holes in the trailer's roof and front-end when it is closed. Situated in the base of the boom arm is a spring-loaded launcher that can launch Roller out of the Combat Deck and into action. Roller himself has seating for four Diaclone passengers, and features a port that can accommodate either Prime's rifle or the fuel pump. The interior space of the trailer allows storage room for one standard Autobot car, which can also be shot forward by the launcher.
×